• ETRI Journal
• /
• v.39 no.3
• /
• pp.390-397
• /
• 2017

In this paper, we propose a scheme for designing a tunable pixel layer based on a $Ge_2Sb_2Te_5$ (GST) alloy thin film. We show that the phase change of GST can significantly affect the reflection characteristic when the GST film is embedded into a dielectric encapsulation layer. We investigate the appropriate positions of the GST film within the dielectric layer for high diffraction efficiency, and we prove that they are antinodes of Fabry-Perot resonance inside the dielectric layer. Using the proposed scheme, we can increase the diffraction efficiency by about ten times compared to a bare GST film pixel, and 80 times for the first-to-zeroth-order diffraction power ratio. We show that the proposed scheme can be designed alternatively for a broadband or wavelength-selective type by tuning the dielectric thickness, and we discuss a multi-phase example with a double-stack structure.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.83-87
• /
• 2015

This paper presents a simple notch filter, which is so suitable for three-phase unbalanced and distorted power line. In the d-q synchronous transformation, three-phase unbalanced and distorted voltages generate lots of ripple voltages on d-q axes. The ripples make disturbances on controllers such as PLL of phase tracking. Unbalanced state makes ripple of double the frequency of power line. Odd harmonics 5th and 7th on the line make even 4th and 6th ripples on d-q axes due to the rotating reference frame, respectively. Cascaded two comb filters, delay lines 1/4T and 1/8T, are adopted for the ripple rejection. The filter rejects harmonics 2nd, 4th, 6th, 10th and so on. They are very effective to remove the ripples of both unbalance and distortion. The filter, implemented by two FIFOs on an experimental system, is adopted on a PLL controller of power line phase tracking. Through the simulation and experimental results, performance of the proposed comb filter has been validated.

• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.7-14
• /
• 2010

Alternative subirrigation way, capillary wick system (CWS) was tested to reduce labor cost, waste water, contamination of ground water, and use of fungicide compared to overhead irrigation system (OIS). CWS helped reduce remarkably the working hours for watering from 4 hours in OSI to just 5 minutes. Labor cost was saved 98% in CWS compared to OIS. By the physical characteristics of various growing media, 1 coconut coir+2 perlite (v/v) mixture was selected because it had an ideal distribution of three phase, e.g. 1 solid: 1 liquid: 2 gas phase. Medium mixture containing scoria had so high bulk and particle density to hurt root. In bark-containing medium, the liquid phase and the percent saturation of liquid phase with time elapsed was lower than that of other mixture. It meant that the mixture contained very low level of water. Application of CWS for cyclamen pot production played an important role in reducing the incident of fusarium wilt symptom from 18% in conventional over watering system to 4%. Cyclamen pot irrigated by capillary wick had shorter petiole and more leaves than those by overhead watering. As a result, this system was highly beneficial to get uniform pot products with high quality. It improved water and nutrient solution efficiency relative to conventional overhead irrigation system (OIS).

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.133-138
• /
• 2000

We have investigated some crystallographic, magnetic, and transport properties of the first colossal magnetoresistive compounds $La_{1-x}Ba_{x}MnO_3(0\leq\chi\leq$1)$(5\;K\leqT\leq360K,-5T\leqH\leq5T$ and resistivity $(100K\leqT\leq350K$measurements. $La_{1-x}Ba_{x}MnO_3$ were found to be ferromagnetic for all x.The $La_{1-x}Ba_{x}MnO_3$were found to be insulating for x< 0.2, metallic for 0.20.5. The magnitude of saturation magnetization (Ms) increased until x=1/8 and had theoretical maximum Ms for 0.13$\sfrac{3}{8}$ and had a constant value of 335~340 K for x>$\sfrac{3}{8}$. For $x\geq0.5$ the $La_{1-x}Ba_{x}MnO_3$ samples showed a percolation-type conduction behavior and enhanced low field magnetoresistance caused by simultaneous occurrence of the chemical/magnetic phase separation.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.4
• /
• pp.52-57
• /
• 2009

The effect of aging treatment on the microstructure and mechanical properties of super duplex stainless steel with W was investigated. The phase was precipitated mainly at the early stage of aging and a lower aging temperature under $750^{\circ}C$, but the phase was formed after long-term aging treatment between $600^{\circ}C$ and $900^{\circ}C$. The volume fraction of the phase increased with aging temperature up to $750^{\circ}C$ and then decreased up to $900^{\circ}C$. With an increase in the aging time, the volume fraction phase at the early stage of aging increased slightly, and then increased rapidly beyond a certain time. The rapid increase in the tensile strength and hardness and decrease in the elongation and impact toughness were measured with aging temperatures up to $750^{\circ}C$. On the other hand, the tensile strength and hardness decreased slightly, and the elongation and Charpy impact toughness were unchanged with aging temperatures over $750^{\circ}C$. The tensile strength and hardness increased rapidly at the early stage of aging, and then increased slowly beyond a certain time. The elongation and Charpy impact toughness decreased rapidly at the early stage of aging, and then remained unchanged beyond a certain time. The phase that formed at the early stage of aging and the lower aging temperature had a considerable effect on the elongation and Charpy impact toughness of the super duplex stainless steel with W.

