• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.445-451
• /
• 1989

Hydrolysis of aluminum isopropoxide with excess water in the presence of excess isopropyl alcohol resulted in the formation of boehmite in independence of temperature of hydrolysis and aging. Stoichiometric and substoichiometric amount of water hydrolyzed aluminum isopropoxide to pseudo-boehmite and amorphous one, respectively. $\alpha$-Al2O3 with 0.3${\mu}{\textrm}{m}$ in median size was produced by calcination of boehmite, bseudo-boehmite and amorphous boehmite at 125$0^{\circ}C$, 120$0^{\circ}C$, and 115$0^{\circ}C$ for one hour, respectively. Singnificant reduction in particle size was found during transition from $\theta$-Al2O3 to $\alpha$-Al2O3. $\alpha$-Al2O3 produced in this study was relatively uniform spherical and its purity was found to be over 99.9%.

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.116-123
• /
• 1997

A chemically stabilized $\beta$-cristobalite, which is stabilized by stuffing cations of $Ca^{2+}$ and $Al^{3+}$, was prepared by a solution-polymerization route employing Pechini resin or PVA solution as a polymeric carrier. The polymeric carrier affected the crystallization temperature, morphology of calicined powder, and particle size distribution. In case of the polyvinyl alcohol (PVA) solution process, a fine $\beta$-cristobalite powder with a narrow particle size distribution (average particle size : 0.3$\mu\textrm{m}$) and a BET specific surface area of 72 $\m^2$/g was prepared by an attrition-milling for 1 h after calcination at 110$0^{\circ}C$ for 1h. Wider particle size distribution and higher specific surface area were observed for the $\beta$-cristobalite powder derived from Pechini resin. The cubie(P1-to-tetraganalb) phase transformation in polynystalline $\beta$-cristobalite was induced at approximately 18$0^{\circ}C$. Like other materials showing transformation toughening, a critical size effect controlled the $\beta$-to-$\alpha$ transformation. Densifed cristobalite sample had some cracks in its internal texture after annealing. The cracks, occurred spontaneoulsy on cooling, were observed in the sample with an average grain sizes of 4.0 $\mu\textrm{m}$ or above. In case of the sintered cristobalite having a composition of CaO.$2Al_2O_3$.40SiO$_2$, small amount of amorphous phase and slow grain growth during annealing were observed. Shear stress-induced transformation was also observed in ground specimen. Cristobalite having a composition of CaO.2Al2O3.80SiO2 showed a more sensitive response to shear stress than the CaO.$2Al_2O_3$.40SiO$_2$ type cristobalite. Shear-induced transformation resulted in an increase of volume about 13% in $\alpha$-cristobalite phase on annealing for above 10 h in the case of the former composition.

• Applied Microscopy
• /
• v.19 no.2
• /
• pp.119-137
• /
• 1989

It has been shown in this and earlier investigation that the turtle bladder mucosa has three main cell types on their mucosal surface. They are the granular cells, ${\alpha}$ CA cells, and ${\beta}$ CA cells. The three major transport mechanisms that occurs in the turtle bladder are sodium reabsorption, proton secretion, and bicarbonate secretion. In the present work the trans-port mechanisms by bladder epithelial cells of freshwater turtle, Pseudemys scripta, are summarized as follows. 1. The granular cells play an important role in sodium transport, while the ${\alpha}$ and ${\beta}$ CA cells do not appear to play a determining role in sodium transport. 2. It appears that the active sodium transport in the granular cells occurs in two-step process, implying that first, sodium diffuses into the cells, followed by an energy-dependent efflux step, which is catalyzed by the ouabain-sensitive Na-K ATPase. 3. The ${\alpha}$ type of CA cells are responsible for the proton secretion using the proton pump on the apical plasma membrane, while the ${\beta}$ type of CA cells are believed to be responsible for bicarbonate secretion. 4. When looked at under freeze-fracture electron microscopy, the apical plasma membrane of ${\alpha}$ cells have a characteristic population of rod-shaped intramembranous particles which are believed to be components of the proton pumps. Conversely, ${\beta}$ type of CA cells show rod-shaped particles in their basolateral plasma membranes, which is consistent with the proton absorptive, bicarbonate secretory mechanism. 5. In the turtle bladder, the ${\alpha}$ and ${\beta}$ type of cells are believed to be both responsible for proton transport, but in opposite directions.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.47-58
• /
• 1997

In this study single crystalline corundum ($\alpha$-$Al_2O_3$) powders were prepared from gibbsite using hydrothermal growing processes. Addition of a mineralizer and the characteristics of solid substances were investigated to find their effects on the size distribution and crystalllnity of products. Experimental results showed that as the concentration of potassium hydroxide (KOH), a mineralizer, the particle size of corundum powders became larger at lower reaction temperatures. However, the size of corundum powders became smaller as the concentration of gibbsite increased in the feedstock. The hydrothermal synthetic conditions are also strongly dependent on the properties of hydrothermal solutions. Corundum powders which have the weight mean particle size of 1~10 $\mu\textrm{m}$ with shapes of hexagonal were prepared in this experiment.

