• 한국의학물리학회지:의학물리
• /
• 제25권3호
• /
• pp.123-127
• /
• 2014

Cs-137 방사선 조사기는 방사선생물 연구 분야에서 시료에 방사선 조사장치로 널리 사용되고 있다. 이러한 방사선 조사기 사용에 있어 시료에 조사되는 흡수선량의 평가는 향상된 연구 결과를 얻기 위하여 중요하다. 국제원자력기구의 TRS-277 또는 TRS-398 같은 선량측정 프로토콜은 이러한 목적에 적합하다. 그러나 현재 가장 실용적인 선량측정 프로토콜로 알려진 TRS-398의 경우에 Cs-137 선원에 대한 선질인자가 제공되지 않는 단점이 있다. 본 연구에서는 이전에 보고된 고에너지 방사선치료용 광자선에 대한 계산방법을 이용하여 Cs-137 선원의 선질인자를 결정하였으며 15종의 파머형 전리함에 대하여 선질인자를 결정하였다. 결과로서 대상전리함에 대한 Cs-137 선원에서 선질인자는 0.998에서 1.002 범위를 보였다. 이 결과는 Cs-137 선원을 사용하는 분야에서 물흡수선량 측정과 선량계의 교정에 유용하게 사용할 수 있을 것으로 본다.

• 한국축산식품학회지
• /
• 제29권5호
• /
• pp.573-578
• /
• 2009

This study examined the effect of gamma irradiation on shelf-life extension and sensory characteristics of dak-galbi. Commercial dak-galbi sauce was gamma-irradiated at 0, 5, 10, 15, 20, 25, and 30 kGy. The dak-galbi sauce (200 g) was then added to diced chicken (800 g) for cooking, and the cooked dak-galbi samples in vacuum bags were stored at $35^{\circ}C$ for 5 d. Dak-galbi samples were analyzed on d 0, 1, 2, 3, 4, and 5 for microbial analysis (plate count agar), thiobarbituric acid (TBARS) and volatile basic nitrogen (VBN) measurements, and on d 0 for sensory evaluation. On d 0, total bacterial populations were below detection limit after dak-galbi marinated with the gamma-irradiated (${\geq}15\;kGy$) sauces were cooked, and the samples marinated with higher dose irradiated dak-galbi sauce had lower (p<0.05) bacterial populations during storage. TBARS values of the dak-galbi samples marinated with non-irradiated sauce were not different ($p{\geq}0.05$) with those marinated with irradiated sauces on d 0, and the TBARS values increased (p<0.05) during storage at $35^{\circ}C$, regardless of irradiation dose. In the VBN analysis, there was no difference ($p{\geq}0.05$) in VBN values among irradiation doses on d 0, but VBN values decreased (p<0.05) as irradiation dose increased during storage. Moreover, there were no significant differences ($p{\geq}0.05$) in sensory characteristics among irradiation doses. These results indicate that use of gamma irradiation on dak-galbi sauce may be useful in shelf-life extension without compromising the sensory characteristics of dak-galbi.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1994년도 춘계학술대회 and 제3회 신약개발 연구발표회
• /
• pp.186-186
• /
• 1994

