• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.38-44
• /
• 2004

The iron doped colossal magnetoresistance materials with La-Ba-Mn-O perovskites structure have been synthesized by chemical reaction of sol-gel methods. Their crystallographic and magnetic properties have been studied with x-ray diffraction, VSM, RBS, Mossbauer spectroscopy, and magnetoresistance measurements. The crystal structure of the La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$ at room temperature was determined to be orthorhombic of Pnma. The lattice parameters a$\_$0/ and c$\_$0/ increased gradually, but b$\_$0/ deceased with increase of iron substitution. The magnetization and coercivity deceased, also the Curie temperature decreased from 360 K as x increased from 0.00 to 0.05. Magnetoresistence measurements were carried out, and the maximum MR ($\Delta$$\rho$/$\rho$(0)) was observed at 281 K, about 9.5 % in 10 kOe. The temperature of maximum resistance (R$\_$MAX/) decreased with increasing substitution of Fe ions and a semiconductor-metal transition temperature (T$\_$SC-M/) decreased too. This phenomena show that ferromagnetic transition temperature decreased by substituting Fe for Mn ions, it decreases double exchange interaction. This result accords with magnetic structure of neutron diffraction. Mossbauer spectra of La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$were taken at various temperatures ranging from 15 to 350 K. With lowering temperature of the sample, two magnetic phases were increased and finally it showed the two sharp sextets of spectra at 15 K. The isomer shift at all temperature range is about 0.3 mm/s relative to Fe metal, which means that both Fe ions are Fe$\^$3+/ states.Fe$\^$3+/ states.

• Journal of dental hygiene science
• /
• v.13 no.1
• /
• pp.13-19
• /
• 2013

This study evaluated the change of color and the microhardness according to time-out using the office bleaching with in vitro test after bleaching one time 1 day per week, total three times, for the control group and three times per 1day for the experimental group. $L^*$ was increased in both groups. Group 1 showed a significant increase statistically between before and after tooth whitening (p<0.05). Group 2 showed a significant increase statistically between before and after tooth whitening (p<0.05). ${\Delta}E^*$ was huge in both groups. In group 1, it was great in terms of statistical significance between 1 day and 7 days after tooth whitening (p<0.05). In group 2, it was the greatest between before and 1 day after tooth whitening and was significant statistically as well (p<0.05). Vickers hardness number (VHN) decreased in both groups. In group 1, VHN decreased over time and the difference was significant statistically (p<0.05). In group 2, VHN decreased over time and the difference was significant statistically (p<0.05). Percentage microhardness loss was great in both groups. In group 1, it was the greatest between 1 day and 7 days after the treatment, and it was significant statistically (p<0.05). In group 2, it was the greatest between before and 1 day after the treatment, and it was significant statistically (p<0.05). Put together, the more frequent tooth whitening a day is, the longer the period of tooth whitening when applying the same frequency, the greater color change was, however the microhardness decreased, in regard to the results over time using 15% hydrogen peroxide tooth whitening product for professionals.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.430-436
• /
• 2007

The dinuclear half-sandwich CGCs (constrained geometry catalyst) with a polymethylene bridge, $[Ti({\eta}^5 : {\eta}^1-indenyl)SiMe_2NCMe_3]_2(CH_2)_n]$[n = 6 (1) and 12 (2)], have been employed in the copolymerization of ethylene and norbornene (NBE). To compare the mononuclear metallocene catalysts; $Ti({\eta}^5 : {\eta}^1-2-hexylindenyl)SiMe_2NCMe_3$ (3), $(Cp^* SiMe_2NCMe_3)$Ti (Dow CGC) (4) and ansa-$Et(Ind)_2ZrCI_2$ (5), were also studied for the copolymerization of ethylene and NBE. It was found that the activity increased in the order: 1 < 2 < 3 < 5 < 4, indicating that the presence of the bridge between two the CGC units contributed to depressing the polymerization activity of the CGCs. This result strongly suggests that the implication of steric disturbance due to the presence of the bridge may playa significant role in slowing the activity. Dinuclear CGCs have been found to be very efficient for the incorporation of NBE onto the polyethylene backbone. The NBE contents in the copolymers formed ranged from 10 to 42%, depending on the polymerization conditions. Strong chemical shifts were observed at ${\delta}$42.0 and 47.8 of the isotactic alternating NBE sequences, NENEN, in the copolymers with high NBE contents. In addition, a resonance at 47.1 ppm for the sequences of the isolated NBE, EENEE, was observed in the $^{13}C-NMR$ spectra of the copolymers with low NBE contents. The absence of signals for isotactic dyad at 48.1 and 49.1 ppm illustrated there were no isotactic or microblock (NBE-NBE) sequences in the copolymers. This result indicated that the dinuclear CGCs were effective for making randomly distributed ethylene-NBE copolymers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1452-1456
• /
• 2008

