• 제목/요약/키워드: $2^{nd}$ Resonance Frequency

검색결과 56건 처리시간 0.022초

외팔보의 동적응답과 진동모드 분석 (An Analysis of the Dynamic Response and Vibrational Mode for the Cantilevered Beam)

  • 김예현;고영준;강병용;장호경
    • 한국음향학회지
    • /
    • 제16권1호
    • /
    • pp.16-23
    • /
    • 1997
  • 강제진동에 의한 외팔보의 동적응답과 진동모드를 연구하였다. Bernoulli-Euler 이론과 유한요소법을 이용하여 외팔보의 고유진동수와 진동모드를 수치해석하고 실험으로 측정하여 비교하였다. 가진주파수를 1Hz에서 70Hz까지 변화시켜 외팔보의 1차, 2차 공진주파수를 구하고, 응답위치에 따른 진동 변위를 측정하여 진동모드를 살펴보았다. 실험결과에서 외팔보의 절점(node)이 1차모드에서는 0.2차모드에서는 0,0.786으로 측정되었다. 외팔보의 공진주파수와 진동모드에 대해 이론적으로 예상했던 결과와 실험으로 측정한 결과가 거의 일치하였다.

  • PDF

발전용 보일러의 후부 전열면 소음진동 저감에 관한 사례 연구 (A Case Study on The Reduction and Examination for Noise and Vibration of Backpass Heat Surface in the Power Plant Boiler)

  • Lee, Gyoung-Soon;Lee, Tae-Hoon;Moon, Seung-Jae;Lee, Jae-Heon
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.642-647
    • /
    • 2008
  • The boiler structure is determined by combustion characteristics and construction costs in the combustion chamber of a large commercial boiler. The heat transfer in boiler is composed of the radiation and the convection. The convective heat transfer has happened to back-pass heating surface. The combustion gas sequentially passes through the reheater tube, 1st economizer tube, and 2nd economizer tube. In case of being lowered in boiler height, we have to install additional tube bundle in back-pass heating surface for increasing the heat transfer of boiler, which causes the noise and vibration from combustion gas. When the combustion gas passes through the back-pass tube bundle in specified load of commercial boiler, this paper analyzes the acoustic characteristics between vortex-shedding frequency and natural frequency in tube bundle cavity. The case study reduce the resonance by changing natural frequency characteristics of tube-bundle cavity using a way to install ant-noise baffle in the direction of combustion gas flow.

  • PDF

청소기의 공력소음 특성 파악 및 저소음화에 관한 연구 (A Study on the Identification of Aeroacoustic Noise and Noise Reduction for a Vacuum Cleaner)

  • 전완호;백승조;김창준;허남건
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.633-638
    • /
    • 2002
  • The vacuum cleaner that has no dust bag generates very high level annoying noise. The dominant noise source is the 2$\^$nd/ BPF tone of the rotating impeller. In order to reduce the noise, we identify the acoustic characteristics and reduce the noise of the vacuum cleaner and centrifugal fan. The resonance phenomenon is observed in blade passages and we found out that the resonance frequency is very close to the 2$\^$nd/ BPF. In order to reduce this high-level peak noise, new impeller is designed in this paper. The trailing edge of new impeller is inclined and this makes the flow interactions between the rotating impeller and the stationary diffuser vane occurs with some phase shift. The performance of new impeller is similar to the old one but the overall SPL is reduced about 3.6dBA. The SPL of BPF is reduced about 6dBA and 2$\^$nd/ BPF is reduced about 20dBA. The vacuum cleaner, which uses newly developed centrifugal fan, generate more comfortable noise than the old model and the strong tonal sound was dramatically reduced.

