These experiments were carried out to examine the effect of rapid thawing (500$^{\circ}C$/min) on the survival of 8-cell mouse embryos cooled slowly (0.5-1$^{\circ}C$/min) to precooling temperatures between -10 and 070$^{\circ}C$ before direct transfer ofembryos to -196$^{\circ}C$, and to compare the survival of embroys thawed slowly (20$^{\circ}C$/min) and rapidly (500$^{\circ}C$/min) after in vitro culture. In addition, the sensitivity of 8-cell mouse embroys to the rate of addition and removal of cryoprotectant at room temperauture, and the effect of developing stages on the survival of embryos frozen-thawed slowly were investigated. The results obtained were summarized as follows: 1. Embryos were survived in rapid thawing (500$^{\circ}C$/min) only when slow cooling was terminated at relatively high subzero teperaure (-20 to -60$^{\circ}C$). The highest survival rate(77.0%) in in vitro culture of embryos thawed rapidly was obtaeined after transfer to -196$^{\circ}C$ from -40$^{\circ}C$. 2. For the survival of embryos in slow thawing (20$^{\circ}C$/min.), slow cooling to lower subzero temperature (-50$^{\circ}C$ and below) was required before transfer of embryos to -196$^{\circ}C$. These results indicate that embryos transferred to -196$^{\circ}C$ from high subzero temprature contain much interacellular ice to damage them during slow warming but to permit survival of embryos after rapid warming. 3. The Survival rate (72.7%) of 8-cell mouse embryos after rapid addition and removal of cryoprotectant, DMSO at room temperature was similar to that (83.9%) after slow addition and removal of cryoprotectant at same temperature. 4. The survival rates of 1-, 2-, 4- and 8-cell embryos frozen-thawed slowly were 26.7, 76.4, 70.0 and 83.9%, respectively.
건국대학교 축산대학 부설 양어장에서 사육중인 50마리의 무지개 송어 수컷에서 채취된 정액을 각각 1989년 12월부터 1990년 12월까지 $-20^{\circ}C$와 $-40^{\circ}C$에서 1년 1989년 12월부터 2월까지 2개월동안 $-196^{\circ}C$인 액체질소탱크내에서 그리고 1990년 12월부터 2월까지 $-20^{\circ}C,\;-40^{\circ}C,\;-70^{\circ}C$에서 2개월 동안 동결보존후, $-13^{\circ}C$ 냉수에 해동시켜 20분간 원심분리기에서 정자를 분리시킨 다음 Tyrode 용액으로 50배 정도 희석시킨 후의 정자의 생존율 및 운동성과 신선한 난자와 인공수정시킨 후의 수정률 및 부화율을 조사한 결과는 다음과 같다. 동결보존전과 해동후의 정자의 생존율을 비교해 볼 때 전반적으로 생존전과 큰 차이 없이 생존율이 높게 나타났다. 3가지의 항동해제로 동결보존시킨 후 해동된 정자가 포함된 희석액으로 인공수정시킨 후의 수정률은 모두 $99\%$ 이상으로서 이러한 수치는 $99\%$ 이상을 나타내는 대조구와 차이가 없었고, $-20^{\circ}C,\;-40^{\circ}C,\;-70^{\circ}C$\;-196^{\circ}C와 같이 서로 다른 온도에서도 수정률은 대조구와 큰 차이 없이 나타났다. 1M의 DMSO의 항동해제로 $-196^{\circ}C$에서 2개월 동안 동결보존시킨 후 해동된 정자가 포함된 희석액으로 인공수정시킨지 24일 이후의 수정률 및 부화율은 BSA가 포함된 희석액이 각자 $96\%$ 및 $8\%$ 이고, 포함되지 않은 희석액은 각각 $98\%,\;10\%\;$로서 BSA가 포함되지 않은 경우에서 부화율이 약간 높게 나타났다. 1M DMSO의 항동해제로 2개월동안 동종보존시킨 후 해동된 정자가 포함된 희석액으펄 인공수정 시킨지 24일 이후의 부화율은 각각 $-196^{\circ}C$에서 $10\%,\;-40^{\circ}C$에서 $34\%,\;-70^{\circ}C$에서 $35\%$로 나타났다. 1M의 methanol의 항동해제 동결보존시친 후 해동된 정자가 포함된 희석액으로 인공수정시킨지 24일 이후의 부화율은 각각 $-20^{\circ}C$에서 $22\%,\;-70^{\circ}C$에서 $28\%$로 나타났다. 1M glycerol의 항동해제로 동결보존시킨 후 해동된 정자가 포함된 희석액으로 인공수정시킨지 24일 이후의 부화율은 각각 $-20^{\circ}C$에서 $22\%,\;-70^{\circ}C$에서 $33\%$로 나타났다. 1.5M DMSO의 항동제로 2개월동안 동결보존 시킨 후 해동된 정자가 포함된 희석액으로 인공수정시킨지 24일 이후의 부화율은 각각 $-20^{\circ}C$에서 $27\%,\;-40^{\circ}C$에서 $36\%,\;-70^{\circ}C$에서 $35\%$로 나타났다. 1.5M glycerol의 항동해제로 2개월동안 동결보존시킨 후 해동된 정자가 포함된 희석액으로 인공수정시킨지 24일 이후의 부화율은 각각 $-20^{\circ}C$에서 $34\%,\;-40^{\circ}C$에서 $31\%,\;-70^{\circ}C$에서 $31\%$로 나타났다. 1.5M methane의 항동해제로 2개월동안 동결보존시킨후 해동된 정자가 포함된 희석액으로 인공수정시킨지 24일 이후의 부화율은 각각 $-20^{\circ}C$에서 $28\%-40^{\circ}C$에서 $29\%-70^{\circ}C$에서 $28\%$로 나타났다. 신선한 정자의 중편부는 2본의 중앙섬유소, 9본의 외측조대섬유, 미토콘드리아초로 구성되어 있다. 동결보존시 정자는 편모의 구부러짐, 정자경부의 핵막의 이탈, 핵내용물이 유출되는 손상을 입었다.
The effects of Ni and N addition to 304 stainless steel on mechanical properties and microstructure were investigated within temperature ranged from $-196^{\circ}C$ to $25^{\circ}C$. The addition of nickel and nitrogen induced the stability against the formation of provide significantly enhanced ductility at $-196^{\circ}C$ and reduce the Md temperature. Fe-18Cr-10Ni-0.2N alloy showed the ${\gamma}$ phase in deformed structure which it was beneficial to enhance the tensile strength and elongation at $25^{\circ}C$ and $-196^{\circ}C$.
향신료인 allspice(Pimenta dioica L.)를 액체배지에 첨가하여 2종류의 식중독세균(Escherichia coli 0157:H7과 Staphylococcus aureus 196E)의 증식과 저온저장중 생존에 미치는 항균효과를 조사하였다 저농도(0~2%, w/v)의 allspice를 함유한 tryptic soy broth(TSB)에 E. coli와 S. aureus를 $10^{5}$~$10^{6}$ cells/$m\ell$가 되게 접종하여 35$^{\circ}C$에서의 증식과 냉장(5$^{\circ}C$)및 냉동(-2$0^{\circ}C$)저장중 생존억제효과를 생균수의 변화로서 조사하였다. 35$^{\circ}C$에서의 E. coli 증식은 1%이내의 향신료 농도에서는 증식이 저해되지 않았으나, 2%의 allspice 존재하에서는 긴 유도기를 거친 후에 증식이 시작되었다. 35$^{\circ}C$에서의 S. aureus의 증식은 0.1%와 0.3%의 allspice 존재하에서는 긴 유도기를 거친 후에 증식이 시작되었으나 0.5~2%에서는 세균의 증식이 억제되어 사멸하였다. 5$^{\circ}C$에서 냉장한 경우에는 E. coli와 S aureus 모두 0.3%의 allspice에 의해 생존이 크게 억제되었으며 0.5%이상의 농도에서는 저장말기에 사멸하였다. -2$0^{\circ}C$에 동결저장하였을 때 E. coli는 저장기간이 길어질수록, 첨가한 향신료의 농도가 높을수록 생존 억제효과가 증대되었다. 동결저장중 S. aureus의 생균수는 저장초기에 급격히 감소한 후 거의 일정수준을 유지하였으며 첨가한 향신료의 농도에 따른 생균수의 차이는 나타나지 않았다. 동결저장에서 0.1%의 향신료를 첨가했을 때 E. coli와 S. aureus는 대조구의 생균수에 비해 1/100이하로 생균수가 감소하여 allspice는 우수한 항균효과를 나타내었다.다.
