• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.335-335
• /
• 2007

본 연구에서는 RF Magnetron Sputtering 법으로 94:6 wt%의 비율로 Sb가 첨가된 $SnO_2$ 타겟을 사용하여 실온에서 ATO(Antimony doped Tin Oxide) 박막을 증착하고, 열처리가 ATO 박막의 구조적, 전기적, 광학적 특성에 미치는 효과를 연구하고자 하였다. ATO 박막의 두께는 약 200 nm로 증착하였으며, 실험 조건으로는 Ar 유량을 100 seem, 진공도는 1, 5, 10 mTorr로 변화시켰으며 스퍼터링 파워는 100, 150, 200, 250 W로 조절하였다. 증착되어진 박막은 vacuum 상태에서 300, $600^{\circ}C$의 온도에서 열처리를 수행하였으며 결과적으로 스퍼터링 파워가 증가함에 따라 비저항이 감소하였고, 250 W의 파워와 10 mTorr의 공정압력 조건에서 $600^{\circ}C$로 열처리한 ATO 박막은 $5{\times}10^{-3}{\Omega}-cm$의 저항률과 85.3%의 높은 투과도를 가지는 우수한 투명 전도막을 얻을 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.594-599
• /
• 2007

[ $CulnS_2$ ] thin films were synthesized by sulfurization of Cu/In Stacked elemental layer deposited onto glass Substrates by vacuum furnace annealing at temperature $200^{\circ}C$. And structural and electrical properties were measured in order to certify optimum conditions for growth of the ternary compound semiconductor $CuInS_2$ thin films with non-stoichiometry composition. $CuInS_2$ thin film was well made at the annealed $200^{\circ}C$ of SLG/Cu/In/S stacked elemental layer which was prepared by thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1 : 1 : 2. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM and Hall measurement system. The compositional deviations from the ideal chemical formula for $200^{\circ}C$ material can be conveniently described by non-molecularity$({\Delta}x=[Cu/In]-1)$ and non-stoichiometry $({\Delta}y=[{2S/(Cu+3In)}-1])$. The variation of ${\Delta}x$ would lead to the formation of equal number of donor and accepters and the films would behave like a compensated material. The ${\Delta}y$ parameter is related to the electronic defects and would determine the type of the majority charge carriers. Films with ${\Delta}y>0$ would behave as p-type material while ${\Delta}y<0$ would show n-type conductivity. At the sane time, carrier concentration, hall mobility and resistivity of the thin films was $9.10568{\times}10^{17}cm^{-3},\;312.502cm^2/V{\cdot}s\;and\;2.36{\times}10^{-2}\;{\Omega}{\cdot}cm$, respectively.

• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.814-820
• /
• 2009

Antimony (Sb) doped ZnO thin films (0.1 at.%) were deposited on sapphire (0001) substrates at various temperatures (200 - 600$^{\circ}C$) by using pulsed laser deposition technique. All the thin films have been characterized by X-ray diffractometer, atomic force microscopy and spectrophotometer to investigate their structural, morphological and optical properties, respectively. Hall measurements were also carried out to identify the electrical properties of the thin films. These thin films were constituted in wurtzite structure with the preferential orientation of (002) diffraction plane and had as high as 80% optical transmission in the visible range. The bandgap energy also was determined by spectrophotometer which was around 3.28 eV. Hall measurements results revealed that the Sb dope ZnO thin film (0.1 at.%) grown at $500^{\circ}C$ exhibited p-type conduction with a carrier concentration of $8.633\times10^{16}\;cm^{-3}$, a mobility of $1.41\;cm^2/V{\cdot}s$ and a resistivity of $51.8\;\Omega{\cdot}cm$. We have successfully achieved p-type conduction in antimony doped ZnO thin films with low doping level even though the electrical properties are not favorable. This paper suggests the feasibility of p-type doping with large-size-mismatched dopant by using pulsed laser deposition.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.171-171
• /
• 2010

