• 제목/요약/키워드: ${\eta}$

검색결과 978건 처리시간 0.025초

국소마취제가 Synaptosomal Plasma Membrane Vesicles의 유동성에 미치는 영향 (Effects of Local Anesthetics on the Fluidity of Synaptosomal Plasma Membrane Vesicles Isolated from Bovine Brain)

  • 윤일;한석규;백승완;김남홍;강정숙;정준기;이은주
    • 대한약리학회지
    • /
    • 제24권1호
    • /
    • pp.43-52
    • /
    • 1988
  • 국소마취제의 약리학적 작용기전을 탐구키 위하여 소의 신선한 대뇌피질로부터 synaptosomal plasma membrane vesicles(SPMV)를 분리한 후 그 소수성 중심부의 microviscosity에 미치는 국소마취제의 영향을 pyrene 형광 probe법으로 측정한 결과 lidocaine HCI과 procaine HCI이 microviscosity를 낮춘다는 것을 알았고 그 정도는 procaine HCI에 비하여 tidocaine.HCI이 더욱 컸다. 또 국소마취 제 가 dimyristoylphosphatidylcholine (DMPC) multilamellar liposomes의 상전 이온도를 낮추며 cooperative unit크기를 감소시킨다는 것도 시차 열량분석법으로 알게 되었다. 상전이온도와 cooperative unit 크기의 감소 정도는 dibucaine HCI>tetracaine HCI>lidocaine HCI > procaine HCI의 순이었다.

  • PDF

저농도 용액에서의 Carboxymethyl Chitin의 사슬배좌와 전해질 거동 (The Configuration and Polyelectrolyte Behavior of Carboxymethyl Chitin in Low Concentration Solution)

  • 박성민;이근태;김상무
    • 한국수산과학회지
    • /
    • 제28권4호
    • /
    • pp.451-456
    • /
    • 1995
  • CM-chitin 분자의 고유특성을 규명하기 위하여 물성학적 방법으로 저농도 용액에서의 CM-chitin의 고유특성인 사슬배좌와 전해질 거동에 대하여 조사하였다. 비교란 상태에서 CM-chitin 사슬의 양단간 거리는 $127{\AA}$효에서 $113{\AA}$으로 분자량이 작을수록 양단간 거리는 좁혀지는 경향을 보였다 회전반경의 경우에도 $52{\AA}$에서 $46{\AA}$으로 양단간 거리와 같은 경향을 보였다. 팽창인자는 분자량에 관계없이 거의 일정하게 나타났으며, 결합사슬의 길이는 $14.5{\AA}$이었다. 그리고 교란 상태에서 CM-chitin의 Flory 점도상수는 $2.35\times10^{21}$이었다. CM-chitin의 이온강도에 따른 고유점도의 변화에 있어서 이온강도가 0.02일 때 고유점도는 1.95d1/g이었으며, 이온강도 1.0일 때는 고유점도가 1.06dl/g로 이온강도가 증가함에 따라 고유점도는 감소하는 경향을 보여 CM-chitin이 전해질임이 확인되었다. 그리고 전하를 완전히 제거한 상태에서의 CM-chitin의 고유점도$([\eta]_\infty)$는 0.91dl/g이었다. 한편 사슬의 유연성은 k-carrageenan과 거의 같은 것으로 나타났다.

  • PDF

Effect of Lidocaine-HCl on Microviscosity of Phosphatidylcholine Model Membrane

  • Chung, In-Kyo;Kim, Inn-Se;Choi, Chang-Hwa;Cho, Goon-Jae;Kim, Jin-Bom;Son, Woo-Sung;Jang, Hye-Ock;Yun, Il
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제4권3호
    • /
    • pp.243-251
    • /
    • 2000
  • In order to provide a basis for studying the molecular mechanism of pharmacological action of local anesthetics and to develop a fluorescence spectroscopic method which can detect the microviscosity of native and model membranes using intramolecular excimerization of 1,3-di(l-pyrenyl)propane (Py-3-Py), we examined the effect of lidocaine HCl on the microviscosity of model membranes of phosphatidylcholine fraction extracted from synaptosomal plasma membrane vesicles (SPMVPC). The excimer to monomer fluorescence intensity ratio (I'/I) of Py-3-Py in liquid paraffin was a simple linear function of $T/{\eta}.$ Based on this calibration curve, the microviscosity values of the direct probe environment in SPMVPC model membranes ranged from $234.97{\pm}48.85$ cP at $4^{\circ}C$ to %19.21{\pm}1.11$ cP at $45^{\circ}C.$ At $37^{\circ}C,$ a value of $27.25{\pm}0.44$ cP was obtained. The lidocaine HCl decreased the microviscosity of SPMVPC model membranes in a concentration-dependent manner, with a significant decrease in microviscosity value by injecting the local anesthetic even at the concentration of 0.5 mM. These results indicate that the direct environment of Py-3-Py in the SPMVPC model membranes is significantly fluidized by the lidocaine HCl. Also, the present study explicitly shows that an interaction between local anesthetics and membrane lipids is of importance in the molecular mechanism of pharmacological action of lidocaine HCl.

