• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.101-104
• /
• 2000

Li-graphite intercalation compounds (GICs), synthesized at elevated temperature and pressure, were allowed to decompose spontaneously in the atmosphere. The decomposition processes were analyzed by of X-ray diffraction, DSC analysis, FT-IR measurements, UV/VIS spectrophotometry. The deintercalation reaction of the Li-GICs ceased after 6 weeks and only the residual compounds could be observed. A strong exothermic reaction was observed at 300 $^{\circ}C$ in thermal decomposition, and relatively stable decomposition curves were formed. A few endothermic curves have been observed at 1000 $^{\circ}C.$ After 6 weeks deintercalation reaction time of GICs, many exothermic and endothermic reactions were accompanied at the same time. In addition the reactions of the functional groups such as aromatic rings, nitrogen, $-CH_3$, $-CH_2$ etc. of GDIC obtained by the above reaction were confirmed by FT-IR spectrum. UV/VIS spectrophotometric measurement clearly shows the formation of a minimum energy value ($R_{min}$) for the compounds between Li-GICs as a starting material and Li-GDICs obtained until after 3 weeks of the deintercalation reaction, while they were no clear energy curves from 4 weeks of reaction time, because of the formation of the graphite structure, of high stages and of the Li compounds surrounding the graphite in the deintercalation reaction.

• Corrosion Science and Technology
• /
• 제22권6호
• /
• pp.466-477
• /
• 2023

The increasing demand for high-performance energy storage systems has highlighted the limitations of conventional Li-ion batteries (LIBs), particularly regarding safety and energy density. All-solid-state batteries (ASSBs) have emerged as a promising next-generation energy storage system, offering the potential to address these issues. By employing nonflammable solid electrolytes and utilizing high-capacity electrode materials, ASSBs have demonstrated improved safety and energy density. Automotive and energy storage industries, in particular, have recognized the significance of advancing ASSB technology. Although the use of Li metal as ASSB anode is promising due to its high theoretical capacity and the expectation that Li dendrites will not form in solid electrolytes, persistent problems with Li dendrite formation during cycling remain. Therefore, the exploration of novel high-performance anode materials for ASSBs is highly important. Recent research has focused extensively on alloy-based anodes for ASSBs, owing to their advantages of no dendrite formation and high-energy density. This study provides a comprehensive review of the latest advancements and challenges associated with alloy-based anodes for ASSBs.

• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.843-849
• /
• 1989

Effect of Bi2O3/Li2CO3 on low temperature sinteirng and dielectric property of BaTiO3 ceramics has been investigated. For the specimen sintered at 110$0^{\circ}C$, it was densified to 96% of BaTiO3 theoretical density by the addition of 1.0-1.25w/o Bi2O3/Li2CO3. Maximum dielectric constant increased and Curie temperature lowered with the increase of Bi2O3/Li2CO3 content, which probably can be explained by thne substitution of Bi3+, Li1+ on BaTiO3 lattice. The volatilization of Li1+, resulting from the increase of soaking time at 110$0^{\circ}C$ leads to the increase of Curie temperature and tetragonality of the specimen.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1144-1148
• /
• 2002

We prepared the polyaniline (Pani) film and powder by chemical polymerization and doping with different dopants and also investigated the capability of Li//polyaniline cells after assembling. The oxidation/reduction potentials and electrochemical reaction of Li//polyaniline cells were tested by cyclic voltammetry technique. The Li//Pani-HCl cells with 10% and 20% conductors show a little larger specific discharge capacities than that without conductor. The highest discharge capacity of almost 50 mAh/g at 100th cycle is also achieved. However, Li//Pani-LiPF6 with 20% conductor shows a remarkable performance of ~90 mAh/g at 100th cycle. This is feasible value for using as the positive electrode material of lithium ion secondary batteries. It is also proved that the powder type electrode of Pani is better to use than the film type one to improve the specific discharge capacity and its stability with cycle.

• Journal of Magnetics
• /
• 제6권3호
• /
• pp.77-79
• /
• 2001

The semi-empirical superposition model has been applied to calculate the zero field splitting parameters of $Mn^{2+}$ion in $LiTaO_3$ single crystal, assuming that $Mn^{2+}$ion occupies one of two possible sites: $Li^{l+} \;or\; Ta^{5+}$ site, respectively. The 2nd-order axial zero field splitting parameters are $958\times10^{-4}cm^{-1}\; at\; Li^{1+}$ site and $193\times 10^{-4}cm^{-1} \;at\; Ta^{5+}$ site for $Mn^{2+}$ions. The 4th-order zero field splitting parameters at $Li^{l+} \;and\; Ta^{5+}$ sites are also determined. These calculated zero field splitting parameters are very important to determine the substitutional sites of doped impurity ions in $LiTaO_3$ crystal.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2573-2576
• /
• 2013

Rate capability and cyclability of $LiMn_2O_4$ should be improved in order to use it as a cathode material of lithium-ion batteries for hybrid-electric-vehicles (HEV). To enhance the rate capability and cyclability of $LiMn_2O_4$, it was coated with $MnV_2O_6$ by a sol-gel method. A $V_2O_5$ sol was prepared by a melt-quenching method and the $LiMn_2O_4$ coated with the sol was heat-treated to obtain the $MnV_2O_6$ coating layer. Crystal structure and morphology of the samples were examined by X-ray diffraction, SEM and TEM. The electrochemical performances, including cyclability at $60^{\circ}C$, and rate capability of the bare and the coated $LiMn_2O_4$ were measured and compared. Overall, $MnV_2O_6$ coating on $LiMn_2O_4$ improves the cyclability at high temperature and rate capability at room temperature at the cost of discharge capacity. The improvement in cyclability at high temperature and the enhanced rate capability is believed to come from the reduced contact between the electrode, and electrolyte and higher electric conductivity of the coating layer. However, a dramatic decrease in discharge capacity would make it impractical to increase the coating amount above 3 wt %.

