• Title/Summary/Keyword: $0^0$

Search Result 244,700, Processing Time 0.232 seconds

The Effect of Calcium Supplementation on Soy Sauce Seasoning and Cooking Meat (액상칼슘을 첨가한 육류조리용 간장양념 및 그 제조방법)

  • Lee, Syng-Ook;Yu, Mi-Hee;Choi, Jun-Hyeok;Im, Hyo-Gwon;Lee, In-Seon
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.42 no.6
    • /
    • pp.969-974
    • /
    • 2013
  • In this study, liquid calcium was used to develop a calcium-fortified soy sauce-based seasoning for meat and the quality characteristics of the seasoning and cooked meat were investigated. All seasonings with different amount of liquid calcium (0, 2, 4, or 8%) showed no significant changes in pH and titratable acidity at $4^{\circ}C$ for 9 days; however, the control seasoning and seasoning with 2% liquid calcium (Ca-2%) showed significant decreases in pH and increases in titratable acidity during storage at $20^{\circ}C$ for 9 days, compared to the seasoning with 4% (Ca-4%) and 8% (Ca-8%) liquid calcium. We also observed that during storage at $20^{\circ}C$, the numbers of total aerobic bacteria, lactic acid bacteria, and yeast were significantly lower in Ca-4% and Ca-8% seasoning compared to the control or Ca-2%. The calcium contents in cooked meat seasoned with the control, Ca-2%, Ca-4%, or Ca-8% were 2.16, 33.47, 54.72, and 58.23 mg/100 g, respectively. Sensory evaluations demonstrated no significant differences in flavor, taste, juiciness, texture, and overall acceptability between the cooked meat samples. These results suggest that soy sauce seasoning supplemented with liquid calcium (2~8%) effectively increases the calcium content in cooked meat without adversely affecting its taste, flavor, and juiciness. Thus, this type of calcium-fortified seasoning may be helpful in combating the lack of calcium in modern diets.

Effect of Black Garlic and Mugwort Extracts on Lipids Profile during Restraint Stress (흑마늘과 쑥 추출물이 구속스트레스를 가한 흰쥐의 체내 지질 성분에 미치는 영향)

  • Lee, Soo-Jung;Kang, Min-Jung;Shin, Jung-Hye
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.42 no.4
    • /
    • pp.577-586
    • /
    • 2013
  • This study investigated black garlic and mugwort extracts have anti-stress activity. The antioxidant activities of extracts from black garlic (BEP), mugwort (MEP), and three mixtures (MPA, 95:5; MPB, 90:10; MPC, 85:15, w/w% for BEP and MEP, respectively) were tested in vitro. DPPH and ABTS radical scavenging activities for the mixtures (MPA, MPB and MPC) were significantly elevated in a dose-dependent manner by the amount of mugwort extract. A restraint stress was imposed on six groups of Sprague-Dawley rats supplemented with an AIN-93 diet (RSC) or one of five kinds of hot water extract drinks containing (black garlic, RS1; mugwort, RS2; and mixtures of black garlic : mugwort at 95:5, RS3; 90:10, RS4, and a mixture of black garlic : mugwort : apple extract : xylitol=90.25:4.75:2:3, RS5; v/v%) for 4 weeks. The normal group was fed with the AIN-93 diet and not exposed to restraint stress. Food intake was higher in the group fed with garlic extract (RS1), while the body weight gain and food efficiency ratio did not significantly change. The total serum cholesterol content in the RS1 and RS2 groups was significantly lower than the RSC group (control), and the RS5 group was not significantly different compared to the RS3 group. The serum triglyceride content was significantly higher RS3~RS5 groups than RS1 and RS2 groups. In terms of HDL-C and LDL-C contents, AI and CRF in the serum were not significantly different between RS3 and RS5 groups. AST and ALP activities of RS1~RS5 groups were significantly lower than the RSC group. The liver total lipid and cholesterol contents of RS1~RS5 groups were significantly lower than RSC group, and triglyceride content was significantly lower in the RS1 group. Glycogen in the liver tissue was significantly higher in the RS2 and RS3 group compared to the RSC group. These results show that the intake of a mixture of black garlic and mugwort extracts may be effective in the alleviation of hyperlipidemia caused by restraint stress.

