• Korean Journal of Veterinary Service
• /
• v.22 no.1
• /
• pp.15-23
• /
• 1999

A multiresidue, simple and rapid isolation technique known as matrix-solid phase dispersoin (MSPD) for the extraction and quantitative gas chromatographic/electron capture detection (GC/ECD) determination of 14 organochlorinated pesticides($\alpha$-BHC, ($\beta$-BHC, ($\gamma$-BHC, aldrin, dieldrin, endrin, heptachlor, ($\alpha$-endosulfan, ($\beta$-endosulfan, endosulfan sulfate, p,p'-DDE, o,p'-DDD, p,p'-DDD, p,p'-DDT) from meat fats. The 14 pesticide were fortified into meat fat(0.5g) and blend with 2g $C_{18}$, $C_{18}$meat fat matrix blend and 2g activated florisil comprise an extraction column from which the pesticides are eluted by adding 8ml acetonitrile. Then 2${\mu}\ell$ of the eluate is analyzed by GC/ECD. Unfortified blank controls are tested similarly. The eluate contained all the pesticide analytes and was free of interfering coextractants. Recovery rate(31.3-500ng/g) were ranged from 80$\pm$4% to 97$\pm$4%. Any organochlorinated pesticides were not detected in 120 samples of beef and pork collected from slaughter houses in Kyeonggi province.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.589-589
• /
• 2012

Indium sulfide thin films have been grown onto glass substrates using radio frequency magnetron sputtering at room temperature. The as-deposited film were annealed in nitrogen atmosphere at different temperatures of 100, 200, 300, 400 and $500^{\circ}C$ with an 1 h annealing time. The effect of annealing temperature on composition, structure, morphology and optical properties of the as-grown In2S3 films has been studied. The XRD results indicate that the as-deposited films are composed by a mixture of both cubic ${\alpha}$ and ${\beta}$ crystalline phases, with some fraction of tetragonal phase. The thermal annealing on the films produces the conversion of the cubic crystalline phases to the tetragonal ${\beta}$ one and a crystalline reorientation of the latter phase. The surface morphological analysis reveals that the films grown at $300^{\circ}C$ have an average grain size of ~ 58 nm. These films show a S/In ratio of 0.99. The optical band gap is found to be direct and the films grown at $300^{\circ}C$ shows a higher optical transmittance of 80% and an energy band gap of 2.52 eV.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.190-195
• /
• 2002

We analysed mutation of ${\beta}_2$-adrenergic receptor gene that controls bronchial asthma by denaturing high performance liquid chromatography (DHPLC) according to ion-pair reversed-phase high performance liquid chromatography (IP-RP-HPLC). We extracted genomic DNA from 50 asthma patients, amplified DNA using PCR, and analysed PCR product by DHPLC. As a result, we obtained that mutation frequency was 15 (30%) among 50 cases. Consequently DHPLC mutation detection was confirmed that the result of direct sequencing was coincide exactly.

• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.437-442
• /
• 2010

Sodium hydrogen sulphate ($NaHSO_4$), n-tetra butyl ammonium bromide (TBAB) as a phase transfer catalyst (PTC) in water, and 1-butyl-3-methyl imidazolium hydrogen sulphate [bmim]$HSO_4$ as ionic liquid (IL) has been used as a mild reaction promoter for the cyclocondensation of formalin, ${\beta}$-naphthol and aromatic amines to afford respective 2,3-dihydro-2-phenyl-1H-naphtho-[1,2-e] [1,3] oxazine derivatives. The present protocols are greener, high yielding and involved the nonchromatographic isolation procedure.

• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.192-195
• /
• 2011

The phase transition of vortex matter from solid to liquid was studied in iron-based superconductors. Based on the traditional vortex glass theory, we have examined the magnetoresistivity data of iron-based superconductors using our extended thermal activation model: $\rho(B,T)=\rho((T-T_g(B))/(T_c(0)-T_g(B)))^{v(z-1)}$. We predict that the magnetic field-dependent area S + $S_0$ which integrates $\rho$ with T is proportional to $B^{\beta}$, where ${\beta}$ is the vortex glass transition exponent. From our calculation, the vortex glass transition exponent is 0.33, close to the exponent of area $S_0$ + S is 0.31 in $SmO_{0.9}F_{0.1}FeAs$; the exponent of area S is 0.63, which is close to the irreversibility line exponent 2/3. Both of the results show the validity of our model. In addition, our model is shown to be effective in describing irreversibility behavior in layered superconductors.

