• 전기의세계
• /
• v.20 no.2
• /
• pp.9-14
• /
• 1971

N type single crystal CdTe is grown by doping Gallium as 0.01 percent, by using zone melting method. And also p type CdTe is grown by doping Ag, Sb, and Te as 0.01%. Resistivity and Concentration of the n.p type single crystal are measured. And then Li ions are implanted on the n type CdTe by high voltage accellerator with different amount of impurity. Indium is evaporated on the p type in high vacuum condition. These sample are heated so as to make P-N Junction in Argon gas flow. Electrical properties for solar cell are investigated. Photovoltage and current are found to be varyed according to following factor: 1) amount of impurity 2) diffusion thickness 3) temperature and time for making P-N junction. Efficiency of the P-N Junction evaporated Indium is 6.5 when it is heated at 380.deg. C for 15 minutie.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.475-481
• /
• 2007

A total of 40 Korean native pigs (gilt 21, boar 19) were used to investigate the meat quality, nutritional and sensory properties by gender. Gilts had significantly lower moisture and ash contents (%) than boars, but protein contents were not significantly different between the gender (p<0.05). Gilts contained high intramuscular fat contents were significantly lower in Warner-Bratzler shear force (WBS) and Water holding capacity (WHC) when compared to those of boars. There was no significant difference in meat color L (lightness) and a (redness) values between the gender (p>0.05), but gilt had higher b (yellowiness) values than boar. Regarding amino acid compositions, there were glutamic acid (3.25%), aspartic acid (1.94%) lysine (1.83%), leucine (1.77%), alanine (1.17%) and arginine (1.15%) for gilts and boars. There were no significant differences in the contents of the minerals such as calcium, potassium, phosphorous, sodium, magnesium, iron, zinc and copper (p>0.05). The results of fatty acid composition showed that gilts had significantly higher C16:1n7, C18:1n9, in intramuscular fat., whereas they had significantly higher contents of C14:0, C16:0, C20:1n9, C20:5n3 in subcutaneous fat than boars (p<0.05). Boars had significantly higher contents of C18:0, C18:1n7, C18:2n6, C20:1n9, C20:4n6, C22:4n6 in intramuscular fat and they had significantly higher contents of C18:2n6, C22:4n6 than gilts in subcutaneous fat (p<0.05). In sensory evaluation, gilts had significantly higher scores in juiciness, tenderness and flavor when compared to boars (p<0.05).

• Journal of Chest Surgery
• /
• v.31 no.12
• /
• pp.1127-1133
• /
• 1998

Background: There are no ideal substitutes for tracheal replacement. Therefore we investigated the possibility of clinical use of cryopreserved tracheal homograft with special interest in the viability and rejection of the epithelial cell and cartilage. Material and Method: Rabbit's trachea was sected and stored in liquid nitrogen tank for 1 month. Tracheal replacement was done in 45 rabbits with autograft(n=15, Group 1), fresh allograft(n=15, Group 2) and cryopreserved homograft(n=15, Group 3). After 7, 14, and 30 days, 5 rabbits in each group were sacrificed and the regeneration of epithelium and cartilage and the degree of rejection were assessed by counting the monocellular infiltration. Result: Investigation at day 7, showed no difference in epithelial regeneration, however, at days 14 and 30, Group 1 showed better regeneration of epithelium than groups 2 and 3. There was no difference of epithelial regeneration between group 2 and 3. There was little rejection at day 7, but at days 14 and 30, there was significant rejection in group 2 and group 3.(P<0.05). Group 3 showed lesser rejection than group 2 at days 14 and 30, but it was not statistically significant. Cartilage showed no rejection and maintained its viability in groups 2 and 3. Conclusion: Cryopreserved tracheal homograft can maintain its viability, therefore it may represent a possibility of clinical application for tracheal replacement. However, cryopreservation can not eliminate the antigenicity of the trachea completely. Furthere studies for lowering the antigenicity and rejection should be performed for an ideal substitute for tracheal replacement.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.10
• /
• pp.1432-1442
• /
• 2016

