• 제목/요약/키워드: $0.22{\mu}m$ pore size

검색결과 30건 처리시간 0.026초

카본블랙을 첨가하여 제조한 다공성 BaTiO3계 세라믹스의 미세구조 및 PTCR 특성 변화 (Microstructure and PTCR Characteristics of Porous BaTiO3-based Ceramics Prepared by Adding Carbon Black)

  • 이기주;당동욱;조원승
    • 한국분말재료학회지
    • /
    • 제18권1호
    • /
    • pp.41-48
    • /
    • 2011
  • As a pore precursor, carbon black with different content of 0 to 60 vol% were added to (Ba,Sr)$TiO_3$ powder. Porous (Ba,Sr)$TiO_3$ ceramics were prepared by pressureless sintering at $1350^{\circ}C$ for 1h under air. Effects of carbon black content on the microstructure and PTCR characteristics of porous (Ba,Sr)$TiO_3$ ceramics were investigated. The porosity of porous (Ba,Sr)$TiO_3$ ceramics increased from 6.97% to 18.22% and the grain size slightly decreased from $7.51\;{\mu}m$ to $5.96\;{\mu}m$ with increasing carbon black contents. PTCR jump of the (Ba,Sr)$TiO_3$ ceramics prepared by adding carbon black was more than $10^5$, and slightly increased with increasing carbon black. The PTCR jump in the (Ba,Sr)$TiO_3$ ceramics prepared by adding 40 vol% carbon black showed an excellent value of $9.68{\times}10^5$, which was above two times higher than that in (Ba,Sr)$TiO_3$ ceramics. These results correspond with Heywang model for the explanation of PTCR effect in (Ba,Sr)$TiO_3$ ceramics. It was considered that carbon black is an effective additive for preparing porous $BaTiO_3$ based ceramics. It is believed that newly prepared (Ba,Sr)$TiO_3$ cermics can be used for PTC thermistor.

지구물질의 마이크로미터 단위의 삼차원 공극 구조 규명: 핵자기공명 현미영상 연구 (3-Dimensional ${\mu}m$-Scale Pore Structures of Porous Earth Materials: NMR Micro-imaging Study)

  • 이범한;이성근
    • 한국광물학회지
    • /
    • 제22권4호
    • /
    • pp.313-324
    • /
    • 2009
  • 지표-지각환경을 구성하는 지질매체의 구조와 성질의 정량적-체계적 이해를 위한 예비연구로, 매질을 구성하는 입자의 모양, 크기, 충전 밀도가 공극 구조의 특성과 매질의 성질에 미치는 영향을 알아보기 위해 입자의 모양이 구형인 글래스 비드와 모양이 불규칙한 실리카 젤을 이용하여 입자 크기와 공극률이 서로 다른 다양한 다공성 매질을 준비하였고, 핵자기공명 현미영상을 이용하여 약 $50\;{\mu}m$의 분해능으로 삼차원 영상을 획득하였다. 분석 결과, 지름 약 0.2~1.3 mm 크기의 입자로 구성된 다공성 매질의 비표면적은 2.5부터 $9.6\;mm^2/mm^3$, 공극률은 0.21에서 0.38, 투수율은 11.6에서 892.3 D이며, 이는 일반적인 미고결 샌드가 갖는 값의 범위에 해당된다. 비표면적, 공극률, 투수율의 관계는 Kozeny 식에서 예상된 경향과 비교적 일치하였다. 상자집계 프랙탈 차원은 공극률, 비표면적과의 관련성이 높으며, 공극률이 0.29~0.38일 때 비표면적이 약 2.5부터 $6.0\;mm^2/mm^3$까지 증가할수록 프랙탈 차원이 2.6에서 3.0까지 선형으로 증가하며, 공극률이 0.21~0.28일 때 비표면적이 약 2.5부터 $9.6\;mm^2/mm^3$까지 증가할수록 프랙탈 차원이 2.5에서 3.0까지 선형으로 증가한다. 실제 다공성 사암에 포함된 유체의 삼차원 구조를 핵자기공명 현미영상으로 영상화하였고, 이에 대한 비표면적은 $0.33\;mm^2/mm^3$, 공극률은 0.017, 투수율은 30.9 mD, 상자 집계 프랙탈 차원은 1.59로 계산되었다. 본 연구에서 제시된 것과 같이 핵자기공명 현미영상은 다양한 다공성 매질의 삼차원 공극 구조를 영상화할 수 있고, 삼차원 공극 구조에 대한 상자집계 프랙탈 차원은 본 연구에서와 같이 다양한 공극 구조에 대해 분석이 가능하며, 다공성 매질의 이동 특성을 나타내는 매개 변수들과 지진파 감쇠 등에 대한 조절 인자로 사용될 수 있을 것으로 기대된다.

