• 공업화학
• /
• 제3권1호
• /
• pp.53-63
• /
• 1992

프로필렌을 선택산화시켜 아크로레인을 제조하는 반응을 Bi-molybdate 촉매상에서 고정층 반응기를 사용하여 연구하였다. ${\alpha}-Bi_2Mo_3O_{12}$위에 $MoO_3$를 담지시킨 M/BM-series 촉매는 함침법으로 제조되었고, 역으로 BM/M-series 촉매는 $MoO_3$위에 ${\alpha}-Bi_2Mo_3O_{12}$을 침전시켜 제조하였다. 또한 촉매의 특성분석을 위하여 질소흡착과 XRD, SEM을 이용하였다. M/BM-series 촉매에서는 $MoO_3$가 작은 입자로 분산되고 ${\alpha}-Bi_2Mo_3O_{12}$의 결정구조는 $MoO_3$상이 추가되어도 그 형상이 변하지 않는 채로 유지되었으나, BM/M-series 촉매의 표면형상 및 전체 구조는 촉매제조 중에 생기는 침전물인 $Bi(OH)_3$가 소성 도중 $MoO_3$와 반응하여 ${\alpha}-Bi_2Mo_3O_{12}$을 형성하는 관계로 그 조성에 따라 매우 불규칙적으로 변화하였다. 반응실험 결과, 두 종류의 촉매 모두에서 excess $MoO_3$가 포함되었을 때 활성이 크게 증가하였는데, 이는 선별산화반응이 주로 ${\alpha}-Bi_2Mo_3O_{12}$에서 일어나고 $MoO_3$는 ${\alpha}-Bi_2Mo_3O_{12}$에 산소 공급을 원활히 하여 활성을 증가시키기 때문으로 판명되었다. 또한 이러한 활성 증가는 ${\alpha}-Bi_2Mo_3O_{12}$와 기계적 혼합물 (mechanical mixture)에서도 관찰되었다.

• Environmental Engineering Research
• /
• 제12권2호
• /
• pp.72-80
• /
• 2007

Experiments were conducted to identify the emissions from the car air freshener and to identify the formation of ultra-fine particles and secondary gaseous compounds during the ozone-initiated oxidations with emitted VOCs. The identified primary constituents emitted from the car air freshener in this study were $\alpha$-pinene, $\beta$-pinene, $\rho$-cymene and limonene. Formation of ultra-fine particles (4.4-160 nm) was observed when ozone was injected into the chamber containing emitted monoterpenes from the air freshener. Particle number concentrations, particle mass concentrations, and surface concentrations were measured in time dependent experiments to describe the particle formation and growth within the chamber. The irritating secondary gaseous products formed during the ozone-initiated reactions include formaldehyde, acetaldehyde, acrolein, acetone, and propionaldehyde. Ozone concentration (50 and 100 ppb) and temperature (30 and $40^{\circ}C$) significantly affect the formation of particles and gaseous products during the ozone-initiated reactions. The results obtained in this study provided an insight on the potential exposure of particles and irritating secondary products formed during the ozone-initiated reaction to passengers in confined spaces.

• 한국자기학회지
• /
• 제17권2호
• /
• pp.76-80
• /
• 2007

화학기상응축공정법으로 세 가지 분해온도에서 제조된 나노 Fe-N 시료들을 뫼스바우어 분광기, XRD와 BET를 이용하여 자기적 특성의 변화를 연구하였다. 분해온도가 낮을수록 ${\gamma}'-Fe_4N$의 형성이 용이하였으며, 중간온도에서의 ${\epsilon}-Fe_{2.12}N$을 거쳐 높은 분해온도에서는 ${\gamma}-Fe$가 주로 형성되었다. 높은 분해온도에서는 Fe와 N이 서로 잘 결합되지 못하였는데, 이는 Fe와 N을 결합시키기 위해서는 분해온도를 낮게 하는 것이 바람직하다는 것을 의미한다.

• 한국세라믹학회지
• /
• 제25권4호
• /
• pp.397-407
• /
• 1988

Spinel, mullite and cordierite powders have synthesized from Mg(NO3)2.6H2O, Al(NO3).9H2O and SiCl4 solution by spray pyrolysis method. The two-fluid nozzle was used as an atomizer. The powders of sinel and mullite were synthesized above 80$0^{\circ}C$, but the cordierite composition was noncrystalline for all synthersizing temperature. Those noncrystalline powders were crystallized to $\alpha$-cordierite during calcining at 130$0^{\circ}C$ for 2hrs. The synthesized spinel, mullite and cordierite powders seem to be consisted of agglomerated hollow spherical particles. For all powders, the particle size ranged from submicron to about 3${\mu}{\textrm}{m}$ and mean particle size was about 1.4${\mu}{\textrm}{m}$ in diameter. The specific surface area values of spinel, mullite and cordierite powders were maximum for powders prepared at 100$0^{\circ}C$, and those were 45.9, 25.8 and 13.6$m^2$/gr, respectively.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• 천문학회보
• /
• 제39권2호
• /
• pp.42.1-42.1
• /
• 2014