• Korea-Australia Rheology Journal
• /
• v.21 no.1
• /
• pp.59-69
• /
• 2009

The prediction of pressure drop for a droplet flow in a confined micro channel is presented using FE-FTM (Finite Element - Front Tracking Method). A single droplet is passing through 5:1:5 contraction - straight narrow channel - expansion flow domain. The pressure drop is investigated especially when the droplet flows in the straight narrow channel. We explore the effects of droplet size, capillary number (Ca), viscosity ratio ($\chi$) between droplet and medium, and fluid elasticity represented by the Oldroyd-B constitutive model on the excess pressure drop (${\Delta}p^+$) against single phase flow. The tightly fitted droplets in the narrow channel are mainly considered in the range of $0.001{\leq}Ca{\leq}1$ and $0.01{\leq}{\chi}{\leq}100$. In Newtonian droplet/Newtonian medium, two characteristic features are observed. First, an approximate relation ${\Delta}p^+{\sim}{\chi}$ observed for ${\chi}{\geq}1$. The excess pressure drop necessary for droplet flow is roughly proportional to $\chi$. Second, ${\Delta}p^+$ seems inversely proportional to Ca, which is represented as ${\Delta}p^+{\sim}Ca^m$ with negative m irrespective of $\chi$. In addition, we observe that the film thickness (${\delta}_f$) between droplet interface and channel wall decreases with decreasing Ca, showing ${\delta}_f{\sim}Ca^n$ Can with positive n independent of $\chi$. Consequently, the excess pressure drop (${\Delta}p^+$) is strongly dependent on the film thickness (${\delta}_f$). The droplets larger than the channel width show enhancement of ${\Delta}p^+$, whereas the smaller droplets show no significant change in ${\Delta}p^+$. Also, the droplet deformation in the narrow channel is affected by the flow history of the contraction flow at the entrance region, but rather surprisingly ${\Delta}p^+$ is not affected by this flow history. Instead, ${\Delta}p^+$ is more dependent on ${\delta}_f$ irrespective of the droplet shape. As for the effect of fluid elasticity, an increase in ${\delta}_f$ induced by the normal stress difference in viscoelastic medium results in a drastic reduction of ${\Delta}p^+$.

• Korea-Australia Rheology Journal
• /
• v.18 no.2
• /
• pp.99-102
• /
• 2006

Primitive chain network model for block copolymers is used here to simulate molecular dynamics in the entangled state with acceptable computational cost. It was found that i) the hooking procedure rearranging the topology of the entangled network is critical for the equilibrium structure of the system, and ii) simulations accounting for the different chemistry, i.e., with a biased hooking probability based on interaction parameter ${\chi}$ for selection of the hooked partner, generates a reasonable phase diagram.

• Proceedings of the Korean Statistical Society Conference
• /
• 2002.11a
• /
• pp.79-83
• /
• 2002

A phase III clinical trial of a new drug for neutropenia induced by chemotherapy is presented and consider adding random effects in crossover design which was used in the clinical study. The diagnostics for its heteroscedasticity based on score statistic is derived for detecting homoscedasticity of errors in crossover design. A small simulation study is peformed to investigate the finite sample behaviour of the test statistic which is known to have an asymptotic chi-square distribution under the null hypothesis.

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.66-70
• /
• 1985

This study was to investigate physical properties of the system $Ca(Mg_{1-x}Al_x) (Si_{2-x}Al_x)O_6$ by quenching method. This system $\chi$=0.1 to 0.3 had same crystal phase microstructure and similar properties. Bulk density microhardness thermal expansion coefficient and modulus of rupture of these solid solutions were 2.87~2.95g/cm3 850~900kg/$mm^2$, $7.5~7.8{\times}10^{-6}$/$^{\circ}C$ and 1950~1980kg/$cm^2$ respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.314-316
• /
• 2005

Light flicker is a notorious phenomenon influencing light quality. The flicker of the light flux outputs from the light sources perceived by human eyes depends upon the lamp brightness fluctuations for projector display. This paper describes a ballast ignition control system, which makes the lamp strike frequency phase lock the blanking time period to minimize the flicker effect