• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.8 no.2
• /
• pp.139-150
• /
• 2022

Theranostics, a composite word of therapy and diagnosis, is known as personalized medicine and the concept of diagnosis and treatment at the same time. In nuclear medicine, it means performing both therapeutic and diagnostic radioisotope therapy using the same target molecule. The increased production and utilization of ⁶⁴Cu opens a new era of theranostics. The studies introduced here have shown that ⁶⁴CuCl₂ and various compounds or biomolecules labeled with ⁶⁴Cu are unique radiopharmaceuticals with physiological properties suitable for use as diagnostic and therapeutic agents. So far, these two abilities have been described only for radioactive iodine. Although ⁶⁴Cu has complex chemical properties compared to other PET radioisotopes such as ⁶⁸Ga, it has an appropriate half-life and enables high-quality PET images similar to ¹⁸F, which is an advantage in terms of diagnosis. In addition, since it also has therapeutic properties through the release of β^- particles and Auger electrons by electron capture, radiopharmaceuticals using ⁶⁴Cu stand for innovative radiopharmaceuticals for theranostic purposes. Therefore, based on the initial results obtained using ⁶⁴Cu as a therapeutic agent, it is expected that additional research on the application of ⁶⁴Cu will lead to a new era in the theranostics field.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.1
• /
• pp.60-67
• /
• 2020

In this study, copper (II) oxide powder for electroplating was prepared by recovering CuCl₂ from NaClO₃ type etching wastes via recovered non-sintering two step chemical reaction. In case of alkali copper carbonate [mCuCo₃·nCu(OH)₂], first reaction product, CuCo₃ is produced more than Cu(OH)₂ when the reaction molar ratio of sodium carbonate is low, since m is larger than n. As the reaction molar ratio of sodium carbonate increased, m is larger than n and Cu(OH)₂ was produced more than CuCO₃. In the case of m has same values as n, the optimum reaction mole ratio was 1.44 at the reaction temperature of 80℃ based on the theoretical copper content of 57.5 wt. %. The optimum amount of sodium hydroxide was 120 g at 80℃ for production of copper (II) oxide prepared by using basic copper carbonate product of first reaction. At this time, the yield of copper (II) oxide was 96.6 wt.%. Also, the chloride ion concentration was 9.7 mg/L. The properties of produced copper (II) oxide such as mean particle size, dissolution time for sulfuric acid, and repose angle were 19.5 mm, 64 second, and 34.8°, respectively. As a result of the hole filling test, it was found that the copper oxide (II) prepared with 120 g of sodium hydroxide, the optimum amount of basic hydroxide for copper carbonate, has a hole filling of 11.0 mm, which satisfies the general hole filling management range of 15 mm or less.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.4
• /
• pp.326-334
• /
• 2007

Purpose: The estrogen receptor (ER), which is over-expressed in ER-positive breast tumors, has been imaged by positron emission tomography (PET) using $[^{18}F]$ labeled estrogen ligands, especially $[^{18}F]FES$. However, $[^{18}F]$ has relatively short-lived half-life ($t_{1/2}$ =1.8 h) and the labeling yield of radio-fluorination is usually low compared with $^{64}Cu\;(t_{1/2}=12.7\;h)$. 1,4,7,10-tetraazacyclododecane (cyclen) is used to form stable metal complexes with copper, indium, gallium, and gadolinium. With these in mind, we prepared cyclen-based Cu complexes which mimic estradiol in aspect of two hydroxyl groups. Materials and Methods: 1.7-Protected cyclen, 1.7-bis (benzyloxycarbonyl)-cyclen was synthesized according to the reported procedure. After introducing two 4-benzyloxybenzyl groups at 4,10-positions, the benzyloxycarbonyl and benzyl groups were removed at the same time by hydrogenation on Pd/C to give 1,7-bis(4-hydroxybenzyl)-1,4,7,10-tetraazacyclododecane (1). Results: The prepared ligand 1 was fully characterized by $^1H,\;^{13}C$ NMR, and mass spectrometer. The synthesized ligand was reacted with copper chloride and copper perchlorate to give copper complexes $[Cu(1)]^{2+}2(CIO_4^-)\;and\;[Cu(1)Cl]^+Cl^-$ which were confirmed by high-resolution mass (FAB). Conclusion: We successfully synthesized a cyclen derivative of which two phenol groups are located on trans position of N-atoms. And, two Cu(ll) complexes of +2 and +1 overall charge, were prepared as a potential PET tracers for ER imaging.