침지형 정밀여과시스템을 결합한 이상 혐기성 시스템에 의한 유기물 제거율의 향상 (Improved Organic Removal Efficiency in Two-phase Anaerobic Reactor with Submerged Microfiltration System)

  • 정진영;정윤철;이상민
    • 대한환경공학회지
    • /
    • 제22권4호
    • /
    • pp.629-637
    • /
    • 2000
  • 고형물 함유 유기폐수의 효율적인 메탄에너지 회수를 위해서 이상소화 반응시스템에 정밀여과시스템을 결합하여 시험하였다. 본 실험에 사용된 막분리 시스템은 산발효조내에 침지시켜 압축공기로 주기적으로 역세척하였고 셀룰로오스재질의 $0.5{\mu}m$ 크기의 막공경을 가진 카트릿지 형태의 정밀여과막을 사용하였다. 메탄발효조는 플라스틱 충진물을 반응기부피의 반 정도 채운 AUBF (Anaerobic Upflow Sludge Bed Filter) 를 사용하였다. 합성폐수는 선분 5,000 mg/L을 기질로 사용하였으며 운전부하에 따른 COD 제거특성을 조사하였다. 산발효조의 HRT는 10일에서 4.5일까지 단계적으로 감소시켰고 이때의 유기물 용적부하는 0.5에서 $1.0kg\;COD/m^3-day$ 로 변회되었다. 한편, 메탄발효조의 HRT는 2.8일에서 0.5일까지 단계적으로 감소시켰고 이때의 유기물 용적부하는 0.8에서 $5.8kg\;COD/m^3-day$까지 변화되었다. 산발효조의 경우 체류시간 4~5 일에서 80% 이상의 우수한 산선환율을 나타내었다. 메탄발효조의 경우에는 장기간의 운전을 통한 슬러지의 입상화에 기인하여 유기물 부하의 변동에 크게 관련없이 95% 이상 (처리수 COD 300 mg/L 이하)의 우수한 COD 제거특성을 나타내었다. 막분리형 이상소화공정은 산발효조의 미생물농도를 증가시켜 산전환율을 향상시킬 수 있는 가능성을 보여 주었고, 복합형 염기성 반응기는 우수한 COD 및 SS 제거를 나타내었다.

  • PDF

수종(數種) 치과(齒科) 수복용(修復用) 복합(複合)레진의 세포독성(細胞毒性)에 관(關)한 실험적(實驗的) 연구(硏究) (AN EXPERIMENTAL STUDY ON THE CYTOTOXICITY OF SEVERAL COMPOSITE RESINS)

  • 명제근;이명종
    • Restorative Dentistry and Endodontics
    • /
    • 제14권1호
    • /
    • pp.25-40
    • /
    • 1989
  • This study was conducted to evaluate the influence of 5 microfilled composite resin to fibroblast cultivated from human pulp (age 13). Each composite resin was manually mixed and filled in cylinder. Resin filled cylinders were placed in dishes (35mm in diameter) containing 3 ml of ${\alpha}$-MEM. Filters (pore size 0.22 ${\mu}m$) to simulate dentin were also placed between the bottom of cylinder and the dish floor. Then stored in 5% $CO_2$ containing incubator for 1 and 2 weeks at the temperature 36.6 C. The results analysed after 1 and 2 weeks were as follows: 1. Experimental group except group 2, 2 weeks incubation cases showed the cytotoxicity compared to the control group in cell count. 2. After 2 week-incubation of group 1 and group 4, cell count was more decreased than 1 week cases and cytotoxicity seemed to be constantly influenced to the cell multiplication. 3. The cell growth rate of 1 week incubation in group 3 and group 5 was similar to the control group and recognized the cytotoxicities of these groups were mild. 4. The cell multiplication rate of 2 week incubation cases in group 2 was greater than control group.