  • PDF

전압제어 유전체공진을 이용한 K-대역 발진기 설계에 관한 연구 (A study on the design of a K-band harmonic oscillator using voltage controlled dielectric resonance)

  • 전순익;김성철;은도현;차균현
    • 한국통신학회논문지
    • /
    • 제21권12호
    • /
    • pp.3215-3226
    • /
    • 1996
  • In this paper a K-band harmonic oscillator competitive to ordinary Push-Push type oscillators is introduced. This oscillator is composed of two-X-band dielectric resonance circuits. To favor its harmonic generation, the load effect and the bias effect are studied to allow the maximum harmonic distortion. As results, the dielectric resonated load and the class A bias are used for the 2nd harmonic generation. analytical study for modelling of voltage controlled dielectric resonator is carried out with theoretical background. The performance of the circuit is evaluated by simulation using harmonic balanced method. The novel structure has ont only a voltage tuning circuit but also an output port at fundamental frequency as the function of prescaler for phase lockede loop application on the just single oscillation structure. In experimentation, the output freqneyc of the 2nd harmonic signal is 20.5GHz and the maximum power level of output is +5.5dBm without additional post amplifiers. the harmonic oscillator exhibits -30dBc of high fundamental frequency rejection without added extra filters. The phase noise of -90dBc/Hz at 100kHz off-carrier has been achieved under free running condition, that satisfies phase noise requirement of IESS 308. The proposed oscillator may be utilized as the clean and stable fixed local oscillator in Transmit Block Upconvertor(TBU) or Low oise Block downconvertor(LNB) for K/Ka-band digital communications and satellite broadcastings.

  • PDF

사각형 외팔보에서의 일대일 공진 (One to one Resonance on the Rectangular Cantilever Beam)

  • 김명구;박철희;조종두;이흥식
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.424-429
    • /
    • 2005
  • In this paper, the response characteristics of one to one resonance on the rectangular cantilever beam in which basic harmonic excitations are applied by nonlinear coupled differential integral equations are studied. This equations have 3-dimensional non-linearity of nonlinear inertia and nonlinear curvature. Galerkin and multi scale methods are used for theoretical approach to one to one internal resonance. Nonlinear response characteristics of 1st, 2nd, 3rd modes are measured from the experiment for basic harmonic excitation. From the experimental result, geometrical terms of nonlinearity display light spring effect and these terms play an important role in the response characteristics of low frequency modes. Dynamic behaviors in the out of plane are also studied.

  • PDF

정사각형 외팔보에서의 일대일 공진 (One to One Resonance on the Quadrangle Cantilever Beam)

  • 김명구;박철희;조종두
    • 한국소음진동공학회논문집
    • /
    • 제15권7호
    • /
    • pp.851-858
    • /
    • 2005
  • The response characteristics of one to one resonance on the quadrangle cantilever beam in which basic harmonic excitations are applied by nonlinear coupled differential-integral equations are studied. This equations have 3-dimensional non-linearity of nonlinear inertia and nonlinear curvature. Galerkin and multi scale methods are used for theoretical approach to one-to-one internal resonance. Nonlinear response characteristics of 1st, 2nd, 3rd modes are measured from the experiment for basic harmonic excitation. From the experimental result, geometrical terms of non-linearity display light spring effect and these terms play an important role in the response characteristics of low frequency modes. Nonlinear nitration in the out of plane are also studied.

다중 공진 광대역 수정된 모노폴안테나 (Modified Monopole Antenna for Multi resonance Wideband)

