• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.462-466
• /
• 2010

The purpose of this study is to evaluate the safety of a wire connector fabricated for the effective installation of a lighting fixture including its contact resistance, insulation resistance, withstanding voltage characteristics, etc., and to provide the basis for the analysis and judgment of PL(Product Liability) dispute by presenting a damage pattern due to a general flame and overcurrent. This study applied the Korean Standard (KS) for the incombustibility test of the connector using a general flame and performed an overcurrent characteristics test of the connector using PCITS (Primary Current Injection Test System). The contact resistance of the housing connector was measured using a high resistance meter and the insulation resistance was measured using a multimeter. In addition, a supply voltage of AC 1,500V for testing the withstanding voltage characteristics was applied to both ends of the connector. Measurement was performed on 5 specimens and the measured values were used as a basis for judgment. Since the connector is fabricated in the form of a housing, it can be connected and separated easily and has a structure that allows no foreign material to enter. In addition, since it has a structure that allows wires to be connected only when their polarity is identical, any misconnection that may occur during installation can be prevented. When the incombustibility test was performed by applying a general flame to the connector, it showed outstanding incombustibility characteristics and the blade and blade holder connected to the housing remained firmly secured even after the insulation sheath (PVC) was completely destroyed by fire. In addition, the mechanism of the damaged connecting wire showed a comparatively uniform carbonization pattern and it was found that some residual melted insulation material was attached to both ends. In the accelerated life test (ALT) to which approximately 500% of the rated current was applied, the connector damage proceeded in the order of white smoke generation, wire separation, spark occurrence and carbonization. That is, it could be seen that the connector damaged by overcurrent lost its own metallic color with traces of discoloration and carbonization. The contact resistance of the connector at a normal state was 2.164mV/A on average. The contact resistance measured after the high temperature test was 3.258mV/A. In addition, the insulation resistance after the temperature test was completed was greater than $10G\Omega$ and the withstanding voltage test result showed that no insulation breakdown occurred to all specimens showing stable withstanding voltage and insulation resistance characteristics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.130.2-130.2
• /
• 2013

Today, chemical vapor deposition (CVD) of hydrocarbon gases has been demonstrated as an attractive method to synthesize large-area graphene layers. However, special care should be taken to precisely control the resulting graphene layers in CVD due to its sensitivity to various process parameters. Therefore, a facile synthesis to grow graphene layers with high controllability will have great advantages for scalable practical applications. In order to simplify and create efficiency in graphene synthesis, the graphene growth by thermal annealing process has been discussed by several groups. However, the study on growth mechanism and the detailed structural and optoelectronic properties in the resulting graphene films have not been reported yet, which will be of particular interest to explore for the practical application of graphene. In this study, we report the growth of few-layer, large-area graphene films using rapid thermal annealing (RTA) without the use of intentional carbon-containing precursor. The instability of nickel films in air facilitates the spontaneous formation of ultrathin (<2~3 nm) carbon- and oxygen-containing compounds on a nickel surface and high-temperature annealing of the nickel samples results in the formation of few-layer graphene films with high crystallinity. From annealing temperature and ambient studies during RTA, it was found that the evaporation of oxygen atoms from the surface is the dominant factor affecting the formation of graphene films. The thickness of the graphene layers is strongly dependent on the RTA temperature and time and the resulting films have a limited thickness less than 2 nm even for an extended RTA time. The transferred films have a low sheet resistance of ~380 ${\Omega}/sq$, with ~93% optical transparency. This simple and potentially inexpensive method of synthesizing novel 2-dimensional carbon films offers a wide choice of graphene films for various potential applications.

• Korean Journal of Materials Research
• /
• v.19 no.1
• /
• pp.28-32
• /
• 2009

Silicon carbide (SiC) is a promising material for power device applications due to its wide band gap (3.26 eV for 4H-SiC), high critical electric field and excellent thermal conductivity. The Schottky barrier diode is the representative high-power device that is currently available commercially. A field plate edge-terminated 4H-SiC was fabricated using a lift-off process for opening the Schottky contacts. In this case, Ni/Ti dual-metal contacts were unintentionally formed at the edge of the Schottky contacts and resulted in the degradation of the electrical properties of the diodes. The breakdown voltage and Schottky barrier height (SBH, ${\Phi}_B$) was 107 V and 0.67 eV, respectively. To form homogeneous single-metal Ni/4H-SiC Schottky contacts, a deposition and etching method was employed, and the electrical properties of the diodes were improved. The modified SBDs showed enhanced electrical properties, as witnessed by a breakdown voltage of 635 V, a Schottky barrier height of ${\Phi}_B$=1.48 eV, an ideality factor of n=1.04 (close to one), a forward voltage drop of $V_F$=1.6 V, a specific on resistance of $R_{on}=2.1m{\Omega}-cm^2$ and a power loss of $P_L=79.6Wcm^{-2}$.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.86-91
• /
• 2005

