• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.18-26
• /
• 1997

소결조제로 Y 3Alo012를 첨가한 {3- SiC 분말에 seed로서 1 wt%의 a- SiC 분말을 첨 가한 시편과 첨가하지 않은 시편을 1950$^{\circ}$C, argon 분위기에서 0.5~4시간 동안 소결하였다. S Seed로써 1 wt% a-SiC 분말의 첨가는 소결 도중에 길게 자란 업자틀의 성장을 가속시켰고, a a- SiC seed를 첨가한 시편에서 더 조대한 미세구조가 얻어졌다 .. a-SiC seed를 첨가하여 4시간 동안 소결한 시편의 파괴인성은 7.5 MPa'ml/2이었고, seed를 첨가하지 않은 시편의 파괴인성은 6 6.1 MPa'm1/2이었다 .. Seed를 첨가한 시편의 높은 파괴인성은 조대한 미세구조에 포함된 길게 자란 입자들에 의한 균열가교 기구의 활발한 작용에 기인한다.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.804-810
• /
• 2003

건설폐기물 중 폐콘크리트를 40$0^{\circ}C$로 가열한 후 ball mill로 분쇄하여 재생골재를 생산할 때 발생된 미분말을 보통 포틀랜드 시멘트의 SiO$_2$, CaO, A1$_2$O$_3$원에 대한 대체원료물질로서 활용하고자 하였다. 클링커를 제조하기 위한 주원료는 석회석, shale, 전로슬래그, fly ash를 이용하였고, modulus는 LSF:91.0, SM:2.60, IM:1.60로 고정한 후 shale에 대해 미분말을 25, 50, 15, 100%까지 치환하여 클링커를 제조하였다. 클링커의 주요생성광물은 1,45$0^{\circ}C$에서 OPC와 같은 광물상인 $C_3$S, $\beta$-C$_2$S, $C_3$A, $C_4$AF 상으로 나타났다. 조합원료의 반응성을 비교하기 위해 시차열분석을 실시하고, 소성성지수를 구한 결과, 클링커의 광물상 생성온도는 plain과 유사했으며, 소성성지수는 48.6-51.4 정도로 나타났다.

• 자원환경지질
• /
• 제30권4호
• /
• pp.279-289
• /
• 1997

Dark to pale green-colored, Cr-bearing sericites from hydrothermal alteration zone of the Narim gold deposit were investigated mineralogically and geochemically. The alteration zone is composed mineralogically of quartz, carbonate minerals and green sericite with minor amounts of chlorite, barite and sulfide minerals (pyrite, sphalerite, galena). The zone is enriched in As (967 to 1520 ppm), Cu (31 to 289 ppm), Ni (1027 to 1205 ppm), Pb (0.20 to 1.24 wt.%) and Zn (1.03 to 1.07 wt. %) compared with fresh rocks such as granitic gneiss, porphyritic biotite granite and basic dyke. The Cr, probably the chromophore element, is highly enriched in the alteration zone (1140 to 1500 ppm), host granitic gneiss (1200 ppm) and porphyritic biotite granite (1200 ppm). Occurrence and grain size of sericite are diverse, but most of the Cr-bearing sericites (150 to $200{\mu}m$ long and 20 to $30{\mu}m$ wide) occur along the boundaries between ore veins and host rocks (especially basic dyke and granitic gneiss). X-ray diffraction data of the sericite show its monoclinic form with unit-cell parameters of $a=5.202{\AA}$, $b=8.994{\AA}$, $c=20.103{\AA}$, ${\beta}=95.746^{\circ}$ and $V=935.83{\AA}^3$, which are similar with the normal 2M1-type muscovite. Representative chemical formula of the sericite is ($K_{1.54}Ca_{0.03}Na_{0.01}$)($Al_{3.42}Mg_{0.38}Cr_{0.14}Fe_{0.06}V_{0.02}$)($Si_{6.69}Al_{1.31}$)$O_{20}(OH)_4$. The Cr content increases with decrease of the octahedral Al content, and ranges from 0.36 to 2.58 wt.%. DTA and TG curves of the sericite show endothermic peaks at $342^{\circ}$ to $510^{\circ}$, $716^{\circ}$ to $853^{\circ}$ and $1021^{\circ}C$, which are due to the expulsion of hydroxyl group. The total weight loss by heating is measured to be about 8.8 wt. %, especially at $730^{\circ}C$. Infrared absorption experiments of the sericite show broad absorption band due to the O-H bond stretching vibration near the $3625cm^{-1}$, coupled with the 825 and $750cm^{-1}$ doublet. The vibration bands related with the H-O-Al and Si-O-Al bonds occur at $1030cm^{-1}$ and 500 to $700cm^{-1}$, respectively. Based on paragonite content of the sericite, the formation temperature of the Narim gold deposit is calculated to be $220{\pm}10^{\circ}C$.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.335-341
• /
• 2011

