• 제목/요약/키워드: ${\pi}$ current density

검색결과 35건 처리시간 0.024초

폴리이미드 박막의 공간전하현상에 관한 연구 동향 (A Research Trend on High Density Polyethylene Electrical Strength)

  • 최근호;오창근;신현만;황종선;최용성;이경섭
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1984-1985
    • /
    • 2007
  • Polyimide is widely used as a high-temperature insulating material. Space charge distributions in polyimide (PI) films strongly depend upon electric field, temperature, water content and so on. We observed space charge distributions in PI films with various water contents. When a dc field was applied to as-received PI films or water-treated PI films, positive and negative homo space charges were observed near the respective electrodes at 333 K. In dried PI films, the homo space charges were much reduced, and positive and negative hetero space charges in the bulk were clearly observed. The space charge amounts in water-treated PI films were smaller than in as-received ones, while the current density in water-treated PI film was larger than that in as-received one by two or more orders of magnitude. These suggest not only that the charge injection from the electrode is enhanced by absorbed water but also that absorbed water makes carriers mobile. The decay of space charge was also faster in water-treated PI than in as-received or dried one. This also supports the enhancement of apparent mobilities of carriers in PI by absorbed water.

  • PDF

구리 박막의 표면형상과 물성에 대한 전류밀도 영향 (Property and Surface Morphology of Copper Foil on the Current Density)

  • 우태규;박일송;정광희;설경원
    • 한국재료학회지
    • /
    • 제20권10호
    • /
    • pp.555-558
    • /
    • 2010
  • This study examined the effect of current density on the surface morphology and physical properties of copper plated on a polyimide (PI) film. The morphology, crystal structure, and electric characteristics of the electrodeposited copper foil were examined by scanning electron microscopy, X-ray diffraction, and a four-point probe, respectively. The surface roughness, crystal growth orientation and resistivity was controlled using current density. Large particles were observed on the surface of the copper layer electroplated onto a current density of 25 mA/$cm^2$. However, a uniform surface and lower resistivity were obtained with a current density of 10 mA/$cm^2$. One of the important properties of FCCL is the flexibility of the copper foil. High flexibility of FCCL was obtained at a low current density rather than a high current density. Moreover, a reasonable current density is 20 mA/$cm^2$ considering the productivity and mechanical properties of copper foil.

변위전류법에 의한 지질 단분자막의 $\pi$-A특성 ($\pi$-A properties of phospholipid monolayers by Maxwell-displacement-current-measuring technique)

  • 이경섭;전동규;권영수;국상훈
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1995년도 춘계학술대회 논문집
    • /
    • pp.120-123
    • /
    • 1995
  • Maxwell-Displacement-Currnt-Measuring Technique(MDCM) is a simple system for displacement current measuring which consist with two electrodes to the electrometer, With this method, the displacement current flow only when the electric flux density change by the displacement of molecules or charge particles of membrance on the water surface. Thus, It is Possible to detect dynamic behavior of molecules of membrane without any electrical contact with molecule membrane. In this paper, We measure surface pressure, displacement current and dipole moment of phospholipid monolayers on the wafer surface with applied pressure by MDCM and We measured DTA(differential thermal analysis).

  • PDF

폴리이미드 박막의 공간전하현상 및 수분의 영향 (Space Charge Phenomena in Polyimide Films and Effects of Absorbed Water)

  • 윤주호;최용성;황종선;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
    • /
    • pp.82-85
    • /
    • 2008
  • Polyimide is widely used as a high-temperature insulating material. Space charge distributions in polyimide (PI) films strongly depend upon electric field, temperature, water content and so on. We observed space charge distributions in PI films with various water contents. When a dc field was applied to as-received PI films or water-treated PI films, positive and negative homo space charges were observed near the respective electrodes at 333 K. In dried PI films, the homo space charges were much reduced, and positive and negative hetero space charges in the bulk were clearly observed. The space charge amounts in water-treated PI films were smaller than in as-received ones, while the current density in water-treated PI film was larger than that in as-received one by two or more orders of magnitude. These suggest not only that the charge injection from the electrode is enhanced by absorbed water but also that absorbed water makes carriers mobile. The decay of space charge was also faster in water-treated PI than in as-received or dried one. This also supports the enhancement of apparent mobilities of carriers in PI by absorbed water.