  • PDF

막 증발법(Membrane Distillation)을 이용한 고농도 하·폐수처리 가능성 연구 (Feasibility study on the application of membrane distillation process to treat high strength wastewater)

  • 김세운;이동우;민경진;조진우
    • 상하수도학회지
    • /
    • 제29권2호
    • /
    • pp.261-269
    • /
    • 2015
  • In this study, we applied a membrane distillation process to investigate a feasibility of treating a wastewater with high concentration of organic matters including nitrogen and phosphorus. The laboratory scale experiment was performed by using a hydrophobic PVDF membrane with the pore size of $0.22{\mu}m$ and porosity of 75%. The installation was direct contact type where the temperature difference between a feed and permeate side was controlled to have a range from 20 to $60^{\circ}C$. We observed a flux variation and a concentration changes of COD, $PO{_4}^{3-}$-P, $NH_4{^+}$-N and conductivity of feed side as well as permeate side with various temperature differences (20 to $60^{\circ}C$), cross flow velocities (0.09 to 0.27 m/s) through the module, and pH (6.6 to 12.0) of the feed that has the initial concentration of COD about 1,000 mg/L, total nitrogen 390 mg/L, total phosphorus 10 mg/L, conductivity of $7,000{\mu}s/cm$. The results showed that the average flux was ranged from 4 to $40L/m^2/hr$ which was almost similar with the flux of NaCl and deionized water used as a feed solution. The lowest flux was obtained at the operating condition with the temperature difference of $20^{\circ}C$ and cross flow velocity of 0.09 m/s while the highest one was measured with $60^{\circ}C$ and 0.27 m/s. Above 99% of COD and $PO{_4}^{3-}$-P in the feed could be rejected regardless of an operating condition. However, the removal rate of ammonium nitrogen was varied from 64 to 99% depending on the pH of feed solution.

Bonding agent의 치수 섬유아세포에 대한 독성 연구 (THE CYTOTOXIC EFFECTS OF BONDING AGENTS ON THE HUMAN PULP FIBROBLASTS)

  • 박선희;민병순;최호영;박상진;최기운
    • Restorative Dentistry and Endodontics
    • /
    • 제16권2호
    • /
    • pp.99-117
    • /
    • 1991
  • The purpose of this study is to evaluate the effects of dentin bonding agents on the fibroblasts cultivated from human pulp tissue. The fibroblasts were cultured in DMEM/10%FBS medium. Whatman filter paper discs (6mm diameter) soaked with $2{\mu}l$ of dentin bonding agents were placed on a millipore filter (pore size $0.22{\mu}m$) contained in a 50mm Petri dish, and then, exposed for 10 minutes, 30 minutes, 1 hour, 6 hours, 12 hours, 24 hours, 4 days and 7 days in $37.^{\circ}C$, 5% $CO_2$ incubator. The results of the experiments were analyzed by counting the cells and measuring the protein contents at 1 day, 4 days and 7 days. The results of this study were as follows: l. CLEARFIL NEW BOND, LITE-FIL BOND, GLUMA 3 Primer and GLUMA 4 Sealer showed cytotoxicity compared to the control group in the cell counts and the protein contents. 2. GLUMA 4 Sealer showed the least cytotoxicity among the three dentin bonding agents. 3. The results of the cell count were simialr to the results of protein content measurement. 4. LITE-FIL BOND exhibited marked cytotoxicity during 1 day, but, the cytotoxicity was slightly reduced after 4 and 7 days. 5. In GLUMA 3 Primer group, it was not possible to count the cell numbers and measure the protein contents, but the degeneration of cells was observed under the inverted phase-contrast microscope.

  • PDF

단일집진법(單一集塵法)에 의(依)한 라돈 붕괴생성물(崩壞生成物)의 농도측정(濃度測定) (Measurement of Radon Daughters' Radioactivities by Using Single Filtering Method)

