• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.62-72
• /
• 1998

This study was performed to characterize the trace organic pollutants in the industrial wastewater and to establish the database of the trace organic pollutants. The four manufacturing industries, which are refined petroleum, industrial chemicals, rubber & plastics and fabricated metals, were surveyed. The wastewater and discharging water of these 30 factories are analyzed to characterize the trace organic pollutants. In industrial chemicals, the kinds of products and organic pollutants are very various. Therefore to select the characteristic organic pollutants in this categories are also very difficult. In industrial chemicals, the gas chromatograpic peak patterns of wastewater are represented the various type according to their products, therefore the typical patterns of the characteristic organic pollutants could not be obtained because the kinds of manufactured goods and organic pollutants are very various. In refined petroleum, the effluent is discharged in the distillatory process of atmosphere pressure and contained the saturated hydrocarbons, phenol compounds, benzene compounds and naphtalene compounds. The saturated hydrocarbons peaks from $C_{15}$ to $C_{35}$ are represented the typical oil patterns by the uniform intervals therefore the peak can be easily distinguished. In rubber & plastics, the wastewater is discharged in the washing process which contains the additives. The problem of wastewater is not serious because the manufacturing process is not produced the effluent or the produced cooling water is recycled in that process.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.47-60
• /
• 2012

Video data comes in the form of the unstructured and the complex structure. As the importance of efficient management and retrieval for video data increases, studies on the video parsing based on the visual features contained in the video contents are researched to reconstruct video data as the meaningful structure. The early studies on video parsing are focused on splitting video data into shots, but detecting the shot boundary defined with the physical boundary does not cosider the semantic association of video data. Recently, studies on structuralizing video shots having the semantic association to the video scene defined with the semantic boundary by utilizing clustering methods are actively progressed. Previous studies on detecting the video scene try to detect video scenes by utilizing clustering algorithms based on the similarity measure between video shots mainly depended on color features. However, the correct identification of a video shot or scene and the detection of the gradual transitions such as dissolve, fade and wipe are difficult because color features of video data contain a noise and are abruptly changed due to the intervention of an unexpected object. In this paper, to solve these problems, we propose the Scene Detector by using Color histogram, corner Edge and Object color histogram (SDCEO) that clusters similar shots organizing same event based on visual features including the color histogram, the corner edge and the object color histogram to detect video scenes. The SDCEO is worthy of notice in a sense that it uses the edge feature with the color feature, and as a result, it effectively detects the gradual transitions as well as the abrupt transitions. The SDCEO consists of the Shot Bound Identifier and the Video Scene Detector. The Shot Bound Identifier is comprised of the Color Histogram Analysis step and the Corner Edge Analysis step. In the Color Histogram Analysis step, SDCEO uses the color histogram feature to organizing shot boundaries. The color histogram, recording the percentage of each quantized color among all pixels in a frame, are chosen for their good performance, as also reported in other work of content-based image and video analysis. To organize shot boundaries, SDCEO joins associated sequential frames into shot boundaries by measuring the similarity of the color histogram between frames. In the Corner Edge Analysis step, SDCEO identifies the final shot boundaries by using the corner edge feature. SDCEO detect associated shot boundaries comparing the corner edge feature between the last frame of previous shot boundary and the first frame of next shot boundary. In the Key-frame Extraction step, SDCEO compares each frame with all frames and measures the similarity by using histogram euclidean distance, and then select the frame the most similar with all frames contained in same shot boundary as the key-frame. Video Scene Detector clusters associated shots organizing same event by utilizing the hierarchical agglomerative clustering method based on the visual features including the color histogram and the object color histogram. After detecting video scenes, SDCEO organizes final video scene by repetitive clustering until the simiarity distance between shot boundaries less than the threshold h. In this paper, we construct the prototype of SDCEO and experiments are carried out with the baseline data that are manually constructed, and the experimental results that the precision of shot boundary detection is 93.3% and the precision of video scene detection is 83.3% are satisfactory.

• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.125-133
• /
• 2010

Objectives: Rapid polymerization of overlying composite resin causes high polymerization shrinkage stress at the adhesive layer. In order to alleviate the shrinkage stress, increasing the light intensity over the first 5 seconds was suggested as an exponential curing mode by an LED light curing unit (Elipar FreeLight2, 3M ESPE). In this study, the effectiveness of the exponential curing mode on reducing stress was evaluated with measuring microtensile bond strength of three adhesives after the overlying composite resin was polymerized with either continuous or exponential curing mode. Methods: Scotchbond Multipurpose Plus (MP, 3M ESPE), Single Bond 2 (SB, 3M ESPE), and Adper Prompt (AP, 3M ESPE) were applied onto the flat occlusal dentin of extracted human molar. The overlying hybrid composite (Denfil, Vericom, Korea) was cured under one of two exposing modes of the curing unit. At 48h from bonding, microtensile bond strength was measured at a crosshead speed of 1.0 mm/min. The fractured surfaces were observed under FE-SEM. Results: There was no statistically significant difference in the microtensile bond strengths of each adhesive between curing methods (Two-way ANOVA, p > 0.05). The microtensile bond strengths of MP and SB were significantly higher than that of AP (p < 0.05). Mixed failures were observed in most of the fractured surfaces, and differences in the failure mode were not observed among groups. Conclusion: The exponential curing method had no beneficial effect on the microtensile dentin bond strengths of three adhesives compared to continuous curing method.

