• Interaction and multiscale mechanics
• /
• 제2권3호
• /
• pp.321-332
• /
• 2009

Recent development in composites containing phase-transforming particles, such as vanadium dioxide or barium titanate, reveals the overall stiffness and viscoelastic damping of the composites may be unbounded (Lakes et al. 2001, Jaglinski et al. 2007). Negative stiffness is induced from phase transformation predicted by the Landau phase transformation theory. Although this unbounded phenomenon is theoretically supported with the composite homogenization theory, detailed stress analyses of the composites are still lacking. In this work, we analyze the stress distribution of the Hashin-Shtrikman (HS) composite and its two-dimensional variant, namely a circular inclusion in a square plate, under the assumption that the Young's modulus of the inclusion is negative. Assumption of negative stiffness is a priori in the present analysis. For stress analysis, a closed form solution for the HS model and finite element solutions for the 2D composite are presented. A static loading condition is adopted to estimate the effective modulus of the composites by the ratio of stress to average strain on the loading edges. It is found that the interfacial stresses between the circular inclusion and matrix increase dramatically when the negative stiffness is so tuned that overall stiffness is unbounded. Furthermore, it is found that stress distributions in the inclusion are not uniform, contrary to Eshelby's theorem, which states, for two-phase, infinite composites, the inclusion's stress distribution is uniform when the shape of the inclusion has higher symmetry than an ellipse. The stability of the composites is discussed from the viewpoint of deterioration of perfect interface conditions due to excessive interfacial stresses.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.146-159
• /
• 2015

Since the power capacity needed for the propulsion of large ships is very large, a multiphase AC induction propulsion mode is generally adopted to meet the higher requirements of reliability, redundancy and maintainability. This paper gives a detailed description of the development of a 20MW fifteen-phase PWM driver for advanced fifteen-phase propulsion induction motors with a special third-harmonic injection in terms of the main circuit hardware, control system design, experiments, etc. The adoption of the modular design method for the main circuit hardware design can make the enclosed mechanical structure simple and maintainable. It can also avoid the larger switch stresses caused by the multiple turn on of the IGBTs in conventional large-capacity converter systems. The use of the distributed controller design method based on a high-speed fiber-optic ring net for the control system can overcome such disadvantages as the poor reliability and long maintenance times arising from the conventional centralized controller which is designed according to point-to-point communication. Finally, the performance of the 20MW PWM driver is verified by experimentation on a new fifteen-phase induction propulsion motor.

• 한국광학회지
• /
• 제11권6호
• /
• pp.385-389
• /
• 2000

본 논문에서는 원형 대칭 광 시스템에 대한 초점 심도를 증가시키기 위해 Wigner 분포 함수(WDF)로 유도된 위상 지연 함수를 이용한다. 1차원 신호에 대한 WDF는 위상-공간($\chi,\zeta$)상의 2차원 함수로 표현되고 Strehl 비 (SR)를 이용해 정규화된 복사조도로 나타낸다. 초점 심도의 증가는 WDF 공간상에서 간단한 조작으로 자유공간 전파의 특성을 나타내는 전단 기울기 $\alpha$을 부여함으로서 달성된다. 또한 $\alpha$을 초점 심도의 항 $\delta_z$로 표현함으로서 위상 지연 함수를 통해 정량적으로 초점특성을 평가할 수 있는 방법을 제안한다. 제안된 방법으로 수치 해석한 결과를 다른 접근법으로 수행되었던 연구결과와 비교한다.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.281-286
• /
• 1982

