• The Korean Journal of Pharmacology
• /
• v.24 no.1
• /
• pp.43-52
• /
• 1988

To elucidate the mechanism of action of local anesthetics, the effects of local anethetics on the microenvironment of the lipid bilayers of synaptosomal plasma membrane vesicles (SPMV) isolated from bovine brain and dimyristoylphosphatidylcholine (DMPC) multilamellar liposomes were investigated employing the intermolecular excimer fluorescence technique and differential scanning calorimetry (DSC). The relative intensities of excimer and monomer fluorescence of pyrene are a simple linear function of the viscosity of a homologous series of solvents. The microviscosity(${\eta}$)of the hydrocarbon region of SPMV was measured by this method and the value was $57.3{\pm}5.3\;cP$ at $37^{\circ}C$. In the presence of lidocaine-HCl and procaine-HCl, the values decreased to $46.5{\pm}5.1\;cP$ and $54.7{\pm}4.8\;cP$, respectvely. The differential scanning thermograms of DMPC multilamellar liposomes showed that local anesthetics significantly lowered the phase transition temperature, broadened the thermogram peaks, and reduced the size of the cooperative unit. These results indicate that local anesthetics have significant fluidizing effects on biomembranes and perturbation of membrane lipids may produce some, but not all, of their pharmacological actions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.451-456
• /
• 1995

To elucidate the intrinsic rheological properties of carboxymethyl chitin (CM-chitin) from the shell of red snow cyab (Chinonecetes japonicus), the configuration and polyelectrolyte behavior of CM-chitin in low concentration solution were investigated. Unperturbed dimensions were ranged from $127{\AA}\;to\;113{\AA}$ as root mean square end-to-end distance$(r_0)$, $52{\AA}$ to $46{\AA}$ as radius of gyration$(S_0)$. The intramolecular expansion tarter(a) was not varied with molecular weight and was 2.1. And effective bond length $(b_0)$ was $14.5{\AA}$. In perturbed condition, Flory constant was $2.35\times10^{21}$. When ionic strength were 0.02 and 1.0, intrinsic viscosity were 1.95dl/g and 1,06 dl/g, respectively. These results suggested that CM-chitin is a polyelectrolyte in aqueous media. At infinite ionic strength, intrinsic viscosity was 0.91dl/g. The intrinsic stiffness of CM-chitin backbone was estimated by evaluating the stiffness parameter (B) as 0.11 and agreed well with the results of k-carrageenan.

• The Korean Journal of Physiology and Pharmacology
• /
• v.4 no.3
• /
• pp.243-251
• /
• 2000

In order to provide a basis for studying the molecular mechanism of pharmacological action of local anesthetics and to develop a fluorescence spectroscopic method which can detect the microviscosity of native and model membranes using intramolecular excimerization of 1,3-di(l-pyrenyl)propane (Py-3-Py), we examined the effect of lidocaine HCl on the microviscosity of model membranes of phosphatidylcholine fraction extracted from synaptosomal plasma membrane vesicles (SPMVPC). The excimer to monomer fluorescence intensity ratio (I'/I) of Py-3-Py in liquid paraffin was a simple linear function of $T/{\eta}.$ Based on this calibration curve, the microviscosity values of the direct probe environment in SPMVPC model membranes ranged from $234.97{\pm}48.85$ cP at $4^{\circ}C$ to %19.21{\pm}1.11$ cP at $45^{\circ}C.$ At $37^{\circ}C,$ a value of $27.25{\pm}0.44$ cP was obtained. The lidocaine HCl decreased the microviscosity of SPMVPC model membranes in a concentration-dependent manner, with a significant decrease in microviscosity value by injecting the local anesthetic even at the concentration of 0.5 mM. These results indicate that the direct environment of Py-3-Py in the SPMVPC model membranes is significantly fluidized by the lidocaine HCl. Also, the present study explicitly shows that an interaction between local anesthetics and membrane lipids is of importance in the molecular mechanism of pharmacological action of lidocaine HCl.

• Journal of Technology Innovation
• /
• v.22 no.4
• /
• pp.21-55
• /
• 2014

The rates of technological innovation and environmental change as well as market competition have recently accelerated, which makes it difficult for firms to satisfy the needs of their customers through existing product innovation or limited services. Some firms have attempted to find the solutions to this problem by conducting business model (BM) innovation. This study reviews the theoretical discussion to BM innovation and suggests propositions concerning the necessity of BM innovation and conditions of successful BM innovation. Furthermore, the study examines the applicability of the propositions and draws strategic implications by analysing the cases of two world-wide leading firms, AVL and ETAS, in the automobile R&D service sector. In particular, the study investigates how the firms with technological competence in the R&D service sector obtain market performance through BM innovation. Results of this study show that the case firms recognize the necessity of BM innovation based on product (or technology)-service fusion to effectively propose customer value and create corporate profit. Also, the firms exploit firm-specific complementary assets for successful BM innovation. This paper contributes to the literature of innovation management by promoting academic discussion concerning BM innovation in Korea and suggesting strategic implications for further development of R&D service sector and related firms in Korea.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.3
• /
• pp.63-74
• /
• 1999