• Radiation Oncology Journal
• /
• v.19 no.3
• /
• pp.245-251
• /
• 2001

Prupose : The genes involved on the suppression or radiation-induced apoptosis by genistein in K562 leukemia cell line was investigated. Materials and methods : K562 cells in exponential growth phase were irradiated with a linear accelerator at room temperature. For X-ray irradiation and drug treatment, cultures were prepared at $2\times10^5\;cells/mL$. The cells were irradiated with 10 Gy (Clinac 1800C, Varian, USA), Stock solutions of herbimycin A (HMA, Calbiochem, UK) and genistein (Calbiochem, UK) were prepared in dimethylsulfoxide (DMSO, Sigma, UK). After incubation at $37^{\circ}C$ for 24 h, PCR-select cDNA subtractive hybridization, dot hybridization, DNA sequencing and Northern hybridization were examined. Results : Smad6 gene was identified from the differentially expressed genes in K562 cells incubated with genistein which had been selected by PCR-select cDNA subtractive hybridization. The mRNA expression of Smad6 in K562 cells incubated with genistein was also higher than control group by Northern hybridization analysis. Conclusion : We have shown that Smad6 involved on the suppression of radiation-induced apoptosis by genistein in K562 leukemia cell line. It is plausible that the relationship between Smad6 and the suppression of radiation-induced apoptosis is essential for treatment development based on molecular targeting designed to modify radiation-induced apoptosis.

• Korean Journal of Weed Science
• /
• v.8 no.1
• /
• pp.53-58
• /
• 1988

This study was carried out to determine effect of butachlor [N.-(buthoxymethyl)-2-chloro-N-(2,6-diethylphenyl) acetamide] and bialaphos [2-amino-4(hydroxy)(methyl) phosphionyl] butyryl-alanylalanine sodium salt on the germination of tobacco seed, induction and growth of callus from tobacco. Further, fatty acids and ammonia content of tobacco calli were determined. Bialaphos had no effect on tobacco seed germination, but the growth of seedling was markedly affected by an application of 10 ppm bialaphos. However, regardless of varieties tested, tobacco seed germination was completely inhibited by $5{\times}10^{-5}M$ of butachlor. At an application of $5{\times}10^{-5}M$ butachlor, tobacco seeds were to some extent germinated and showed further growth. Hyangcho among varieties tested, showed the most tolerant response to butachlor. In induction of callus from various tobacco varieties and their growth, aromatic type of tobacco varieties exhibited the most tolerance against bialaphos. However, no distinct varietal differences were determined in the treatment of butachlor. The major fatty acids identified in tobacco calli were palmitic, oleic and linoleic acid. No marked difference in terms of fatty acids was observed among tobacco varieties used, but it was observed that there was the higher ratio of quantity in unsaturated fatty acids over saturated one, bialaphos treatment accumulated about 9 times higher ammonia content than that of the untreated control, giving an evidence that bialaphos might inhibit glutamine synthetase activity.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.78-83
• /
• 2014

In this research, we evaluated the performance and characteristics of carbon supported PtM (M = Ni and Y) alloy catalysts (PtM/Cs) synthesized by a modified polyol method. With the PtM/Cs employed as a catalyst for the oxygen reduction reaction (ORR) of cathodes in proton exchange membrane fuel cells (PEMFCs), their catalytic and ORR activities and electrical performance were investigated and compared with those of commercial Pt/C. Their particle sizes, particle distributions and electrochemically active surface areas (EAS) were measured by TEM and cyclic voltammetry (CV), while their ORR activity and electrical performance were explored using linear sweeping voltammetries with rotating disk electrodes and rotating ring-disk electrodes as well as PEMFC single cell tests. TEM and CV measurements show that PtM/Cs have the compatible particle size and EAS with Pt/C. When it comes to ORR activity, PtM/C showed the equivalent or better half-wave potential, kinetic current density, transferred electron number per oxygen molecule and $H_2O_2$ production(%) to or than commerical Pt/C. Based on results gained by the three electrode tests, when the PEMFC single cell tests were carried out, the current density measured at 0.6 V and maximum power density of PEMFC single cell adopting PtM/C catalysts were better than those adopting Pt/C catalyst. It is therefore concluded that PtM/C catalysts synthesized by modified polyol can result in the equivalent or better ORR catalytic capability and PEMFC performance to or than commercial Pt/C catalyst.

