• Natural Product Sciences
• /
• 제18권2호
• /
• pp.97-101
• /
• 2012

Six lignan compounds, 1-(17,21-dihydroxyphenyl)-9-(12,13-dihydroxyphenyl)-1-nonanone (malabaricone C) (1), 7'-(3',4'-methylenedioxyphenyl)-8,8'-dimethyl-7-(3,4-dihydroxyphenyl)-butane (2), 7'-(3',4'-dimethoxyphenyl)-8,8'-dimethyl-7-(3-methoxy-4-hydroxyphenyl)-butane (3), 7-(4-hydroxy-3-methoxyphenyl)-7'-(3',4'-methylenedioxyphenyl)-8,8'-lignan-7-methyl ether (4), (+)-erythro-(7S,8R)-${\Delta}^{8^'}$-7-hydroxy-3,4,3',5'-tetramethoxy-8-O-4'-neolignan (5), and (+)-erythro-(7S,8R)-${\Delta}^{8^'}$-7-acetoxy-3,4,3',5'-tetramethoxy-8-O-4'-neolignan (6), were isolated from the seeds of Myristica fragrans. The chemical structures of these compounds were determined on the basis of spectroscopic analyses including 2D NMR. Compounds 1 - 6 were evaluated for their cytotoxic activity against the HL-60, MCF-7, and A549 cancer cell lines in in vitro.

• 마이크로전자및패키징학회지
• /
• 제18권3호
• /
• pp.39-43
• /
• 2011

마이크로파 유전체의 Q 값 측정에 널리 사용되고 있는 유전체 공진기 방법에서 캐비티의 재질변화가 유전체의 Q 값 측정에 미치는 오차요인에 대해 HFSS 시뮬레이션과 실측평가를 병행하여 조사하였다. HFSS의 전자계 벡터 형상으로부터 $TE_{01\delta}$ 모드의 공진주파수를 결정하고 $S_{21}$ 파라메터의 3dB 대역폭으로부터 Q 값을 계산하였다. 캐비티 금속이 Cu, SUS, Au 등으로 변화할 경우 유전체 공진기의 Q 값 측정에 큰 오차는 발생하지 않았으나, 금속이 산화하여 전도도가 수 천 정도로 떨어질 경우 Q 값이 매우 낮게 측정되는 오차가 발생함을 확인하였다. 이러한 시뮬레이션 결과는 실제로 다양한 재질의 금속 캐비티를 가지고 유전체 공진기의 Q 값을 측정해 본 결과 서로 일치되는 관련성을 나타내었다.

• 동력기계공학회지
• /
• 제7권4호
• /
• pp.55-60
• /
• 2003

This paper is to investigate the fatigue crack growth of plasma-sprayed coating steels according to heat treatments. The experimental materials are carbon steels(substrate: S45C) with plasma-sprayed coating layers of Ni-4.5%Al and $TiO_2$. The fatigue test is conducted on compact tension specimen by a servo-hydraulic fatigue testing machine. The specimens are heat-treated at $400^{\circ}C\;and\;800^{\circ}C$, respectively. Loading condition is a constant amplitude sinusoidal wave with a frequency of 10Hz and a load ratio of 0.1. The fatigue crack growth length is automatically measured by a compliance method. In the case of non-heat treated specimens, the fatigue crack growth rates of both substrate and coating specimen are almost same. The crack growth rates of substrates and coating steels by heat treatment are larger than those of the non-heat treated one, because the ductile property increase by heat treatment. In ${\Delta}K<18MPa{\cdot}m^{1/2}$, the crack growth rates of the heat-treated specimens are slightly taster than non-heat treated one. But the both heated and non-heated one are almost same in ${\Delta}K>18MPa{\cdot}m^{1/2}$.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.29-38
• /
• 2005

It is important to understand groundwater conditions such as recharge, flow and hydrochemical process occurred within an aquifer for groundwater protection and groundwater resource management. Groundwater from the Triassic Sherwood Sandstone aquifer of North Yorkshire has been used for industrial purposes and domestic water supply. Tn order to understand the processes affecting groundwater chemistry and identify the sources of high chloride, sulphate and nitrate concentrations hydrochemical and isotopic measurements were carried out. Hydrochemical and isotopic measurements indicated that five groundwater types exist within the Sherwood Sandstone aquifer of study area. The results of hydrochemical and isotopic measurements showed that older groundwaters have different hydrochemical and isotopic characteristics from recent recharge water. It was also found that water-rock interactions are the dominant mechanism controlling the ${\delta}^{13}C$ composition of dissolved inorganic carbon, the ${\delta}^{34}S\;and\;{\delta}^{18}O$ composition of dissolved sulphate and the strontium isotope ratios ($^{87}Sr/^{86}Sr$) in recent recharge water and old groundwater. Several abstraction boreholes within the Selby wellfield have been contaminated by saline water. The isotopic data of saline groundwater samples taken from these abstraction boreholes indicate that saline waters are derived from the dissolution of the Triassic evaporites within the Mercia Mudstone.

