• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.426-433
• /
• 2023

The purpose of this study was to investigate the muscle activity of the lower extremity during driver swing in three-foot positions (Feet Open Stance, Feet Straight Stance, Lead Foot Open Stance). The electromyograms of gastrocnemius, tibialis anterior, and vastus lateralis during swing were measured and analyzed in three sections (take away - back swing, back swing - down swing, and down swing - follow swing). There was no significant difference in muscle activity according to foot position. Muscle activity according to phase was significantly higher in right gastrocnemius and tibialis anterior, and the left and right vastus lateralis in down swing - follow swing. In conclusion, the difference in muscle activity according to foot position is insignificant, and it is considered that the muscle activity to maintain the balance of the body increases toward the end of swing.

• 전자공학회논문지
• /
• 제51권7호
• /
• pp.96-102
• /
• 2014

본 논문에서는 dual-rail data encoding방식을 적용하여 비동기식시스템을 설계할 때, 신호천이를 줄이고 소비전력을 줄이기 위하여 4-phase handshaking 프로토콜과 2-phase handshaking 프로토콜을 혼합한 dual-rail data encoding방식을 제안한다. 기존의 dual-rail data encoding 4-phase handshaking 프로토콜은 space state가 존재함으로 말미암아 신호 천이가 많이 발생하게 되고 많은 전력소비를 발생한다. 이론적으로 dual-rail data encoding 2-phase handshaking 프로토콜은 dual-rail data encoding 4-phase handshaking 프로토콜보다 빠르고 신호천이도 적지만 표준 라이브러리를 사용하여 설계할 수 없다. 제안하는 혼합형 dual-rail data encoding 방식의 성능을 평가하기 위하여 Adder블록, Multiplier블록, Latch를 포함한 benchmark회로를 설계를 설계하였다. Benchmark회로를 이용하여 시뮬레이션해본 결과, 제안하는 혼합형 dual-rail data encoding방식은 기존의 dual-rail data encoding 4-phase handshaking 프로토콜에 비해 35%이상 전력소비가 감소되는 결과를 얻었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권4호
• /
• pp.264-269
• /
• 2006

A $0.12GHz{\sim}1.4GHz$ DLL-based clock generator with the capability of multiplied four phase clock generation was designed using a 0.18um CMOS process. An adaptive bandwidth DLL with a regulated supply delay line was used for a multiphase clock generation and a low jitter. An extra phase detector (PD) in a reference DLL solves the problem of the initial VCDL delay and achieves a fast lock time. Twice multiplied four phase clocks were generated at the outputs of four edge combiners, where the timing alignment was achieved using a coarse lock signal and the 10 multiphase clocks with T/8 time difference. Those four clocks were combined one more time using a static XOR circuit. Therefore the four times multiplication was achieved. With a 1.8V supply, the rms jitter of 2.1ps and the peak-to-peak jitter of 14.4ps were measured at 1.25GHz output. The operating range is $0.12GHz{\sim}1.4GHz$. It consumes 57mW and occupies 450*325um2 of die area.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권9호
• /
• pp.389-400
• /
• 2020

A construction project is a designed product made up of labors, materials, and installations in the project positioned on the ground and may include the underground and ground section, and the section in water or on the water surface. It is a civil, industrial, transport, agricultural and rural development, infrastructure, or some other. A key phase in the life cycle of these construction projects is the implementation when building products are made directly with workers, equipment, materials, and managers. If there is a lack of management experience, information, and problem-solving solutions to tackle the risks faced by contractors, especially foreign ones, will fail in controlling the project's cost. This study was conducted with investigations, discussions, and evaluation of the factors that lead to cost overruns in the construction projects of international contractors in Vietnam. The principal component analysis (PCA) showed that those factors that influence cost overruns these construction projects fall into five general groups, including factors related to (i) the owners, (ii) the foreign contractors, (iii) the subcontractors and suppliers, (iv) state management, and (v) the project itself. Besides, the study proposes solutions to limit cost overruns in construction projects and improve the profitability of international contractors in Vietnam.

• Applied Microscopy
• /
• 제33권3호
• /
• pp.195-204
• /
• 2003

Imaging plate에 기록된 전자회절 자료의 면간 거리 분석과 상동정시 나타나는 오차 요인들을 고찰하고 실험적인 보정방법을 도출하였다. 각각의 회절방향에 대한 radial intensity distribution plot과 실험적으로 도출된 면간 거리 보정식에 의해 전자회절 자료의 디지털 이미지에서 면간 거리 측정오차는 약 0.5%로 낮아짐을 알 수 있었다. Al 표준시료를 이용하여 imaging plate에 기록된 전자회절 자료의 면간 거리 편차 경향을 분석한 후 [001] gibbsite 시편에 동일한 실험적 보정을 수행하여 120분간의 전자빔 조사로부터 형성된 여러 전이 상들에 대한 면간 거리 측정 및 상 동정을 보다 정밀히 수행할 수 있었다. 그 결과, gibbsite로부터 형성된 주요 전이상들은 ${\chi}$-알루미나, ${\gamma}$-알루미나, ${\sigma}$-알루미나로 구성됨을 명확하게 동정할 수 있었다.