• 대한전자공학회논문지SD
• /
• 제48권12호
• /
• pp.15-22
• /
• 2011

전계 측정시스템에서 센서 감지부로 $1.3{\mu}m$ 파장에서 동작하는 대칭/비대칭 구조의 Mach-Zehnder 간섭기를 구현하였다. BPM 전산모사를 통해서 소자를 설계하였고, $LiNbO_3$에 Ti 확산방법으로 구현된 채널 광도파로에 집중전극구조를 배열하여 집적광학 칩을 제작하였다. 대칭 구조로 위상차가 없도록 제작된 소자는 전기신호 200Hz, 1kHZ 구형 파형에서 반 파장전압 $V_{\pi}$=6.6V, 변조 깊이 100%, 75%로 각각 측정되었다. 한편 ${\pi}$/2 위상차를 갖도록 설계된 비대칭 구조에서는 DC 0V에서 측정된 출력 광세기가 최고치에 약 1//2에 해당됨을 확인하였으며, 1kHz 전기 신호를 인가해서 ${\pi}$/2 위상차 때문에 나타나는 전기적 현상들을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3303-3310
• /
• 2012

Two single crystals of fully dehydrated partially $Li^+$-exchanged zeolite X were prepared by the exchange of Na-X, $Na_{92}Si_{100}Al_{92}O_{384}$ (Si/Al = 1.09), with $Li^+$ using aqueous 0.1 M $LiNO_3$ at 293 (crystal 1) and 333 K(crystal 2), followed by vacuum dehydration at 623 K and $1{\times}10^{-6}$ Torr for 2 days. Their structures were determined by single-crystal synchrotron X-ray diffraction techniques in the cubic space group $Fd{\overline{3}}$ at 100(1) K. Their structures were refined using all intensities to the final error indices (using the 1281 and 883 reflections for which ($F_o$ > $4{\sigma}(F_o)$) $R_1/R_2$ = 0.075/0.244 and 0.074/0.223 for crystals 1 and 2, respectively. Their compositions are seen to be ${\mid}Li_{86}Na_6{\mid}[Si_{100}Al_{92}O_{384}]$-FAU and ${\mid}Li_{87}Na_5{\mid}[Si_{100}Al_{92}O_{384}]$-FAU, respectively. In crystal 1, 17 $Li^+$ ions per unit cell are at site I', 15 another site I', 30 at site II, and the remaining 16 at site III; 2 $Na^+$ ions are at site II and the remaining 4 at site III'. In crystal 2, 32 and 30 $Li^+$ ions per unit cell fill sites I' and II, respectively, and the remaining 25 at site III'; 2 and 3 $Na^+$ ions are found at sites II and III', respectively. The extent of $Li^+$ exchange increases slightly with increasing ion exchange temperature from 93% to 95%.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.587-591
• /
• 2009

Lithium salt have been used mainly as electrolyte of thermal battery for electricity storage. Recently, The 3phase lithium salt(LiCl-LiF-LiBr) is tried to use as electrolyte of thermal battery for high electric power. It is reported that LiCl-LiF-LiBr salt have high ion mobility due to its high lithium ion concentration. Solid lithium salt is melt to liquid state at above $500{^{\circ}C}$. The lithium ion is easily reacted with support materials. Because the melted lithium ion has small ion size and high ion mobility. For the increasing mechanical strength of electrolyte pellet, the research was started to apply ceramic filter to support of electrolyte. In this study, authors used SiOC web and glass fiber filter as ceramic mat for support of electrolyte and impregnated LiCl-LiF-LiBr salt into ceramic mat at above $500{^{\circ}C}$. The fabricated electrolyte using ceramic mat was washed with distilled water for removing lithium salt on ceramic mat. The washed ceramic mat was observed for lithium ion reaction behavior with XRD, SEM-EDS and so on.

• 대한화학회지
• /
• 제47권6호
• /
• pp.619-624
• /
• 2003

졸겔법을 사용하여 $Gd_{1.9-x}Li_{0.1}Eu_xO_3$(x=0.02, 0.05, 0.08, 0.12) 형광체 분말을 합성하였다. 형광체 입자의 표면을 나노 크기의 $SiO_2$(입자크기${\thickapprox}30 nm$)로 코팅한 후 스핀-코팅법으로 유리 기판에 형광체 막을 제작하였다. 유리의 연화온도인 $700^{\circ}C$ 부근에서 융착 되는 $SiO_2$ 나노 입자들에 의해 $Gd_{1.9-x}Li_{0.1}Eu_xO_3$ 입자들은 유리 기판 표면 위에 강하게 융착 되었다(>9H, 연필 경도계). 본 연구에서 채택한, 형광체 막을 제조하는 간단하고 비용이 저렴한 이 방법은 디스플레이장치의 응용 분야에 적용될 수 있을 것으로 생각한다.