• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.457-465
• /
• 1997

The Shape optimization makes it possible to reduce the weight of structure and cost then member sizing optimization. A vast amount of imprecise information is existed in constraints of the optimum design. It is very difficult and sometimes confusing to describe and to deal with the several criteria which contain fuzzy degrees of relatives importance. This paper proposed weighting strategies in the multiobjective shape optimization of fuzzy structural system by ${\alpha}$-cut approach. The algorithm in this research is numerically tested for 2-bar truss structure. The result show that. the user can choose the one optimum solution in practices as obtaining the optimum solutions according to the ${\alpha}$-cut approach, weight of volume and displacement.

• Journal of the Korean Ceramic Society
• /
• v.39 no.5
• /
• pp.467-472
• /
• 2002

Long Carbon Nanotubes(CNTs) were cut by diamond lapping film followed by observation using SEM. The paste was prepared by mixing shortened CNT powder, ${\alpha}$-terpineol used as a solvent, and ethylcellulose as a binder. This paste was deposited on glass substrate by screen printing and extruded by syringe. After screen printing, several post-treatments were performed to control the alignment of CNTs perpendicular to the substrate. The deposited CNTs were scratched by sand paper or diamond lapping film. It was also treated by attachment followed by an immediate detachment using the adhesive tape. SEM observation indicates that excellent vertical alignment of CNTs could be achieved by simple post-treatments from the screen printed-CNTs paste. Similar alignment of CNTs is also observed in the as-extruded CNTs paste.

• Environmental Mutagens and Carcinogens
• /
• v.8 no.1
• /
• pp.1-12
• /
• 1988

The effects of aphidicolin (APC), an inhibitor of DNA polymerase alpha, or 2', 3'-dideoxythymidine 5'-triphosphate (ddTTP), an inhibitor of DNA polymerase beta, on the repair of DNA damage induced by ethyl methanesulfonate (EMS) or bleomycin (BLM) were investigated in Chinese hamster ovary (CHO)-K1 cells. Three assays were employed in this study: unscheduled DNA synthesis, alkaline elution and alkaline sucrose gradient sedimentation. It was shown that APC or ddTTP inhibited DNA induced by EMS, and thus, the post-treatment with APC or ddTTP following EMS treatment was resulted in the more amount of unscheduled DNA synthesis, and the more accumulation of DNA single-stand breaks than the cells post-incubated without APC or ddTTP. While, in the BLM induced DNA repair, only ddTTP inhibited DNA repair induced by BLM. And thus, the groups post-incubated with or without APC after BLM treatment had the same value in the amount of unscheduled DNA synthesis and of DNA single-strand breaks, while post-treatment with ddTTP was resulted in the increased amount of unscheduled DNA synthesis and the increased DNA sin -strand breaks than the group without ddTTP. These results suggested that both of DNA polymerase $\alpha$ and $\beta$ participated in the repair of DNA damage induced by EMS, but in BLM-induced DNA repair, polymerase $\beta$ participated.ipated.

• Applied Microscopy
• /
• v.19 no.2
• /
• pp.119-137
• /
• 1989

It has been shown in this and earlier investigation that the turtle bladder mucosa has three main cell types on their mucosal surface. They are the granular cells, ${\alpha}$ CA cells, and ${\beta}$ CA cells. The three major transport mechanisms that occurs in the turtle bladder are sodium reabsorption, proton secretion, and bicarbonate secretion. In the present work the trans-port mechanisms by bladder epithelial cells of freshwater turtle, Pseudemys scripta, are summarized as follows. 1. The granular cells play an important role in sodium transport, while the ${\alpha}$ and ${\beta}$ CA cells do not appear to play a determining role in sodium transport. 2. It appears that the active sodium transport in the granular cells occurs in two-step process, implying that first, sodium diffuses into the cells, followed by an energy-dependent efflux step, which is catalyzed by the ouabain-sensitive Na-K ATPase. 3. The ${\alpha}$ type of CA cells are responsible for the proton secretion using the proton pump on the apical plasma membrane, while the ${\beta}$ type of CA cells are believed to be responsible for bicarbonate secretion. 4. When looked at under freeze-fracture electron microscopy, the apical plasma membrane of ${\alpha}$ cells have a characteristic population of rod-shaped intramembranous particles which are believed to be components of the proton pumps. Conversely, ${\beta}$ type of CA cells show rod-shaped particles in their basolateral plasma membranes, which is consistent with the proton absorptive, bicarbonate secretory mechanism. 5. In the turtle bladder, the ${\alpha}$ and ${\beta}$ type of cells are believed to be both responsible for proton transport, but in opposite directions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.129-129
• /
• 2017