Many agonists have been known to activate the hydrolysis of membrane phospholipids through the bindings with corresponding receptors on the various cells. Diacylglycerol and inositol 1,4,5-trisphosphate(IP3) generated by the action of phosphoinositide-specific phospholipase C (PI-PLC) are well known second messengers for the activation of protein kinase C and the mobilization of Ca2+ in many cells. Three types of PI-PLC isozyme (${\alpha}$,${\gamma}$, and $\delta$) and several subtrpes for each type have been identified from mammalian sources by purification of enzymes and cloning of their cDNAs. Each type PI-PLC isozyme is coupled to different receptors and mediators, for example, ${\beta}$-types are coupled to the seven-transmembrane-receptors via Gq family of G-proteins and ${\beta}$-types directly to the receptor tyrosine kinases. Specific modulators for the signaling pathway through each type of PI-PLC should be very useful as potential potential candidates for lend substances in developing novel drugs. To establish the sensitive and convenient screening systems for searching modulators on PI-PLC mediated signaling, two kinds of approaches have been tried. (1) Establishment of in vitro assay condition for each type of PI-PLC isozyme: Overexpression by using vaccinia virus and purification of each isozyme was carried out for the preparation of large amounts of enaymes. Optimum and sensitive assay condition for the measurements of PI-ELC activities were established. (2) Development of the cell lines in which each type of PI-PLC is permanently overexpressed: A fibroblast cell line (3T3${\gamma}$1-7) in which PI-PLC-${\gamma}$1 was overexpressed by using pZip-neo expression vector was developed and used for the measurement of PDGF-induced IP3 formation. The responses for IP3 formed in 3T3${\gamma}$1-7 cells by the treatment of PDGF is 8 times more sensitive than those in control cells. 3T3${\gamma}$l-7 cell is useful for the screening of the inhibitors on the PDGF-induced cellular responses from large number of samples in a small volume(50 ${\mu}$l) and short time(5-15 min). Using these systems, we screened hundreds of herb-extracts for the inhibition of PDGF-induced IP3 formation and selected several extracts that showed the inhibition as the candidates for isolation and characterization of active substances. The determination of the acting point of selected extracts or fractions in the PDGF signaling pathway has been analyzing.

• 한국식품과학회지
• /
• 제27권5호
• /
• pp.799-806
• /
• 1995

고유점도가 3.75 dL/g인 감귤류 펙틴 용액의 전단점도 및 점탄성에 대한 농도의존성을 연구하였다. 전형적인 자수법칙 흐름 현상이 2.0% 이상의 펙틴 농도에서 관찰되었으며, 전단점도의 전단속도 의존성은 농도의 증가에 따라 더욱 뚜렷하게 나타났다. ${\eta}_{sp.o}$ 대 $C[\eta]$를 양대수 좌표에 그렸을 때 묽은 영역에서 진한 영역으로의 전이를 나타내는 $C^{*}[\eta]$는 약 4.0이었으며, 이때 ${\eta}_{sp.o}$의 값은 약 10.0을 나타내었다. 묽은 용액$(C[\eta]과 진한 용액$(C[\eta]>C^{*}[\eta])$에서 ${\eta}_{sp.o}$ $C[\eta]$의 기울기는 각각 1.1과 4.5였다. 전단점도를 ${\eta}/{\eta_0}$ 대 ${\gamma}/{\gamma}_{0.8}$에 대하여 그렸을 때 $2{\sim}5%$의 농도에서는 잘 중첩되었으나, 6%의 고농도에서는 중첩곡선에서 벗어나는 현상을 보였다. 펙틴 용액의 점탄성을 조사한 결과 전 농도범위에서 손실탄성률$(G^{\prime\prime})$의 값이 저장탄성률$(G^\prime)$보다 훨씬 높은 값을 보여 점성이 전체 점탄성을 지배하는 것으로 나타났다. 저 농도에서 전단점도는 복소점도와 거의 비슷한 값을 보여 Cox-Merz 법칙에 잘 부합하였으나, 농도가 높아질수록 두 값은 차이를 보였다.