The objective of this study was to determine the effect of palm and/or linseed oil (LSO) supplementation on carcass quality, sensory evaluation and fatty acid profile of beef from crossbred Wagyu beef steers. Twenty four fattening Wagyu crossbred beef steers (50% Wagyu), averaging $640{\pm}18kg$ live weight (LW) and approximately 30 mo old, were stratified and randomly assigned in completely randomized design into 3 treatment groups. All steers were fed approximately 7 kg/d of 14% crude protein concentrate with ad libitum rice straw and had free access to clean water and were individually housed in a free-stall unit. The treatments were i) control concentrate plus 200 g/d of palm oil; ii) control concentrate plus 100 g/d of palm oil and 100 g/d of LSO, iii) control concentrate plus 200 g/d of LSO. This present study demonstrated that supplementation of LSO rich in C18:3n-3 did not influence feed intakes, LW changes, carcass and muscle characteristics, sensory and physical properties. LSO increased C18:3n-3, C22:6n-3, and n-3 polyunsaturated fatty acids (PUFA), however, it decreased C18:1t-11, C18:2n-6, cis-9, trans-11, and trans-10,cis-12 conjugated linoleic acids, n-6 PUFA and n-6:n-3 ratio in Longissimus dorsi and Semimembranosus muscles.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.4
• /
• pp.71-82
• /
• 1979

Transparent vinyl-mulching cultivation plots heavy-fertilized (6-14-20 kg $10a^{-1}\; of\; N-P_2O_5-K_2O)$ in growing peanuts produced 315-344Kg $10a^{-1}$ of quality kernels through improvement of the low temperature conditions of underground environment during the early growing stage and kernel-filling stage. The yields of which were 82-99 percent higher than that of conventional cultivation plot. The vinyl-mulching cultivation techniques accelerated emergence, young seedling growth, flowering, pod bearing and kernel filling of peanuts in Korea.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.131-131
• /
• 2008

Silicon carbide (SiC) has attracted significant attention for high frequency, high temperature and high power devices due to its superior properties such as the large band gap, high breakdown electric field, high saturation velocity and high thermal conductivity. We performed Al ion implantation processes on n-type 4H-SiC substrate using a SILVACO ATHENA numerical simulator. The ion implantation model used a Monte-Carlo method. We studied the effect of channeling by Al implantation simulation in both 0 off-axis and 8 off-axis n-type 4H-SiC substrate. We have investigated the Al distribution in 4H-SiC through the variation of the implantation energies and the corresponding ratio of the doses. The implantation energies controlled 40, 60, 80, 100 and 120 keV and the implantation doses varied from $2\times10^{14}$ to $1\times10^{15}cm^{-2}$. In the simulation results, the Al ion distribution was deeper as increasing implantation energy and the doping level increased as increasing implantation doses. After the post-implantation annealing, the electrical properties of Al-implanted p-n junction diode were investigated by SILV ACO ATLAS numerical simulator.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.266-270
• /
• 2005

The effect of the weight ratio of carbon source to nitrogen source on the growth and the composition change of fatty acids of Thraustochytrium aureum ATCC 34304 was investigated. The cell concentration of 5 days' culture increased and then decreased according to the increase of C/N, The ratioes for the maximum biomass were unique respectively and distributed between 1 and 4 with the initial sugar concentration in the range of 5 g/L to 25 g/L. The biomass yield, $Y_{x/s}$ decreased along with the increase of C/N, but maintained a constant value 0.35 between 10 and 20. The composition of myristic acid $(C_{14:0})$, one component of the lipid synthesized by T. aureum, was not affected with the change of C/N, but the composition of palmitic acid $(C_{16:0})$ was around $20\%$ below 4 of C/N and decreased to $15\%$ according to C/N about 4. The compositions of oleic acid $(C_{18:1})$ and linoleic acid $(C_{18:2})$ increased from 0 to $20\%\;and\;7\%$ respectively. The composition of $\gamma-linoleic$ acid $(C_{18:3})$, however, reduced from $5\%\;to\;2\%$. EPA $(C_{20:5})$ and DPA $(C_{22:5})$ showed a tendency of reduction in the weight composition according to the increase of C/N, but DHA $(C_{22:6})$ had a trend maintaining an approximately constant value, around $40\%$, irrespective of the change of C/N.