  • 장시영;노성기;홍종숙
    • Journal of Radiation Protection and Research
    • /
    • 제6권1호
    • /
    • pp.25-30
    • /
    • 1981
  • 단일집진법(單一集塵法)을 써서 공기부유진중(空氣浮游塵中)에 존재(存在)하는 라돈 붕괴생성물(崩壞生成物), 즉, RaA, RaB 및 RaC 의 방사능(放射能)(또는 농도(濃度))을 측정(測定)하였다. 이것은 단일집진장치(單一集塵裝置)를 이용하여 평균공격(平均孔隔)(mean pore size)이 $0.8{\mu}m$인 membrane 노지(瀘紙)에 채취(採取)한 시료(試料)의 전(全) 알파방사능(放射能)을 시차별(時差別)로 측정(測定)한 후 그 결과(結果)로부터 라돈 붕괴생성물(崩壞生成物)의 농도(濃度)를 Ci 또는 WL(working level) 단위(單位)로 산출(算出)하는 방법(方法)이다. 여기서는 농도외(濃度外)에도 농도치(濃度値)의 표준편차(標準偏差) 및 라돈 붕괴생성물(崩壞生成物)의 방사평형상태(放射平衡狀態)를 나타내는 방사평형인자(放射平衡因子)와 방사평형비(放射平衡比)를 구(求)하였다. Ci 및 WL단위(單位)로 주어진 라돈 붕괴생성물(崩壞生成物)의 농도(濃度)는 실험기간중(實驗期間中) 각각 $0.30{\sim}2.36pCi/l$$0.89{\times}10^{-3}{\sim}6.57{\times}10^{-3}WL$로서 시간적(時間的) 요동이 심하였는데 대개 하루중(中) 오전(午前)에 높고 오후(午後)에 낮은 현상을 보여 주었다. RaA, RaB 및 RaC의 농도산출(濃度算出)에 따른 표준편차(標準偏差)는 각각 ${\pm}57.75%,\;{\pm}22.32%$${\pm}31.29%$였으며 방사평형인자(放射平衡因子)는 평균(平均) 0.322였다. 그리고 RaA를 모핵종(母核種)으로 가정(假定)했을 때 각핵종간(各核種間)의 방사평형비(放射平衡比)는 대개 $C_1>C_2>C_3$인 것으로 나타났다. 여기서 $C_1,\;C_2$$C_3$는 각각 RaA, RaB 및 RaC의 농도(濃度)를 나타낸다.

  • PDF

하수처리수 재이용을 위한 직접접촉식 막증발법 적용 가능성 연구 (A Feasibility Study on Sewage Discharge Water Treatment for Water Reuse by Direct Contact Membrane Distillation)

  • 최용준;최지혁;신용현;조형락;손진식;이상호
    • 멤브레인
    • /
    • 제26권1호
    • /
    • pp.70-75
    • /
    • 2016
  • 본 연구에서는 하수처리수를 원수로 사용하여 직접 접촉식 막증발법을 적용하여 원수 온도와 원수 유량 변화에 따른 하수처리수의 COD, TN, TP, TOC의 제거율 변화와 여과플럭스의 변화를 측정하였다. 또한 하수처리수에 의한 분리막의 오염 가역성을 평가하기 위해 1차 증류수만을 사용하여 물리세정을 수행한 후 플럭스의 회복률을 측정하였다. 실험결과 원수의 온도 및 유량에 관계없이 원수가 3배 농축될 때까지 여과를 진행하였음에도 불구하고 하수처리수의 주요 오염물질인 COD, TN, TP, TOC에 대한 제거율이 92% 이상으로 높게 나타났다. 또한 비교적 낮은 온도인 $50^{\circ}C$$60^{\circ}C$에서 원수의 유량에 따라 최소 13.8 LMH에서 20.3 LMH로 높은 여과플럭스를 나타냈다. 그리고 높은 농축계수까지 여과 실험을 진행했음에도 불구하고 낮은 여과플럭스의 감소를 나타냈으며 1차 증류수를 이용한 짧은 시간 동안의 물리세정만으로 최소 90% 이상의 높은 여과 플럭스 회복율을 나타냈다. 따라서 하수처리수 재이용을 위한 공정으로 막증발법의 적용이 충분히 가능할 것으로 판단된다.

필터의 개발을 통한 해수 육상수조식 양식장의 환경개선에 관한 연구 III. 스크린필터 및 자외선 등의 운행에 따른 사육수의 정화효과 (The Development of Filter for Environmental Improvement in Land Based Seawater Fish Farm III. Purification Efficiency of Rearing Seawater by Screen Filter and Ultraviolet)