Analysis of Enhancement Effect and Attachment Ability of Beneficial Intestinal Microflora in Puffed Grain Foods Using Confocal Laser Scanning Microscopy (곡물 소재 팽화식품에서 장내 유익균의 증진 효과 분석 및 공초점 현미경을 이용한 부착능 평가)

  • Jeong, Myeong-Kyo;Oh, Do-Geon;Kwon, Oh-Sung;Jeong, Jun-Young;Lee, Ym-Shik;Kim, Kwang-Yup
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.46 no.9
    • /
    • pp.1071-1080
    • /
    • 2017
  • This study examined the adhesiveness of beneficial intestinal bacteria to whole-grains using confocal scanning laser microscopy (CLSM), to demonstrate the prebiotic effects of whole-grains, and to develop prebiotic puffed snacks with these whole-grains. CLSM has been used to observe the adhesiveness of Lactobacillus acidophilus, which belongs to beneficial intestinal bacteria, to whole-grain powders using optical sectioning techniques. The enhanced effects on the growth of beneficial intestinal bacteria with the hot water grain extract were verified using an indirect count method. Finally, a puffed snack was produced with the prebiotic effect and the quality was evaluated by checking the chromaticity and degree of hardness. As a result, L. acidophilus exhibited adhesive ability to whole-grain powders and growth of selected beneficial intestinal bacteria were improved significantly. The Hunter L value of the developed puffed snack increased when seasoning was added. The hardness of the puffed snack with seasoning was higher than that of the control. The results of a sensory evaluation showed that the puffed snack with seasoning was highly rated in the overall preference compared to the control.

Changes in spatial organization of Korea by the construction of Seoul-Pusan railroad (京釜線 鐵道建設에 따른 韓半島 空間組織의 變化)

  • ;Joo, Kyung-Sik
    • Journal of the Korean Geographical Society
    • /
    • v.29 no.3
    • /
    • pp.297-317
    • /
    • 1994
  • This study demonstrates the changes in the spatial organization of Korea by the construction of Seoul-Pusan railroad. This Seoul-Pusan line, which is the most important one in Korea was constructed in 1905. The original plan of the line was selected to cross the main traditional roads to control the entire Korean peninsular and to mobilize the Korean commercial potentials. It was the line to exploit the staples and to expand the Japanese market in Korea. In accordance with the contracts between Japan and Korean government, Korean government had to supply the lands for railroad, office, and service facilities. That was one of the important reasons that Korean government had been broken down. The main findings of this study are as follows: 1. The Seoul-Pusan railroad line was constructed Japanese colonial policy which emphasized three main purposes; the first was to reorganize the economic space and to collapse the traditional Korean markets for Japanese ruling, and the second was to find out the military supply routes, and the third was to search for the transcontinental line for China and Siberia. As the results, the old Korean pedestrian routes, which were the Eastern, the mid, the westren, and the Samnam route lost their functions. 2. Japanese requested for Korean government usually ten times of wider space for the site of stations than the needed one. The land was expropriated, and constructed the new centers aparted from the original Korean towns. In this process Japanese got the most developmental and windfall profits. The newly constructed centers were for Japanese immigration and the town service facilities which would be used to control the Korean financial market. At last, they easily converted the Korean spatial economy into Japanese colonial one, which made to reinforce the sphere of Seoul-Pusan line. 3. Japanese planned the stations as the central points in Korea. So the railroad stations were located apart from the centers of towns, to avoid the Korean resistances, and to maximize their profits. The mean distance from staiton to 'the town center is about 1km while the Japanese case is 0.6km. 4. The pattern of present Korean railroads is not the 'X type'. Because the Honam line is not the trunk one. So, we could call the Korean railroad pattern as the 'Ip(Chinese character 入) type' . The operational effects of Seoul-Pusan line brought out the concentration of the national economy to this line as Japanese planned. And the polorization had occurred between this line and the other parts of Korea. For twenty years (1910-1930), the transported freights were increased about 5 times. In 1930, the total freight of Seoul-Pusan line became 2, 010, 444 metric tons. If we examine this process, the underconstructing Seoul-Pusan express electric railroad should avoid adjacent this line to reduce the regional and ecological imbalance. 5. The forms of centers on the Seoul-Pusan line were classified into six types in relation to station, town center, and built-up area; the compact (integrated) type, the elongated one, the splited (independent) one, the absorbed one, the consolidated one, and the declined one. All types of these towns might be developed in accordance with the centrality, railroad function, and the other transportational functions. 6. The Seoul-Pusan line plays the most important role among Korean railroads but the ratio of passenger and freight become lower because the effiects of other inaugurated railoads the different transportation modes such as trucks and cars would be got more merits in competition. 7. The results of cluster analyses on the cities of railroad stations showed the rudimentary urban systems in 1910 and 1930. In 1930, the cities were classified into three groups; the group of small cites, the intermediate (developing) city-group, and the special city-group. In 1930s the spatial organization and urban system of Korea were similar to the present ones. We call appreciate that these were the effects of the Seoul-Pusan line.