  • PDF

연구개발서비스업에서의 비즈니스모델 혁신: 자동차 연구개발전문기업의 사례 연구 (Business Model Innovation in the R&D Service Sector: A Case Study of Automobile R&D-service Firms)

  • 김진형;김정호;박선영
    • 기술혁신연구
    • /
    • 제22권4호
    • /
    • pp.21-55
    • /
    • 2014
  • 최근 치열해지는 시장경쟁과 함께 가속화 다양화되는 기술혁신의 환경 변화로 인해 기업들은 기존의 제품혁신이나 한정된 서비스의 제공만으로는 고객들의 요구와 기대를 충족시킬 수 없게 되었으며, 비즈니스모델(BM) 혁신을 통해 그 해법을 찾고자 하고 있다. 본 연구에서는 BM혁신과 관련된 이론적 논의를 검토하여 연구개발서비스업 내 BM혁신의 필요성과 성공 요건에 관한 명제들을 도출하고, 자동차 R&D서비스업에서 선도적 글로벌 기업인 AVL과 ETAS의 BM혁신에 대한 사례를 연구함으로써 명제들을 검증하고 시사점을 도출하고자 하였다. 특히, BM이 혁신을 통한 가치 창출의 과정에서 중요한 역할을 하는 점을 감안하여, 본 연구는 연구개발서비스업 분야에서 기술적 역량을 갖춘 기업이 BM혁신을 통해 어떻게 성과를 도출할 수 있는가에 대해 살펴보았다. 본 연구의 결과에 따르면, 사례기업들은 고객을 위한 가치 제안과 기업의 이윤 창출을 극대화하기 위해 제품(기술)-서비스 융합에 기반한 BM을 수립하고 자사에 적합한 보완적 자산을 차별적으로 활용함으로써 BM혁신을 효과적으로 수행하였다. 본 연구는 국내 기술혁신경영분야에서 BM혁신에 대한 논의를 활성화하며, 국내 연구개발서비스업과 연구개발전문기업들이 향후에 혁신적 BM에 기반해 효과적으로 발전하기 위한 시사점을 제공하는데 기여하고자 한다.

대형구조물의 진동 감소를 위한 슬라이딩 모드 퍼지 제어기의 설계 (Design of Sliding Mode Fuzzy Controller for Vibration Reduction of Large Structures)

  • 윤정방;김상범
    • 한국지진공학회논문집
    • /
    • 제3권3호
    • /
    • pp.63-74
    • /
    • 1999
  • 대형구조물의 진동감소를 위한 슬라이딩 모드 퍼지 제어기(Sliding Mode Fuzzy Control SMFC)에 대하여 연구하였다 본 제어기에 사용된 퍼지 추론기의 규칙은 비선형 제어기법의 하나인 슬라이딩 모드 제어기를 기반으로 하여 구성되었다 그결과 제어기의 퍼지성은 제어시스템을 시스템 계수의 불확실성과 구조물에 작용되는 외부하중의 불확실성에 대하여 강인한 성질은 갖게 하였으며 제어 규칙의 비선형성으로 인하여 제어기는 선형제어기에 비하여 보다 효율적인 되었다 복잡한 수학 해석에 기반한 종래의 제어기법에 비하여 퍼지 이론에 기반한 본 제어기법은 제어기의 설계절차가 매우 편리하다는 장점을 갖게 된다. 제안된 제어기법의 검증을 위하여 미국 토목학회 산하 구조제어위원회(ASCE Committee on Structural Control)에서 주도한 벤치마크 문제에 대하여 적용시켜 보았다 본 연구의 제어결과를 다른 연구자들에 의하여 발표된 {{{{ ETA _mixed _2$\infty$ }}, optimal polynomial control neural networks control 슬라이딩 모드 제어의 벤치마크 결과와 비교하였으며 그 결과 제안된 제어기법이 구조물의 진동을 매우 효율적으로 감소시키며 제어기의 설계절차가 쉽고 편리함을 확일 할 수 있었다.