  • 최태일;범병균;임승우
    • 한국전자통신학회논문지
    • /
    • 제3권2호
    • /
    • pp.53-57
    • /
    • 2008
  • 도파로 급전 방법의 인쇄형 모노폴 구조를 응용하여 UWB대역인 이중 주파수 대역 프린트형 이중 모노폴 안테나를 설계 및 제작하였다. 이중대역을 얻기 위하여 기존의 단일 모노폴 구조를 수정한 이중 모노폴 구조를 제안하였다. 제안된 안테나는 기존의 모노폴 안테나와 동일한 무지향 복사 특성을 가지며 평면으로 구현되어 모노폴 안테나 보다 크기가 작고 높은 이득을 갖는다. 두개의 단일 모노폴은 상호 임피던스 매칭을 위한 스터브로 작용하여 임피던스 매칭이 용이하고 이에 따른 대역폭의 증가를 향상 시킬 수 있었다. 안테나의 대역폭은 VSWR$$\geq_-$$2를 기준하여 350MHz (1.69~2.04[GHz]z])와 2,670MHz (4.33~6[GHz]), 3980MHz (6.1~10.08[GHz])의 결과를 얻었다. 이는 PCS대역(1.75~1.87[GHz]) 과 UWB대역을 충족시킬 수 있다.

  • PDF

제2종 위상정합용 $KTiOPO_4$와 고리형 공동을 이용한 제2고조파 발진 (Second Harmonic Generation with a Type II Phase-Matched $KTiOPO_4$ and an External Ring Cavity)

  • 김경범;박주현;노재우
    • 한국광학회지
    • /
    • 제9권4호
    • /
    • pp.236-239
    • /
    • 1998
  • 진동수 안정화동 Nd:YAG 레이저, KTP 단결정, 그리고 외부 공명 공동을 사용하여 제2고조파 발생 장치를 제작하였다. 제2종 위상정합을 이용하는 경우 문제가 되는 정상광선과 이상광선 사이의 벗어남 각과, 두 광선이 모두 공동에 공명하게 하는 이중 공명의 조건을 결정의 온도와 광 입사각의 조절을 통해 최적화 하였다. 그 결과로써 318mW의 근원파에 대해 26mW의 제2고조파 출력을 얻을 수 있었다.

  • PDF

성덕대왕신종을 위한 가변형 명동의 설계 (Design of a Variable Resonator for the Sacred Bell of the Great King Seongdeok)

  • 김석현;정원태;강연준
    • 한국음향학회지
    • /
    • 제31권5호
    • /
    • pp.288-297
    • /
    • 2012
  • 본 연구는 성덕대왕신종의 공명효과를 극대화시키기 위하여 계절에 따른 기온의 차이를 보정할 수 있는 가변형 명동의 설계 모델을 제시한다. 성덕대왕신종의 종소리에서는 64 Hz의 1차 고유진동수와 168 Hz의 2차 고유진동수가 가장 중요한 성분이다. 두 주파수 성분을 대상으로 종체 공동, 간극, 명동으로 구성된 내부 음향공동계의 공명조건을 구한다. 이를 위하여 SYSNOISE를 이용한 경계요소해석을 통하여 내부공동의 음향 주파수응답 특성을 구한다. 외적요소로, 계절에 따른 기온 차이는 공명 조건에 크게 영향을 미친다. 그 결과 공명효과를 극대화시키는 명동의 길이는 계절에 따라 달라져야 한다. 이를 고려하여 본 연구에서는 기온 변화에 맞추어 명동의 길이를 종의 설치 현장에서 쉽게 조절할 수 있는 가변형 명동의 설계 모델을 제시한다.

폐목재 2차 파쇄기에 대한 설계 및 구조해석 (Design and Structural Analysis of 2nd Crusher for Useless Wood)

  • 이종선;임진섭
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2005년도 춘계학술발표논문집
    • /
    • pp.71-74
    • /
    • 2005
  • 본 논문에서는 폐목재의 재활용을 위한 1차 파쇄기의 다음 공정인 2차 파쇄기에 대해 경계조건과 하중조건을 적응하여 유한요소법에 의한 ANSYS로 구조해석과 모달해석을 수행하여 응력(stress), 변형률(strain)을 구하고 구조적 타당성을 검토하였다. 이는 안전성을 고려한 설계의 기초 자료가 되며 고유진동수(natural frequency)를 구하여 모터의 회전을 제어함으로서 공진(resonance) 현상을 피하는데 있다.

  • PDF