열전재료는 열에너지를 전기에너지로 또는 전기에너지를 열에너지로 직접 변환하는데 가장 널리 사용되는 재료이다. $Bi_2Te_3$계 열전 재료는 400K 이하의 비교적 저온 영역에서 높은 성능지수(Dimensionless Figure of merit, ZT($={\alpha}2{\sigma}T/{\kappa}$, ${\alpha}$: 제백계수, ${\sigma}$: 전기전도도, T: 절대온도, ${\kappa}$: 열전도도))를 나타내는 열전재료이며 자동차 시트나 정수기 등에 응용되고 있다. 열전모듈은 제조시 수십 개에서 수백 개 이상의 n형 및 p형 열전소자를 알루미나($Al_2O_3$)와 같은 세라믹 기판(substrate) 상에 접합된 동 전극 위에 전기적으로 서로 직렬로 접합시켜 제조한다. 기존의 열전모듈의 제조방법에는 동 전극 위에 위에 Sn합금 분말과 플럭스(flux)의 혼합물인 솔더페이스트를 스크린 인쇄법을 사용하여 동 전극에 도포한 다음, 그 위에 열전소자를 얹고 약 520K의 열풍을 가하여 솔더를 용융시켜 열전소자와 동 전극을 접합시킨다. 스크린 인쇄법에서는 인쇄 압력이 일정하지 않으면, 솔더페이스트 층의 두께가 균일하지 않게 되어 열전소자 접합부의 불량을 유발시킨다. 그러나 열모듈은 단 하나의 접합 불량이 모듈 전체의 열전변환성능에 심각한 영향을 줄 수 있기 때문에 본 연구에서는 이러한 문제점을 해결하기 위해, 솔더페이스트를 도포하지 않고 열전소자를 직접 동 전극과 접합할 수 있는 방법을 고안하였다. 무전해도금을 이용한 니켈층을 형성시킨 $Bi_2Te_3$계 열전소자 표면에 약 $50{\mu}m$의 주석도금층을 전기도금법을 구사하여 형성시켰다. 그 후, wire cutting을 통하여 $3mm{\times}3mm{\times}3mm$의 크기로 절단한 주석도금된 열전소자를 동 전극에 얹고 1.1KPa의 압력을 가하면서 523K의 핫플레이트 위에서 3분간 방치하여 직접(direct) 열압착 접합을 실시하였다. 접합부의 단면을 SEM을 이용하여 관찰한 결과, 동 전극과 열전소자 사이의 계면에 용융 후 응고된 주석층이 결함없이 균일하게 형성된 양호한 접합부를 관찰할 수 있었다. 따라서, 솔더페이스트를 이용하지 않고, 열전소자 표면에 주석도금을 실시한 후, 동 전극과 직접 열압착 본딩을 실시하는 방법은 균일한 접합계면을 얻을 수 있는 새로운 공정으로 기대된다.