  • PDF

알칸의 탈수소화반응에서의 촉매독 화합물의 분자구조 (Molecular Structure of PCP Pincer Complexes: Poisoning Catalyst on the Dehydrogenation of Alkanes)

  • 이지현;전상진;권기혁;이도원
    • 한국결정학회지
    • /
    • 제16권1호
    • /
    • pp.43-53
    • /
    • 2005
  • 알칸화합물(alkanes)에서 탄소-수소결합을 활성화시켜서 더욱 값이 비싸고 더 유용한 알켄화합물(alkenes)로 만들 수 있는 촉매를 만들고자 지난 수 십 년간 많은 화학자들이 연구해왔다 이러한 목적의 하나로서 두개의 수소를 가지는 이리디움 P-C-P핀서(pincer) 착물 $(IrH_2{C_6H_3-2,6-(CH_2PBu_2^t)_2})$을 성공적으로 합성하였다. 이 착물은 알칸의 탈수소화반응(dehyrogenation)에 아주 효과적인 촉매로 알려졌다 알칸의 탈수소화반응에 촉매독으로 작용하는 질소, 물, 이산화탄소 및 일산화탄소와 같은 작은 화합물들과 직접 반응시켜서 어떻게 촉매독으로 작용하는지를 알아봤다. 촉매독으로 작용할 수 있는 화합물들을 합성하여 핵자기공명분광법(NMR)과 적외선분광법(IR)으로 확인하였고 분자구조를 알아보기 위해서 단결정X-ray 회절법을 통하여 확인하였다. 본 논문에서는 촉매 및 촉매독물질의 합성과 분자구조와 각각의 화합물의 반응성과 특이성을 알아보았다.

PIN形 非晶質 硅素 太陽電池의 製作 및 特性 (Fabrication and Characteristics of PIN Type Amorphous Silicon Solar Cell)

  • 박창배;오상광;마대영;김기완
    • 대한전자공학회논문지
    • /
    • 제26권6호
    • /
    • pp.30-37
    • /
    • 1989
  • Silane($SiH_4$), methane($CH_4$), diborane(B_2H_6)그리고 phosphine($PH_3$)을 이용하여 rf글로방전분해법으로 PIN형 a-SiC:H/a-Si:H 이종접합 태양전지를 제작하였다. $SnO_2/ITO$층 형성치 태양전지의 효율은 ITO 투명전극만의 경우보다 1.5% 향상되었다. 제작조건은 P층의 경우 $CH_4/SiH_4$의 비를 5로 하고 두께는 $100{\AA}$이었다. I층은 P층위에 증착하였으나 진성이 아니고 N형에 가깝다. 이 I층을 진성으로 바꾸기 위해서 0.3ppm의 $B_2H_6$$SiH_4$에 혼합하여 5000${\AA}$증착했다. 또한 N층은 $PH_4/SiH_4$의 비를 $10^{-2}$로 하여 $400{\AA}$ 증착시켰다. 그 결과 입사강도가 15mW/$cm^2$일 때 개방전압 $V_{oc}=O'$단락전류밀도 $J_{sc=14.6mA/cm^2}$, 충진율 FF=58.2%, 그리고 효율 ${eta}=8.0%$를 나타내었다. 빛의 반사에 의한 손실을 감소시키기 위하여 $MgF_2$를 유리기판위에 도포하였다. 이에 의한 효율은 0.5% 향상되어 전체적인 효율은 8.5%였다.

  • PDF

대도시 위해.위험시설에 대한 안전도 수용기준 정립에 관한 연구 (Study on the Establishment of a Safety Allowance Level of Disastrous and Hazardous Facilities in Large Cities)

  • 고재선;윤명오
    • 한국화재소방학회논문지
    • /
    • 제15권1호
    • /
    • pp.84-92
    • /
    • 2001
  • 현대 사회에 있어서 인구 과밀화와 더불어 대도시의 사회기반시설(SOC)증가에 따른 화학물질 사용시설의 중대사고의 경향이 높아져 가고 있다. 기존 위해·위험시설의 안전사고의 문제점과 더불어 신규 위해·위험시설물의 증가에 따른 안전사고의 심각성을 낮추기 위해 필요한 노력을 하지 않으면 안된다. 선진국에서는 산업시설 그리고 지역사회의 전문위원회가 잠재적인 위해 산업의 사고에 대한 off site 및 on site의 피해 심각성에 대한 평가와 이에 대한 적절한 조언 및 대책을 강구하고 있다. 따라서 본 연구에서는 국내의 위해·위험시설에 대한 안전도 수용기준 성립을 위하여 첫째, 영국 HSE(Heath & Safety Executive)의 QRA(Quantified Risk Assessment)와 Matrix of Risk of Evaluated Sources of Hazard를 적용한 사회적 위험성 평가 방법과 둘째, FTA(Fault Tree Analysis) 또는 ETA(Event Tree Analysis) 등 정량적인 사고 발생 확률과 시뮬레이션 및 계산식을 통해 국내 임의의 지역에 대하여(서울시 위해·위험시설)사고 피해 정도의 개인적 위험성을 평가, 적용함으로서 기존 시설 또는 신설 부지 개발을 위한 제한시 포괄적 안전도 수용기준(수용가능성) 여부를 판별하고자 한다.