Continuous SiC fiber-reinforced SiC-matrix composites ($SiC_f$/SiC) had been fabricated by electrophoretic infiltration combined with ultrasonication. Nano-sized ${\beta}$-SiC added with 12 wt% of $Al_2O_3-Y_2O_3$ additive and Tyranno$^{TM}$-SA3 fabric were used as a matrix phase and fiber reinforcement, respectively. After hot pressing at 5 different conditions, the density, microstructure and mechanical properties of $SiC_f$/SiC were characterized. Hot pressing at relatively severe conditions, such as $1750^{\circ}C$ for 1 and 2 h, resulted in a brittle fracture behavior due to the strong fiber-matrix interface in spite of their high flexural strength. On the other hand, toughened $SiC_f$/SiC composite could be achieved by hot pressing at milder condition because of the formation of weak interface in spite of the decreased flexural strength. These results proposed the importance of weak fiber-matrix interface in the fabrication of ductile $SiC_f$/SiC composite.

• 구강생물연구
• /
• 제42권4호
• /
• pp.187-197
• /
• 2018

Chemical agents such as minocycline (MC) and citric acid (CA) were suggested in the treatment of contaminated implant surface. In this study, MC-HCl treatment was performed to enhance surface characteristics of titanium alloy surface. The purpose of this study was to assess the characteristics and the biocompatibility of Ti-6Al-4V surface treated by MC. Alpha-beta titanium alloy (Ti-6Al-4V) samples were prepared and they were divided into 6 groups according to chemical concentration and treatment time. These groups include 1) group I, non-treated smooth titanium alloy; 2) group II, MC 1.5 mg/mL for 1 hour; 3) group III, MC 1.5 mg/mL for 24 hours; 4) group IV, MC 15 mg/mL for 10 minutes; 5) group V, MC 100 mg/mL for 5 minutes; 6) group VI, pH1 CA for 3 minutes. The analysis of the surface characteristics of MC-treated titanium alloy was executed using scanning electron microscopy, roughness test, and X-ray photoelectron spectroscopy (XPS). Cell adhesion and MTT assay was done using MC3T3 cell. Titanium surfaces treated with MC indicated a more smoothened surface microstructure. For group II and III, the new peaks of rutile TiO2 were found. Group II and V have more basic group of Ti-OH form in XPS. In MTT assay, all MC-treated groups showed significantly higher cell viability compared to control. The surface roughness, crystal structure, surface hydrophilicity, cell viability of smooth titanium surface was improved by MC treatment. Compared with the control experiment and CA-treated group, smooth titanium surface treated with MC showed improved surface characteristics and cell biocompatibility.

