• Nuclear Engineering and Technology
• /
• v.24 no.1
• /
• pp.75-85
• /
• 1992

The texture changes and their effect on the 0.2% yield strength of Zircaloy-4 sheet were examined after quenched from the ($\alpha$+$\beta$) phase temperature. When the prior ($\alpha$+$\beta$) gram size was slightly larger than that of the $\alpha$-annealed, the observed texture was similar to the $\alpha$-annealed texture having an ideal orientation of the (0001) basal pole at 30$^{\circ}$away from the normal direction toward the transverse direction. When the prior ($\alpha$+$\beta$) grain size was twice as large as that of the $\alpha$-annealed, the location of maximum basal pole intensity was distributed between the transverse and the rolling direction making an angle 15$^{\circ}$from the normal direction, and the observed texture became isotropic. It was found that the Kearns texture parameter, fr, in the rolling direction increased steadily, and fr in the transverse direction increased slightly, while fr in the the normal direction decreased with increasing heat treatment time. With a small increase in fr, the 0.2% yield strength increased drastically. The influence of texture was analyzed by deriving the Schmid orientation factors and the resolved shear stresses for the deformation systems. It was found that the large increase in the 0.2% yield strength was attributed mainly to the microstructural changes and partly to the texture changes by the ($\alpha$+$\beta$) heat treatment.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.459-467
• /
• 1998

The existing methods to analyze the heterogeneous porous media based on the similar media concept are the microscopic Miller similitude(MiS), the macroscopic Miller similitude(MaS) and the Warrick similitude(WS). The inter-relationship is found such that MiS ⊂ MaS ⊂ (⊂:subset). The proposed method is based ont eh assumption that the scale variables $\alpha$=w and the moisture content is dimensionless by introducing the effective degree of saturation instead of the degree of saturation into WS. The method, without the loss of generality in view of the inspectional analysis, can explain the heterogeneity of the media by using the scale variable $\alpha$ only. The media of $\alpha$=1 (average of $\alpha$) means the equivalent media corresponding to the heterogeneous media, while the standard deviation of $\alpha$ may explain the degree of the heterogeneity of the media under consideration. The hydraulic conductivity of the media with $\alpha$>1 is greater than that of the equivalent media, and the effective moisture content of the media with $\alpha$>1 is also greater. Based on these properties of the scale variable $\alpha$, the ideal vertical one-dimensional heterogeneous porous media is generated by using the technique of random number generation.

• The Korean Journal of Pain
• /
• v.27 no.4
• /
• pp.313-320
• /
• 2014

Dexmedetomidine, an imidazoline compound, is a highly selective ${\alpha}_2$-adrenoceptor agonist with sympatholytic, sedative, amnestic, and analgesic properties. In order to minimize the patients' pain and anxiety during minimally invasive spine surgery (MISS) when compared to conventional surgery under general anesthesia, an adequate conscious sedation (CS) or monitored anesthetic care (MAC) should be provided. Commonly used intravenous sedatives and hypnotics, such as midazolam and propofol, are not suitable for operations in a prone position due to undesired respiratory depression. Dexmedetomidine converges on an endogenous non-rapid eye movement (NREM) sleep-promoting pathway to exert its sedative effects. The great merit of dexmedetomidine for CS or MAC is the ability of the operator to recognize nerve damage during percutaneous endoscopic lumbar discectomy, a representative MISS. However, there are 2 shortcomings for dexmedetomidine in MISS: hypotension/bradycardia and delayed emergence. Its hypotension/bradycardiac effects can be prevented by ketamine intraoperatively. Using atipamezole (an ${\alpha}_2$-adrenoceptor antagonist) might allow doctors to control the rate of recovery from procedural sedation in the future. MAC, with other analgesics such as ketorolac and opioids, creates ideal conditions for MISS. In conclusion, dexmedetomidine provides a favorable surgical condition in patients receiving MISS in a prone position due to its unique properties of conscious sedation followed by unconscious hypnosis with analgesia. However, no respiratory depression occurs based on the dexmedetomidine-related endogenous sleep pathways involves the inhibition of the locus coeruleus in the pons, which facilitates VLPO firing in the anterior hypothalamus.