• The Journal of the Petrological Society of Korea
• /
• v.9 no.4
• /
• pp.205-210
• /
• 2000

Measurements of phase identification and degree of orientation for fine-grained (about 0.3 mm in diameter) minerals in rock samples performed by micro-area X-ray diffractometer.$Al_{2}SiO_{5}$ polymorphs (andalusite, kyanite and sillimanite) were chosen for the measurements and target minerals were existed on thin sections. Micro-area X-ray diffractometer is composed of 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillating goniometer and position sensitive proportional counter (PSPC). $CuK_{\alpha}$ radiation was used as X-ray source and a pin hole ($50\;\mu\textrm{m}$$ in diameter) collimator was selected to focus radiation X-ray onto the target minerals. Phase identification and diffracted X-ray peak indexing were carried out by 3(${\omega}\;{\chi}\;{\phi}$)-circle oscillation measurement. Then, 2(${\omega}\;{\phi}$)-circle oscillation measurement was made for the purpose of searching the prevailing lattice plane of the minerals on thin section surface. Finally, for a selected peak by 2-circle oscillation measurement, X-ray pole figure measurement was executed for the purpose of check the degree of orientation of the single lattice direction and examine its pole distribution. As a result of 3-circle oscillation measurement, it was possible that phase identification among $Al_{2}SiO_{5}$ polymorphs. And from the results of 2-circle oscillation measurement and X-ray pole figure measurement, we recognized that poles of andalusite (122), kyanite (200) and sillimanite (310) lattice plances were well developed with direction normal to each mineral surface plane respectively. Therfore, the measurements used with micro-area X-ray diffractometer in this study will be a useful tool of phase identification and degree of orientation measurement for fine-grained rock forming minerals.

• Korean Journal of Psychosomatic Medicine
• /
• v.24 no.1
• /
• pp.83-93
• /
• 2016

Objectives : The Center for Epidemiologic Studies Depression scale-Revised is a recently revised scale which has been reported as a valid tool for the assessment of depressive symptoms. It encompasses cardinal symptoms of depression described in the Diagnostic and Statistical Manual of Mental disorders, fourth edition. In this study, we assessed the reliability, validity and psychometric properties of the Korean version of the CESD-R(K-CESD-R). Methods : Forty-eight patients diagnosed as major depressive disorder, dysthymia, depressive disorder NOS according to the DSM-IV criteria using Mini International Neuropsychiatric Interview and 48 healthy controls were enrolled in this study. They were assessed with K-CESD-R, K-MADRS, PHQ-9, KQIDS-SR, STAI to check cross-validation. Statistical analyses were performed using calculation of Cronbach's alpha, Pearson correlation coefficient, Principal Component Analysis, ROC curve and optimal cut-off value. Results : The Cronbach's alpha of K-CESD-R was 0.98. The total score of K-CESD-R revealed significantly high correlations with those of K-MADRS, PHQ-9, KQIDS-SR(r=0.910, 0.966 and 0.920, p<0.001, respectively). Factor analysis showed two factors account for 76.29% of total variance. We suggested the optimal cut-off value of K-CESD-R as 13 according to analysis of the ROC curve which value sensitivity and specificity both equally. Conclusions : These Results showed that the K-CESD-R could be a reliable and valid scale to assess depressive symptoms. The K-CESD-R is expected as a useful and effective tool for screening and measuring depressive symptoms not only in outpatient clinic but also epidemiologic studies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.128-128
• /
• 2000

