• Journal of the Korean Geographical Society
• /
• v.29 no.3
• /
• pp.253-265
• /
• 1994

The hydraulic-geometrica1 relations between the riverbed slope and water discharge and other hydraulic variables in some selected alluvial rivels in Korea have been investigated. The rivers from which the data relevant to this study were collected are mainly the first tributaries, considered to be mostly in the equilibrium state, of the 10 major rivers in Korea. The investigating methods adopted in this study are similar to the one suggested by Leopold and Maddock and the one suggested by Garde. All of 18 rivers their drainage areas of which range between 100-2,000 $\textrm{km}^2$ were considered and the changes in riverbed slope, drainage area, bed material size along the downstream river distance were measured. It is found in this study that the change in the riverbed slope, S, along the downstream can be expressed in terms of the coefficient, $\beta$, expressing the change in the drainage area along the downstream and the drainage area, A, by an empirical relation as 0.0063 0.0063 S = $S_{ 0}$ $A_{0}$$^{-------- +0.51}$A-$^{-------- -0.51}$. $\beta$ $\beta$ According to this relation, the riverbed slope of the river reaches investigated in this study appear to be proportional to the -0.6th power of the drainage area. This result is consistent with the previous ones obtained by Hack.k.

• Journal of Korean Physical Therapy Science
• /
• v.13 no.2
• /
• pp.99-119
• /
• 2006

Endothelin (ET) is a 21 amino acid peptide with multifunctional effects on the vasculature as well as a variety of other cell types such as respiratory, gastrointestinal, urogenital, endocrine, central nervous systems, and others. Endothelin has emerged as a modulator by autocrine and paracrine actions for many cellular activities, including vasoconstriction, cell proliferation, hormone production, neurotransmitter and/or neuromodulator. The endothelin family consists of three closely related peptides, ET-1, ET-2, and ET-3 derived from separate genes, such as chromosome 6, 1, and 20, respectively. ET-1 is the predominant isoform produced in the cardiovascular system and about which most is known. Endothelin receptors are seven-transmembrane GTP-binding protein-coupled receptors, which are classified into endothelin-A (ETA) and endothelin-B (ETB) receptors. Interestingly, recent evidence is accumulating to suggest that ET -1 may contribute to a variety of pain states such as allodynia and hyperalgesia in animals and humans. Therefore, in this review the biological characteristics and contraction-related mechanism of endothelin-1 in mammalian cells will be summarized. Especially, we focus on multifunctional roles for ET-1 in noxious stimulation-induced pain for the study of pain specialized physical therapy.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.638-643
• /
• 1999

In this study we prepared 5 types of nutritional beverage base samples containing various ratios of soy protein isolate (SPI) and sodium caseinate as protein source. The rheological properties of each sample were measured and the results were as followes; Samples changed their rheological properties with the ratio of SPI. Samples represented newtonian property with low ratio of SPI, pseudoplastic property with the increment of SPI, and bingham pseudoplastic property with higher increment of SPI (80% as protein source). In this result we conjectured that the more was the SPI, the more was the formation of progel during heat treatment, which could be the reason of the rheological changes. In the test of the relationship between temperature and apparent viscosity, apparent viscosity of samples decreased along with the increment of temperature. In observing the relationship between time and apparent viscosity, we found sample, containing high ratio of SPI (80%), represented thixotropic property clearly with the hysteresis loop.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.75-82
• /
• 2015

Major corporations and portals have implemented a link server that connects Content Management Systems (CMS) to the physical address of content in a database (DB) to support efficient content use in web-based environments. In particular, a link server automatically connects the physical address of content in a DB to the content URL shown through a web browser screen, and re-connects the URL and the physical address when either is modified. In recent years, the number of users of digital content over the web has increased significantly because of the advent of the Big Data environment, which has also increased the number of link validity checks that should be performed in a CMS and a link server. If the link validity check is performed through an existing URL-based sequential method instead of petabyte or even etabyte environments, the identification rate of dead links decreases because of the degradation of validity check performance; moreover, frequent link checks add a large amount of workload to the DB. Hence, this study is aimed at providing a link server that can recognize URL link deletion or addition through analysis on the B-tree-based Information Identifier count per interval based on a large amount of URLs in order to resolve the existing problems. Through this study, the dead link check that is faster and adds lower loads than the existing method can be performed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1081-1088
• /
• 2013