• Restorative Dentistry and Endodontics
• /
• v.49 no.1
• /
• pp.3.1-3.8
• /
• 2024

This article is a narrative review that discusses the recommended sample size requirements to design a pilot study to assess the reliability of a questionnaire. A list of various sample size tables that are based on the kappa agreement test, intra-class correlation test and Cronbach's alpha test has been compiled together. For all calculations, type I error (alpha) was set at a maximum value of 0.05, and power was set at a minimum value of 80.0%. For the kappa agreement test, intra-class correlation test, and Cronbach's alpha test, the recommended minimum sample size requirement based on the ideal effect sizes shall be at least 15, 22, and 24 subjects respectively. By making allowances for a non-response rate of 20.0%, a minimum sample size of 30 respondents will be sufficient to assess the reliability of the questionnaire. The clear guideline of minimum sample size requirement for the pilot study to assess the reliability of a questionnaire is discussed and this will ease researchers in preparation for the pilot study. This study provides justification for a minimum requirement of a sample size of 30 respondents specifically to test the reliability of a questionnaire.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.491-498
• /
• 2009

The critical micelle concentration (CMC) and the counter ion binding constant (B) for the mixed micellizations of DBS (sodium dodecylbenzenesulfonate) with Brij 30 (polyoxyethylene(4) lauryl ether) and Brij 35 (polyoxyethylene (23) lauryl ehter) at 25 ${^{\circ}C}$ in pure water and in aqueous solutions of n-butanol were determined as a function of $\alpha$1 (the overall mole fraction of DBS) by the use of electric conductivity method. Various thermodynamic parameters (Xi, $\gamma$i, Ci, aiM, $\beta$, and ${\Delta}H_{mix}$) were calculated and compared for each mixed surfactant system by means of the equations derived from the nonideal mixed micellar model. There sults show that the molecules of DBS interact more strongly with Brij 35 than Brij 30 and that the DBS/Brij35 mixed system has greater negative deviation from the ideal mixed micellar model than the DBS/Brij 30mixed system.

• Journal of the Korean Chemical Society
• /
• v.53 no.2
• /
• pp.118-124
• /
• 2009

The values of critical micelle concentration (CMC) and counter ion binding constants (B) in a micellar state of CPC (1-hexadecylpyridinium chloride) with Brij 35 (polyoxyethylene(23) lauryl ether) in water were determined as a function of ${\alpha}_1$ (the overall mole fraction of CPC) by the use of electric conductivity method. Various thermodynamic parameters ($X_i,\;{\gamma}_i,\;C_i,\;a_{i}^{M},\;\beta,\;and\;{\Delta}H_{mix}$) were calculated and analyzed by means of the equations derived from the non-ideal mixed micellar model. And thermodynamic parameters (${\Delta}{G^o}_m,\;{\Delta}{H^o}_m,\;and\;{\Delta}{S^o}_m$) for the micellization of CPC/Brij 35 mixtures were also calculated from the temperature dependence of the CMC values. The values of ${\Delta}{G^o}_m$ are all negative, but the values of ${\Delta}{S^o}_m$ and ${\Delta}{H^o}_m$ are positive or negative, depending on the measured temperature and ${\alpha}_1$.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.366-371
• /
• 1995

High performance magnetic materials are characterized by the combination of outstanding magnetic properties and optimized microstructures, e.g., nanocrystalline composites of multilayers and small particle systems. The characteristic parameters of the hysteresis loops of these materials vary over more than a factor of $10^{6}$ with optimum values for the coercive field of several Tesla and permeabilities of $10^{6}$. Within the framework of the computational micromagnetism (nanomagnetism) using the finite element method the upper and lower bounds of the coercive field of different types of grain ensembles and multilayers have been determined. For the case of nanocrystalline composites the role of grain size, exchange and dipolar coupling between grains and the degree of grain alignment will be discusses in detail. It is shown that the largest coercivities are obtained for exchange decoupled grains, whereas remanence enhancing requires exchange coupled grains below 20 nm. For composite permanent magnets based on $Nd_{2}Fe_{14}B$ with an amount of ~ 50% soft $\alpha$-Fe-phase coercivities of ${\mu}_{0}H_{c}=0.75\;T$, a remanence of 1.5 T and an energy product of $400\;kJ/m^{3}$ is expected. In nanocrystalline systems the temperature dependence of the coercivity is well described by the relation ${\mu}_{0}H_{c}=(2\;K_{1}/M_{s}){\alpha}-N_{eff}{\mu}_{0}M_{s}$, where the microstructural parameters $\alpha$ and $N_{eff}$ take care of the short-range perturbations of the anisotropy and $N_{eff}$ is related to the long-range dipolar interactions. $N_{eff}$ is found to follow a logarithmic grain size size dependence ${\mu}_{0}H_{c}=(2\;K_{1}/M_{s}){\alpha}-N_{eff}(\beta1nD){\mu}_{0}M_{s}$. Several trends how to achieve the ideal situation $\alpha$->1 and $N_{eff}$->1->0 will be discussed.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.86-89
• /
• 2004