• Applied Biological Chemistry
• /
• v.40 no.1
• /
• pp.53-57
• /
• 1997

The rate of hydrolysis of insecticidal 1-(6-chloro-3-pyridylmethyl) -2-nitro-iminoimidazolidine (common name; imidacloprid) have been investigated in 15%(v/v) aqueous dioxane at $45^{\circ}C$. From the kinetics and non-kinetics data such as pH-effect, solvent effect(m=0.04, n=0.30 IT m<${\Delta}H^{\neq}=16.14kcal{\cdot}mol^{-1}\;&\;{\Delta}S^{\neq}=-0.03e.u.$), rate equation ($k_{obs.}=4.56{\times}10^{-3}[OH^-]$) and analysis of hydrolysis product, 1-(6-chloro-3-pyridylmethyl-2)-imidazolidinon, the hydrolysis mechanism of imidacloprid is proposed that the specific base catalyzed hydrolysis($K_{OH^-}$) through nucleophilic addition-elimination ($Ad_N-E$) mechanism proceed via intermediate, 1-(6-chloro-3- pyridylmethyl)-2-hydroxy-2-imidazolidinylisonitraminate (I) and ${\beta}$-3-(6-chloro-3-pyridylmethyl)aminoethyl-1-nitrourea(III). And the half-life(t1/2) of hydrolytic degradation at pH 8.0 and $45^{\circ}C$ was about 4.5 months.

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.62-67
• /
• 2012

A series of homo binuclear complexs of the type $[M_2(L/L^')(NO_3)n].mH_2O$, [where $M=U{O_2}^{2+},\;Th^{4+},\;ZrO^{2+}$] and $[(VO)_2(L/L^')(SO_4)_2]{\cdot}2H_2O$, L=1,5,6,9,12,15,16,20 octaaza-7,813,14-tetraphenyl-2,4,17,19-tetramethyl-1,4,6,8,12,14,16,19-docosaoctene (OTTDO) or L'=10:11;21:22-dibenzo-1,5,6,9,12,15,16,20-octaaza-7,813,14-tetraphenyl-2,4,17,19-tetramethyl-1,4,6,8,12,14,16,19-docosaoctene (DOTTOT), n=4 for $U{O_2}^{2+}$, $ZrO^{2+}$ n=8 for $Th^{4+}$ m=1,2,3 respectively, have been synthesized in template method from ethylenediamine/orthophenylene diamine, benzil monohydrazone and acetyl acetone and characterized on the basis of elemental analysis, thermal analysis, molar conductivity, magnetic moment, electronic, infrared, $^1H$-NMR studies. The results indicate that the VO(IV) ion is penta co-ordinated yielding paramagnetic complexes; $UO_2(VI)$, ZrO(IV) ions are hexa co-ordinated where as Th(IV) ion is octa co-ordinated yielding diamagnetic complexes of above composition. The fungi toxicity of the ZrO(IV) and VO(IV) complexes against some fungal pathogen has been studied.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.78-83
• /
• 2012

The electrophoretic deposition(EPD) of ZnO nano-sized colloids is investigated by changing the colloid number concentration, applied force, and deposition time. The change of the colloid size in a suspension was examined by the different colloid number concentrations (N = $3.98{\times}10^{15}$, N = $3.98{\times}10^{14}$, and N = $3.98{\times}10^{13}$) with an increase of the deposition time and applied forces. Deposition behavior was investigated by changing the applied fields (from DC 5 V to 50 V) and the deposition time (5 min to 25 min). The surface microstructures of the as-deposited films were investigated by SEM. The dried films were sintered from $850^{\circ}C$ to $1,050^{\circ}C$ for 2 h and then the microstructures were also explored by SEM. The agglomeration rate was enhanced by increasing the colloid number concentration of colloids. Colloid number concentration in a suspension must be rapidly decreased at higher values of the electric field. ZnO nano-sized colloids had the highest zeta potential value of over -28 mV in methanol. A homogeneous microstructure was obtained at colloid number concentration of N = $3.98{\times}10^{13}$, applied DC field of 5 V/cm and 15 min of deposition time at an electrode distance of 1.5 cm. Under these conditions, the deposited films were sintered at $850^{\circ}C$ and $1,050^{\circ}C$ for 2 h. The results show a typical pore-free surface morphology of a uniform thickness of 400 nm under these experimental conditions.