• 열처리공학회지
• /
• 제19권5호
• /
• pp.257-261
• /
• 2006

Scandium(Sc) in Al-Zn-Mg-Cu based Al alloy on precipitation phenomenon was compared to a 7001(Al-7.2%Zn-3.2%Mg-1.8%Cu) Al alloy. GP zone and ${\eta}^{\prime}$ phases were the main strengthening phases at low aging temperature under $100^{\circ}C$, but ${\eta}^{\prime}$ and $Al_3Sc$ phases were the main strengthening phases at high aging temperature above $1600^{\circ}C$ in Sc added 7000(Al-7.7%Zn-2.0%Mg-1.9%Cu-0.1%Zr) Al alloy. With the addition of 0.1%Sc in 7000 Al alloy, the activation energy for the GP zone, ${\eta}^{\prime}$ and ${\eta}$ phase decreased compared to the 7001 Al alloy. This result indicates that the Sc accelerated the precipitation for the GP zone, ${\eta}^{\prime}$ and ${\eta}$ phases in 7000 Al alloy. Al-7.7%Zn-2.0%Mg-1.9%Cu-0.1%Zr-0.1 Sc alloy has higher strength than 7001 Al alloy, which has high strength.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.635-636
• /
• 2006

In this study, the diffusion behaviors of C and Co in liquid phase sintering of WC-Co system were investigated whether these two components diffused in the same direction in case of having opposite gradient each other with not being $\eta$ phase. The green compacts with controlled compositions in not being of $\eta$ phase and gradient composition which one is WC-5Co-1.2%C, the other is WC-XCo-0.2%C (where X = 5, 10, 15, 20, 25) were sintered at $1350^{\circ}C$ and $1400^{\circ}C$ and then the diffusion behaviors of C and Co were investigated by analyses of compositional change, also determined for microstructure and microhardness. Also, same testing was carried out on the specimens with dual layers sintered in upright and reverse positions to evaluate the effect of gravity on the diffusion in liquid Co. From the results of this study, we can find the fact that the direction of diffusion for C and Co in WC-Co system during liquid phase sintering was different and the effect of gravity for the liquid was insignificant. Also other physical properties were changed on the diffusion of elements.

• 한국재료학회지
• /
• 제11권1호
• /
• pp.8-14
• /
• 2001

Ni기 초내열합금 GTD 111의 미세조직의 변화와 크리프 파단특성에 대해 연구하였다. 조직관찰을 통해 본 합금의 응고거동과 주조 후 응고과정에서 석출거동을 분석하였다. MC탄화물의 생성위치가 $\gamma$/$\gamma$' 상 보다 수지상 중심에서 가까운 것으로 MC탄화물이 $\gamma$/$\gamma$'공정상보다 먼저 응고된 것을 확인할 수 있었다. $\eta$상은 Ti가 많은 $\gamma$'상에서 변태되어 형성되었으며, $\gamma$/$\gamma$'공정상에서 η상으로의 변태에 따라 $\eta$상 근처에 PFZ가 형성되고 PFZ 내부에 TaC가 석출됨을 확인하였다. $871^{\circ}C$이상의 온도에서 크리프 파단은 결정입계를 따라 진행되는 것이 명확하였으며, 표면에서 형성된 균열과 내부에서 생성된 균열이 전파, 조합되어 최종파단을 초래하였다. 결정입계 균열의 생성은 최종응시 형성된 미세공동과 밀접한 관계가 있는 것으로 분석되었으며, $\eta$상과 PFZ는 균열 생성에 큰 영향을 주지 않았다.

• 소성∙가공
• /
• 제11권5호
• /
• pp.447-456
• /
• 2002

A study has been made to investigate the boundary sliding and its accommodation mode with respect to the variation of $\alpha$$_2$/$eta$ volume fraction during superplastic deformation of two-phase Ti$_3$Al-xNb intermetallics. Step strain rate and load relaxation tests have been performed at 950, 970 and 99$0^{\circ}C$ to obtain the flow stress curves and to analyze the deformation characteristics by the theory of inelastic deformation. The results show that the grain matrix deformation and boundary sliding of the three intermetallics containing 21, 50 and 77% in $eta$ volume fractions are well described by the plastic deformation and viscous flow equations. Due to the equal accommodation of both $a^2$ and $\beta$ phases, the accommodation modes for fine-grained materials are in good agreement with the iso-strain rate models. The sliding resistance analyzed for the different boundaries is the lowest in the $\alpha$$_2$/$\alpha$$_2$ boundary, and increases in the order of $\alpha$$_2$/$\alpha$$_2$<< $\alpha$$_2$/$\beta$ = $\beta$/$\beta$, which plays an important role in controlling the superplasticity of the alloys with the various $\alpha$$_2$/$\beta$ phase ratio.

• 한국전자통신학회논문지
• /
• 제1권1호
• /
• pp.49-55
• /
• 2006

Applied by periodic Stimulating Currents in Bonhoeffer -Van der Pol(BVP) model, chaotic and periodic phenomena occured at specific conditions. The conditions of the chaotic motion in BVP comprised 0.7182< $A_1$ <0.792 and 1.09< $A_1$ <1.302 proved by the analysis of phase plane, bifurcation diagram, and lyapunov exponent. To control the chaotic motion, two methods were suggested by the first used the amplitude parameter A1, $A1={\varepsilon}((x-x_s)-(y-y_s))$ and the second used the temperature parameterc, $c=c(1+{\eta}cos{\Omega}t)$ which the values of ${\eta},{\Omega}$ varied respectlvly, and $x_s$, $y_s$ are the periodic signal. As a result of simulating these methods, the chaotic phenomena was controlled with the periodic motion of periodisity. The feasibilities of the chaotic and the periodic phenomena were analysed by phase plane Poincare map and lyapunov exponent.

