• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.100-103
• /
• 2003

The magnetoresistance (MR) of $La_{1-\chi}S_{\chi}CoO_{3-\delta}$ films prepared by pulsed-laser deposition were investigated in order to clarify the magnetotransport properties around the metal-insulator transition. For the films in the metallic state ($\chi$ > 0.25), the MR(T) manifests a small peak at the Curie temperature due to the spin-disorder scattering. The transition of the film into the insulating state ($\chi\;\leq$ 0.25) is accompanied by an essential growth of the MR and results in a significant increase in the MR(T) with decreasing temperature, due to a phase separation into the ferromagnetic-metal clusters and the insulating matrix.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.304-307
• /
• 2001

High quality BSCCO thin films have been fabricated by means of an ion beam sputtering at various substrate temperatures, $T_{sub}$, and ozone gas pressures, $PO_3$. The correlation diagrams of the BSCCO phases appeared against $T_{sub}$ and $PO_3$ are established in the 2212 and 2223 compositional films. In spite of 2212 compositional sputtering, Bi220l and Bi2223 phases as well as Bi2212 one come out as stable phases depending on $T_{sub}$ and $PO_3$. From these results, the thermodynamic evaluations of ${\Delta}H$ and ${\Delta}S$ S, which are related with Gibbs' free energy change for single Bi2212 or Bi2223 phase are performed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.1
• /
• pp.12-16
• /
• 2005

We used electrostatic force microscopy to probe carbon nanotubes. There is a linear relationship between the phase shift (${\Delta}{\phi}^{-l/2}$) and the inverse tube length ($L^{-1}$) of carbon nanotubes. When the distance(h) between the tip and the carbon nanotubes increase, the phase shift on EFM image decrease by a factor of $1/h^2$

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1559-1569
• /
• 2002

In order to investigate the characteristics of electromagnetic flowmeter in two -phase flow, an AC electromagnetic flowmeter was designed and manufactured. In various flow conditions, the signals and noises from the flowmeter were obtained and analyzed by comparison with the observed flow patterns with a high speed CCD camera. The experiment with the void simulators in which rod shaped non-conducting material was used was carried out to investigate the effect of the bubble position and the void fraction on the flowmeter. Based on the results from the void simulator, two -phase flow experiments encompassed from bubbly to slug flow regime were conducted. The simple relation $\Delta$ $U_{TP}$ = $\Delta$ $U_{SP}$ (l-$\alpha$) was verified with measurements of the potential difference and the void fraction. Due to the lack of homogeneity in a rent two -phase flow, the discrepancy between the relation and the present measurement was slightly increased with void fraction and also liquid volumetric flux jf. Whereas there is no difference in the shape of the raw signal between single-phase flow and bubbly flow, the signal amplitude for bubbly flow is higher than that for single -phase flow at the same water flow rate, since the passage area of the water flow is reduced. In the case of slug flow, the phase and the amplitude of the flowmeter output show dramatically the flow characteristics around each slug bubble and the position of a slug bubble itself. Therefore, the electromagnetic flowmeter shows a good possibility of being useful for identifying the flow regimes.ul for identifying the flow regimes.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.184-188
• /
• 2003

We fabricated a P-I-i-I-N $GaAs/Al_{0.35}Ga_{0.65}As$waveguide phase modulator with significant phase shift for the TE mode but negligible for the TM mode. We selected the P-I-i-I-N structure to cause a phase shift about the TM mode. The wavelength of $\lambda=1.55$\mu\textrm{m}$ was measured for both the TE and TM modes, respectively. As a result, the measured phase shift efficiency ($\Delta\phi$) by using the Fabry-Perot resonance method was $7.9^{\circ}/V.mm$ for TE-polarized light. Also, no modulation was observed for TM-polarized light.