GaN 기반 Light emitting diodes(LEDs)의 p-type doping layer는 일반적으로 hole을 발생시키는 acceptor로 Mg이 사용하되고 있다. 보통 Mg이 도핑된 p-type GaN은 >$1\;{\Omega}{\cdot}cm$의 저항이 존재하는데 그 이유는 Mg의 열적 이온화를 위한 activation 에너지가 높아서 상온에서 valence band의 hole concentration는 전체 억셉터 농도의 1%가 되지 않기 ��문이다. 본 논문에서는 높은 hole 농도를 얻기 위해서 metalorganic chemical-vapor deposition (MOCVD)를 장비를 사용하여 사파이어 기판의 misorientation-angle에 따른 p-type a-plane(11-20) GaN 특성을 분석하였다. misorientation-angle은 c축 방향으로 $+0.15^{\circ}$, $-0.15^{\circ}$, $-0.2^{\circ}$, $-0.4^{\circ}$ off된 r-plane(1-102) 사파이어 기판 을 사용하였다. p-type 도핑물질로 bis-magnesium (Cp2Mg) 소스를 사용하였고 성장 과정중 발생하는 hydrogen passivation으로 인한 Mg-H complexes현상을 해결하기위해 conventional furnace annealing (CFA)와 rapid thermal annealing (RTA)를 이용하여 열처리 공정을 진행하였다. 열처리 공정은 Air와 N2 분위기에서 $650^{\circ}C$에서 $900^{\circ}C$ 사이의 다양한 온도에서 수행하였고 Hall 측정을 위해 Ni을 전극 물질로 사용하였다. 상온에서 Accent HL5500IU Hall system을 사용하여 hole concentration, mobility, specific resistance을 측정하였다. 열처리 공정 후 Hall측정 결과 $+0.15^{\circ}$, $-0.15^{\circ}$, $-0.2^{\circ}$, $-0.4^{\circ}$ off된 각 샘플들은 온도, 시간, 분위기에 따라 hole concentration ($7.4{\times}10^{16}cm^{-3}{\sim}6{\times}10^{17}cm^{-3}$), mobility(${\mu}h=\;1.72\;cm^2/V-s\;{\sim}15.2\;cm^2/V-s$), specific resistance(4.971 ohm-cm ~8.924 ohm-cm) 가 변화됨을 확인 할 수 있었다. 또한 광학적 특성을 분석하기 위해 Photoluminescence (PL)을 측정하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.126-126
• /
• 2010

본 연구에서는 catalyst-free 유기금속 화학증착법 (MOCVD)를 이용하여 사파이어 (0001)면 위에 직접 InN nanorods를 성장하였다. InN 박막의 성장에서 TMIn과 $NH_3$를 전구체로 사용하였으며, 캐리어 가스로는 질소를 사용하였다. 성장 전, 기판에 $1100^{\circ}C$에서 3분간 nitridation 처리를 거친 후 온도를 낮춰 $630{\sim}730^{\circ}C$의 온도범위 에서 InN 박막을 성장하였다. 이때 $710^{\circ}C$의 온도에서 박막은 columnar growth의 특성을 보였으며 동일조건에서 80분간 성장시킨 결과 InN nanorods가 성장되었다. 성장시킨 InN nanorod는 X-선 회절 측정법, 주사 전자 현미경 그리고 투과 전자 현미경을 이용하여 그 특성을 분석하였다. 투과 전자 현미경을 통한 분석결과 지름이 150~200 nm이며 그 길이는 수 ${\mu}m$인 InN nanorod가 성공적으로 성장되었음을 확인하였다. 또한 X-선 회절 측정법과 주사 전자 현미경을 통한 분석에서 이들 nanorods가 대부분 c 방향으로 수직하게 정렬되어 있음을 확인하였다. 또한 Ti/Au (120/80 nm)를 전극으로 사용하여 개개의 nanorod의 전기적 특성을 분석한 결과 linear한 I-V특성이 관찰되었으며 비저항은 평균적으로 $0.0024\;{\Omega}cm$ 이었다. transfer 특성의 측정결과 -50V까지 게이트 전압을 인가하여도 드레인 전류의 변화는 매우 적어 doping level이 상당히 높다고 예상가능하다. 또한 mobility는 $133\;cm^2/Vs$로 도출되었다.

• 한국재료학회지
• /
• 제18권2호
• /
• pp.84-91
• /
• 2008

The effects of the deposition and annealing temperature on the structural, electrical and optical properties of Ag doped ZnO (ZnO : Ag) thin films were investigated. All of the films were deposited with a 2wt% $Ag_2O-doped$ ZnO target using an e-beam evaporator. The substrate temperature varied from room temperature (RT) to $250^{\circ}C$. An undoped ZnO thin film was also fabricated at $150^{\circ}C$ as a reference. The as-grown films were annealed in temperatures ranging from 350 to $650^{\circ}C$ for 5 h in air. The Ag content in the film decreased as the deposition and the post-annealing temperature increased due to the evaporation of the Ag in the film. During the annealing process, grain growth occurred, as confirmed from XRD and SEM results. The as-grown film deposited at RT showed n-type conduction; however, the films deposited at higher temperatures showed p-type conduction. The films fabricated at $150^{\circ}C$ revealed the highest hole concentration of $3.98{\times}1019\;cm^{-3}$ and a resistivity of $0.347\;{\Omega}{\cdot}cm$. The RT PL spectra of the as-grown ZnO : Ag films exhibited very weak emission intensity compared to undoped ZnO; moreover, the emission intensities became stronger as the annealing temperature increased with two main emission bands of near band-edge UV and defect-related green luminescence exhibited. The film deposited at $150^{\circ}C$ and annealed at $350^{\circ}C$ exhibited the lowest value of $I_{vis}/I_{uv}$ of 0.05.