  • PDF

Splenectomy in Hereditary Spherocytosis in Childhood (소아에서 유전성 구상 적혈구증의 비장 적출술)

  • Huh, Young-Soo;Kim, Chang-Sig;Do, Byung-Soo;Suh, Bo-Yang;Hah, Jeong-Ok
    • Journal of Yeungnam Medical Science
    • /
    • v.11 no.1
    • /
    • pp.42-48
    • /
    • 1994
  • Among the erythrocyte membrane defects, hereditary spherocytosis is the most common. The erythrocyte membrane defect results from a deficiency of spectrin, the most important structural protein in red cell. Hereditary spherocytosis often presents with hemolytic anemia, jaundice, moderate splenomegaly. Diagnosis is established by the presence of spherocytes in the peripheral blood, reticulocytosis, an increased osmotic fragility, and a negative Coombs test. In children, splenectomy is usually performed after age 6 years but can be done at a younger age if warranted by the severity of the anemia and the need for frequent transfusions. In the period December 1987 to Agust 1993, 9 patients with hereditary spherocytosis underwent splenectomy and the following results were obtained. 1. Nine patients were comprised of five males and four females. 2. Five patients(55.6%) had been admitted to our hospital during age 6-10 years. 3. Four of the nine patients had autosomal dominant inheritance with variable expression. The other five patients had no known inheritance. 4. The diagnosis of the spherocytosis was based on the increased osmotic fragility and increased autohemolysis of the erythrocytes, as well as on the appearance of spherocytes in the peripheral blood smear. 5. In all cases splenectomy was performed. Two patients had concomitant gall stones and choledocholithiasis, respectively. One patient with concomitant gall stones underwent simultaneous cholecystectomy and splenectomy. The other patient associated with choledocholithiasis underwent splenectomy, cholecystectomy, choledocholithotomy, and T-tube drainage. 6. Complete hematologic recovery was obtained by the splenectomy in all cases. 7. Postoperative complication was not occurred.

  • PDF

Foundation Methods for the Soft Ground Reinforcement of Lightweight Greenhouse on Reclaimed Land: A review (간척지 온실 기초 연약지반 보강 방법에 대한 고찰)

  • Lee, Haksung;Kang, Bang Hun;Lee, Su Hwan
    • Journal of Bio-Environment Control
    • /
    • v.29 no.4
    • /
    • pp.440-447
    • /
    • 2020
  • The demand for large-scale horticultural complexes utilizing reclaimed lands is increasing, and one of the pending issues for the construction of large-scale facilities is to establish foundation design criteria. In this paper, we tried to review previous studies on the method of reinforcing the foundation of soft ground. Target construction methods are spiral piles, wood piles, crushed stone piles and PF (point foundation) method. In order to evaluate the performance according to the basic construction method, pull-out resistance, bearing capacity, and settlement amount were measured. At the same diameter, pull-out resistance increased with increasing penetration depth. Simplified comparison is difficult due to the difference in reinforcement method, diameter, and penetration depth, but it showed high bearing capacity in the order of crushed stone pile, PF method, and wood pile foundation. In the case of wood piles, the increase in uplift resistance was different depending on the slenderness ratio. Wood, crushed stone pile and PF construction methods, which are foundation reinforcement works with a bearing capacity of 105 kN/㎡ to 826 kN/㎡, are considered sufficient methods to be applied to the greenhouse foundation. There was a limitation in grasping the consistent trend of each foundation reinforcement method through existing studies. If these data are supplemented through additional empirical tests, it is judged that a basic design guideline that can satisfy the structure and economic efficiency of the greenhouse can be presented.