• Microbiology and Biotechnology Letters
• /
• v.27 no.2
• /
• pp.129-135
• /
• 1999

EH-1 was highest at 9 days of incubation. This regrowth and enzymatic activity of Haloarcular sp. EH-1 was highest at 9 days of incubation. This amylase was purified by acetone fractionation, DEAG-Cellulose column chromatography, 1st Sephadex G-75 gel filtration, CM-Cellulose column chromatography and 2nd Sephadex G-75 gel filtration. The amylase was purified about 98.64 fold with a yield of 11.75%. The molecular weight of amylase was estimated to be about 43,000and 40,000 by gel filtration and SDS-polyacrylamide gel electrophoresis, respectively, suggesting that the enzyme was a monomer. Amylase had an optimal temperature of 4$0^{\circ}C$, and an optimum pH of 7.0, and the thermal stability was observed the above 50% at 10$0^{\circ}C$ after 1 hour, and the stable range of pH was 6.0 to 8.0. The enzymatic activity was increased in the presence of 10 mM 2-mercaptoethanol, slightly by 10 mM SnCl2.2H2O.FeCl2.4H2O.CuCl2.2H2O.HgCl2.6H2O and SDS. End products from soluble starch were glucose, maltose and maltotriose, and Km value for soluble starch was 2.5mg/ml.

• Clean Technology
• /
• v.19 no.4
• /
• pp.416-422
• /
• 2013

In environmental friendly aspects, the synthesis of glycerol carbonate from glycerol using carbon monoxide and oxygen gases which were produced in petrochemical plants was studied. The oxidative carbonylation of glycerol under batch reaction system was performed on parameter conditions such as effect of various metals (Cu, Pd, Fe, Sn, Zn, Cr), oxidizing agents, mole ratio of carbon monoxide to oxygen, catalyst amount, solvent types, reaction temperature and time and dehydrating agents. In particular copper chloride catalysts showed the excellent activities, and the glycerol carbonate yields over CuCl and $CuCl_2$ catalysts were the maximum of 44% and 64%, respectively at the following reaction conditions: solvent as nitrobenzene, mole ratio of 1:3:0.15 (glycerol:carbon monoxide:catalyst), mole ratio of 2:1 (carbon monoxide:oxygen), the total pressure of 30 bar at 413 K for 4 hr. It was found that reactivity were significantly different depending on the oxidation number of Cu catalysts, and oxygen plays an important role as oxidizing agents in producing H2O during oxidation reaction after carbonylation of glycerol.

• Analytical Science and Technology
• /
• v.25 no.3
• /
• pp.171-177
• /
• 2012

A determination method of aromatic amino acids such as trytophan (Trp), tyrosine (Tyr), and phenylalanine (Phe) using luminol-$H_2O_2$-Cu(II) system has been presented. In the presence of an aromatic amino acid, the enhanced chemiluminescence (CL) intensity of luminol-$H_2O_2$-Cu(II) system was obtained by forming a complex between Cu(II) and the amino acid. Based on the above phenomenon, a sensitive and fast determination of three aromatic amino acids was performed using the CL method in batch-type detection system. To optimize determination conditions, the kinetic influence of an aromatic amino acid on the luminol-$H_2O_2$-Cu(II) system and the effects of $H_2O_2$ and Cu(II) concentration, pH, and buffers were investigated. Under the optimized conditions, the calibration curve was linear over the range from $1.0{\times}10^{-6}$ to $2.0{\times}10^{-5}\;M$ for Trp, $1.0{\times}10^{-6}$ to $2.0{\times}10^{-5}\;M$ for Try, and $2.0{\times}10^{-6}$ to $2.0{\times}10^{-5}\;M$ for Phe, respectively. In this range, reproducibility (RSD, n = 4) of Trp, Try, and Phe were 3.21%, 2.64%, and 2.48%, respectively. The limit of detection ($3{\sigma}/s$) was calculated to be $6.8{\times}10^{-7}\;M$ for Trp, $5.7{\times}10^{-7}\;M$ for Try, and $9.6{\times}10^{-7}\;M$ for Phe.