The composition of glasses to be suitable for crystallisation of $BaTiO_3$ by heat-treatment and the dielectric properties of the glass-ceramics were investigated. The composition of the family of glasses was defined by the formula $\chi$ $BaTiO_3 + (100-$\chi$)Al_2O_3$.$2SiO_2$ and excess BaO. Data were presented on dielectric constant and loss tangent at various frequencies. The effects of excess BaO on dielectric properties were investigated. The additions of $Na_2O$ and $Nb_2O_5$ shifted the Curite temperature of these glass-ceramics. The glass composition which was able to be melted at 145$0^{\circ}C$ and moulded as homogeneous glass phase without devitrification should contain $Al_2O_3$.$2SiO_2$ more than 30 mole %. The more the amount of additive BaO increased, the more dielectric constant increased. When the maximum heat-treatment temperature was 105$0^{\circ}C$, we obtained higher dielectric constant than that of 95$0^{\circ}C$. The dielectric constant and the dielectric loss were stable at frequencies between 5$\times$104 and 107 cycle per second. When $Na_2O$ and $Nb_2O_5$ were added, the Curie temperature, presented at 14$0^{\circ}C$ to 15$0^{\circ}C$, shifted to lower temperature. Therefore, the glass-ceramics having high dielectric constant at room temperature were obtained.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.935-941
• /
• 1991

Effects of calcination process and ZrO2 addition on the electrical properties of [(Ba0.82Sr0.08Ca0.1)O]m(Ti1-$\chi$Zr$\chi$)O2 ceramics have been investigated. With the variation of A/B-site ratio m of the dielectric formulations, sintering behavior and the resistivity after sintering in a reducing atmosphere have been affected by the calcination process. When the dielectric formulations of m=1.01 were sintered in a reducing atmosphere, the room-temperature resitivity of 109 {{{{ OMEGA }}.cm was obtained for samples processed with two-step calcination, which was much lower than 1012 {{{{ OMEGA }}.cm of samples calcined once. It was confirmed that high resistivity of Ca-doped BaTiO3 ceramics, after sintering in a reducing atmosphere, is maintained by acceptor-like behavior of CaTi" which is formed by Ca substitution to Ti-site. It was also found out that the critical amount of B-site Ca substitution for reduction inhibition of BaTiO3 is around 0.005 mol. With the increasing amount of ZrO2 addition to dielectric formulations, Curie peak was depressed and Curie temperature was lowered due to the enhanced diffuse phase transition.tion.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권2호
• /
• pp.763-767
• /
• 2014

Aim: To study the contribution of genetic variation in RAD51 to risk of esophageal squamous cell carcinoma (ESCC). Methods: Three single nucleotide polymorphisms (SNPs) in RAD51 (rs1801320, rs4144242 and rs4417527) were genotyped in 316 ESCC patients and 316 healthy controls in Anyang area of China using PCR-RFLP (polymerase chain reaction-restriction fragment length polymorphism). Demographic variables between cases and controls were statistically compared by T test and Chi-square test. Hardy-Weinberg equilibrium was evaluated by the Chi-square test. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated to measure any association with ESCC. Haplotype frequencies were estimated by Phase 2.1. Result: The genotype frequencies of rs1801320, rs4144242 and rs4417527 in patients with ESCC demonstrated no significant differences from those in control group (P>0.05). When the haplotypes of these three SNPs were constructed and their relationships with ESCC risk investigated, however, CGG was observed to increase the risk (P=0.020, OR=2.289). Conclusions: There was no association between the three SNPs of RAD51 and ESCC susceptibility in our Chinese population. However, the CGG haplotype might be a risk factor.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.138-146
• /
• 2015