The Effects of Work-Life Balance on Corporate Performance: Mediating Effect of Product Innovation in Venture SMEs (벤처중소기업의 일과 생활의 균형이 기업성과에 미치는 영향: 제품혁신의 매개효과)

  • Bae, Hoyoung
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.10 no.4
    • /
    • pp.49-57
    • /
    • 2015
  • This research is to analyze the mediating effect of product innovation between work-life balance (work-family balance, work-leisure balance and work-development balance) and corporate performance in venture SMEs. We test four hypothesis. First, we test the hypothesis that work-life balance has a positive effect on product innovation. Second, we test the hypothesis that product innovation has a positive effect on corporate performance. Third, we test the hypothesis that work-life balance has a positive effect on corporate performance. Fourth, we test a positive mediating role of product innovation between work-life balance and corporate performance. For this research, we administered the questionnaire surveys, and got the 162 effective data of korean venture SMEs. We use CFA and SEM analysis of research model by AMOS 18.0. As a result, we can find the four meaningful results. First, work-life balance, especially only work-development balance, has a positive effect on product innovation. Second, product innovation has a positive effect on corporate performance. Third, the relationships between work-life balance (work-family balance, work-leisure balance and work-development balance) and corporate performance are no significant after the mediating variable (product innovation) is added. Fourth, product innovation has a positive mediating effect between work-life balance, especially only work-development balance, and corporate performance. Although this research has some limitations of generalization because of the limited size of samples, we has meaningful information related to the venture companies in the academic and business field. Additionally, the Multiple Indicator Multiple Cause(MIMIC) model is recommended in the future research.

  • PDF

The Impact of M&As with a Start-up on Shareholder Wealth (상장기업과 스타트업과의 인수합병이 주주의 부(富)에 미치는 영향에 관한 연구)

  • Cho, Sung-woo;Song, Hyunju;Jung, Jin-young
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.11 no.6
    • /
    • pp.1-9
    • /
    • 2016
  • In this study, we investigate the announcement effects of M&As with a start-up as a target firm on shareholder wealth of an acquiring firm. We use M&A events in KOSPI or KOSDAQ market between 2002 and 2014 after the financial crisis. Among the total 1436 mergers and acquisitions that took place domestically during this period, 1383 cases were selected as cases to be studied, excluding 53 cases where acquiring firms were unlisted firms. The results of the analysis are as follows: First, as a result of a comparison between the acquiring firms' CARs of the whole sample group(n=1383) occurred during the (-2, +1), (-5, +2), (-10, +5) periods of M&A announcement date(t=0) and the sub-sample group(n=468) where the target firms are start-ups which were established within five years, the acquiring firms of the whole sample group do not show significat CARs, while the acquiring firms of the sub-sample group show the significantly positive CARs. This suggests that M&A with start-ups have a positive effect on firm value of acquiring firms. Second, when merging unlisted start-ups, the acquiring firms show positive CARs, showing that there exists a listing effect in the merger of start-up. Third, merging the start-ups belonging to the high-tech industry shows the higher CARs than the case of merging the start-ups belonging to the non-high-tech industry. This study has great significance as the first in Korea to investigate the effect of M&A announcement with a start-up.

  • PDF

An Analytic Case Study on the Management of an Upper-level General Hospital(2010-2012)

