• The Journal of the Convergence on Culture Technology
• /
• v.3 no.3
• /
• pp.31-36
• /
• 2017

We are made up to the variation of the structure modeling of the stratum corneum by the skin on the hydration. The given skin structure is consist of the control level of the intercellular route and transcellular route, and is confirmed to the variation of the modeling for algorithm. Hydration condition is consisted to modeling by the size, form and combination, that skin impedance is appeared to result the value of measurement by the several layer such as forms of ${\xi}-R-SC-RH$, ${\xi}-R-SL-RH$, ${\xi}-R-SG-RH$, ${\xi}-R-SS-RH$ and ${\xi}-R-SB-RH$. Hydration condition is showed to the alteration difference value of S-Corneum, S-Lucidum, S-Granulosum, S-Spinosum and S-Basale. And, composition condition was constructed with the alteration modeling that was established to separate the division parts for conversion system. We will be possible to progress the improvement effectiveness of the skin and to consist of the continuous hydration control system for functional on the skin. We will be possible to progress the improvement effectiveness of the skin and to consist of the continuous penetration control system for functional energy on the skin.

• Korean Journal of Logic
• /
• v.17 no.1
• /
• pp.1-32
• /
• 2014

Both 5.52 and 5.521 of the Tractatus Logico-Philosophicus raise several questions. In this paper I will explicate Wittgenstein's concept of generality by answering such questions. These questions and problems are closely intertwined. I will try to show what follows. It is ${\xi}$-conditions that are most decisive on the concept of generality of the Tractatus. Except Ramsey, commentators such as Anscombe, Glock, Kenny etc. failed in accurately grasping the Wittgenstein's thoughts concerning ${\xi}$-condition and their claims are not fair at all. Futhermore, from a view point of history of logic, 5.52 has very important significances. That is to say, it anticipates for the first time a possibility of infinitary logic and the concept of universe of discourse in model theory.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.991-994
• /
• 2003

Electronic Paper용 무기소재로 $TiO_2$ 나노입자를 적용하기 위해서는 분산시 침전문제, 입자의 전기영동 속도향상을 위한 충분한 $\xi-potential$확보, 분산제 첨가시 안정적 결합을 위한 acidic site의 확보등의 문제가 해결되어야 한다. 이를 위해 저온균일침전법으로 $TiO_2$ 나노입자를 제조하였고, 폴리머 체인을 통하여 encapsulation하여 최적의 분산과 전기영동조건 확보를 위한 공정조건에 대해 연구하였다. 실험결과 다양한 분산매에 계면활성제를 1.0wt% 첨가시 유전율상수가 2.5인 분산매에서 가장 좋은 $\xi-potential$을 얻을 수 있었으며 이를 바탕으로 acidic site에 따른 폴리머 체인의 흡착실험 결과 pH $1{\sim}2$의 조건에서 제조된 $TiO_2$ 나노입자의 경우가 체인과의 흡착정도가 가장 좋아 분산특성을 향상시킬 수 있었다.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.219-224
• /
• 2002

We consider the problem y"=a(x,y)(y-b), y(0)=0, y'(1)=g(y(${\xi}$), y'(${\xi}$)), (0${\xi}$ fixed in(0,1)) as a model of steady-slate heat conduction in a rod when the heat flux at the end x = 1 is determined by observation of the temperature and heat flux at some interior point ${\xi}$. We establish conditions sufficient for existence, uniqueness.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.4
• /
• pp.309-312
• /
• 2002

Motivated by the problem of steady-state heat conduction in a rod whose heat flux at one end is determined by observation of the temperature and heat flux at some point ${\xi}$ in the interior of the rod, we consider the problem y"(x)=a(x, y(x))y(x) (0$${\lim_{x{\rightarrow}{\infty}}}y(x)=0,\;y^{\prime}(0)=g(y({\xi}),\;y^{\prime}({\xi}))$$ for some fixed ${\xi}{\in}(0,{\infty})$. We establish conditions guaranteeing existence and uniqueness for this problem on the semi-infinite interval [0,${\infty}$).

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.4
• /
• pp.303-307
• /
• 2002

We consider the problem y"=a(x,y)(y-b), (0$$y(0)=0,\;y^{\prime}(1)=g(y({\xi}),\;y^{\prime}({\xi})),\;{\xi}$$ fixed in (0,1). This is a model of steady-state heat conduction in a rod when the heat flux at the end x=1 is determined by observation of the temperature and heat flux at some interior point ${\xi}$. We establish conditions sufficient for existence, uniqueness, and positivity of solutions.