• Journal of the Korean Applied Science and Technology
• /
• v.10 no.1
• /
• pp.57-65
• /
• 1993

The fatty acid, all $cis-{\Delta}^{5,11,14}-C_{20:3}$, in the Gingko nuts oils, was isolated and, purified by urea-adduct method, silver ion silica gel chromatography and HPLC equipped with reversed phase ${\mu}-Bondapak$ $C_{18}$ column. Its structural elucidation was conducted by IR and $^1H$-, $^{13}C$-NMR technique. The fatty acid composition of seed oils mainly consists of linoleic acid(37.73%), vaccenic acid(18.30%), oleic acid(15.18%), palmitic acid(3.37%), palmitoleic acid(3.37%) and ${\Delta}^5$ NMDB fatty acids(8.50%) in which all $cis-{\Delta}^{5,11,14}-C_{20:2}$ predominates.

• Journal of the Korean Ceramic Society
• /
• v.55 no.4
• /
• pp.358-363
• /
• 2018

To improve the polarization property of cathodes, which is the main factor limiting the performance of protonic ceramic fuel cells (PCFCs), $K_2NiF_4-type$ $Pr_2NiO_{4+{\delta}}$, which is expected to exhibit a triple conducting property (proton, oxygen ion, and hole conductions) was applied to PCFCs and its properties were investigated. Low-temperature microwave heat-treatment was used to achieve both sufficient interface adhesion between the electrolyte and the cathode layers and suppression of the secondary phase formation due to migration of elements such as barium and cerium. Through this fabrication method, a high performance of $0.82W{\cdot}cm^{-2}$ and low ohmic resistance of $0.06{\Omega}{\cdot}cm^2$ were obtained in an $Ni-BaCe_{0.55}Zr_{0.3}Y_{0.15}O_{3-{\delta}}$ | $BaCe_{0.55}Zr_{0.3}Y_{0.15}O_{3-{\delta}}$ | $Pr_2NiO_{4+{\delta}}$ single cell at $650^{\circ}C$. This result verifies that the $K_2NiF_{4+{\delta}}-type$ cathode shows good chemical compatibility which, in turn, will make it a potent candidate as a PCFC cathode.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.11a
• /
• pp.7-8
• /
• 1993

• Microbiology and Biotechnology Letters
• /
• v.19 no.3
• /
• pp.242-247
• /
• 1991

- Since steroid $\Delta^1$-dehydrogenase synthesis has been known to be inducible, the mechanism of the enzyme induction of Arthrobacter simplex IAM 1660 was investigated. Among various steroids tested for inducers, hydrocortisone was the most effective inducer when hydrocortisone was used as a substrate for steroid $\Delta^1$-dehydrogenase. Steroid $\Delta^1$-dehydrogenase synthesis was effectively induced by progesterone, prednisolone and androstenedione, while the enzyme was less induced by cholesterol and not by phytosterols. The results suggest that the presence of 3-keto group and short side chain of steroids are the favorable factors for the induction of the $\Delta^1$-dehydrogenase synthesis. The enzyme was induced at the highest level when hydrocortisone was added at early log phase to the concentration of 0.01% of the culture and the culture was grown for 15 hours.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.818-823
• /
• 1992

2-Ethylhexanoate compounds which contained Y, Er, Yb, Ba, and Cu were prepared separately. These metallo-organic compounds were dissolved together in the common solvent and the solution was homogeneous. From these solution, high $T_c$ superconductors $YBa_2Cu_3O_{7-\delta}(Y_{123})$, $ErBa_2Cu_3O_{7-\delta}(Er_{123})$, and $YbBa_2Cu_3O_{7-\delta}(Yb_{123})$ were prepared. XRD analysis showed that these superconductors were not single phase and contained some impurity phases including $YBa_2Cu_4O_8(Y_{124})$. This was also confirmed from the magnetic susceptibility measurement. Generally, critical temperatures were higher than that of the superconductors prepared by ceramic method. Volume diamagnetic susceptibility showed little variation compared to the specimen made by ceramic method.