A sliding mode fuzzy control (SMFC) algorithm is presented for vibration of large structures. Rule-base of the fuzzy inference engine is constructed based on the sliding mode control, which is one of the nonlinear control algorithms. Fuzziness of the controller makes the control system robust against the uncertainties in the system parameters and the input excitation. Non-linearity of the control rule makes the controller more effective than linear controllers. Design procedure based on the present fuzzy control is more convenient than those of the conventional algorithms based on complex mathematical analysis, such as linear quadratic regulator and sliding mode control(SMC). Robustness of presented controller is illustrated by examining the loop transfer function. For verification of the present algorithm, a numerical study is carried out on the benchmark problem initiated by the ASCE Committee on Structural Control. To achieve a high level of realism, various aspects are considered such as actuator-structure interaction, modeling error, sensor noise, actuator time delay, precision of the A/D and D/A converters, magnitude of control force, and order of control model. Performance of the SMFC is examined in comparison with those of other control algorithms such as $H_{mixed 2/{\infty}}$ optimal polynomial control, neural networks control, and SMC, which were reported by other researchers. The results indicate that the present SMFC is an efficient and attractive control method, since the vibration responses of the structure can be reduced very effectively and the design procedure is simple and convenient.

• Korean Journal of Crystallography
• /
• v.16 no.1
• /
• pp.43-53
• /
• 2005

The dihydrido P-C-P pincer complex, $IrH_2{C_6H_3-2,6-(CH_2PBu_2^t)_2}$ (1), was successfully prepared from the reaction of the hydrochloride complex, $IrClH (C_6H_3-2,6-(CH_2PBu_2^t)_2}$, and super acid $(LiBEt_3H)$ under 1 atm of hydrogen in pentane solution at room temperature and followed by Heating at $130^{\circ}C$ in vacuo. Jensen recently found that the dihydrido P-C-P pincer complex 1 is a highly active homogeneous catalyst for the transfer dehydrogenation of alkanes with unusual longterm stability at temperatures as high as $200^{\circ}C$. The treatment of dihydrido complex 1 with nitrogen, water, carbon dioxide, and carbon monoxide in presence of tert-butylethylene (the) at room temperature in an appropriate solution gave the dinitrogen complex, $[Ir{C-6H_3-2,6-(CH_2PBu_2^t)_2}]_2({\mu}-N_2)$ (2), the hydrido hydroxyl complex, $IrH(OH){C_6H_3-2,6-(CH_2PBu_2^t)_2}$ (3), the carbon dioxide complex, $Ir({\eta}^2-CO_2) {C_6H_3-2,6-(CH_2PBu_2^t)_2}$ (including the bicarbonate complex, $IrH({\kappa}^2-O_2COH){C_6H_3-2,6-(CH_2PBu_2^t)_2}\;(4))$, and the carbonyl complex, $Ir(CO) {C_6H_3-2,6-(CH_2PBu_2^t)_2}\;(5)$ (including the carboxyl complex, $IrH(C(O)OH) {C_6H_3-2,6-(CH_2PBu_2^t)_2}\;(6))$, in good yield, respectively. These P-C-P iridium complexes were isolated and characterized by $^1H,\;^{13}C,\;^{31}P\; NMR$, and IR spectroscopy. In addition, the complexes (1-6) were characterized by a single crystal X-ray crystallography. These complexes account for these small molecules' inhibition of dehydrogenation of alkanes catalyzed by the dihydrido complex 1.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.30-37
• /
• 1989

The PIN type a-SiC:H/a-Si:H heterojunction solar cells were fabricated by using the rf glow discharge decomposition of $SiH_4$ mixed with $CH_4,B_2,H_6\;and\;PH_3.$ The efficiency of the solar cell of the $SnO_2/ITO$ was higher than that of ITO transparent oxide layer by 1.5%. The P layer was prepared with the thickness of $100{\AA}$ and $CH_4/SiH_4$ ration of 5. The I layer has been deposited on the P layer and it is not pure intrinsic but near N type. So $SiH_4$ mixed with $B_2H_6$ of 0.3ppm was used to change this N type nature to intrinsic having the thickness of 5000${\AA}$. And consecutively, the N layer was deposited with t ethickness of $400{\AA}$ using $SiH_4/PH_3$ mixtures. The solar cell demonstrated 0.94V of $V_{oc'}$ 14.6mA/cm of $J_{sc}$ and 58.2% of FF, resulting the efficiency of 8.0%. To minimize loss by the reflection of light, $MgF_2$ layer was coated on the lgass and the efficiency was improved by 0.5%. Therefore, the solar cell indicated overall efficiency of 8.5%.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.84-92
• /
• 2001