  • 강주찬;박수일;김성근
    • 한국수산과학회지
    • /
    • 제32권4호
    • /
    • pp.501-506
    • /
    • 1999
  • 육상수조식 양식장의 사육환경을 개선하기 위하여 청소를 하지 않은 상태에서 5개월 동안 유입수에 필터 (망목, 60$\mu$m) 및 자외선등 (조사량, 0.5 $mWS/cm^2$)을 설치$\cdot$운행하면서 수온, 염분, DO, 영양염류 ($NO_3-N,\;NO_2-N,\;NH_4-\;PO_4-P$), 부유물질, 탁도, 세균수 및 비브리오균수의 변화를 검토하였다. 본 시스템의 설치 운행에 따라 5개월 후의 사육수의 수온, 염분, pH, DO, 세균수 및 비비리오균수의 정화효과는 관찰되지 않았다. 그러나, 사육수의 부유물질 및 탁도는 필터를 설치하지 않은 실험구에서 실험종료시 각각 39.7$\~$41.2mg/$\ell$, 23$\~$24 FAU까지 상승하였으나, 필터를 설치한 실험구 에서 각각 21.6$\~$22.3mg/$\ell$, 16$\~$17 FAU가 증가하여 5개월 후 필터의 설치$\cdot$운행에 의해 각각 $43.8\~45.6\%$ (평균, $44,7\%$), $29.2\~33.2\%$ (평균, $31,3\%$)가 제거되었다. $NO_3-N,\;NO_2-N,\;NH_4-N$$PO_4-P$는 필터를 설치하지 않은 실험구에서 5개월 후 각각 7.95$\~$8.01, 2.98$\~$3.01, 3.87$\~$3.92, 2.35$\~$2,42$\mu$g-at/$\ell$까지 증가하였으나, 필터를 설치한 실험구에서는 각각 6.21$\~$6.30, 2.23$\~$2.30, 3.18$\~$3.23, 1.87$\~$1,96 $\mu$g-at/$\iota$까지 증가하여 필터의 설치에 의해 각각 $21.3\~21.9\%$ (평균,$21.6\%$), $24.1\~25.2\%$ (평균, $24.7\%$), $17.6\~17.8\%$ (평균, $17.7\%$) 및 $19.0\~20.4\%$ (평균, $19.7\%$)의 제거 효과를 보았다.

  • PDF

이장재의 세포독성에 관한 실험적 연구 (AN EXPERIMENTAL STUDY ON THE CYTOTOXICITY OF CAVITY LINERS)

  • 김정혜;김영해
    • Restorative Dentistry and Endodontics
    • /
    • 제15권2호
    • /
    • pp.77-92
    • /
    • 1990
  • The purpose of this study was to evaluate the cytotoxic effects of 6 cavity liners in vitro. Human fibroblasts were cultured in ${\alpha}$-MEM and each liner was manually mixed and filled in glass ring cylinder ($8{\times}8mm$ in diameter, in height). The cylinders filled with the liners were placed in the center of the dish (35mm in diameter) containing 3ml of ${\alpha}$-MEM. Millipore filters (pore size $0.22{\mu}m$) to simulate dentin barrier were also placed between the bottom of cylinder and the dish. Then the culture dishes were stored in 5% $CO_2$ containing incubator for 5 and 10 days at the temperature of $36.6^{\circ}C$. The results of the experiments were analyzed by counting the cells in the period of 5 and 10 days respectively, and were assessed by calculating the cell multiplication rate and the relative growth rate. The experiemntal groups and the control group were compared statistically. The results of the study were summarized as follows: 1. The cell number of Zinc oxide-eugenol was $(4.13{\pm}1.31){\times}10^4$ cells/ml at 5 days and $(4.32{\pm}1.61){\times}10^4$ cells/ml at 10 days. 2. The cell number of Cavitec was ($8.35{\pm}2.87{\times}10^4$ cells/ml and $(10.08{\pm}5.10){\times}10^4$ cells/ml at 5 and 10 days respectively. 3. The cell number of Dycal was $(13.56{\pm}3.89){\times}10^4$ cells/ml at 5 days and $(34.75{\pm}8.85){\times}10^4$ cells/ml at 10 days. 4. The cell number of life was $(11.46{\pm}3.32){\times}10^4$ cells/ml and $(21.92{\pm}6.18){\times}10^4$ cells/ml at 5 and 10 days. 5. The cell number of Base cement was $(13.73{\pm}3.73){\times}10^4$ cells/ml and $(36.68{\pm}5.20){\times}10^4$ cells/ml at 5 and 10 days. 6. The cell number of Dentin cement was $(13.58{\pm}3.90){\times}10$ cells/ml and $(66.95{\pm}24.09){\times}10$ cells/ml at 5 and 10 days. 7. The cell multiplication rate of zinc oxide-eugenol cements was significantly less than that of the calcium hydroxide and glass ionomer cement. (P < 0.05)

  • PDF