We present the results of electrical resistivity surveys carried out to estimate the seasonal variation of the water table level in a large-scale landslide area of Tertiary geology in Japan. One long profile, trending NE-SW, was established perpendicular to the main regional geology of the region. Three boreholes are located very close to the profile. The profile was surveyed twice, once before snowfall and once after snow had melted. The relationship between resistivity and water saturation of pyroclastic materials was clarified through laboratory tests. We did this in order to estimate the water content of the pyroclastic layer from the observed resistivity distribution in the landslide area. The resistivity of the saturated pyroclastic deposit calculated using an empirical formula was found to be $570{\Omega}.m$. Based on this computed resistivity, the groundwater level was deduced by assuming that the pyroclastic deposits were fully saturated beneath the water table. We show that the estimated water table before snowfall is lower than that inferred after snow has melted, by about 1.1 to 4.7 m. This suggests that the water table in the upper part of the pyroclastic layer in the landslide area fluctuates greatly, compared to the lower part. This seasonal groundwater fluctuation is possibly caused by the infiltration of water into the subsurface after snowmelt.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.33 no.4
• /
• pp.198-206
• /
• 2019

This study was conducted to evaluate the vasorelaxant effect of DangGuiSu-San and SamHwangSaSim-Tang extract on contracted rabbit carotid artery. To study the effect of DangGuiSu-San and SamHwangSaSim-Tang extract on contracted rabbit carotid arterial strips, arterial strips with intact or damaged endothelium were used for experiment using organ bath. The pre-contracted arterial strips with Phenylephrine(PE) was treated with various concentrations of DangGuiSu-San and SamHwangSaSim-Tang extract(0.01, 0.03, 0.1, 0.3 and $1.0mg/m{\ell}$). To determine the mechanisms of DangGuiSu-San and SamHwangSaSim-Tang-induced vasorelaxant, DangGuiSu-San and SamHwangSaSim-Tang extract were infused into contracted arterial rings which had been pretreated by indomethacin(IM), tetraethylammonium chloride(TEA), $N{\omega}$-nitro-L-arginine ($_L-NNA$), methylene blue(MB). And calcium chloride(Ca) 1 mM was infused into precontracted arterial ring induced by PE after treatment of DangGuiSu-San and SamHwangSaSim-Tang extract in $Ca^{2+}$-free krebs solution. DangGuiSu-San and SamHwangSaSim-Tang extract revealed significant relaxation on PE-induced arterial contraction. DangGuiSu-San and SamHwangSaSim-Tang extract also had an effective relaxation to the intact endothelium arterial ring. SamHwangSaSim-Tang extract on contracted rabbit carotid artery is related with NO-cGMP pathway. Pretreatment of DangGuiSu-San and SamHwangSaSim-Tang extract inhibited the contraction by influx of extracellular $Ca^{2+}$ in contracted arterial ring induced by NE. This study indicated that the relaxation effect of SamHwangSaSim-Tang extract on contracted rabbit carotid artery is related with NO-cGMP pathway. Pretreatment of DangGuiSu-San and SamHwangSaSim-Tang extract inhibited the contraction by influx of extracellular $Ca^{2+}$ in contracted arterial ring induced by NE.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.35 no.4
• /
• pp.75-94
• /
• 2022

Objectives : To identify the active ingredient of Poncirus Trifoliata Immaturus and to explore the mechanism expected to potentially act on dermatitis accompanied by pruritus. Methods : We conducted the network pharmacological analysis. We selected effective ingredients among the active compounds of Poinciri Fructus Immaturus. We found the target protein of the selected active ingredient, disease(dermatitis accompanied by pruritus) and fexofenadine. Then we established the network between the proteins which Poinciri Fructus Immaturus and fexofenadine intersected with disease respectively, and the coregene was also extracted. After that, the active pathways in the human body involving the groups and coregenes were searched. Results : Total of 7 active ingredients were selected, and 202 target proteins were collected. There were 756 proteins related to inflammatory skin disease accompanied by pruritus, and 75 proteins were related to fexofenadine. 42 proteins crossed by Poinciri Fructus Immaturus with a disease, and 31 proteins crossed by fexofenadine with a disease. 12 proteins were found as a coregene from the proteins that cross Poinciri Fructus Immaturus and disease. Coregenes are involved in 'Nitric-oxide synthase regulator activity', 'Epidermal growth factor receptor signaling pathway'. 2 groups that extracted are invloved in 'Fc receptor signaling pathway', 'Central carbon metabolism in cancer', 'Phosphatidylinositol 3-kinase complex, class IB', and 'omega-hydroxylase P450 pathway'. Conclusion : It is expected that Poinciri Fructus Immaturus will be able to show direct or indirect anti-pruritus and anti-inflammatory effects on skin inflammation accompanied by pruritus in the future. And it is also expected to have a synergy effect with fexofenadine on skin disease.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.6
• /
• pp.1348-1359
• /
• 2013