Neutrino science has received a boost of attention quite recently in cosmology, since the outstanding discovery in particle physics over the last decade that neutrinos are massive: pinpointing the neutrino masses is one of the greatest challenges in science today, at the cross-road between particle-physics, astrophysics, and cosmology. Cosmology offers a unique 'laboratory' with the best sensitivity to the neutrino mass, as primordial massive neutrinos comprise a small portion of the dark matter and are known to significantly alter structure formation. I will first introduce a new suite of state-of-the-art hydrodynamical simulations with cold dark matter, baryons and massive neutrinos, specifically targeted for modeling the low-density regions of the intergalactic medium as probed by the Lyman-Alpha forest at high-redshift. I will then present and discuss how these simulations are used to constrain the parameters of the LCDM cosmological model in presence of massive neutrinos, in combination with BOSS data and other cosmological probes, leading to the strongest bound to date on the total neutrino mass.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1378-1386
• /
• 1994

The characteristic of calcined BaTiO3 powder and sintered PTC ceramics was investigated varing with calcination temperature and time of BaTiO(C2O4)2.4H2O synthesized from BaCl2.2H2O, TiCl4, oxalic acid and ethanol by oxalic acid method. When the particle size was less than 0.1 ${\mu}{\textrm}{m}$ by controlling calcination temperature and time, the resistance at room temperature was measured very high (above M{{{{ OMEGA }}). However, when the calcined particle sizes ranged from 0.2 to 0.3 ${\mu}{\textrm}{m}$, the resistance was 100 {{{{ OMEGA }} (After sintering, the grain size was 10~30 ${\mu}{\textrm}{m}$ homogeneously with the addition of dopant in sintering, the resistivity, resistance, $\alpha$ value and jumped to were 110{{{{ OMEGA }}.cm, 24$^{\circ}C$/% and 106{{{{ OMEGA }}, respectively.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.482-483
• /
• 2006

Synthesis of iron nanopowder by room-temperature electrochemical reduction process of ${\alpha}-Fe_2O_3$ nanopowder was investigated in terms of phase evolution and microstructure. As process variables, reduction time and applied voltage were changed in the range of $1{\sim}20$ h and $30{\sim}40$ V, respectively. From XRD analyses, it was found that volume of Fe phase increased with increasing reduction time and applied voltage, respectively. The crystallite size of Fe phase in all powder samples was less than 30 nm, implying that particle growth was inhibited by the reaction at room temperature. Based on the distinct equilibrium shape of crystalline particle, phase composition of nanoparticles was identified by TEM observation.

• Journal of Pharmaceutical Investigation
• /
• 제4권4호
• /
• pp.26-37
• /
• 1974

Having measured physical canstant and dissolution rate of prednisolone powder, and tablets, also particle size, particle number of powder disintegration, hardness, friability of prednisolone tablets and having also compared it's interrelationship. We obtained the results as following. 1) Dissolution rate of prednisolone powder was determinded cube root rule and: the slope $({\alpha})$ was $3.1915{\times}10^{-2}$. 2) The tablet used in this study was fourteen kind of prednisolone tablets, two kinds of which were not conformity with prednisolone dissolution rate test of U.S.P. XVIII, but the rest of them were conformity with the same test (t60% was 4.3minute in average) 3) There was no significant interrelationship between disintegration, hardness, friability and dissolution rate of prednisolone tablet used in this study but we recognized the disintegration time was greatly influenced by the dissolution rate.

• 자원리싸이클링
• /
• 제3권3호
• /
• pp.7-11
• /
• 1994

$\alpha$-Etchent 부식액과 순수동액을 수소환원시킴으로 아래와 같은 결과를 얻었다. (1) 수소압 및 교반속도가 증가함에 따라 각각 300psi, 500rpm까지는 동의 회수율은 증가하다가 그 이상에서는 오히려 감소하였으나, 반응온도에는 거의 영향을 받지 않았다. 이때 동의 회수율은 순수동용액 및 $\alpha$-Etchent 용액에서 최대 각각 약 90% 및 60%이었다. 또한 모든 실험에 있어 순수동용액이 $\alpha$-Etchent 부식액에서 보다 약 30~40% 동의 회수율이 증가하였다. (2) 반응시간이 증가하면 약 30분까지는 동의 회수율이 증가하지만 그 이상에서는 거의 변화가 없었다. 이때 반응초기에는(30분까지) 침상형의 동분말이었지만 그 이상에서는 포도송이 모양의 noudle 형태로 성장되었고, 분말의 크기는 약 $2~3\mu\textrm{m}$이었다.