  • PDF

폴리이미드 박막의 공간전하현상 (Space Charge Phenomena in Polyimide Films)

  • 윤주호;최용성;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.311-312
    • /
    • 2007
  • Polyimide is widely used as a high-temperature insulating material. Space charge distributions in polyimide (PI) films strongly depend upon electric field, temperature, water content and so on. We observed space charge distributions in PI films with various water contents. When a dc field was applied to as-received PI films or water-treated PI films, positive and negative homo space charges were observed near the respective electrodes at 333 K. In dried PI films, the homo space charges were much reduced, and positive and negative hetero space charges in the bulk were clearly observed. The space charge amounts in water-treated PI films were smaller than in as-received ones, while the current density in water-treated PI film was larger than that in as-received one by two or more orders of magnitude. These suggest not only that the charge injection from the electrode is enhanced by absorbed water but also that absorbed water makes carriers mobile. The decay of space charge was also faster in water-treated PI than in as-received or dried one. This also supports the enhancement of apparent mobilities of carriers in PI by absorbed water.

  • PDF

Contribution of LC material and PI trapping effect to ionic contamination in STN-LCD cells

  • Chen, Rong;Gu, Xi;Gong, X.Y.;Mok, W.K.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.361-363
    • /
    • 2005
  • The transient current of STN-LCD cells was measured and simulated to characterize ionic behavior in LCD cells. An experiment was performed to investigate the contribution of LC material and PI trapping effect to mobile ions in the LC layer. We observed that most of ions are trapped on the PI surface rather than stay in the LC layer in case of normal STN-LCD, and PI surface favors larger ions in general. A linear correlation of ion density and $V_50$ shift of the Transmission-Voltage (TV) curve between 30Hz and 1kHz at typical ion mobility was found.

  • PDF

Fuzzy 제어기를 이용한 7상 BLDC 전동기 속도제어 구동시스템 (Driving System of 7-Phase BLDC Motor Speed Control by Fuzzy Controller)

  • 윤용호
    • 전기학회논문지
    • /
    • 제66권11호
    • /
    • pp.1663-1668
    • /
    • 2017
  • A BLDC motor with higher number of phases has several advantages, compared to the conventional three-phase BLDC motors. It can reduce the commutation torque ripple and the iron loss without increasing the voltage per phase and increase the reliability and power density. Higher number of phases increase the torque-per-ampere ratio for the same machine volume and output power by widening the electrical conduction period. In this paper, the proposed seven-phase BLDC motor drive system is made into several functional modular blocks, so that it can be easily extended to other ac motor applications: back-EMF block, hysteresis current control block, pwm inverter block, phase current block, and speed/torque control block. Also in a system of BLDC motor drive, the PI controller has been widely used in the speed controller because of the simple implementation. To obtain a good speed response in a general drive system using the PI controller, the high bandwidth of a controller is established. therefore, in this paper, a Fuzzy controller is applied to the 7-phase BLDC motor drive system in order to improve the speed control performance. The Fuzzy controller is compared with a conventional PI controller through the experiment with respect to speed dynamic responses. These experimental results show that the Fuzzy controller of the 7-phase BLDC motor drive system is superior over the conventional PI controller. The algorithm using the Fuzzy controller can improve a comfortable ride in the field of high performance 7-phase BLDC motor drive applications.

