• 한국대기환경학회지
• /
• 제12권4호
• /
• pp.389-398
• /
• 1996

In order to understand the relative importance of various pathways leading to the production and transformation of aerosols under different atmospheric conditions, the behavior of atmospheric aerosols have been investigated using a high volume tape sample in Seoul for a week period during August 1990. The concentrations of anion $(SO^{2-}_4, NO^-_3, CI^-)$ and cation $(Ca^{2+}, Na^+, NH^+_4)$ species of aerosol samples were analyzed to identify the ionic composition of aerosols and to estimate their relative contributions to aerosol formation. The concentrations of aerosol species were calculated by a multiple regression model. The results of our calculations indicate the existence of various chemical species such as $(NH_4)_2SO_4, Na_2SO_4, CaSO_4, NH_4NO_3, NaNO_3, Ca(NO_3)_2, NH_4Cl$, and NaCl salts. According to our calculations, the most dominant species of aerosol was $(NH_4)_2SO_4$ with the mean concentration of 23.3 $/mu g/m^3$ (66.9%). The proportion of different componts with aerosol (e.g., $NH_4NO_3$ and $NH_4Cl$) was strongly affected by temperature, relative humidity, and partial presure of gases.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.498-506
• /
• 2016

Electrochemical measurement using a LSCF6428 electrode was performed to estimate the oxygen potential gradient in the electrode layer and a long time stability test was performed by applied potential to learn the overpotential effect on the LSCF6428 electrode. By fitting the observed impedance spectra, it was obtained that the amount of faradic current decreased with distance from cathode/electrolyte interface. Oxygen potential gradient was estimated to occur within 1 um region from the cathode/electrolyte interface at an oxygen partial pressure of 10-1 bar. The segregation of cation rich phases in the LSCF6428 electrode suggests that kinetic decomposition took place. However, impedance response after applying the potential showed no changes in the electrode compared with before applying potential. The obtained results suggest that segregation of a secondary phase in a LSCF6428 cathode is not related to performance degradation for solid oxide fuel cells (SOFCs).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 전기설비
• /
• pp.76-78
• /
• 2005

Moisture contents measurement is frequently used as one of parameters for degradation diagnosis of transformer insulation. In general Karl-Fisher method is mainly used for moisture contents till now. But this method is inconvenient because of dismounting transformer for sampling oil or paper, and also partial sampling. At latest Recovery Voltage Method(RVM) is noticed for complement of this method. RVM can directly estimate moisture contents of transformer insulations in field without dismounting transformer. In this paper the accelerated aging process of oil-paper samples have been investigated at a temperature up to 140$^{\circ}C$ for 500 hours. The oil-paper insulation samples have been measured at intervals of 100 hours. Next to, we have estimated moisture contents using both Karl-Fisher Titration Method and RVM. And we have compared with Karl-Fisher Titration Method and RVM for estimating moisture contents. At last we have verified reliability of RVM which is new measurement method.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.200-204
• /
• 2008

비대칭성 고리형 지방족 아민 경화제를 이용한 diglycidyl ether of bisphenol F(DGEBF) 계열의 에폭시의 경화 반응을 등온 및 동적 경화 실험을 통하여 분석하였다. 등온 부분경화 실험 및 동적 경화반응을 통하여 아민 경화제의 비대칭성으로 인해 경화 반응이 저온부 및 고온부분의 두 가지 반응으로 구성되어 있다는 것을 확인하였고, 따라서 경화도가 0.6 이상인 영역에서는 등온경화반응 모델식을 이용하여 실험값을 예측하기는 어렵다는 것을 확인하였다. 승온 속도를 여러 가지로 변화시키며 동적 경화반응을 분석하여 저온부 및 고온부 각각의 반응에 대한 활성화에너지 및 속도상수를 알아보았고, 경화 초기에는 저온부의 반응이 주가 되는 것을 확인하였다.

• Smart Structures and Systems
• /
• 제14권2호
• /
• pp.191-207
• /
• 2014

In this research, an internal model based method is proposed to estimate the structural displacements and velocities under ambient excitation using only acceleration measurements. The structural response is assumed to be within the linear range. The excitation is assumed to be with zero mean and relatively broad bandwidth such that at least one of the fundamental modes of the structure is excited and dominates in the response. Using the structural modal parameters and partial knowledge of the bandwidth of the excitation, the internal models of the structure and the excitation can be respectively established, which can be used to form an autonomous state-space representation of the system. It is shown that structural displacements, velocities, and accelerations are the states of such a system, and it is fully observable when the measured output contains structural accelerations only. Reliable estimates of structural displacements and velocities are obtained using the standard Kalman filtering technique. The effectiveness and robustness of the proposed method has been demonstrated and evaluated via numerical simulations on an eight-story lumped mass model and experimental data of a three-story frame excited by the ground accelerations of actual earthquake records.