Kwamaegi is made from the flesh of Pacific saury, Cololabis Saira, which is traditional Korean seafood. It is well-recognized as a valuable health food containing EPA(eicosapentaenoic acid) and DHA(docosahexaenoic acid) to be known ${\omega}$-3 fatty acid. This study was conducted to obtain basic data which can be applied to process of canned Kwamaegi using tomato paste sauce. Commercial Kwamaegi was cut into $2{\times}3cm$ lengths, filled 90 g into can (301-3), added with 60 g water and then precooked for 10 min. at $100^{\circ}C$. After precooking, water was drained. The precooked Kwamaegi was packed into the can, and added with 60 g of tomato paste sauce(tomato paste 42%, gum guar 1.0%, salt 2.0%, starch syrup 2.0%, cooking wine 1%, water 52%). The cans were seamed using a vacuum seamer, and then sterilized for various Fo values (Fo 8~12 min.) in a steam system retort at $121^{\circ}C$. pH, VBN, amino-N, total amino acid, free amino acid, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable bacterial count of the canned Kwamaegi using tomato paste sauce produced at various sterilization condition(Fo 8~12 min.) were measured. There was no remarkable difference between sterilization conditions and sensual characteristics. The results showed that the product sterilized at Fo 8 min. was the most desirable because this condition is the most economical and tasty.

• Korean Journal of Food Science and Technology
• /
• v.18 no.1
• /
• pp.42-47
• /
• 1986

The fatty acid composition of lipids extracted from 18 kinds of salted and fermented sea foods which have been consumed in Korea were examined. The lipid contents of salted and fermented sea foods showed wide difference (0.8-11.9%) depending on species and portions of raw materials. In fatty acid composition of salted and fermented sea foods prepared with whole fishes, the saturated fatty acid was the most predominant component, and the major fatty acids were 16:0, 18:1, 22:6, 16:1 and 20:5. In case of salted and fermented products prepared with gills, roe or intestines, the polyenoic fatty acid was the main component, the major fatty acids were 18:1, 16:0, 22:6, 20:5, 16:1 and 18:3. In these products the composition ratios of 20:5 and 18:3 were higher, and that of 16:0 and 16:1 were slightly lower as compared with salted and fermented whole fish products. And in case of salted and fermented crustacea and mollusk, the polyenoic fatty acids such a 22:6 and 20:5 were the most predominant component, the abundant fatty acids were 22:6, 16:0, 20:5, 18:1 and 16:1. Judging from results, salted and fermented sea foods were abundant of the highly unsaturated fatty acids such as 20:5, 22:6 inspite of the long fermentation periods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.226-226
• /
• 2008