• Journal of Welding and Joining
• /
• 제28권4호
• /
• pp.18-25
• /
• 2010

Super-duplex stainless steels (SDSS) have a good balance of mechanical property and corrosion resistance when they consist of approximately equal amount of austenite and ferrite. The SDSS needs to avoid the detrimental phases such as sigma(${\sigma}$), chi(${\chi}$), secondary austenite(${\gamma}2$), chromium carbide & nitride and to maintain the ratio of ferrite & austenite phase as well known. However, the effects of the subsequent weld thermal cycle were seldom experimentally studied on the micro-structural variation of weldment & pitting corrosion property. Therefore, the present study investigated the effect of the subsequent thermal cycle on the change of weld microstructure and pitting corrosion property at $40^{\circ}C$. The thermal history of root side was measured experimentally and the change of microstructure of weld root & the weight loss by pitting corrosion test were observed as a function of the thermal cycle of each weld layer. The ferrite contents of root weld were reduced with the subsequent weld thermal cycles. The pitting corrosion was occurred in the weld root region in case of the all pitted specimen & in the middle weld layer in some cases. And the weight loss by pitting corrosion was increased in proportional to the time exposed at high temperature of the root weld and also by the decrease of ferrite content. The subsequent weld thermal cycles destroy the phase balance of ferrite & austenite at the root weld. Conclusively, It is thought that as the more subsequent welds were added, the more the phase balance of ferrite & austenite was deviated from equality, therefore the pitting corrosion property was deteriorated by galvanic effect of the two phases and the increase of 2nd phases & grain boundary energy.

• Journal of the korean society of oceanography
• /
• 제32권1호
• /
• pp.46-55
• /
• 1997

The quantitative determination of carotenoids, chlorophylls and their degradation products from marine phytoplankton was performed by reverse-phase high performance liquid chromatography (HPLC). Separated and quantified chlorophylls and their degraded products are chlorophyll a, b, c, chlorophyllide a, phaeophytin a, b and phaeophorbide a. Concentrations of six carotenoids including fucoxanthin, 19'-butanoyloxyfucoxanthin, 19'-hexanoyloxyfucoxan-thin, prasinoxanthin, alloxanthin, zoaxanthin/lutein were also determined from natural field samples by absorbance. Results of pigment analysis of field samples collected from the southern waters of the East Sea on October 8th, 1996 were reported. Concentration of chi a ranged from 7.2 to 180.4 ng/1. Concentration of chi b and chi c ranged from 22.7 to 53.7 ng/1 and from 3.3 to 58.5 ng/1, respectively. Significant concentrations of phaeophytin a, and chlorophyllide a were also detected at different depths. Fucoxanthin, 19'-hexanoyloxyfucoxanthin and zoaxanthin/lutein were the most abundant carotenoids and 19'-butanoyloxyfucoxanthin, prasinoxanthin and alloxanthin were also detected relatively at low concentrations. These results of pigment analyses suggest predominance of diatom, prymnesiophytes and cyanobacteria and presence of crysophyte, green algae (prasinophyte and prochlorophyte), and cryptophyte in the study area on October 8th, 1996, We report prymnesiophyte for the first time as an important biomass component of marine phytoplankton in the study area. Vertical profiles for the concentration changes of the major pigments were also given.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.548-557
• /
• 2018

In this paper, Asynchronous Self-Power Gating technique (ASPG) is used to reduce consumption power in asynchronous digital watch application. The power gating control signal is automatically generated by internal system operation characteristics instead of using replica circuit delay or four-phase handshaking protocol. Isolation cell is designed to insert it between power gating domain and normal operation domain. By using self-power gating circuit, asynchronous digital watch application consumes very low power and maintains data during sleep mode. The comparison results show the proposed ASPG technique saves leakage power up to 40.47% and delay time is reduced to 71% compared to the conventional circuit.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.75-82
• /
• 2004

In this research, a computer analysis has been developed for predicting the Pipe pressure of the intake and exhaust manifold in a small single cylinder engine. To get the boundary conditions for a numerical analysis one dimensional and unsteady gas dynamic calculation is performed by using the MOC(Method Of Characteristics). The main numerical parameters are engine revolutions. to calculate the Pulsating flow which the intake and exhaust valves are working. The distributions of the exhaust pipe pressures were influenced strongly to the cylinder pressures and the shapes of exhaust pressure variation were similar to the Inside of cylinder pressure As the engine revolutions are increased. the intake pressure was lower than ambient pressure. The amplitude of exhaust pressure had increased and the phase of cylinder pressure $P_c$ is delayed and the amplitude of cylinder pressure were increased.

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.780-787
• /
• 2006

Several types of different header designs are numerically studied to have uniform distribution of two phase flow in the evaporator header having multi-channels. The different geometries include the inlet tube position into the header and the width of header. In the numerical calculation, two types of two-phase model such as homogeneous model and VOF(Volume Of Fluid) model are employed. In this study, the mal-distribution number, $M_d$, is newly defined to evaluate the averaged level of the flow distribution in the whole passes of the evaporator. As results, two phase flow in the header can be visualized using post-processing of numerical results. Furthermore, the optimum position of the inlet tube into the header and the width of header can be proposed for the better distribution of refrigerant(R-134a) flow.