• Membrane and Water Treatment
• /
• 제4권4호
• /
• pp.265-275
• /
• 2013

China is one of the countries with the highest reserves of coal bed methane (CBM) in the world. Likewise, the CBM industry is significantly growing in China. However, activities related to CBM development have led to more environmental problems, which include serious environmental damage and pollution caused by CBM-produced water. In this paper, the detailed characteristics of CBM-produced water in the southern Qinshui Basin were investigated and analyzed and compared with local surface water and coal mine drainage. Most of CBM-produced water samples are contaminated by higher concentration of total dissolved solids (TDS), K (Potassium), Na (Sodium) and $NH_4$. The alkalinity of the water from coalmines and CBM production was higher than that of the local surface water. The concentrations of some trace elements such as P (Phosphorus), Ti (Titanium), V (Vanadium), Cr (Chromium), Ni (Nickel), Zn (Zinc), Ge (Germanium), As (Arsenic), Rb (Rubidium), and Pd (Palladium) in water from the coalmines and CBM production are higher than the acceptable standard limits. The ${\delta}D$ and ${\delta}^{18}O$ values of the CBM-produced water are lower than those of the surface water. Similarly, the ${\delta}D$ values of the CBM-produced water decreased with increasing drainage time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.214-214
• /
• 2010

The 0.65Pb($Mg_{1/3}Nb_{2/3})O_3-0.35PbTiO_3$ (PMN-PT) thin films with $La_{0.5}Sr_{0.5}CoO_{3-\delta}$ (LSCO) bottom electrodes were grown on $CeO_2$/YSZ/Si(001), Pt/$TiO_2$/Si and $SrTiO_3$ (STO) substrates using conventional pulsed laser deposition (PLD) at a substrate temperature of $550^{\circ}C$. Since generally the crystallographic orientation of the bottom electrode induces the orientation of the films deposited on it, it allows us to observe the influence of the PMN-PT film orientation on the electrical properties. Phi scan done on PMN-PT/LSCO thin films shows epitaxial behavior of the films grown on sto substrates and $CeO_2$/YSZ buffered Si(001) substrates, and (110) texture on Pt/$TiO_2$/Si substrates. Polarization-electricfield (P-E) measurement shows good hysteresis behavior of PMN-PT films with remnant polarization of 18.2, 8.8, and $4.4{\mu}C/cm^2$ on $CeO_2$/YSZ/Si, Pt/TiO2/Si and STO substrates respectively.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.48-59
• /
• 2000

Electrochromic NiO films were prepared by using an electron-beam deposition method. The influence of the preparation conditions, especially the substrate temperature, on the electrochemical stability of film was investigated. The optical properties and stability of as-deposited films strongly depended on the substrate temperature during deposition. The NiO film prepared at a substrate temperature of 150~$200^{\circ}C$ was found to be the stabel when subjected to 5000cycles in a 0.5M solution of KOH between -6.0 and +0.8V. The best electrochromic parameters after 5000cycles were obtained for samples with substrate temperature of $150^{\circ}C$. The obtained electrochromic parameters are CE=-0.049($\lambda$=550nm), $\Delta$OD=0.88($\lambda$=550nm)$\textrm{cm}^2$/mC, Qin=-18.11mC/$\textrm{cm}^2$ and Qleft= 14.8mC/$\textrm{cm}^2$.