BISTROs and Varying Magnetic Fields with Density in Serpens Main

  • 권우진
    • 천문학회보
    • /
    • 제45권1호
    • /
    • pp.57.4-58
    • /
    • 2020
  • The B-fields in Star-forming Region Observations (BISTRO) is a large program of the James Clerk Maxwell Telescope (JCMT) to study the roles of magnetic fields in molecular clouds on intermediate scales (a few thousands au or larger scales), in which a large number of researchers over the world are involved. This project was initiated in 2016 with polarimetric observations of nearby star-forming regions and has been extended toward massive and farther regions (BISTRO-2) and various evolutionary stages and environmental conditions (BISTRO-3). The current status of the BISTRO projects is reported. In addition, we discuss magnetic fields in the Serpens Main molecular cloud, which is one of the BISTRO star-forming regions. Utilizing the Histogram of Relative Orientations method, which compares polarization directions with density gradients, we show that magnetic fields are parallel to filaments in less dense filamentary structures but perpendicular to dense ones. Furthermore, the magnetic field directions with respect to density gradients vary again with density in denser core regions, which is understood by core formation and pinched fields. Note: (PI) D. Ward-Thompson, (co-PIs) P. Bastien, T. Hasegawa, W. Kwon, S. Lai, and K. Qiu

  • PDF

Theoretical Analysis on Molecular Magnetic Properties of N-Confused Porphyrins and Its Derivatives

  • Wei, Wei;Bai, Fu-Quan;Xia, Bao-Hui;Zhang, Hong-Xing
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권9호
    • /
    • pp.2937-2942
    • /
    • 2012
  • We have theoretically investigated the magnetic properties of N-confused porphyrin (NCP), tetraphenyl-N-confused porphyrin (TPNCP) and their substituted derivatives with O, S and Se heteroatoms (2ONCP, 2STPNCP, 2SeNCP, 2OTPNCP, etc.) by using DFT method. In the minimum energy structures of the 2OTPNCP, the two couples opposite phenyl substitutes are staggered. In the case of TPNCP, 2STPNCP and 2SeTPNCP, two phenyls being respectively close to or opposite to N-confused pyrrole are found to be pointed the same direction, whilst others are in the opposite direction. Based on the equilibrium structures, the $^1H$ chemical shifts and nucleus-independent chemical shifts (NICS) are calculated in this paper. The ${\pi}$ current density being induced by the tridimensional perpendicular magnetic field transmits the inner section of the pyrrole segments for NCP and TPNCP. As for their substituted derivatives with O, S and Se atoms, the current path passes through the outer section of the two heterorings. The NICS values at the ring critical points of the heterorings are much lower (in absolute value) than those of which is at the center of an isolated pyrrole molecule. The $^1H$ NMR for ${\beta}H$ atoms of the heterorings decreases from O, S to with Se.

오이 시설재배시 고구마뿌리혹선충의 경제적피해한계 (Economic Threshold of Meloidogyne incognita for Greenhouse Grown Cucumber in Korea)

  • 김동근;이중환
    • 식물병연구
    • /
    • 제14권2호
    • /
    • pp.117-121
    • /
    • 2008
  • 고구마 뿌리혹선충(Meloidogyne incognita)의 시설재배 오이에 대한 경제적 피해한계를 조사하기 위하여 비닐하우스 내에 합판으로 만든 박스($30{\times}40{\times}15cm$)를 묻고 박스 내 토양 $100cm^3$당 뿌리혹선충 유충의 밀도를 0, 10, 30, 100, 300, 600마리로 조정된 토양을 넣었다. 각 박스에는 '장수신토좌'에 접붙인 '슈퍼만촌'오이 23일 묘를 8월 1일 1포기씩 심고 11월까지 각 구당 오이 수확량을 조사하였다. 뿌리혹선충의 유충밀도와 수량과의 회귀식은 $Y=0.82-0.04{\cdot}Log_{10}$(Pi+1)로 방제 비용을 감안한 경제적 피해 허용 수준은 정식전 뿌리혹선충 유충의 밀도가 토양 $1,000cm^3$당 5마리이면 살선충제 입제 살포가 경제적이고, 유충의 밀도가 토양 $1,000cm^3$당 25마리 이상이면 훈증제를 처리하는 것도 고려해 볼 수 있다. 오이 시설재배시 뿌리혹선충의 피해를 방지하기 위해서는 최소한 정식 수개월 전에 미리 토양 선충 밀도를 조사해야 할 것이다.