The present study reports the preparation of a compact ZSM-5 membrane showing high thermal stability and high separation factors, especially n-/i-butane isomers at high temperatures. ZSM-5 membrane was prepared on a porous $\alpha$-Al$_2$O$_3$ tube (an average pore diameter, ca. 100 nm) at 18$0^{\circ}C$ by the seed-assisted crystallization method. The XRD and SEM results showed that a thin zeolite layer (ca. 1 ${\mu}{\textrm}{m}$) was formed on the support surface. The single gas permeances of $N_2$, H$_2$, SF$_{6}$, n-butane, and i-butane were taken at 27$0^{\circ}C$. i-Butane permeance hardly changed after repeated thermal treatments up to 40$0^{\circ}C$, indicating the membrane is thermally stable. On the other hand, other single gas permeances increased when the membrane was further dried at 40$0^{\circ}C$, indicating thermal pretreatment at 27$0^{\circ}C$ could not remove all the adsorbed species in the membrane. i-Butane and SF$_{6}$ permeances were significantly lower than the permeances of smaller molecules, indicating that the membrane has a low concentration of defects. The ideal selectivities at 27$0^{\circ}C$ were 61 for $H_2$/i-butane and 47 for $H_2$/SF$_{6}$. The temperature dependency of n/i-butane ideal selectivities and separation factors for an equimolar n/i-butane mixture was studied. The ideal selectivity showed a maximum of 36 at 30$0^{\circ}C$. The separation factors increased with temperature and reached around 12 at 300-40$0^{\circ}C$, which were much higher than those reported in the literature.ature.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.223-232
• /
• 2014

The feasibility of a virtual colored overlay is based on constraints of computer and user preference and it is evaluated for people with Scotopic Sensitivity Syndrome. We draw ${\alpha}$ and chromaticities of virtual colored overlay which will be implemented on IT devices by measuring optical characteristics of 2 representative film overlays and simulating them. We analyzed the influence of two illuminating conditions on the virtual colored overlay. We find that it is possible to get the multiple combinations of alpha and source RGB values to match a chromaticity which is presented in CIE-Luv color space under ideal white condition of display, a user can select one among them with respect to clarity and comfort. Under 100 lx difference of illumination conditions, the changes of chromaticities are negligible, but luminances are increased $37.8cd/m^2$ average(std 2.006) at high illumination condition.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.75.1-75.1
• /
• 2017

Ram pressure due to the intracluster medium (ICM) is known to play a crucial role in removing the cool gas content of a galaxy on a short timescale, potentially driving a star forming galaxy to evolve into a red passive population. Although many HI imaging studies find clear evidence of diffuse atomic gas stripping from cluster galaxies, it is still debatable whether the ram pressure can also strip dense molecular gas. NGC 4522, a Virgo spiral, undergoing strong ram pressure stripping, is one of the few cases where extraplanar CO emission together with stripped HI gas and $H{\alpha}$ knots has been identified, providing an ideal laboratory to study the molecular gas stripping event and the extraplanar star formation activity. The aim of this work is to investigate the origin of extraplanar molecular clouds near NGC 4522 (e.g. stripped or forming in situ), and to probe a relation between the molecular gas surface density and the star formation rate (i.e. the Kennicutt-Schmidt law) at sub-kpc scale, especially in the extraplanar space, using ALMA Cycle 3 CO data and $H{\alpha}$ data of NGC 4522. We present the results from our ALMA observations, and discuss possible scenarios for the origin of extraplanar molecular clouds and to characterize the star formation activity associated with stripped gas outside the galactic disk.