• 한국광물학회지
• /
• 제11권1호
• /
• pp.1-12
• /
• 1998

In Pohang area, basaluminite accompanying a little amounts of hydrobasalumnite, super-genetically occurs as whitish cryptocrystalline (2-4 $\mu\textrm{m}$) clay-like aggregates in the vicinity of altered carbonate concretions embedded within mudstones of the Tertiary Yeonil Group. A hydrobasaluminite changed readily into a basaluminite at room temperature in air, and, in turn, into a metabasaluminite when heating to 150$^{\circ}$~30$0^{\circ}C$. For the basaluminite, a monoclinic unit-cellparameters (a=14.845$\AA$, b=10.006$\AA$, c=11.082$\AA$, $\beta$=122.15$^{\circ}$) were calculated by X-ray powder diffraction data. Its basal reflections (001 and 002) are XRD analyses strongly indicate that the aluminum sulphate mineral has a layer structure and, at least, three types of water, i.e., (1) interlayer water (9.0 wt %), (2) crystal water (8.0 wt %), and (3) structural water (19.0 wt %). may present in its lattice. Based on TG-DTG data combined with EDS and IR analyses, a new chemical formula of Al5SO4(OH)134H2O was given to the basaluminite. Field occurrence and stable isotope data ($\delta$18O, $\delta$D, $\delta$34S) for the basaluminite seem to reflect that it was formed by the leached meteoric solution from surrounding mudstones during or after uplifting. An interaction of the acid solution with carbonate concretion and the resultant local neutralization of the fluid rich in Al3+ and SO42- are major controls on the basaluminite formation.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권6호
• /
• pp.35-42
• /
• 2006

본 연구는 시멘트/Fe(II) 시스템에서 TCE의 환원성 탈염소화에 관여하는 유효반응성분을 규명하기 위하여 수행되었다. 먼저 시멘트 자체에 존재하거나 혹은 그 수화물에 존재하는 성분을 다량 함유하고 있는 hematite(${\alpha}-Fe_2O_3$), lepidocrocite(${\gamma}$-FeOOH), akaganeite(${\beta}$-FeOOH), ettringite($Ca_6Al_2(SO_4)_3(OH)_{12}$)를 대상으로 TCE 분해실험을 수행하여 이러한 물질이 시멘트/Fe(II) 시스템에서 탈염소반응에 관여할 수 있는지 고찰한 결과, hematite가 잠재적 유효반응성분으로 선정되었다. 각 시스템의 반응속도상수를 비교해 본 결과 200 mM Fe(II)에 hematite와 CaO를 1 : 4(몰비)로 주입한 시스템($k\;=\;0.637\;day^{-1}$)이 기존의 cement와 Fe(II)을 이용한 경우($k\;=\;0.645\;day^{-1}$)와 가장 비슷한 동력학적 분해경향을 보인다는 것을 알 수 있었다. 처음에 pH 조절이 주목적으로 주입되었던 CaO 역시 분해반응에서 중요한 역할을 담당하는 것으로 나타났는데, CaO 첨가량이 증가할수록 hematite/CaO/Fe(II) 시스템의 분해능은 증가하다가 CaO 양이 일정 수준에 다다르면 증가세가 둔화되는 경향을 보여 주었다. SEM(Scanning Electron Microscopy) 분석을 통해서는 hematite/CaO/Fe(II) 시스템 내에서 분해능이 커질수록 육각형 판상의 결정이 새롭게 형성된다는 것을 확인 할 수 있었으며 이 결정은 portlandite, green rust($SO_4$), Friedel's salt 등일 가능성이 높은 것으로 판단되었다. 그리고 동일 시료의 XRD(X-Ray Diffraction) 분석을 통해서는 hematite, magnetite/maghemite, green rust($SO_4$)의 존재를 확인할 수 있었다. SEM 및 XRD 분석에서 공통적으로 나타나는 green rust($SO_4$)가 유효반응성분일 가능성이 높다고 판단되었다.