• 자원환경지질
• /
• 제32권4호
• /
• pp.385-398
• /
• 1999

The Narim gold mine is located approimately 200km southeast of Seoul within the Muju mineralized district of the Sobaegsan gneiss complex, Korea. Environmental geochemistry were undertaken for various kinds of water (surface, ground and mine water) collected of April, September and November in 1998 from the narim mine creek. Hydrogeochemical compositions of water samples are characterized by the relatively significant enrichment of Na+K, alkali ions, $HCO_{3}$, $NO_{3}$, Cl and F in groundwater, wheras the mine and surface waters are relatively enriched in Ca+Mg, hea표 metals and $SO_{4}$. Therefore, the groundwaters belong to the (Na+Ca)-( $HCO_{3}+SO_{4}$) type, respectively. The pH and EC values of the non-mining creek surfers are relatively lower compared with those of the surface water of the mine and ore dump area. The d values ($\delta$D-8$\delta^{18}$O) of all kinds of water from the Narim mine creek are 5.8 to 13.1 The range of $\delta$D and $\delta^{18}$O values (relative to SMOW) are shown in distinct two groups as follows: for the April waters of -64.8 to -67.8$\textperthousand$ and -9.6 to -10.0$\textperthousand$(d value=10.1 to 13.1), and for the November waters of -65.9 to -70.2$\textperthousand$ and -9.3 to -9.6$\textperthousand$ (d value=5.8 to 7.9), respectively. This range variation indicates that two group water were composed of distinct waters with seasonal difference. Geochemical modeling showed that mostly toxic metals (As, Fe, Mn, Ni, Pb, Zn) may exist largery in the from of metal $(M2^+)$ and metal-sulfate $(MSO_4\;^{2-$\mid$),\; and \;SO_4^{2-$\mid$}$ concentration influenced the speciation of heavy metals in the meteoric water. These metals in the groundwater could be formed of $CO_3 \;and \;(OH)_3$ complex ions. Using computer program, saturation index of albite, calcite, dolomite in meteoric water show undersaturated and progreddively evolved toward the saturation state, however, ground and mine water are nearly saturated. The gibbsited water-mineral reaction and stabilities suggest that the weathering of silicate minerals may be stable kaolinite, illite and Nasmectite. The clay minerals will be transformed to more stable kaolinite owing to the contiunous reaction.

• 한국광물학회지
• /
• 제15권3호
• /
• pp.205-220
• /
• 2002

가사도 지역 금은광상은 후기 백악기 화산활동에 의해 형성된 화산쇄설암을 모암으로 하여 판상(sheeted) 및 망상(stockwork) 석영맥으로 산출되며, 빗살, 호상 및 깃털조직 등을 보이고 있다 금은광화작용과 관련된 열수변질대는 광물 조합에 따라 고점토대(딕카이트-명반석-석영), 점토대(딕카이트-석영), 견운모대(석영-견운모-황철석) 및 프로필리틱대(녹니석-탄산염광물-석 영-장석-휘석)로 구분된다 고점토대는 등대맥 최상부인 노인봉을 중심으로 분포하고 있으며, 그 외각부에서 견운모대 및 프로필리틱대가 산출되고 있다. 석영맥은 석영, 옥수질석영, 아듈라리아, 탄산염광물등의 맥석광물과 함께 미립의 황철석, 섬아연석, 황동석, 방연석, 함은광물, 에렉트럼 등 광석광물로 구성되며, 에렉트럼의 금함량은 14.6~53.7 atomic % Au이다. 유체포유물 및 에렉트럼-섬아연석 지질온도계로부터 추정된 광화작용 온도는 $158^{\circ}C$~285$^{\circ}C$범위로 전형적인 천열수광응의 온도범위를 보이고 있으며, 산소.수소 안정동위원소 연구 결과($\delta^{18}$ /$O_{water}$ =-10.1~8.0$\textperthousand$, $\delta$D=-68~64$\textperthousand$) 동위원소 교환이 적게 진행된 천수로부터 유래된 광화유체로 추정된다. 이러한 변질대의 분포특성, 열수유체의 기원 및 생성환경을 종합해 볼 때, 현재 지표에 노출된 가사도 지역의 광화대는 온천형 저유황성 천열수 금은광상의 최상부에 해당하는 것으로 추정된다.

• Nuclear Engineering and Technology
• /
• 제26권3호
• /
• pp.337-344
• /
• 1994

가압경수형 원자로의 노심장전모형 선정시 제약이 되는 집합체첨두 $F_{{\Delta}H}$$^{N}$ 을 감소시키기 위하여 다중농축도 개념을 적용하여 핵연료봉의 집합체내 출력분포를 평탄화함으로써 첨두봉출력을 감소시키는 방안에 대하여 연구하였다. 다중농축도 핵연료집합체란 기존 집합체의 단일 농축도핵연료봉을 이중농축도 핵연료봉으로 대체한 집합체를 말한다. 농축도의 차이를 변화시켜가며 적절한 배치에 의하여 핵연료봉의 집합체내 배치모형을 최적화 하였고, 이러한 다중농축도 핵연료 집합체에서 첨두봉출력의 감소를 가장 크게하는 농축도의 차이는 약 0.3~0.4w/o 일때가 가장 적절한 것으로 밝혀졌다. 다중농축도 핵연료 집합체의 노심에서의 효과를 알아보기 위하여 고리 4호기를 대상으로 8주기에서 평형주기까지 계산을 수행하였으며 그 결과 약 1.5%의 $F_{{\Delta}H}$$^{N}$ 감소효과를 얻을 수 있었다.