Two new metal-free organic dyes bridged by anthracene-mediated ${\pi}$-conjugated moieties were successfully synthesized for use in a dye-sensitized solar cell (DSSC). A N,N-diphenylthiophen-2-amine unit in these dyes acts as an electron donor, while a (E)-2-cyano-3-(thiophen-2-yl)acrylic acid group acts as an electron acceptor and an anchoring group to the $TiO_2$ electrode. The photovoltaic properties of (E)-2-cyano-3-(5-((10-(5-(diphenylamino)thiophen-2-yl)anthracen-9-yl)ethynyl)thiophen-2-yl)acrylic acid (DPATAT) and (E)-2-cyano-3-(5'-((10-(5-(diphenylamino)thiophen-2-yl)anthracen-9-yl)ethynyl)-2,2'-bithiophen-5-yl)acrylic acid (DPATABT) were investigated to identify the effect of conjugation length between electron donor and acceptor on the DSSC performance. By introducing an anthracene moiety into the dye structure, together with a triple bond and thiophene moieties for fine-tuning of molecular configurations and for broadening the absorption spectra, the short-circuit photocurrent densities ($J_{sc}$), and open-circuit photovoltages ($V_{oc}$) of DSSCs were improved. The improvement of $J_{sc}$ in DSSC made of DPATABT might be attributed to much broader absorption spectrum and higher molecular extinction coefficient (${\varepsilon}$) in the visible wavelength range. The DPATABT-based DSSC showed the highest power conversion efficiency (PCE) of 3.34% (${\eta}_{max}$ = 3.70%) under AM 1.5 illumination ($100mWcm^{-2}$) in a photoactive area of $0.41cm^2$, with the $J_{sc}$ of $7.89mAcm^{-2}$, the $V_{oc}$ of 0.59 V, and the fill factor (FF) of 72%. In brief, the solar cell performance with DPATABT was found to be better than that of DPATAT-based DSSC.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.39-49
• /
• 1986

The purpose of this study was to observe characteristic properties through the polarization curves and SEM images from 4 different types of amalgam obtained by using the potentiostats (Princeton EG & G) & SEM (Jeol/35), and to investigate the degree of corrosion on the oxidation peak of the each phase of amalgam. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by means of the mechanical amalgamator (Shofu Co.), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10.0mm in height and was condensed by using routine manner. The specimen was removed from the mold and stored at room temperature for about 24 hours. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to confirm the corrosion behaviour of the amalgams in a 0.9% saline solution (P.H: 6.8-7.0) at $37^{\circ}C$. The initial rest potential (corrosion potential) was determined after 30 minutes of immersion of specimen in electrolyte, and the potential scan was begun at the point of 100mV cathodic from the corrosion potential. The scan rate was 0.17mV/sec. in the study to observe the degree of corrosion of each phase. SEI and EPMA images on the determined oxidation peaks of each amalgam were observed. The results were as follows: 1. In the four anodic polarization curves, low copper amalgams have three oxidation peaks and high copper amalgams have two oxidation peaks, -270mV, +26mV and +179mV(SEC) in the low copper lathe cut, and -300mV, +39mV and +163mV(SEC) in the low copper spherical. -4mV and +154mV(SEC) in the Dispersalloy, and +17mV and +180mV(SEC) in the Tytin as high copper amalgams. 2. ${\gamma}_2$ phase in the low copper amalgam and ${\eta}$ phase in the high copper amalgam were the most corrodible phases and Ag-Cu eutectic in high copper amalgam was the most slowly corroded phase. 3. Low copper amalgam was more susceptible in corrosion than high copper amalgam.

• Restorative Dentistry and Endodontics
• /
• v.13 no.2
• /
• pp.221-235
• /
• 1988

The purpose of this study was to observe characteristic properties through the polarization curves and EMPA images from 4 different types of amalgam obtained by using the potentiostats (EG & G PARC) & EPMA (Jeol JSM-35), to investigate the degree of corrosion of each phase of amalgam on the oxidation peak, and to identify corrosion products from the corroded amalgam by use of X-ray diffractometer(Rigaku). After each amlgam alloy and Hg were triturated as the direction of the manufacturer by means of the mechanical amalgamator(Shofu), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10mm in height and was condensed by means of routine manner. The specimen was removed from the mold and stored at room temperature for about 7 days. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to compare the corrosion behaviours of the amalgams in 0.9% saline solution(pH6.8~7.0) and artificial saliva (pH6.8~7.0) at $37^{\circ}C$. The open circuit potential was determined after 30 minutes' immersion of specimen in electrolyte and the potential scan was begun at the potential of 100mV cathodic from the corrosion potential. The scan rate was 1mV/sec and the surface area of amalgam exposed to the solution was 0.64$cm^2$ for each specimen. All the potentials reported are with respect to a saturated calomel electrode (SCE). EPMA images on the determined oxidation peaks of each amalgam in artificial saliva were observed. X-ray diffraction patterns of each sample were recorded before and after polarization in artificial saliva (Aristaloy, Caulk Spherical, Dispersalloy and Tytin: at +770mV, +585mV, +8.10m V and +680m V respectively) by use of a recording diffractometer. Nickel filtered Cu $K_{{\alpha}_1}$ radiation was used and sample was scanned at $4^{\circ}(2{\theta})/min.$ from $25^{\circ}$ to $80^{\circ}$. The following results were obtained. 1. Oxidation peak potential in artificial saliva shifted to more anodic direction than that in saline solution. 2. The corrosion potential of high copper amalgam was more anodic than the potential of low copper amalgam. 3. The current density was lower in artificial saliva than in saline solution. 4. One of the corrosion products, AgCl was identified by X-ray diffraction analysis. 5. ${\gamma}_2$ phase was the most susceptible to corrosion and e phase was stable in low copper amalgam and ${\eta}$' phase and Ag-Cu eutectic were susceptible to corrosion in high copper amalgam.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.2
• /
• pp.119-127
• /
• 1986