• 조명전기설비학회논문지
• /
• 제27권9호
• /
• pp.6-14
• /
• 2013

The position of the light source, illuminance distribution, and color temperature were evaluated in each lighting environment for the three main activities in a living room - 'watching TV,' 'reading' and 'relaxing.' In 'watching TV', the experiment was done to estimate the degree of comfort felt by the subjects when they watch static video and moving video, respectably, with different ambient brightness, with or without partial lighting above the TV set, and with different color temperatures. In 'reading', the comfortableness was estimated by the illuminance ratio of the ambient lighting to the lighting for reading and by the difference in color temperature. And in 'relaxing', the comfortableness was estimated by means of the ambient brightness, use/no use of a relaxing lamp, and color temperature. This experiment determined the general satisfaction for each visual act and the optimum lighting environment to reduce glare.

• 정보처리학회논문지B
• /
• 제13B권2호
• /
• pp.115-120
• /
• 2006

이 논문에서 겹쳐지고 잘린 이미지내의 타원형 객체들 가운데 부분적으로 겹쳐져 보이지 않는 외형과 영역을 재구성하고 계산하기 위한 방법을 제안한다. 대칭적인 속성에 기반을 두고, 불완전한 객체 인식을 위해 타원형 객체의 윤곽에 기반을 둔 방법이다. 이 방법은 한 객체 안에서 대칭 축을 이용하는 영역 복사를 통한 겹쳐져 보이지 않는 영역을 재구성하는 간결한 기교를 제공한다. 부분적으로 겹쳐져 보이지 않는 영역에 대한 측정된 변수에 기반을 두고, 분류 트리의 객체 인지를 수행하는데, 이 방법은 통계 수치보다 대칭에 기반을 둔 객체 재구성에 의존하기 때문이다. 이는 크기 변경과, 객체의 자세, 회전, 등에서 비록 객체 자세에는 한계를 가지고 있지만 부분적으로 겹쳐져 보이지 않는 객체의 인지에서 탁월하다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.355-364
• /
• 2021

The main objective of this study is to examine the interactive effect of technology spillover channels on business efficiency within the case study of manufacturing industry of Vietnam during the period from 2012 to 2018. The research model was developed with business efficiency as dependent variable and the relevant factors affecting the technology spillover capacity as independent variables. With a sample of 2,776 cross-sectional enterprises, panel data analysis approach was adopted to estimate the impact of technology spillover issue. Different spillover channels were also included in the analysis to enhance the empirical result. The study reveals that technology spillovers positively influence manufacturing business efficiency, in which horizontal spillover channel produces negative impact and vertical spillover channel, creates positive impact. Several factors that negatively affect the technology spillover capacity of businesses could be mentioned such as limited skills and experiences of workers, methods of implementing R&D, and the existence of FDI enterprises. Meanwhile, the rise of other factors related to joint-venture activities can help to increase the technology spillover capacity of businesses. In addition, skill and experience transfer makes a partial impact since this variable only positively affect the vertical spillover channel and provide no evidence of impact regarding horizontal spillover channel model.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제25권4호
• /
• pp.196-220
• /
• 2021

This study formulates a new geometric parameterization scheme to effectively address numerical analysis subject to the variation of the fiber radius of a square unit cell. In particular, the proposed mesh-morphing approach may lead to a parameterized weak form whose bilinear and linear forms are affine in the geometric parameter of interest, i.e. the fiber radius. As a result, we may certify the reduced basis analysis of a square unit cell model for any parameters in a predetermined parameter domain with a rigorous a posteriori error bound. To demonstrate the utility of the proposed geometric parameterization, we consider a two-dimensional, steady-state heat conduction analysis dependent on two parameters: a fiber radius and a thermal conductivity. For rapid yet rigorous a posteriori error evaluation, we estimate a lower bound of a coercivity constant via the min-θ method as well as the successive constraint method. Compared to the corresponding finite element analysis, the constructed reduced basis analysis may yield nearly the same solution at a computational speed about 29 times faster on average. In conclusion, the proposed geometric parameterization scheme is conducive for accurate yet efficient reduced basis analysis.

• 대한조선학회논문집
• /
• 제55권6호
• /
• pp.482-489
• /
• 2018

Most of the numerical and experimental studies on supercavitating flows are focused on the cavitator only. However, the partial cavity growing into the supercavity is affected by the shape of the body placed behind the cavitator. In this paper, we develope a numerical method which is based on the boundary element method to predict supercavitating flow around three-dimensional axisymmetric bodies. We estimate the influence of the body shape on the supercavity growth. Here, we consider various parameters of the body such as cavitator shape, shoulder length and body diameter, and compare the results with the case of the cavitator only. In summary, it is found that the body may impede the cavity growth, the shoulder mainly affects the cavity length, and the supercavity occurring in the cone type cavitator is strongly influenced rather than that of the disk type cavitator.