In today's world, rise in the establishment of social infrastructure resulting from population saturation in large cities has led to more extensive and frequent use of chemical materials on facilities. A result, unexpected and serious accidents, hazards, contingencies and disasters are more prevalent than ever. Such phenomenon calls for more devoted and concerted efforts towards finding ways to reduce the safety hazards that are seen to take place more often than before with the increase in the number of facilities that are prone to bring disaster and hazard coupled with the conventional safety problems that continue to exist even today. In developed countries, such challenge is addressed by various appropriate countermeasures drawn up by local professional committees on industrial facilities, whose members conduct offsite and onsite evaluation un the potential industrial disasters and its seriousness and provide their advice thereof. Against this backdrop, this study aims at identifying a comprehensive safety allowance level (safety acceptable level) when imposing limitation on the development of conventional or new facilities, for the fur pose of establishing a safety allowance level of disastrous and dangerous facilities in Korea. This is done by assessing and applying the level of danger each individual is exposed to in a randomly selected region (disastrous and dangerous areas in Seoul) based on probability of quantitative hazards, as well as simulation and calculation methods which include: i) social disaster evaluation method applying Quantified Risk Assessment of Health & Safety Executive of UK and Matrix of Risk of Evaluated Sources of Hazard; ii) Fault Tree or Event Tree Analysis and etc.

• Health Policy and Management
• /
• v.14 no.3
• /
• pp.66-96
• /
• 2004

This study was intended to describe the hypertensive patient's lifestyle and quality of life by creating a hypothetic model on the lifestyle and quality of life and by examining a causeand effect relationship, and to contribute to countermeasures for practicing their lifestyle and improving the quality of life through creating a predictable model. Exogenous variable($\xi$) of hypothetic model in this study composed of a family support, hypertension knowledge, perceived benefit and toughness. Endogenous variable($\eta$) composed of self-esteem, perceived health state, depression, lifestyle and quality of life. There were 6 measured variables for exogenous variable(x). There were 9 measured variables(y) for endogenous variable. Also, there was error variable ($\delta,\;\epsilon$) of an individual. The survey was conducted for 207 hypertensive parents who received an out-patient service for 3 weeks from September 15, 2003 to October 3, 2003 after diagnosing as hypertension from 2 general hospitals in Daegu. As the conformance of hypothetic model in this study, there were $x^2$= 155.81, standard $x^2$ ($x^2$/df)=2.32, GFI=0.003, NFI=0.971, CFI=0.982, and RMSEA=0.080. Generally, the hypothetic model and actual data were well coincided. The higher the hypertension knowledge was(t=6.030), the higher the perceived benefit was(t=9.429), the higher the toughness was(t=2.783), and the higher the perceived health state was(t=2.282), the higher the lifestyle was. However, the degree of depression (t=-0.038), family support(t=1.161), and self-esteem(t=0.518) was not affected. The higher the family support was(t=10.476), the higher the self-esteem was(t=7.244), the higher the perceived health state was(t=6.996), the lower the degree of depression was(t=-2.044), and the higher the practice degree of lifestyle was(t=3.315), the higher the quality of life was. However, the toughness(t=1.672) didn't have a significant influence on the quality of life. It was modified to increase the model conformance and gain a conscious model As the result of model revision, for the model conformance, there were $x^2$= 118.43, standard $x^2$=1.69, GFI=0.923, NFI=0.976, CFI=0.982, and RMSEA=0.078. As the revised model showed the better conformance than hypothetic model, it seemed to be more suitable model. In the revised model, the perceived benefit(t=9.440) affected the lifestyle in the revised model. Then, the lifestyle was influenced by hypertension knowledge(t=6.139), toughness (t=2.757), family support(t=2.078), perceived health state(t=1.962) in the order. As a factor which affected the quality of life, there were the family support(t=l0.46l), self-esteem(t=7.368), perceived health state(t=6.989), lifestyle(t=3.316), toughness(t=2.584), and depression(t=-1.968) in the order. It showed the significant effect.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.311-316
• /
• 2008

Calcium phosphate cement (CPC) has been used as bone substitute successfully due to good biocompatibility and osteoconductivity. One of the important mechanical characteristics of CPC is flowablility, which can be evaluated by measuring rheological parameters. However, there have been few studies that measured rheological properties of CPC. The purpose of this study was to evaluate the rheological properties of CPC paste mixed with 2 kinds of setting solutions, 2% hydroxyprophyl methylcellulose (HPMC) and 35% polyacrylic acid (PAA). The CPC used was dicalcium phosphate dihydrate (DCPD). Rheological properties of CPC paste were measured using rheometer. The statistical analysis was carried out with Mann-whitney test with Bonferronis collection. CPC with both setting solutions showed shear thinning behavior. CPC with 2% HPMC showed signigicantly higher complex viscosity than CPC with 35% PAA(p<0.05).