• 분석과학
• /
• 제12권1호
• /
• pp.40-46
• /
• 1999

Zn-Ni 도금강판의 도금층 구조 및 형상 변화에 미치는 도금 제조 조건중, 전류 밀도, $Ni^{2+}$ 이온 농도, $Cl^-$ 이온 농도 등의 영향에 대하여 고찰하였다. 먼저 도금 조건의 중요한 변수 중의 하나인 전류 밀도를 변화시켰을 때 전류 밀도가 감소함에 따라 도금층 중의 Ni 함량은 증가하였다. 또한 도금 용액 중의 $Cl^-$ 이온과 $Ni^{2+}$ 이온 농도가 증가하면 도금층의 Ni 함량이 증가하였다. 이러한 도금층 중의 Ni 함량은 도금층의 구조 변화와 밀접한 관계를 나타내었다. 즉, Ni 함량이 10 wt.% 미만인 경우에는 ${\eta}$상과 ${\gamma}$상의 혼합 구조를 가지는데 비해서 10 wt.% 이상이 되면 ${\gamma}$단일상으로 변환되었다. 그리고 ${\eta}$상의 구조에서 Ni 함량이 증가함에 따라 a축 방향의 격자 상수는 증가하고 c축 방향의 격자 상수는 감소하였다. 한편 도금층의 형상 변화는 도금층의 조성과 결정구조가 달라짐에 따라 판상의 결정립 형태에서 부터 작은 구상의 입자상에 이르기까지 다양한 변화를 나타내었다.

• 한국표면공학회지
• /
• 제28권5호
• /
• pp.320-328
• /
• 1995

The electroplated steel sheets were heated during the short periods(10~60 seconds) at high temperature ($360^{\circ}C$～$500^{\circ}C$) in order to investigate thermal diffusion behaviors. When the steel sheets were heated for 10 seconds, all the coated layers were alloyed at $420^{\circ}C$ but at temperature lower than $400^{\circ}C$ the $\eta$ phase partially remained on the coated surface. At higher temperature, the longer the time for heat treatment the iron contents were increased in coated layer but the glossiness and whiteness of the coated surface were decreased. While the alloying phases of $\eta$, $\zeta$, $\delta_1$ and $\Gamma$ were appeared in the coated layer at the heat treatment temperature of $360^{\circ}C$, the phase was disappeared at $420^{\circ}C$ but the rests grew in size at the temperature of $440^{\circ}C$. When the heat treatment temperature and heating time were increased, the thickness of $\Gamma$ phase was rapidly increased to 0.8 $\mu\textrm{m}$. The optimum conditions for the heat treatment to prevent powdering of coated layer were obtained to heat it for 30 seconds at $400^{\circ}C$ and 10 seconds at $440^{\circ}C$, and the iron content in coated layer was suited to be 10 percents.

• Bulletin of the Korean Chemical Society
• /
• 제3권1호
• /
• pp.23-30
• /
• 1982

For the study of transport phenomena of an aqueous NaCl solution through a cuprophane membrane, a new apparatus was constructed. The volumc flow rate Q, the permeability coefficient U, and the permeability constant K were measured or determined by using this apparatus. The experimental temperature range was 5 to $35^{\circ}C$, and the applied pressure increments were 10 to 40 psi. By assuming that the cuprophane membrane is composed of n parallel cylindrical capillaries of circular cross-section and that the flow of the solution through the capillaries follows the Poiseulle law, the mean radius r of the capillaries and the number n of the latter in the membrane were evaluated. By using a reasonable assumption concerning the radius ${\eta}'$ of the species diffusing through the membrane, it was concluded that the contribution of the diffusive flow to the total flow rate Q is less than 10%. Thus, the Q was treated as the rate due to the viscous flow, and the viscosity ${\eta}_m$ of the solution in the membrane phase was evaluted, and it was found that ηm is nearly equal to ${\eta}_b$, the bulk viscosity of the solution. From this fact, it was concluded that in the capillaries, no change occurs in the physical state of the NaCl solution. The value of ( = 4.27 kcal/mole) and ${\Delta}Sm^{\neq}$(4.28 eu) were obtained for the viscous flow. A possible explanation was given.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.354-354
• /
• 2006

• 대한화학회지
• /
• 제33권2호
• /
• pp.263-270
• /
• 1989

금속알루미늄 조각과 alcohols을 반응시켜 Al-alkoxides를 합성하였으며 이것을 가수분해하여 얻은 Al-hydroxides와 시약 AlCl3로부터 얻은 Al-hydroxides를 여러 온도에서 소성하여 여러 상의 고순도 $Al_2O_3$를 제조하였다. 제조한 ${\gamma}$와 ${\eta}$상 알루미나의 촉매적 특성을 알아보았고, $Al(OH)_3$로부터 ${\alpha}-Al_2O_3$의 생성과정을 속도론적으로 고찰하였다.