액체 상태의 물질이 매우 급속하게 냉각되면 일반적으로 과냉각액체(supercooled liquid) 상태에 도달한다. 과냉각액체는 더 낮은 온도에서 유리상(glass phase)으로 상전이를 일으킨다고 알려져 있는데, 이때 나타나는 동역학적 불균일성(dynamic heterogeneity)은 상전이를 기술하는데 중요한 역할을 한다. 그러나 일반적인 액체의 상전이를 연구할 때 주로 사용되던 상관함수(correlation function)으로는 이러한 불균일성을 정량적으로 표현하기 어렵기 때문에 동역학적 민감도(dynamic susceptibility)나 multi-time correlation function 등 동역학적 성질(dynamic property)로부터 특징적인 시간 개념 및 거리 개념을 도출하려는 연구가 많이 진행되어 왔다. 본 논문에서는 일반적으로 특징적인 거리 개념을 도출해 내는데 사용되는 4점 밀도 상관함수(four-point density correlation function)인 dynamic susceptibility(${\chi}^4$)가 입자 밀도의 요동(fluctuation)의 상관관계(correlation)가 지속되는 특징적인 시간 개념에 대한 정보 또한 포함하고 있다는 점에 주목하였다. 이에 따라 ${\chi}^4$의 시간에 대한 적분인 ${\tau}_4$를 새롭게 도입하였으며 그 결과로 ${\tau}_4$는 three-time density correlation function으로부터 도출한 ${\tau}_{Dh}$와 같은 축척(scaling)을 가지는 것을 확인하였다. 과냉각액체에 대한 장난감 모형(toy model)의 일종인 "Lennard-Jones potential 하에서 운동하는 서로 다른 두 종류의 입자들"을 연구에 사용하였다.

• 한국미생물·생명공학회지
• /
• 제18권1호
• /
• pp.56-60
• /
• 1990

Brevibacterium sp. CH1 균주가 흙으로부터 분리하여 아크릴로니트릴을 아크릴아마이드로 생변화를 수행하는데 필요한 효소를 생산하기 위하여 사용하였다. 여러가지 고정화 방법과 효소 안정성이 조사 되었다. Nitrile hydratase는 free cell에 대하여 pH7에서 최대한 안정성을 보여주었다. EDTA와 phenyl menthl fluoride을 protease inhibitor로 선정하여 inhibitor 농도를 변화시키면서 효소의 저장안정성을 평가하였다. 아크릴아마이드가 안정성 및 물리화학적 강도를 고려 할 때 가장 좋은 carrier였다. 고정화 세포의 저장안정성은 4$^{\circ}C$에서 gel상의 아크릴아마이드 농도가 증가함에 따라 감소하였고, 25% 이상의 아크릴아마이드 농도에서 안정성이 매우 낮았다.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.455-459
• /
• 2003

LPE(Liquid Phase Epitaxial)법을 이용하여 성장시킨 B $i_2$S $r_2$Ca(C $u_{1-x}$ N $i_{x}$ )$_2$ $O_{8+}$$\delta$/ 막(film)을 break junction 법을 이용하여 터널링 분광을 측정하였다. Ni 조성비 $\chi$$_{L}$의 증가에 따라 에너지 간격 2$\Delta$의 크기는 증가하였다. 에너지 간격 2$\Delta$(4.2 K)는 54.4~64 meV, 2$\Delta$/ $k_{B}$ $T_{c}$ $^{zero}$는 7.36~10.14로 BCS 이론에 의한 값 보다 큰 결과를 얻었다. 융액(melting solution) 속의 Ni 조성비 $\chi$$_{L}$의 증가에 따라, 임계온도 $T_{c}$ $^{zero}$와 격자상수 c-축의 길이는 감소하는 경향을 보였다.을 보였다.$^{zero}$와 격자상수 c-축의 길이는 감소하는 경향을 보였다.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.435-441
• /
• 2010

To verify the possibility of a power generation system using biogas from the waste of pig farm for rural electric production, a SI gasoline engine is modified to use biogas fuel and was installed in a 20 KVA power generation system. An electronic speed regulation unit is developed to keep the system speed at 1500 rpm. Experimental investigations have been carried out to examine the performance characteristics of power generation system (such as: system frequency, phase output voltage,$\ldots$). In addition, the operating parameters and output emissions ($NO_x$, HC, and $CO_2$) of biogas-fueled engine are preliminary evaluated and analyzed for the change of system load. Results indicated that the researched power generation system shows a high stability of output voltage and frequency with help of speed regulator. Biogas fuel (mainly $CH_4$ and $CO_2$) has an environmental impact and potential as a green alternative fuel for SI engine and they would not require significant modification of existing engine hardware. Output emissions of biogas-fueled engine are found to be relative low. $NO_x$ emission increases with the increase of output electric power of the power generation system.