• 대한수의학회지
• /
• 제39권3호
• /
• pp.628-634
• /
• 1999

We have studied, by a nonisotopic in situ end-labeling(ISEL) technique, frequency of apoptosis in the external granular layer(EGL) of the cerebellum of immature mice by ${\gamma}$-rays irradiation from $^{60}Co$ or diagnostic ultrasound exposure. The total number of normal cells and cells showing morphological features of apoptosis were counted. The frequency of apoptotic cells was expressed as a percentage of the total number of cells in EGL. The extent of changes following 200 cGy(1090 cGy/min) was studied at 2, 4, 6, 8, 12, or 24 hours after exposure. The maximal frequency was found 6~8 hours after exposure. The immature mice that received 18, 36, 54, 108, 198, 396 cGy of ${\gamma}$-rays or diagnostic ultrasound(7.5MHz, 4.2mW, $I_{SPTA}=7.9mW/cm^2$, $I_{SPTA}=114.3W/cm^2$) for 10 or 30 minutes were examined 6 hours after irradiation. Measurements performed after ${\gamma}$-ray irradiation showed a dose-related increase in apoptotic cells in each of the mice studied. The dose-response curves were analyzed by a linear-quadratic model ; frequency of apoptotic cell in the EGL was y = $(0.1349{\pm}0.01175)D$+$(-0.0001522{\pm}0.0000334)D^2$+0.048($r^2$ = 0.981, D = dose in cGy). In the experiment of ultrasound exposure, the frequency of apoptotic cell was $0.106{\pm}0.130$(10 minutes exposure) and $0.167{\pm}0.220$(30 minutes exposure). We estimated the relative dose of the yield from the experiment with ultrasound by substituting the yield from ultrasound exposure into the curve from the ${\gamma}$-irradiation. The relative dose of ultrasound exposure compared with ${\gamma}$-irradiation were 0.432 cGy(10 minutes exposure) and 0.885 cGy(30 minutes exposure). We have found that there is no evidence to indicate that diagnostic ultrasound involves a significant risk.

• Investigative Magnetic Resonance Imaging
• /
• 제19권2호
• /
• pp.76-87
• /
• 2015

Purpose: There is an ongoing search for a stent material that produces a reduced susceptibility artifact. This study evaluated the effect of manganese (Mn) content on the MRI susceptibility artifact of ferrous-manganese (Fe-Mn) alloys, and investigated the correlation between MRI findings and measurements of Fe-Mn microstructure on X-ray diffraction (XRD). Materials and Methods: Fe-Mn binary alloys were prepared with Mn contents varying from 10% to 35% by weight (i.e., 10%, 15%, 20%, 25%, 30%, and 35%; designated as Fe-10Mn, Fe-15Mn, Fe-20Mn, Fe-25Mn, Fe-30Mn, and Fe-35Mn, respectively), and their microstructure was evaluated using XRD. Three-dimensional spoiled gradient echo sequences of cylindrical specimens were obtained in parallel and perpendicular to the static magnetic field (B0). In addition, T1-weighted spin echo, T2-weighted fast spin echo, and $T2^*$weighted gradient echo images were obtained. The size of the low-intensity area on MRI was measured for each of the Fe-Mn binary alloys prepared. Results: Three phases of ${\alpha}^{\prime}$-martensite, ${\gamma}$-austenite, and ${\varepsilon}$-martensite were seen on XRD, and their composition changed from ${\alpha}^{\prime}$-martensite to ${\gamma}$-austenite and/or ${\varepsilon}$-martensite, with increasing Mn content. The Fe-10Mn and Fe-15Mn specimens comprised ${\alpha}^{\prime}$-martensite, the Fe-20Mn and Fe-25Mn specimens comprised ${\gamma}+{\varepsilon}$ phases, and the Fe-30Mn and Fe-35Mn specimens exhibited a single ${\gamma}$ phase. The size of the low-intensity areas of Fe-Mn on MRI decreased relative to its microstructure on XRD with increasing Mn content. Conclusion: Based on these findings, proper conditioning of the Mn content in Fe-Mn alloys will improve its visibility on MR angiography, and a Mn content of more than 25% is recommended to reduce the magnetic susceptibility artifacts on MRI. A reduced artifact of Fe-Mn alloys on MRI is closely related to the paramagnetic constitution of ${\gamma}$-austenite and/or ${\varepsilon}$-martensite.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1427-1439
• /
• 2008