The rheological properties of mayonnaise were studied with cylindrindrical viscometer. It was observed that mayonnaise showed pseudoplastic behavior, yield stress and time dependent characteristics. In the initial period of shear time, the decay of viscosity of mayonnaise was followed by a second-order kinetic equation. The influence of temperature on viscosity could be described by Arrhenius equation. The apparent viscosity of mayonnaise markedly increased with an rise in the concentration of egg yolk; and the emulsion was most stable at the concentration of 12%. At the concentration of $65{\sim}75%$ oil, the apparent viscosity was increased; the maximum value was reached at 75% oil, and above 75% oil, the remarkable decreased was observed. The size of oil drops was decreased with an increase in oil concentration of 75% oil. The apparent viscosity of mayonnaise was increased with an rise in water contents, while being decreased with one in the concentration of vinegar.

• Biomedical Science Letters
• /
• v.16 no.2
• /
• pp.119-122
• /
• 2010

Interleukin-1${\beta}$ $(IL-1{\beta})$ is one of the key proinflammatory cytokines and it plays an important role for the antimycobacterial host defense mechanisms. In this study, we examined Mycobacterium tuberculosis (MTB)-stimulated induction of IL-1${\beta}$ and evaluated the associated signal transduction pathways. In PMA-differentiated THP-1 cells, MTB infection increased mRNA expression of IL-$1{\beta}$ in a dose-dependent manner. The expression of IL-1${\beta}$ mRNA began to be induced at 1.5 h after infection, and induced expression of IL-1${\beta}$ was retained for 48 h after MTB infection. The increase in expression of IL-1${\beta}$ caused by MTB was reduced in cells treated with Ro-31-8425 (an inhibitor of PK$C{\alpha}$, ${\beta}I$, ${\beta}II$, ${\gamma}$, ${\varepsilon}$) or PD98059 (an inhibitor of MEK1), meanwhile, pre-treatment with $G\ddot{o}6976$ (an inhibitor of $Ca^{2+}$ dependent PK$C{\alpha}$ and PK$C{\beta}I$) or Rottlerin (an inhibitor of PK$C{\delta}$) has no effect on MTB-induced expression of $IL-1{\beta}$ mRNA. These results show that the expression of $IL-1{\beta}$ mRNA caused by MTB may be mediated via MEK1 and PKC isoforms including PK$C{\beta}II$, $PKC{\gamma}$, or $PKC{\varepsilon}$. Further studies are required to determine whether other PKC isoforms $(PKC {\eta},\;{\theta},\;{\varepsilon},\;and\;{\lambda}/{\iota})$, except $PKC{\delta}$, $PKC{\alpha}$, and $PKC{\beta}I$, are also involved in $IL-1{\beta}$ mRNA expression after mycobacterial infection.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.502-507
• /
• 2001

The effect of solidification rate on the microstructure of directionally solidified IN792+ Hf superalloy has been studied. Solidification sequence and precipitation behavior of the alloy have been analysed by microstructural observation. The script carbide transformed to faceted carbide with decreasing solidification rates. The incorporation of ${\gamma}$ phase into the faceted carbide was due to dendritic growth of carbides. Some elongated carbide bars formed along the grain boundaries at a solidification rate of 0.5$\mu\textrm{m}$/s. Two zones, ${\gamma}$' forming elements enriched zone and depleted zone, were found in the residual liquid area. Eutectic ${\gamma}$/${\gamma}$' nucleated in the f forming elements enriched zone. Formation of eutectic ${\gamma}$/${\gamma}$' increased the ratio of (Ti+Hf+Ta+W)/Al and induced η phase precipitation. The ratio of (Ti+Hf+Ta+W)/Al decreased at lower solidification rates due to sufficient back diffusion in the residual liquid area. Hence, the Precipitation of the η Phase efficiently suppressed at the lower solidification rate.