• Applied Biological Chemistry
• /
• 제51권3호
• /
• pp.223-227
• /
• 2008

사자발쑥의 지상부를 80% MeOH용액으로 추출하고, 얻어진 추출물을 EtOAc, H-BuOH 및 $H_2O$로 용매 분획 하였다. 이 중 EtOAc 분획으로부터 silica gel과 octadecyl silica gel(ODS), Sephadex LH-20 column chromatography로 정제하여 4종의 triterpenoid를 분리하였다. 각 화합물의 화학구조는 NMR, MS 및 IR 등의 스펙트럼 데이터를 해석하여 wrightial(1), wrightial acetate(2), 27-norcycloart-20(21)-ene-25-al-3${\beta}$-ol acetate(3) 및 ursolic acid(4)로 동정하였다. 이 화합물들은 사자발쑥에서 처음으로 분리 보고 되었으며 특히, 화합물 3은 천연에서 처음으로 분리 보고 되었다. 또한 이번에 분리한 화합물에 대하여 항고지혈증 활성을 측정한 결과 화합물 1은 ACAT1과 ACAT2 효소에 대한 $IC_{50}$ 값이 33 ${\mu}g/ml$와 45 ${\mu}g/ml$로 나타났고, 화합물 2는 ACAT1 효소에 대하여 $IC_{50}$ 값이 12 ${\mu}g/ml$로 나타났다. 화합물 3은 ACATI 효소에 대하여 $IC_{50}$값이 16 ${\mu}g/ml$으로 나타났다.

• 한국재료학회지
• /
• 제20권8호
• /
• pp.444-449
• /
• 2010

Transparent ceramics are used in new technology because of their excellent mechanical properties over glasses. Transparent ceramics are nowadays widely used in armor, laser windows, and in high temperature applications. Silicon nitride ceramics have excellent mechanical properties and if transparent silicon nitride is fabricated, it can be widely used. h-BN has a lubricating property and is ductile. Therefore, adding h-BN to silicon nitride ceramics gives a lubricating property and is also machinable. Translucent silicon nitride was fabricated by hot-press sintering (HPS) and 57% transmittance was observed in the near infrared region. A higher wt. % of h-BN in silicon nitride ceramics does not favor transparency. The optical, mechanical, and tribological properties of BN dispersed polycrystalline $Si_3N_4$ ceramics were affected by the density, ${\alpha}:{\beta}$-phase ratio, and content of h-BN in sintered ceramics. The hot pressed samples were prepared from the mixture of $\alpha-Si_3N_4$, AlN, MgO, and h-BN at $1850^{\circ}C$. The composite contained from 0.25 to 2 wt. % BN powder with sintering aids (9% AlN + 3% MgO). A maximum transmittance of 57% was achieved for the 0.25 wt. % BN doped $Si_3N_4$ ceramics. Fracture toughness increased and wear volume and the friction coefficient decreased with an increase in BN content. The properties such as transmittance, density, hardness, and flexural strength decreased with an increase in content of h-BN in silicon nitride ceramics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1303-1304
• /
• 2007

The composites were fabricated, respectively, using 61[vol.%]SiC-39[vol.%]$TiB_2$ and using 61[vol.%]SiC-39[vol.%]$ZrB_2$ powders with the liquid forming additives of 12[wt%] $Al_{2}O_{3}+Y_{2}O_{3}$ by hot pressing annealing at $1650[^{\circ}C]$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, $ZrB_2$ were not observed in this microstructure. ${\beta}{\rightarrow}{\alpha}$-SiC phase transformation was occurred on the SiC-$TiB_2$ and SiC-$ZrB_2$ composite. The relative density, the flexural strength and Young's modulus showed the highest value of 98.57[%], 226.06[Mpa] and 86.38[Gpa] in SiC-$ZrB_2$ composite at room temperature respectively. The electrical resistivity showed the lowest value of $7.96{\times}10^{-4}[{\Omega}{\cdot}cm]$ for SiC-$ZrB_2$ composite at $25[^{\circ}C]$. The electrical resistivity of the SiC-$TiB_2$ and SiC-$ZrB_2$ composite was all positive temperature coefficient resistance (PTCR) in the temperature ranges from $25[^{\circ}C]$ to $700[^{\circ}C]$. The resistance temperature coefficient of composite showed the value of $6.88{\times}10^{-3}/[^{\circ}C]$ and $3.57{\times}10^{-3}/[^{\circ}C]$ for SiC-$ZrB_2$ and SiC-$TiB_2$ composite in the temperature ranges from $25[^{\circ}C]$ to $700[^{\circ}C]$.