• Korean Architects
• /
• s.572
• /
• pp.118-121
• /
• 2016

저번 회에서는 Barclays Center의 그린루프의 디자인 과정을 개략적으로 살펴보았습니다. 소음 저감의 목적으로 인하여 도출되었던 두 가지의 변수(새로운 루프의 중량과 두 겹의 루프사이에 위치하는 빈 공간)및 기존의 바클레이 센터가 가지고 있는 물리적인 특성(파라펫 및 기존 루프의 형상)을 고려하여 design surface를 설정하였고, 중량에 대한 조건 및 주변의 고층 주거빌딩들로 인해 일반적인 루프와는 다른 미적인 특이성을 고려하여 그린 루프라는 큰 방향을 제시하고, 양방향 곡면의 특성을 가지는 루프의 지오메트리와 시공 상의 복잡함과 공기의 단축을 위해 모듈로 이루어진 시스템을 제안하게 되었습니다. 이번 회에서는 루프의 디자인을 진행함에 있어서 어떠한 제약 조건이 있었으며 그러한 제약 조건들이 최종적인 루프 디자인 및 패턴에 어떠한 영향을 미쳤는지, 그리고 이러한 과정에서 파라메트릭 툴이 어떻게 사용되었는지에 대해 자세히 살펴보도록 하겠습니다. 이어서 다음 회에서는 디자인 측면에서가 아닌 pre-construction의 측면에서 시공상의 시행착오를 줄이고 공기를 단축하기 위한 목적으로 파라메트릭 툴의 사용하여 시뮬레이션을 했던 과정에 대해 자세히 알아보도록 하겠습니다.

• Journal of radiological science and technology
• /
• v.31 no.2
• /
• pp.123-127
• /
• 2008

Purpose: As the demand of a simple and precise method increases to evaluate the performance of the inverter type x-ray unit, we evaluated the usefulness of the recently-introduced X-ray Multi-Function Test Device (moldel : Xi (unfors)-prestige). Method: We compared the performance of X-ray Multi-Function Test Device (XMFTD) which is non-inveasive type device with the performance of Dynalyzer III that has been most widely used inveasive type measure device. Result: X-ray output dose was increased a little in the XMFTD, but both devices were below the performance evaluation standard, 0.002 in the output reproducibility. Linearity of XMFTD were below 0.1 which means that Dynalyzer III showed more excellency in linearity. As the the accuracy of exposure factor, 1.8 and 2 tube voltage, 2.01 and 2.3 tube current were measured. The exposure time was also measured by 0.01 sec ${\pm}10%$. Both devices were within the acceptance of performance evaluatioin standard. Conclusion: We proved the usefulness of X-ray Multi-Function Test Device (model: Xi (unfors)-prestige) to evaluated the performance on reproductibility and linearity of X-ray output and accuracy of exposure factor of inverter type unit.

• Journal of Convergence Society for SMB
• /
• v.4 no.1
• /
• pp.17-29
• /
• 2014

The wireless capsule endoscopy played an important role as the evolutionary medical device to solving the difficulties such as diagnosing the intestine diseases. Due to the limited size and functions, it has some drawbacks. The most obstacle thing is the disability of self-motion, it means that it cannot provide the speed problem. Hence, the characteristics of human digestion system is briefly introduced, especially the intestine, to get the information of endoscopy dynamics. Next, in order to make an abstraction of the condition, a new dynamic friction model called LuGre model is introduced and clearly analysed to get the characteristics and the usage of the model. By the consideration of parameters that are tightly related with the real situation of the capsule endoscopy. The Matlab Simulink was applied to build the model and verified by the simulation to discover the features.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.91-99
• /
• 2017

Domestically developed concrete storage casks include an internal canister to maintain the confinement integrity of radio-active materials. In this study, we analyzed the depth of flaws caused by loads that propagate canister weld cracks under normal, off-normal and accident conditions, and evaluated the maximum allowable weld flaw depth needed to secure the structural integrity of the canister weld and to reduce the welding time of the internal canister lid of the concrete storage cask. Structural analyses for normal, off-normal and accident conditions were performed using the general-purpose finite element analysis program ABAQUS; the allowable flaw depth was assessed according to ASME B&PV Code Section XI. Evaluation results revealed an allowable canister weld flaw depth of 18.75 mm for the concrete storage cask, which satisfies the critical flaw depth recommended in NUREG-1536.