• Journal of the Korean Ceramic Society
• /
• v.28 no.12
• /
• pp.996-1004
• /
• 1991

In this study, we tried to synthesis iron hydroxide suitable for longitudinal magnetic recording media from waste acid, which is a by-product of an iron works factory. Effects of initial pH of reactants, reaction temperature, reaction time for the synthesis of acicular iron hydroxide were studied in relation to particle properties of iron hydroxide and magnetic properties of maghemite powders. As the pH in reactant solution increased, $\beta$-FeOOH(pH=4.5), mixture of $\beta$-FeOOH and $\alpha$-FeOOH(4.5$\alpha$-FeOOH and Fe3O4(6.4$\alpha$-FeOOH (pH>13) was found to from in order. Especially, $\alpha$-FeOOH formed above pH 13 was single phase with superior acicularity. The temperature range over which the single-phase goethite can be formed increased as the initial pH of reactants increased (pH 13:10~5$0^{\circ}C$, pH 13.2:10~7$0^{\circ}C$, pH 13.5:0~8$0^{\circ}C$). The goethite formed between 40~6$0^{\circ}C$ has superior characteristics because the acicularity increased with increasing temperature but at high temperature (>6$0^{\circ}C$) Fe3O4 (pH=13) was found to start to form. Generally, single phase of goethite was found to form after one hour when an optimized condition. The particle size of goethite did not change as the reaction time increased over one hour. Accordingly, the magnetic properties of ${\gamma}$-Fe2O3 produced from goethite were not altered.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.27-36
• /
• 2013

Linear stability analysis for combustion instability within a cylindrical port of solid rocket motor has been conducted. The analysis of acoustic energy has been performed by a commercial COMSOL code to obtain the mode function associated to each acoustic mode prior to the calculation of stability alpha. An instability diagnosis based on the linear stability analysis of Culick is performed where special interests have been focused on 5 stability factors(alpha) such as pressure coupling, nozzle damping, particle damping and additionally, flow turning effect and viscous damping to take into account the flow and viscosity effect near the fuel surface. The instability decay characteristics depending on the particle size is also analyzed.

• Particle and aerosol research
• /
• v.9 no.4
• /
• pp.209-219
• /
• 2013

We have used the modified diffusion flame burner to synthesize silica coated iron oxide nanoparticles having enhanced superparamagnetic property. Silica-encapsulated iron oxide particles were directly observed using a high resolution transmission electron microscope. From the energy dispersive X-ray spectroscopy (EDS) and zeta potential measurements, the iron oxide particles were found to be completely covered by a silica coating layer. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) measurements revealed that the iron oxide core consists of ${\gamma}-Fe_2O_3$ rather than ${\alpha}-Fe_2O_3$. Our magnetization measurements support this conclusion. Biocompatibility test of the silica-coated iron oxide nanoparticles is also conducted using the protein adsorption onto the coated particle.

• Progress in Medical Physics
• /
• v.8 no.1
• /
• pp.47-52
• /
• 1997

Simulations were performed using a Monte Carlo technique in order to show physical phenomena occurring when a heavy charged particle such as proton or alpha particle traverses the medium. It was confirmed that the sharp Bragg peak occurred deeper in the water with the increasing proton energy. It is found that the use of such a sharp Bragg peak due to heavy charged particles would be far superior to the case of the photon or electron, since the absorbed dose in the target tissues would be better localized, thereby minimizing the damage to the surrounding tissues.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.1
• /
• pp.62-68
• /
• 1996

In order to establish making process of water atomized iron powder for powder metallurgy, effect of heat treatment condition on change of powder properties and impurities was investigated at each tempeature of $850{\sim}950^{\circ}C$. The results are as follows. Particle morphology of iron powder changed slightly from sphercial type to irregular type and the amount of fine particle decreased more and more with increasing of heat treatment time at each temperature. The flow rate and apparent desity of iron powder also decreased due to particle coalescence in order of $850^{\circ}C$, $950^{\circ}C$, $900^{\circ}C$. Those powder Properties became to decrease particularly at $900^{\circ}C$ in alpha iron region. On the other hand, residual carbon and oxygen contents in iron powder decreased extremely with increasing of heat treatment temperature and time.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.517-523
• /
• 2011

The estimation filter in radar systems must track targets' position within low tracking error. In the Multi-Function Radar(MFR), ${\alpha}-{\beta}$ filter and Kalman filter are widely used to track single or multiple targets. However, due to target maneuvering, these filters may not reduce tracking error, therefore, may lost target tracks. In this paper, a target tracking filter based on particle filtering algorithm is proposed for the MFR. The advantage of this method is that it can track targets within low tracking error while targets maneuver and reduce impoverishment of particles by the proposed resampling method. From the simulation results, the improved tracking performance is obtained by the proposed filtering algorithm.