• Journal of the Korean Mathematical Society
• /
• v.53 no.4
• /
• pp.869-893
• /
• 2016

We construct the extension of a hyperelliptic K3 surface to a Fano 6-fold with extraordinary properties in moduli. This leads us to a family of surfaces of general type with $p_g=1$, q = 0, $K^2=2$ and hyperelliptic canonical curve, each of which is a weighted complete inter-section inside a Fano 6-fold. Finally, we use these hyperelliptic surfaces to determine an 8-parameter family of Godeaux surfaces with ${\pi}_1={\mathbb{Z}}/2$.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2003.06a
• /
• pp.179-179
• /
• 2003

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.27-28
• /
• 2008

• 대한치주과학회:학술대회논문집
• /
• 2006.11a
• /
• pp.101-102
• /
• 2006

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.335-335
• /
• 2012

금속 박막과 PI film 과의 접촉력을 증가시키기 위하여 remote - type modified dielectric barrier discharge (DBD) module을 이용하여 대기압 플라즈마 표면 처리를 실시한 결과, 접촉각이 매우 낮게 형성됨을 관찰 할 수 있었다.

• Journal of Distribution Research
• /
• v.17 no.4
• /
• pp.29-53
• /
• 2012

As so many marketers get to use diverse sales promotion methods, manufacturer and retailer in a channel often use them too. In this context, diverse issues on sales promotion management arise. One of them is the issue of unplanned buying. Consumers' unplanned buying is clearly better off for the retailer but not for manufacturer. This asymmetric influence of unplanned buying should be dealt with prudently because of its possibility of provocation of channel conflict. However, there have been scarce studies on the sales promotion management strategy considering the unplanned buying and its asymmetric effect on retailer and manufacturer. In this paper, we try to find a better way for a manufacturer in a channel to promote performance through the retailer's sales promotion efforts when there is potential of unplanned buying effect. We investigate via game-theoretic modeling what is the optimal cost sharing level between the manufacturer and retailer when there is unplanned buying effect. We investigated following issues about the topic as follows: (1) What structure of cost sharing mechanism should the manufacturer and retailer in a channel choose when unplanned buying effect is strong (or weak)? (2) How much payoff could the manufacturer and retailer in a channel get when unplanned buying effect is strong (or weak)? We focus on the impact of unplanned buying effect on the optimal cost sharing mechanism for sales promotions between a manufacturer and a retailer in a same channel. So we consider two players in the game, a manufacturer and a retailer who are interacting in a same distribution channel. The model is of complete information game type. In the model, the manufacturer is the Stackelberg leader and the retailer is the follower. Variables in the model are as following table. Manufacturer's objective function in the basic game is as follows: ${\Pi}={\Pi}_1+{\Pi}_2$, where, ${\Pi}_1=w_1(1+L-p_1)-{\psi}^2$, ${\Pi}_2=w_2(1-{\epsilon}L-p_2)$. And retailer's is as follows: ${\pi}={\pi}_1+{\pi}_2$, where, ${\pi}_1=(p_1-w_1)(1+L-p_1)-L(L-{\psi})+p_u(b+L-p_u)$, ${\pi}_2=(p_2-w_2)(1-{\epsilon}L-p_2)$. The model is of four stages in two periods. Stages of the game are as follows. (Stage 1) Manufacturer sets wholesale price of the first period($w_1$) and cost sharing level of channel sales promotion(${\Psi}$). (Stage 2) Retailer sets retail price of the focal brand($p_1$), the unplanned buying item($p_u$), and sales promotion level(L). (Stage 3) Manufacturer sets wholesale price of the second period($w_2$). (Stage 4) Retailer sets retail price of the second period($p_2$). Since the model is a kind of dynamic games, we try to find a subgame perfect equilibrium to derive some theoretical and managerial implications. In order to obtain the subgame perfect equilibrium, we use the backward induction method. In using backward induction approach, we solve the problems backward from stage 4 to stage 1. By completely knowing follower's optimal reaction to the leader's potential actions, we can fold the game tree backward. Equilibrium of each variable in the basic game is as following table. We conducted more analysis of additional game about diverse cost level of manufacturer. Manufacturer's objective function in the additional game is same with that of the basic game as follows: ${\Pi}={\Pi}_1+{\Pi}_2$, where, ${\Pi}_1=w_1(1+L-p_1)-{\psi}^2$, ${\Pi}_2=w_2(1-{\epsilon}L-p_2)$. But retailer's objective function is different from that of the basic game as follows: ${\pi}={\pi}_1+{\pi}_2$, where, ${\pi}_1=(p_1-w_1)(1+L-p_1)-L(L-{\psi})+(p_u-c)(b+L-p_u)$, ${\pi}_2=(p_2-w_2)(1-{\epsilon}L-p_2)$. Equilibrium of each variable in this additional game is as following table. Major findings of the current study are as follows: (1) As the unplanned buying effect gets stronger, manufacturer and retailer had better increase the cost for sales promotion. (2) As the unplanned buying effect gets stronger, manufacturer had better decrease the cost sharing portion of total cost for sales promotion. (3) Manufacturer's profit is increasing function of the unplanned buying effect. (4) All results of (1),(2),(3) are alleviated by the increase of retailer's procurement cost to acquire unplanned buying items. The authors discuss the implications of those results for the marketers in manufacturers or retailers. The current study firstly suggests some managerial implications for the manufacturer how to share the sales promotion cost with the retailer in a channel to the high or low level of the consumers' unplanned buying potential.