  • PDF

고혈압 환자의 생활양식과 삶의 질에 관한 구조 Model (Structural Model on Hypertensive Patient's Lifestyle and Quality of Life)

  • 이종렬;박천만
    • 보건행정학회지
    • /
    • 제14권3호
    • /
    • pp.66-96
    • /
    • 2004
  • This study was intended to describe the hypertensive patient's lifestyle and quality of life by creating a hypothetic model on the lifestyle and quality of life and by examining a causeand effect relationship, and to contribute to countermeasures for practicing their lifestyle and improving the quality of life through creating a predictable model. Exogenous variable($\xi$) of hypothetic model in this study composed of a family support, hypertension knowledge, perceived benefit and toughness. Endogenous variable($\eta$) composed of self-esteem, perceived health state, depression, lifestyle and quality of life. There were 6 measured variables for exogenous variable(x). There were 9 measured variables(y) for endogenous variable. Also, there was error variable ($\delta,\;\epsilon$) of an individual. The survey was conducted for 207 hypertensive parents who received an out-patient service for 3 weeks from September 15, 2003 to October 3, 2003 after diagnosing as hypertension from 2 general hospitals in Daegu. As the conformance of hypothetic model in this study, there were $x^2$= 155.81, standard $x^2$ ($x^2$/df)=2.32, GFI=0.003, NFI=0.971, CFI=0.982, and RMSEA=0.080. Generally, the hypothetic model and actual data were well coincided. The higher the hypertension knowledge was(t=6.030), the higher the perceived benefit was(t=9.429), the higher the toughness was(t=2.783), and the higher the perceived health state was(t=2.282), the higher the lifestyle was. However, the degree of depression (t=-0.038), family support(t=1.161), and self-esteem(t=0.518) was not affected. The higher the family support was(t=10.476), the higher the self-esteem was(t=7.244), the higher the perceived health state was(t=6.996), the lower the degree of depression was(t=-2.044), and the higher the practice degree of lifestyle was(t=3.315), the higher the quality of life was. However, the toughness(t=1.672) didn't have a significant influence on the quality of life. It was modified to increase the model conformance and gain a conscious model As the result of model revision, for the model conformance, there were $x^2$= 118.43, standard $x^2$=1.69, GFI=0.923, NFI=0.976, CFI=0.982, and RMSEA=0.078. As the revised model showed the better conformance than hypothetic model, it seemed to be more suitable model. In the revised model, the perceived benefit(t=9.440) affected the lifestyle in the revised model. Then, the lifestyle was influenced by hypertension knowledge(t=6.139), toughness (t=2.757), family support(t=2.078), perceived health state(t=1.962) in the order. As a factor which affected the quality of life, there were the family support(t=l0.46l), self-esteem(t=7.368), perceived health state(t=6.989), lifestyle(t=3.316), toughness(t=2.584), and depression(t=-1.968) in the order. It showed the significant effect.

2종의 경화액과 혼합된 calcium phosphate cement의 유변학적 성질에 관한 연구 (Rheological Properties of Calcium Phosphate Cement Mixed with 2 Kinds of Setting Solution)

  • 장석우;권호범;유현미;박동성;오태석;배광식
    • 구강회복응용과학지
    • /
    • 제24권3호
    • /
    • pp.311-316
    • /
    • 2008
  • Calcium phosphate cement (CPC)는 우수한 생체 친화성을 바탕으로 치과 및 의과 쪽에서 성공적인 bone substitute로 사용되어 왔다. 긴 경화시간 및 washout tendency 등 CPC의 단점을 개선하기 위해 다양한 종류의 경화액 및 첨가제등에 대한 연구가 이루어졌다. 그러나 첨가제의 종류에 따른 CPC paste의 점탄성을 정량적으로 비교한 연구는 많지 않다. 이 연구에서는 2% hydroxyprophyl methylcellulose (HPMC)와 35% polyacrylic acid (PAA)의 두 가지 경화액과 혼합된 CPC의 유변학적 성질을 관찰하고 비교하고자 하였다. Dicalcium phosphate dihydrate (DCPD)를 2% HPMC 및 35% PAA와 각각 1:1의 분액비로 30초간 섞은 후 cone and plate geometry를 가지는 rheometer를 사용하여 frequency sweep test와 time sweep test를 통해 shear storage modulus (G'), shear loss modulus (G''), 그리고 complex viscosity (${\eta}^*$)를 측정하였다. 2% HPMC군과 35% PAA군의 complex viscostiy의 차이를 Mann-whitney test with Bonferroni's collection을 사용하여 분석하였다. 실험결과 2% HPMC 및 35% PAA 군 모두에서 shear thinning과 yield behavior등 pseudoplastic property를 보였으며 complex viscosity는 HPMC 군에서 PAA 군보다 통계적으로 유의성 있게 높았다. (p<0.05).