• Korean Journal of Microbiology
• /
• v.44 no.3
• /
• pp.169-177
• /
• 2008

Global gene expression of Deinococcus radiodurans, a highly radiation resistant bacterium, in response to excess copper was analyzed by using oligonucleotide microarray chip. Among 3,187 open reading frames of D. radiodurans, seventy genes showed a statistically significant expression ratio of at least 2-fold changes under growth conditions of excess copper; 64 genes were induced and 6 genes were reduced. Especially, two operons ($DRB0014{\sim}DRB0017$ and $DRB0125{\sim}DRB0121$) presumably involved in the iron transport and utilization were the most highly induced genes by excess copper. A quantitative real-time PCR assay revealed that DRB00l4 and DRB0125 are highly transcribed responding to excess copper and 2,2'-dipyridyl, an iron chelator. In addition, the transcription of both genes was not changed by excess iron and bathocuproine disulphonate, a copper chelator. These results suggested that the copper metabolism may be closely connected with the iron transport and utilization in D. radiodurans. However, the disruption of each gene, DRB00l4 and DRB0125, did not affect the copper and radiation resistance, the most well-known character of this organism.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.2
• /
• pp.60-64
• /
• 2005

The ICP-CVD (inductively coupled plasma chemical vapor deposition) process was applied to the deposition of $TiB_2$ films. For plasma generation, 13.56 MHz r.f. power was supplied to 2-turn Cu coil placed inside chamber. And the gas mixture of $TiCl_4,\;BCl_3,\;H_2$ and Ar was used for $TiB_2$ deposition. $TiB_2$ films with high hardness (<40 GPa) were obtained at extremely low deposition temperature $(250^{\circ}C)$, and the films hardness increased with ICP power and gas flow ratio of $TiCl_4/BCl_3$. The film structure was changed from (100) preferred orientation to random orientation with increasing RF power. It is supposed that the enhanced hardness of films was caused by a strong Ti-B chemical bonding of stoichiometric $TiB_2$ films and film densification induced by high density plasma.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.1
• /
• pp.7-12
• /
• 2010

To determine the optimal isolation conditions of the entomopathogenic fungi from soil, we compared their growth characteristics with non-entomopathogenic fungi on agar media containing various concentrations of cooper (II) chloride ($CuCl_2$) or dodine. The result showed that dodine medium is more selective, and the optimal concentration of dodine is determined with $50{\mu}g$/ml. We could isolate several putative entomopathogenic fungi from soil using this, and identify them using ITS analysis. As a result, 64% fungi were identified as typical entomopathogenic fungi. This selective medium may be useful to the rapid and simple isolation of entomopathogenic fungi from soil.

• Korean Journal of Environmental Biology
• /
• v.28 no.2
• /
• pp.64-68
• /
• 2010

The mosquito, Aedes albopictus is important vector of humen phatogen such as dengue fever. And Aedes albopictus has widly distribution in oriental regions. This study was conducted to investigate the biological effects of cooper on the development of the Asian tiger mosquitoes, Aedes albopictus (Skuse). Aedes albopictus was affected with pupation ratios, mortalities, and wing lengths of the 3th and 4th instars by exposure to different concentration $CuCl_2$ (0.0, 2.5, 25.0 and 50.0 ppm) for 24 h and 48 h depending on dose and exposure period. The lowest $LC_{50}$ (median lethal concentration) value of $CuCl_2$ was 18.1 ppm at the 3rd instars for 48 h exposure. The pupation ratio of the larvae exposed at 50.0 ppm for 48 h was 14% which was much lower than those exposed to other treatment groups Changes of adult wing length showed significant decreased by Cu treatment. In conclusion, the most prominent effects of high concentration and longer exposure period were to reduce in the survival and pupation rates of larvae and wing length of Ae. albopictus.