• ALGAE
• /
• 제32권1호
• /
• pp.67-74
• /
• 2017

The heterotrophic dinoflagellate Oxyrrhis marina is known to produce high levels of docosahexaenoic acid (DHA) when fed on diverse algal prey. However, large-scale culturing of algal prey species is not easy and requires a large amount of budget, and thus more easily cultivable and low-cost prey is required. Dried yeast was selected as a strong candidate for an alternative prey in our preliminary tests. Thus, we explored the fatty acid composition and DHA production of O. marina fed on dried yeast and compared these results to those of O. marina fed on two algal prey species: the phototrophic dinoflagellate Amphidinium carterae and chlorophyte Chlorella sp. powder. O. marina fed on dried yeast, which does not contain DHA, produced the same high level of DHA as those fed on DHA-containing A. carterae. This indicates that O. marina is likely to produce DHA by itself regardless of prey items. Furthermore, the DHA content (and portion of total fatty acid methyl esters) of O. marina satiated with dried yeast, 52.40 pg per cell(and 25.9%), was considerably greater than that of O. marina fed on A. carterae (26.91 pg per cell; 15.7%) or powder of Chlorella sp. powder (21.24 pg per cell; 16.7%). The cost of dried yeast (approximately 10 US dollars for 1 kg dried yeast) was much lower than that of obtaining the algal prey (approximately 160 US dollars for 1 kg A. carterae). Therefore, compared to conventional algal prey, dried yeast is a more easily obtainable and lower-cost prey for use in the production of DHA by O. marina.

• Journal of Plant Biotechnology
• /
• 제37권4호
• /
• pp.472-482
• /
• 2010

For the massive screening of the genes related to oxidative stress, a cDNA library was constructed from hot pepper (Capsicum annuum L. cv. Nockkwang) leaves treated with methyl viologen. From this library, 1,589 cDNA clones were sequenced from their 5' ends. The sequences were clustered into 1,252 unigenes comprised of 152 contigs and 1,100 singletons. Similarity search against NCBI protein database identified 1,005 ESTs (80.3%) as Known, 197 ESTs (15.7%) as Unknown, and 50 ESTs (3.99%) as No hit. In the ESTs, oxidative stress-related genes such as ascorbate peroxidase, catalase, and osmotin precursor were highly expressed. The cDNA microarray containing 1,252 unigenes was constructed and used to analyze their expression upon methyl viologen treatment. Analyses of the hybridization revealed that various stress-related genes such as peroxidase, tyrosine aminotransferase, and omega-6 fatty acid desaturase, were induced and some metabolism related genes such as aldolase and ketol-acid reductoisomerase, were repressed by methyl viologen treatment, respectively. The information from this study will be used for further study on the functional roles of oxidative stress-related genes and signaling network of oxidative stress in hot pepper.

• 대한기계학회논문집B
• /
• 제30권3호
• /
• pp.278-286
• /
• 2006

Experiments were conducted to estimate the performance of drag force type vertical axis wind turbine with an opening-shutting rotor. It was operated by the difference in drag force generated on both sides of the blades. The rotational speed was measured by a tachometer in a wind tunnel and the tunnel wind speed was measured by using a pilot-static tube and a micro manometer. The performance test for a prototype was accomplished by calculating power, power coefficient, torque coefficient from the measurement of torque and rpm by a dynamometer controller. Various design parameters, such as the number of blades(B), blade aspect ratio(W/R), angle of blades$(\alpha)$ and drag coefficient acting on a blade, were considered for optimal conditions. At the experiment of miniature model, maximum efficiency was found at N=15, $\alpha=60^{\circ}$ and W/R=0.32. The measured test variables were power, torque, rotational speed, and wind speeds. The data presented are in the form of power and torque coefficients as a function of tip-speed ratio V/U. Maximum power was found in case of $\Omega=0.33$, when the power and torque coefficient were 0.14 and 0.37 respectively. Comparing model test with prototype test, similarity law by advance ratio for vertical axis wind turbine was confirmed.

• Journal of Ecology and Environment
• /
• 제43권1호
• /
• pp.31-42
• /
• 2019

Background: Han River estuary is a national wetland reserve near the Demilitarized Zone (DMZ) between South Korea and North Korea. This trans-boundary estuary area has been well preserved and shows distinctive plant communities along the salinity gradient. To elucidate energy flows and nutrient cycling in this area, we studied trophic relations between the dominant sesarmid crab, Sesarma dehaani, and food sources in three wetlands with different environments along the estuarine gradients. Results: Stable isotope signatures (${\delta}^{13}C$ and ${\delta}^{15}N$) of the crabs were significantly different among the sites and body size classes. Seasonal changes in ${\delta}^{13}C$ of small crabs were distinct from those of large individuals at all the sites. The isotopic values and fatty acid profiles of the crabs were more different among the sites in September than in May. In May, large-sized crabs utilized more plant materials compared to other dietary sources in contrast to small-sized crabs as revealed by a stable isotope mixing modeling, whereas contributions to diets of crabs were not dominated by a specific diet for different body size in September except at site 1. Based on PCA loadings, fatty acid content of $18:3{\omega}3$, known as a biomarker of plant materials, was the main factor to separate size groups of crabs in May and September. The ${\delta}^{13}C$ value of sediment had high correlation with those of small-sized crabs at site 1 and 2 when 1-month time lag was applied to the value for crabs during the surveyed period. Conclusions: Based on the stable isotope and fatty acid results, the consumption habits of S. dehaani appear to be distinguished by sites and their size. In particular, smaller size of S. dehaani appears to be more dependent on fewer food sources and is influenced more by the diet sources from the sediments in Han River estuary.