• Korean journal of food and cookery science
• /
• v.30 no.6
• /
• pp.670-678
• /
• 2014

The purpose of this study was to find the optimal swelling method and condition for seacucumber to improve its taste and texture to accomodate the rapid increase of consumption. Another purpose was to try to determine an easy way to soak dried sea-cucumber under different conditions, and identify the influence of swelling time on the texture of sea-cucumber, in order to reduce preparation time and provide basic data for easy handling. After boiling or steaming for six different periods including 5, 15, 30 and 60 minutes the texture of the sea-cucumbers were compared, For the additive test, the sea-cucumbers were boiling for 30 minutes period with 4 different additives and the textures were compared, Since the texture is an important characteristic of sea-cucumber, there are many variables that affect this property including the, drying and preservation methods. This study provides basic understanding of the influence of the heating method, time and temperature on the swelling of sea-cucumber for handy use at processing sites.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.361-364
• /
• 2002

This study was performed to establish a simple and accurate method for the determination of oxygen that is a processing aid in various beverage. The quantitative determination of dissolved oxygen (DO) contents in 30 cases of samples were performed by traditional titration method and polarography. As a result of the study, the analysis of DO contents in fruit-extract beverages containing oxygen by titration method was time consuming and large sample volumes were needed. Besides, serious interferences with compounds such as hydroxylamine and nitric oxide were observed, leading to false response. Although the polarography is easily affected by $H_2S$, proteins, and various organic compounds, it is a simple and practical method that provides inexpensive and relatively rapid analysis. The polarography is best suited to the routine determination of DO in a large number of samples and it is expected that the polarography can directly be applied to the quality control of the beverages containing added oxygen. The analysis results of DO contents in various fruit-extract beverages with oxygen and without oxygen were as follows: 23.10 ppm to 32.60 ppm for various frutis extract beverages with oxygen, 0.70 pp to 2.54 ppm for mixed beverages without oxygen, 7.63 ppm to 8.28 ppm for drinking water.

• Journal of Nutrition and Health
• /
• v.52 no.6
• /
• pp.540-551
• /
• 2019

Purpose: Dietary fiber is a component of carbohydrate that is linked closely with the carbohydrate quality, but few studies have investigated the association of high fiber intake with the cardiometabolic risk factors in Koreans. This study examined the association of high fiber and high carbohydrate intake with the cardiometabolic risk factors among Korean adults. Methods: This study included 15,095 adults aged ≥20 years, who participated in the 2013 ~ 2017 KNHANES. The dietary intake was obtained using a 24-h dietary recall method. The associations of high fiber and high carbohydrate intake with metabolic syndrome and dyslipidemia were examined by sex using multiple logistic regression analysis. Results: The median of dietary fiber was 23.6 g/day in men and 20.0 g/day in women. Dietary fiber intake increased gradually as dietary carbohydrate groups increased except for ≥80% of energy from the carbohydrate group. Women in the highest quintile of fiber intake showed a 33% lower risk of metabolic syndrome compared with those in the third quintile. When stratified into low fiber (LF) and high fiber (HF) groups using Adequate Intake of fiber for Koreans, men in the third quartile of carbohydrate intake showed a 44% and 51% higher risk of metabolic syndrome and atherogenic dyslipidemia than in the first quartile, respectively, but only in the LF group. Women in the second quartile of carbohydrate intake showed an 83% higher risk of hypercholesterolemia than in the first quartile in the LF group. On the other hand, as no significant association was observed between the carbohydrate intake and metabolic diseases among the HF groups in both sexes. Conclusion: These findings suggest that a high fiber intake might be associated with a reduced risk of metabolic syndrome and high carbohydrate intake with a low dietary fiber intake might be associated with an increased risk of several metabolic abnormalities among Korean adults. Further prospective studies will be needed to confirm the effects of high fiber and high carbohydrate intake on the cardiometabolic risk factors among Koreans.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.191-205
• /
• 1995

The carrier materials used for the development of bacterial inoculants to be effective in field were made with various carrier materials of two major forms, alginate bead and powder inoculants. Inoculants were prepared after mixing those carrier materials with Pseudomonas fluorescens SSL3 and Bacillus subtilis B5, and the treatment effects of each inoculants was investigated on cucumber, tomato, pepper and potato. Survival density of SSL3 and B5 in various carrier materials for duration of storage and the bead inoculants were better than the powder. In the powders, survival rate increased in carrier materials treated 5% skimilk. The growth condition of microorganisms in carrier materials is good at powder. When they were preserved in the long period, contamination is problem. Scanning(200 to 600nm) of the P. fluorescens SSL3 supernatant in centrifuged MKB broth incubated for 48h had two main peaks, pyochelin(300nm) and pyoverdin(400nm). The potato yield in field experiments of spring, treated with bead formulas showed increase of 22~29% in whole potato breeds as compared with control, because the bead formulas degraded, and released the antibiotic microorganisms in slow and constant rate. In the pot experiment, there were significant difference in soil, wheatbran, and bead formed wheatbran.