Cryogenic characteristics of austenitic stainless steel based on 304 steel with nickel and nitrogen were investigated at room temperature and $-196^{\circ}C$. The alloys were fabricated by vacuum arc furnace and cold working after homogenization treatment. The addition of nickel and nitrogen decreased the stability of $\delta$-ferrite and induced the stability against the formation of martensite to result significantly in enhancing ductility at $-196^{\circ}C$. Nitrogen reduced Md temperature, which was beneficial to the tensile strength and elongation at $25^{\circ}C$ and -196$^{\circ}C$.
This experiment was carried out to investigate effects of DMSO or ethylene glycol as a cryopotectant and of freezing methods on survival rate of forozen-thawed rat 2-cell embryos by morphological observation. 2-cell embryos were recovered from oviducts of Sprague Dawley females mated with males of same strain on day 2 of pregnancy after inducing superovulation by intrapertioneal injection of PMSG and HCG. In slow freezing and thawing groups, embryos were frozen to -79$^{\circ}C$ or -196$^{\circ}C$ in a glass test tube containing 0.2ml PBI with 1.5M DMSO or 1.2M ethylene glycol at a rate of 0.3-1.0C/min. and thawed slowly. When samples were frozen to -79$^{\circ}C$, higher survival rate was obtained in the medium containing DMSO (43.9%) than ethylene glycol (41%). And similar result was obtained (32.5% in DMSO vs. 31.4% in ethylene glycol) when samples were frozen. In rapid freezing and thawing groups, embryos were frozen to -79 or -196$^{\circ}C$ in a glass test tube containing 0.2ml of PBI with 1.5M DMSO or 1.2M ethylene glycol by rapid cooling, and thawed rapidly. When samples were frozen to -79$^{\circ}C$, 1.5M DMSO (13.2%) was more effective than 1.2M ethylene glycol (6.1%). When the storage temperature was -196$^{\circ}C$, survival rates were 9.8% in 1.5M and 5.4% in 1.2M ethylene glycol.
본 연구는 냉동연근의 최적 제조 공정을 위하여 수행하였다. 냉동 전처리로 blanching 하고, -20, -70, $-196^{\circ}C$ 각각 다른 냉동온도에서 동결한 냉동연근의 품질을 측정하였다. 최적 blanching 조건은 미생물 수, 물성, 총 페놀 함량, 관능평가 등의 결과를 바탕으로, $100^{\circ}C$에서 5분간 처리로 설정하였다. 여러 냉동조건에서 동결한 연근의 SEM 사진을 비교한 결과, $-20^{\circ}C$에서 동결한 연근의 조직이 가장 많이 파괴되었고 $-70^{\circ}C$에서 동결한 연근의 조직 단면 구조가 대조구와 가장 유사하였다. 항산화능은 동결 시 감소하는 경향을 나타냈고, 처리구간에 유의적인(p<0.05) 차이는 없었다. 총 페놀 함량은 모든 냉동연근에서 감소하는 경향을 보였는데 $-20^{\circ}C$에서 가장 낮았고, drip loss 또한 $-20^{\circ}C$에서 3.73%로 가장 높았다. 따라서 본 연구 결과, $-20^{\circ}C$에서의 일반적인 냉동보다는 gas nitrogen convection chamber에서 의 $-70^{\circ}C$로 동결하는 것이 고품질의 냉동연근을 생산할 수 있는 최적 냉동방법이라고 판단된다.