박막의 탄성 특성을 평가하는 방법으로 nano-indentation, Brillouin light scattering measurement, ultrasonic surface wave measurement, bulge test, vibration membrane method 등 여러 가지가 제시되어 왔다. 이러한 방법들은 필름의 두께가 일정 두께 이상이 되어야 정확한 측정이 가능한 방법으로 매우 얇은 박막에서도 탄성특성을 평가할 수 있는 freehang, bridge 방법이 제시되었으며, 이 방법은 간단한 식각 공정을 통해 매우 얇은 박막에도 적용시킬 수 있다는 장점을 가지고 있다. 본 연구에서는 아주 얇은 박막에서도 탄성특성을 평가할 수 있는 freehang 방법을 이용하여 순수한 Diamond-like carbon (DLC) 필름과 Sidl 첨가된 DLC 필름의 탄성 특성을 평가하고자 한다. 실험에서 사용한 필름은 rf-PACVD 장비를 이용하여 증착하였다. 이때 전극과 플라즈마 사이의 바이어스 음전압은 -400 Vb로 합성압력은 10mTorr로 고정하였다. 사용한 반응 가스는 벤젠(C6H6), 그리고 벤젠과 희석된 실렌(SiH4 : H2 = 10 : 90)이며, 희석된 실렌의 첨가량을 조절하여 필름 내에 일정량의 Si을 함유시켰다. 각각의 조건에서 증착시간을 조절하여 필름의 두께를 변화시켰으며, KOH(5.6mol) 용액을 이용하여 습식 식각을 함으로써 freehang을 제작하였다. 이때 식각액에 의한 DLC 필름의 손상은 관찰되지 않았다. 필름의 잔류 응력을 측정하기 위해 200$\pm$10 혹은 100$\pm$5$\mu\textrm{m}$ 두께의 얇은 (100) Si wafer를 5$\times$50 mm2의 strip 형태로 절단하여 사용하였다. 필름의 압축 잔류 응력에 의해 발생한 필름/기판 복합체의 곡률은 laser 반사법과 $\alpha$-step profiler를 이용하여 측정하였으며, 이 결과를 Brenner 등에 유도된 식을 이용하여 잔류 응력을 계산하였다. 또한 제작된 frddhang은 광학 현미경과 전자주사현미경에 의해 관찰되었다. 이렇게 제작된 freehang을 이용하여 필름이 기판에 부착되기 위해 필요한 변형률을 측정하고, 독립적으로 측정된 필름의 잔류 응력을 박막의 응력-변형률 관계식에 적용하여 biaxial elastic modulus, E/(1-v)를 구할 수 있었다. 측정 결과 필름의 잔류 응력과 biaxial elastic modulus는 필름의 두께가 감소함에 따라 감소하는 경향을 나타냈으며, 같은 두께의 필름인 경우, 식각 깊이에 따른 biaxial elastic modulus 의 변화를 통해 최적의 식각 깊이를 알 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.141-150
• /
• 2002

Owing to a need for simple extraction and purification for analysis of water soluble vitamins in food samples by RP-HPLC with UV-detector, the methods of bromelain and protease hydrolysis and $C_{18}$ Sep-Pak solid phase extraction were employed. The recoveries of standard water soluble vitamins by the bromelain and protease hydrolysis and $C_{18}$ Sep-Pak solid phase extraction were significantly high compared to AOAC methods in most of vitamins. The contents of pyridoxal determined with protest in the pork was similar, but in the bromelain hydrolysis and AOAC method, was high compared to the results of reference. The niacinamide, thiamin and riboflavin determined with bromelain and protease hydrolysis showed similar values to the results of references. In the potato, pyridoxamine was detected in the AOAC method, which was not detected in the bromelain and protease hydrolysis methods. Pyridoxal contents in the protease hydrolysis and AOAC methods were very similar to the results of references. The recoveries of fortified standard vitamins in food samples were significantly high and accurate compared to those of AOAC methods. The extraction and purification with $C_{18}$ Sep-Pak solid extractor might be considered superior method for the determination of water soluble vitamins in food samples.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.60-64
• /
• 2007

Ba-Ferrite single crystals were prepared and characterized by X-ray, SEM and Mossbauer spectroscopy. The single crystal layers was cut in the c-axis and radiated to the surface by ${\gamma}-rays$ for Mossbauer spectroscopy. We found out that the spin states in Fe atoms were parallel to the ${\gamma}-rays$ direction. The temperature dependence of the hyperfine field is almost similar to that of powder samples. The crystal structure is a Magnetoplumbite without any other phases and the lattice parameters are found out with $a_0=5.892{\AA},\;b_0=5.892{\AA},\;c_0=23.198{\AA}$. $M\"{o}ssbauer$ spectrum in single crystal have 5 sets off absorption lines in each Fe site when the ${\gamma}-rays$ have the same radiation direction with the c-axis in the crystal, which mean that the whole crystal bulk formed only one crystal and same spin direction. The hysteresis curve shows the saturation moment and coercive force of 70.71 emu/g and 320 Oe respectively.