지난 10여년 동안 Sn-3.0Ag-0.5(wt%)Cu 합금은 대표 무연솔더 조성으로 다양한 전자제품의 실장 및 접합에 적용되어 왔으며, 그 신뢰성 역시 충분히 검증된 바 있다. 그러나 최근 Ag 가격의 급격한 상승과 솔더 접합부의 내 충격 신뢰성을 보다 향상시키고자 하는 업계의 동향은 Ag의 함량이 낮은 무연솔더 조성의 적용 확대를 유도하고 있다. 이에 따라 본 연구자들은 저 Ag 함유 무연슬더로 Sn-1.2Ag-0.5Cu-0.4In 조성을 제안한 바 있는데, 이는 Sn-3.0Ag-0.5Cu 조성 이상의 solderability를 가지면서도 그 금속원료 가격이 약 20% 가량 저렴한 특징을 가진다. 또한 열 싸이클링 (cycling) 테스트를 통한 슬더 조인트의 신뢰성을 평가한 결과, Sn-3.0Ag-0.5Cu에 크게 뒤떨어지지 않는 양호한 특성이 관찰되었다. 따라서 본 연구에서는 열 싸이클링 테스트와 더불어 최근 그 중요성이 지속적으로 커지고 있는 내 충격 신뢰성 평가 시험을 실시하여 개발된 4원계 무연솔더 조성의 기계적 특성을 기존 무연솔더 조성과 비교, 분석해 보았다. 각 솔더 조성은 솔더 볼 형태로 제조되어 CSP(Chip Scale Package) 상에 범핑 (bumping)되었으며, CSP를 PCB(Printed Circuit Board) 상에 실장하는 공정에서도 Sn-3.0Ag-0.5Cu 및 Sn-1.2Ag-0.5Cu-0.4In의 두 종류의 솔더 페이스트가 사용되었다. 본 연구에서의 내 충격 신뢰성 시험에는 자체 제작한 rod drop 시험기를 사용하였는데, 고정된 CSP 실장 board의 후면 부위를 일정한 높이에서 추를 반복적으로 자유 낙하시켜 급격한 충격을 주는 방식으로 실험을 실시하였다. 이 때 추의 무게는 30g, 낙하 높이는 10cm 였으며, 추의 낙하 시 측정된 board 의 휨 변위량은 약 0.7mm로 측정되었다. 사용된 CSP와 PCB 는 모두 daisy chain 방식으로 연결되어 있기 때문에 저항측정기를 사용한 간단한 실시간 저항 측정 방법으로 시험 이력에 따른 파단부의 발생 시점과 대략의 위치를 손쉽게 확인할 수 있었다. 솔더 조인트의 파단 기준 저항값으로 $1000\Omega$을 설정하였으며. 각 조건 당 5 개 이상의 샘플에 대해 평가를 실시한 후 그 평균값을 조사하였다. 시험 결과 제안된 Sn-1.2Ag-0.5Cu-0.4In 조성은 대표적인 저 Ag 함유 조성인 Sn-1.0Ag-0.5Cu에 비해서는 떨어지는 내 충격 신뢰성을 나타내었지만, 우수한 연성에 기인하여 Sn-3.0Ag-0.5Cu 조성에 비해서는 약 2 배 이상 우수한 신뢰성이 관찰되었다. 또한 CSP의 실장 시 Sn-3.0Ag-0.5Cu보다 Sn-1.2Ag-0.5Cu-0.4In 조성 솔더 페이스트를 적용한 경우에서 보다 우수한 내 충격 신뢰성을 나타내어 기본적으로 개발된 Sn-1.2Ag-0.5Cu-0.4In 솔더 페이스트가 Sn-3.0Ag-0.5Cu 조성의 기존 솔더 페이스트 보다 내 충격 신뢰성이 우수함을 검증할 수 있었다. 각 조성의 솔더 조인트를 $150^{\circ}C$ 에서 500시간 aging한 후 실시한 내 충격 신뢰성 평가에서는 모든 조성에서 그 신뢰성이 급감하는 경항을 나타내었으나, Sn-1.2Ag-0.5Cu-0.4In가 Sn-l.0Ag-0.5Cu보다도 그 상대적인 신뢰성이 우수한 것으로 관찰되었다. 이와 같이 aging 후 실시하는 충격시험은 가장 실제적인 상황과 유사한 조건이므로 상기의 실험 결과는 매우 고무적이었으며, 이에 대한 보다 면밀한 분석이 요청되었다. 마지막으로 파면 및 미세조직 관찰을 통하여 각 조성에서의 충격 파단 특성을 비교, 분석해 보았다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.2
• /
• pp.124-130
• /
• 2016

In this study, agronomic characteristics and fatty acid composition of 121 flax (Linum usitatissimum L.) germplasms were analyzed. The flax germplasms had a fairly short growth period of 75-95 days. The plant height at maturity varied from 52 to 124 cm. The flower color varied from white to lilac and even purple. Early flowering flax germplasms had white flowers and were resistant to lodging. In early flowering flax germplasms, all agronomic characteristics, including growth period, plant height, branch number per plant, stem diameter, number of capsules per raceme, seed number per capsule, 1000-seed weight, and seed yield, were decreased. The average fatty acid composition of 121 flax germplasms comprised palmitic acid (5.3%), stearic acid (4.3%), oleic acid (29.7%), linoleic acid (13.1%) and linolenic acid (46.4%). The total content of unsaturated fatty acids ranged from 84~94% with an average of 88%. Among the fatty acids, linolenic acid (omega-3) content was the highest with a range of 36~54%. In five selected flax germplasms (Hollandia 1803, Red son, C & F Res Br 1767, Wiera, and Ireland 1657) with high linolenic acid (${\geq}51%$), total lipid and protein contents were 30~36% and 5.4~6.9%, respectively. Overall, flax can practically be adoptable into cropping systems in South Korea and utilized as a scenery crop, since flax has a short cultivation period with diverse flower colors.