  • Park, Hyun-Suk;Lee, Jung-Min;Baek, Hong-Suck;Lee, Jun-Ho;Park, Sang-Sub
    • Journal of Korean Clinical Health Science
    • /
    • v.2 no.1
    • /
    • pp.1-16
    • /
    • 2014
  • Purpose. For a more efficient hospital management, this study aims to provide basic data so that the hospital management and staff in charge of hospital administration may systematically classify and collect hospital information, by analyzing the ordinary characters of an upper-level general hospital system and its common-type balance sheet, common-type profit and loss statement and financial ratio. Methods. By using information about an upper-level general hospital in C Province, provided by Alio(www.alio.go.kr), a public organization information provision site, Health Insurance Review & Assessment Service(www.hira.or.kr) and Ministry of Health and Welfare(www.mw.go.kr), this study analyzed 3 year's data from 2010 to 2012 and provided basic data by analyzing the ordinary characters of an upper-level general hospital system, and its common-type balance sheet, common-type profit and loss statement and financial ratio. Results. After analyzing the ordinary characters, common-type balance sheet, common-type proft and loss statement and financial ration of this general hospital, based on the 2010 to 2012 data, this study came to the following conclusions. Firstly, out of all the 1,069 hospital staff, there were 272 doctors working for 24 medical departments, out of whom the majority was 33 physicians. Most of the nurses were third-class ones, and about 2,000 outpatients and 600 inpatients on average were treated per day. Secondly, as a result of analyzing the common-type balance sheet, this study discovered that intangible assets out of fixed assets accounted for 41%, the majority, out of which usable and profitable donation asset buildings were of great importance, and the liquid assets increased more in 2012 than 2011. In the financial structure, the ratio of liquid liabilities was over 50% out of all the liabilities in 2012, and the ratio of purchase payables was high as well. The ratio of fixed liabilities reached up to 40%, out of which the retirement benefit appropriation fund was quite high. The capital was over 80%, but the surplus was in a deficit state. Compared to the capital, the ratio of total liabilities was about 90%, which indicates the financial structure of this general hospital was vulnerable. Thirdly, as a result of analyzing the common-type profit and loss statement, this study found out that the medical profits from inpatients were higher than profits from outpatients. The material cost was related to the medical quality of this general hospital, and it was as high as 30% out of the total costs and was about 45% of the labor cost. This general hospital showed 10% in the ratio of non-medical profits, and it seemed because of government subsidies. The ratios of medical profits and current net income were gradually changing for the better in 2012, compared to 2011. Lastly, as a result of analyzing the financial ratio, it was found that the liquidity ratio kept decreasing, from 110.7% in 2010 and 102.0% in 2011 to 77.2% in 2012. Besides, it was analyzed that the liquidity ratio and the net working capital ratio greatly decreased, while the quick ratio and the liquid ratio kept decreasing. Conclusions. 1. It is necessary to take the risk management into more consideration, and particularly, it is needed to differentiate and manage the levels of risk in detail. 2. By considering the fact that investments into hospital infrastructures were mostly based on liabilities, it is needed to deal with the scale of losses when evaluating risks. 3. By reflecting the character that investments into hospital infrastructures were based on liabilities, it is necessary to consider the ratio of ordinary profits as well as the ratio of operating profits to sales, and it is also important to consider sales productivity factors, such as the sales amount per a sickbed, by comparing them with other hospitals. As for limitations of this study, there may be some problems in terms of data interpretation because of the lack of information about the number of inpatients and the number of outpatients per year, which are needed for the break-even point analysis. Besides, to suggest a direction for the improvement of hospital management through analyses, non-financial factors should be reflected, such as the trend of economy, medical policies, and politic backgrounds. However, this study only focused on the common-type balance sheet, common-type profit and loss statement and financial ratio, so this study is actually limited to generalizing all the factors by analyzing public data only.

A Study on LRFD Reliability Based Design Criteria of RC Flexural Members (R.C. 휨부재(部材)의 L.R.F.D. 신뢰성(信賴性) 설계기준(設計基準)에 관한 연구(研究))

  • Cho, Hyo Nam
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.1 no.1
    • /
    • pp.21-32
    • /
    • 1981
  • Recent trends in design standards development in some European countries and U.S.A. have encouraged the use of probabilistic limit sate design concepts. Reliability based design criteria such as LSD, LRFD, PBLSD, adopted in those advanced countries have the potentials that they afford for symplifying the design process and placing it on a consistent reliability bases for various construction materials. A reliability based design criteria for RC flexural members are proposed in this study. Lind-Hasofer's invariant second-moment reliability theory is used in the derivation of an algorithmic reliability analysis method as well as an iterative determination of load and resistance factors. In addition, Cornell's Mean First-Order Second Moment Method is employed as a practical tool for the approximate reliability analysis and the derivation of design criteria. Uncertainty measures for flexural resistance and load effects are based on the Ellingwood's approach for the evaluation of uncertainties of loads and resistances. The implied relative safety levels of RC flexural members designed by the strength design provisions of the current standard code were evaluated using the second moment reliability analysis method proposed in this study. And then, resistance and load factors corresponding to the target reliability index(${\beta}=4$) which is considered to be appropriate level of reliability considering our practices are calculated by using the proposed methods. These reliability based factors were compared to those specified by our current ultimate strength design provisions. It was found that the reliability levels of flexural members designed by current code are not appropriate, and the code specified resistance and load factors were considerably different from the reliability based resistance and load factors proposed in this study.

  • PDF