수출용 냉동딸기 제조 시 미생물학적 안전성 확보를 위한 수단으로 이산화염소수와 acetic acid 병합처리를 최적 비가열 전처리 기술로써 적용하여 -20, -70, $-196^{\circ}C$로 냉동한 후 미생물 수, 품질변화 및 관능평가를 조사하였다. 냉동방법 및 세척 처리에 따른 색도 차이는 나타나지 않았고, 비타민 C 함량은 $-70^{\circ}C$ 냉동에서 35.33 mg/100 g FW로 가장 대조구와 유사하였으며, drip loss도 $-70^{\circ}C$ 냉동이 14.39%로 가장 낮게 나타났다. 관능평가 역시 $-70^{\circ}C$ 냉동이 -20, $-196^{\circ}C$ 냉동보다 높은 점수를 받았으며, 세척처리는 비타민 C 함량, drip loss 및 관능평가에 큰 영향을 끼치지 않는 것으로 나타났다. 또한, 냉동딸기에 50 ppm 이산화염소수와 1% acetic acid를 병합 처리하여 냉동 후 미생물 수 변화를 측정한 결과, 냉동 전과 같이 병합처리 된 딸기 시료에서 미생물이 검출되지 않았다. 따라서 저장성이 높은 수출용 냉동딸기 생산을 위해서는 gas nitrogen convection chamber를 이용한 $-70^{\circ}C$에서의 급속냉동 처리가 보다 효과적인 냉동방법이며, 냉동 처리만으로는 미생물 제어가 어렵기 때문에 냉동 전 비가열 전처리를 통해서 냉동딸기의 미생물학적 안전성을 확보해야 한다고 판단된다.
In this study, the toughness was evaluated by using the instrumented Charpy impact testing procedures for A15083-O aluminum alloy used in the LNG carrying and storing tank. The specimens were GMAW welded with four different mixing shield gas ratios (Ar100%+He0%, Ar67%+He33%, Ar50%+He50%, and Ar33%+He67%), and tested at four different temperatures(+25, -30, -85, and -196$^{\circ}C$ ) in order to investigate the influence of the mixing shield gas ratio and the low temperature. The specimens were divided into base metal, weld metal, fusion line, and HAZ specimen according to the worked notch position. From experiment, the maximum load increased a little up to -85$^{\circ}C$, and the maximum load and maximum displacement were shown the highest and the lowest at -196$^{\circ}C$ than the other test temperatures. The absorption energy of weld metal notched specimens was not nearly depends on test temperature and mixing shield gas ratio because the casting structure was formed in weld metal zone. In the other hand, the others specimens was shown that the lower temperature, the higher absorption energy slightly up to -85$^{\circ}C$ but the energy was decreased so mush at -196$^{\circ}C$
Journal of Advanced Marine Engineering and Technology
/
제26권6호
/
pp.653-660
/
2002
In this study, the toughness was evaluated by using the instrumented Charpy impact testing procedures for A15083-O aluminum alloy used in the LNG carrying and storing tank. The specimens were GMAW welded with four different mixing shield gas ratios (Ar100%+He0%, Ar67%+He33%, Ar50%+He50%, and Ar33%+He67%), and tested at four different temperatures(+25, -30, -85, and $-196^{\circ}C$) in order to investigate the influence of the mixing shield gas ratio and the low temperature. The specimens were divided into base metal, weld metal, fusion line, and HAZ specimen according to the worked notch position. From experiment, the maximum load increased a little up to -$85^{\circ}C$ , and the maximum load and maximum displacement were shown the highest and the lowest at -$196^{\circ}C$ than the other test temperatures. The absorption energy of weld metal notched specimens was not nearly depends on test temperature and mixing shield gas ratio because the casting structure was formed in weld metal zone. In the other hand, the other specimens were shown that the lower temperature, the higher absorption energy slightly up to $-85^{\circ}C$ but the energy was decreased so mush at $-196^{\circ}C$.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.