• Korean Journal of Veterinary Research
• /
• v.35 no.2
• /
• pp.317-326
• /
• 1995

The purpose of this study was to establish a method for in vitro culture of C parvum isolated in Korea by determination of suitable cell model to complete development of this parasite. The result obtained were summerized as follows: 1. To determine the most suitable cell line, six types of cell line were examined by microscopy. All cell lines were infected with C parvum and showed the highest infection score in HmLu cells. 2. The staining methods including DMSO-modified acid-fast(A-F) stain, hematoxylin-eosin(H & E) stain and immunofluorescence antibody(IFA) stain were applied to examine the infection of C parvum in cell culture. These staining methods were possible to examine the infection of C parvum in cell culture. The most sensitive one was IFA staining technique. 3. Developmental stages of C parvum in HmLu cell were observed. After the initial 8 hour incubation period, some trophozoites were observed. The meronts and gametes were appeared at 24-48 hour post inoculation(PI), and oocysts were observed firstly at 48-72 hour PI. 4. In H & E stain, the parasite appeared as basophilic within parasitophorous vacuole membrane(PVM) and lying in cytoplasm at near the nucleus of the host cells. It was able to distinguish the type I, type II meronts and gametes. 5. In DMSO-modified acid-fast stain, specific stained parasites were appeared firstly after 48 hour PI. The parasites were showed with different degrees of staining bright red color within PVM. 6. The endogenous stages of parasites in HmLu cell recovered at 48, 96, 120 and 144 hour after inoculation were reacted with rabbit immunized serum in immunofluorescence antibody and avidin-biotin complex peroxidase staining technique.

• Journal of Plant Biotechnology
• /
• v.49 no.4
• /
• pp.331-338
• /
• 2022

Sunflower (Helianthus annuus L.) protoplasts were isolated from seven-day-old etiolated hypocotyls of 10 A line and four-week-old fully expanded young leaves of PI 441983 line in vitro seedlings using an enzymatic method. Purified protoplasts were collected by filtration and floatation in sucrose solution. Semi-solid protoplast culture was performed using the L4 regeneration protocol with various culture media and plating densities to achieve the highest efficiencies for protoplast culture of hypocotyl and mesophyll protoplasts of 10 A and PI 441983 lines, respectively. The concentrations in liquid L'4M medium and different plating densities were evaluated in two types of cytokinins, the adenine-type 6-benzyladenine (BA) and the phenylurea-type thidiazuron (TDZ). The highest colony formation was achieved in both sunflower lines when 0.5 mgL^-1 BA and 0.5 mgL^-1 TDZ were applied with a high plating density (3 × 10⁵ protoplasts mL^-1). These conditions led to 38.45% and 39.40% colony formation for hypocotyl protoplasts of the 10 A line and mesophyll protoplasts of the PI 441983 line, respectively. Moreover, many hypocotyl protoplast-derived colonies developed into micro-calli. In addition, superior development of both sunflower protoplasts was observed with all plating densities when BA was used in combination with TDZ. This finding will be applicable to future sunflower hybrid production via somatic hybridization.

• Korean Journal of Veterinary Service
• /
• v.47 no.2
• /
• pp.73-79
• /
• 2024

Bovine viral diarrhea virus (BVDV) is distributed in cattle worldwide and causes significant economic losses to the livestock industry. Identification and remove of BVDV persistently infected (PI) cattle is very important to control BVDV infection in cattle herd. The objective of this study is to investigate the infection status of BVDV infection in Korean native cattle (Bos taurus coreanae) farms located in Jeonbuk State. From 2021 to 2022, a total of 1,497 samples were collected from 17 cattle farms and tested for BVDV antigen using a commercial ELISA kit. By the first ELISA testing, 24 cattle from six farms were positive for BVDV antigen, showing the farm-level or cattle-level prevalence of 35.3% or 1.6%, respectively. By the second ELISA testing which carried out with the first ELISA-positive samples after three-weeks, 12 cattle (0.8%) from five farms (29.4%) were positive for BVDV antigen, indicating these cattle were PI cattle. Genotypes of BVDV were determined with 12 BVDV-positive samples using a previously described RT-PCR assay and the results showed that 3 (25.0%) and 9 (75.0%) were confirmed to be type 1 and type 2, respectively. These results will be helpful to establish the effective control strategy for BVDV in cattle farms in Jeonbuk State.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.10
• /
• pp.905-911
• /
• 2014

A Loss-in-Weight (LIW) feeder, a type of automated measuring device, is a continuous feeder used in many mass production industries. Due to its versatility, there have been constant demands of LIW feeders in food production supply lines as well as chemical and pharmaceutical industries. In this paper, the process of designing a LIW feeder system with better performance will be examined and compared with commercial products. This system is characterized by low pass Butterworth filter and feed forward PI control. The filter is for noise disposal caused by dynamic condition of a LIW feeder. The feed forward PI control, based on linearity feature of feeders, is adequate for stable driving of the system. At the end, a possible evaluation method of LIW system will be proposed to verify the specific achievement of this paper.