The quality of track-bed fills of railways has been controlled by field measurements of density (${\gamma}_d$) and the results of plate-load tests. The control measures are compatible with the design procedures whose design parameter is $k_{30}$ for both ordinary-speed railways and high-speed railways. However, one of fatal flaws of the design procedures is that there are no simple laboratory measurement procedures for the design parameters ($k_{30}$ or, $E_{v2}$ and $E_{v2}/E_{v1}$) in design stage. A new quality control procedure, in parallel with the advent of the new design procedure, is being proposed. This procedure is based upon P-wave velocity involving consistently the evaluation of design parameters in design stage and the field measurements during construction. The key concept of the procedure is that the target value for field compaction control is the P-wave velocity determined at OMC using modified compaction test, and direct-arrival method is used for the field measurements during construction. The procedure was verified at a test site and the p-wave velocity turned out to be an excellent control measure. The specifications for the control also include field compaction water content of $OMC{\pm}2%$ as well as the p-wave velocity.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.167-171
• /
• 2016

Background: TlBr is of considerable technological importance for radiation detection applications where detecting high-energy photons such as X-rays and ${\gamma}$-rays are of prime importance. However, there were few reports on investigating optical properties of TlBr itself for deeper understandings of this material and for making better radiation detection devices. Thus, in this paper, we report on the optical characterizations of TlBr single crystals. Spectroscopic ellipsometry (SE) and photoluminescence (PL) measurements at RT were performed for this work. Materials and Methods: A 2-inch TlBr single crystalline ingot was grown by using the vertical Bridgman furnace. SE measurements were performed at RT within the photon energy range from 1.1 to 6.5 eV. PL measurements were performed at RT by using a home-made PL system equipped with a 266 nm-laser and a spectrometer. Results and Discussion: Dielectric responses from SE analysis were shown to be slightly different among the different samples possibly due to the different structural/optical properties. Also from the PL measurements, it was observed that the peak intensities of the middle samples were significantly higher than those of the other two samples. With the given values for permittivity of free space (${\varepsilon}_0=8.854{\times}10^{-12}F{\cdot}m^{-1}$), thickness (d = 1 mm), and area ($A=10{\times}10mm^2$) of the TlBr sample, capacitances of TlBr were 6.9 pF (at $h{\nu}=3eV$) and 4.4 pF (at $h{\nu}=6eV$), respectively. Conclusion: SE and PL measurement and analysis were performed to characterize TlBr samples from the optical perspective. It was observed that dielectric responses of different TlBr samples were slightly different due to the different material properties. PL measurements showed that the middle sample exhibited much stronger PL emission peaks due to the better material quality. From the SE analysis, optical, dielectric constants were extracted, and calculated capacitances were in the few pF range.

• 대한화학회지
• /
• 제55권5호
• /
• pp.812-818
• /
• 2011

[ $V_{0.9}Sb_{0.1}O_x$ ]systems, bulk and deposited on different supports (five types of ${\gamma}$-aluminas, ${\alpha}$-alumina, silica-alumina, silica gel, magnesium oxide), have been tested in the oxidative dehydrogenation (ODH) of iso-butane. This statement is derived from the data obtained by a set of characterisation techniques(specific surface area measurements, X-ray diffraction, X-ray photoelectron spectroscopy, laser Raman spectroscopy, in situ differential scanning calorimetry and in situ diffuse reflectance-absorption infrared Fourier transform spectroscopy).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.21-23
• /
• 2002

In this paper, the electrochemical behavior of Viologen self assembly monolayer has been investigated with QCM, which has been known as nano-gram order mass detector. The self assemvly process of Viologen was monitored using resonant frequency $({\Delta}F)$ and resonant resistance(R). QCM measurements indicated a mass adsorption for Viologen assembling on the gold sufrace with a frequency change about 135[Hz] and calculated its surface coverage($\Gamma$) to be $3.5273{\times}10^{-9}[mol/cm^{2}]$. Also reversible redox process was observed and analyzed with ionic interaction at the Viologen/solution interface using ${\Delta}F$.