• Journal of Applied Biological Chemistry
• /
• v.43 no.3
• /
• pp.176-179
• /
• 2000

Nonpolar taxoides extracted from a large-scale cell culture of Taxus chinensis were isolated through the normal and reverse phase column chromatographies, and their compounds were identified via NMR spectroscopy. The complete separation method was systematically established and described. In dichloromethane, dissolved paclitaxel and other taxoids with hexane were precipitated during the purification of paclitaxel from the plant cell culture of T. chinensis through a large-scale process while the relatively nonpolar taxane derivatives remained dissolved in the hexane phase. 13-Deoxy baccatin III (I), baccatin VI (II), taxchinin I (III), $2{\alpha}$, $5{\alpha}$, $10{\beta}$, $14{\beta}$-tetraacetoxy-4(20), 11-taxadiene(IV), 1-deoxy baccatinVI(V), and taxayuntin C (VI) were isolated through column chromatography and identified via NMR spectroscopy. Compounds I and IV were found to the major components, aside from paclitaxel, in the plant cell culture of T. chinensis. The concentrations of I and IV were compared with the that concentration of the paclitaxel in each of plant cell culture. The possible applications of compounds I, II, IV, and V were discussed.

• Journal of the Korean Ceramic Society
• /
• v.20 no.4
• /
• pp.305-314
• /
• 1983

In order to enhance the rate of th nitridation and to give the high density of reaction-bonded silicon nitride MgO powder as nitriding aid were added to silicon powders and the mixture was pressed isostatically into compacts which were nitrided in the furnace of 1, 35$0^{\circ}C$ where 95% $N_2$-5% $H_2$ gases were flowing. As the other nitriding aid $Mg(NO_3)_2 6H_2O$ was selected, A slip made of magnesium nitrate solution and fine silicon particles was spray-dried and then decomposed at 30$0^{\circ}C$. Magnesium oxide-coated silicon powders were formed into compacts prior to the nitridation on the same condition as the former. Magnesium nitrate (MgO, produced from the decomposition of magnesium nitrate) was more effective for the formation of the $\beta$-phase in the initial stage of the nitridation probably due to the easy formation of $MgO-SiO_2$-metal oxide eutectic melt. It has been confirmed that forsterite was formed as a result of the reaction between MgO and $SiO_2$ film of silicon surface. It was considered that MgO produced from magnesium nitrate may be finer more reactive and more uniformly distributed on the surface of silicon particles than original MgO. The higher the forming pressure was the more the $\beta$-phase was formed.

• Journal of the Korean Ceramic Society
• /
• v.46 no.5
• /
• pp.452-455
• /
• 2009

A cost-effective route to synthesize $\beta$-SiAlONs from Si mixtures by reaction bonding followed by post-sintering was investigated. Three different z values, 0.45, 0.92 and 1.87, in $Si_{6-z}Al_zO_zN_{8-z}$ without excess liquid phase were selected to elucidate the mechanism of SiAlON formation and densification. For RBSN (reaction-bonded silicon nitride) specimens prior to post-sintering, nitridation rates of more than 90% were achieved by multistep heating to $1400^{\circ}C$ in flowing 5%$H_2$/95%$N_2$; residual Si was not detected by XRD analysis. An increase in density was acquired with increasing z values in post-sintered specimens, and this tendency was explained by the presence of higher amounts of transient liquid phase at larger z values. Measured z values from the synthesized $\beta$-SiAlONs were similar to the values calculated for the starting compositions. Slight deviations in z values between measurements and calculations were rationalized by a reasonable application of the characteristics of the nitriding and post-sintering processes.

• Korean Journal of Materials Research
• /
• v.14 no.5
• /
• pp.358-362
• /
• 2004

$Si_3$$N_4$ ceramics have been identified as one of the promising structural ceramics. This study has been carried out to investigate of the synthetic behaviors of $Si_3$$N_4$ derived from domestic silica-stone by direct nitriding method. The silicon nitridation reaction has been studied in the temperature range of $1300～1550^{\circ}C$. Below the $1400^{\circ}C$, the nitriding rate was measured to be 16%. For the temperatures higher than the $1400^{\circ}C$, $\beta$-$Si_3$$N_4$ phase was formed mainly, and the nitriding rate showed above 98%. With the increasing of sample weight of silicon powder, the nitriding rate and $\beta$-$Si_3$$N_4$ phase increased at $1400^{\circ}C$ for 2 hours. The shape and particle size of$ Si_3$$N_4$ powder synthesized at $1400^{\circ}C$ for 2 hours showed the irregular angular-type and 10 $\mu\textrm{m}$, respectively.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.869-871
• /
• 2004

This paper presents Single Phase Switched Reluctance Motor Optimum Design using Response Surface Methodology and 2-D Finite Element Method that is coupled with the circuit equation of the rectifier and converter. Moreover, A design process for SPSRM has been proposed. The optimum process has been performed with geometric parameters (${\beta_s}\;&\;{\beta_r}$) that influence the inductance variation for design variables. In this paper, SPSRM performances have been analyzed according to variations of electric and geometric parameters after determining design models in terms of efficiency and power factor maximization.