For the effective use of salmon processing by-products, the food components of salmon frame muscle were investigated and compared with those of fillet muscle. The proximate composition of salmon frame muscle was 73.2 g/100 g muscle for the moisture, 76.9 g/100 g dry material for the protein, 15.7 g/100 g dry material for the lipid and 4.1 g/100 g dry material for the ash. pH and volatile basic nitrogen (VBN) content of salmon frame muscle were 6.63 and 16 mg/100 g, respectively. The proximate composition, pH and VBN of salmon frame muscles were similar to those of salmon fillet muscle. The Hunter values of salmon frame muscle were 55.34 for L value, 16.60 for a value, 19.99 for b value and 48.83 for ${\Delta}E$ value, which were different compared to the salmon fillet muscle. The trichloroacetic acid (TCA) soluble-N content of salmon frame muscle was 542 mg/100 g, which was lower than that of salmon fillet muscle. No difference was found in fatty acid composition, total amino acid, calcium, phosphorus contents and sensory evaluation between salmon frame muscle and salmon fillet muscle. These results suggested that muscle from salmon frame could be used as resources for seafood processing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.6
• /
• pp.743-749
• /
• 2016

We compared two different processing methods for preparing high quality frozen in-shell baby clam products. In the first method, sand and mud were removed from the clams, then they were vacuum packed in polyethylene film, boiled at $97^{\circ}C$ for 6 min, and snap frozen in a cold air blast freezer (sample 1). The second processing method was similar, except the boiling process was excluded (sample 2). Both frozen products were boiled for 4 min, and then shucked and minced. Various quality metrics, such as the opening rates of shells, chemical composition, pH, volatile basic nitrogen (VBN), salinity, thiobarbituric acid (TBA), amino-N, total amino acids and free amino acids were measured, and sensory evaluation was conducted. The opening rates of shells of sample 1 and sample 2 were 98.3% and 4.67%, respectively. The proximate composition of sample 1 and sample 2 was 75.2% and 78.7% moisture, 19.7% and 16.2% crude protein, 2.45 and 2.2% crude lipid, 2.8% and 2.1% ash, and 2.1% and 1.9% salinity, respectively. The L, a, b and ${\Delta}E$ values were similar: 48.6 and 49.2, 3.9 and 3.9, 15.7 and 15.5, and 50.7 and 50.1 for sample 1 and sample 2, respectively. The sensory evaluation score of sample 1 was higher than that of sample 2. Sample 1 was deemed to be superior to sample 2; therefore, we determined that the boiling process is needed for manufacturing high-quality frozen clam products.

• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.1
• /
• pp.41-49
• /
• 2017

This study investigated the effects of teff flour on the properties of pound cakes. Five types of pound cakes were made by addition of 0% (Control), 5% (TF5), 10% (TF10), 15% (TF15), and 20% (TF20) of teff flour based on wheat flour. Specific gravity of pound cake batter showed no significant differences among samples as 0.54 (p<0.05). Baking loss was the highest in the control at 5.92% and the lowest in TF20 at 5.27%. Batter yield was the highest in TF20 at 94.73% and the lowest in control at 94.08%. Moisture content was the highest in TF20 at 23.68% and the lowest in control at 21.32%. pH showed no significant differences among samples at 7.61~7.65 (p<0.05). a-values of crumb significantly increased while L-values and b-values significantly decreased with added teff flour amounts. (p<0.05). ${\Delta}E$ values significantly increased with teff flour at 34.32~49.24 (p<0.05). Hardness was lowest in TF20 at $180.60g/cm^2$. Springiness was the lowest in TF20 at 85.37%. Cohesiveness showed no significant differences among samples (p<0.05). Chewiness was the lowest in TF20 at 172.17 g. Hardness more rapidly increased in control at $273.13{\sim}26,123.33g/cm^2$ than that of pound cakes with teff flour. Avrami exponent (n) was the highest in the control at 3.5987 and the lowest in TF20 at 1.2144. In sensory evaluation, flavor of TF20 was higher than that of the control at 4.43. Overall acceptability had a higher score in TF20 than in the control. It is considered that addition of 20% teff flour can improve the quality characteristics and retard retrogradation of pound cake.

• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.384-388
• /
• 1996

This research was conducted to investigate the effective methods for browning inhibition on yam (Dioscorea aimadeimo) during dehydration by physical and chemical pretreatments. Moisture, crude protein, crude fiber and N-free extract contents of yam were 81.17%, 1.43%, 0.29% and 15.81%, respectively. Yams were sliced to 0.5 cm thickness and placed to single and poly layer in plastic tray, and then changes of their weights were measured during air dehydration at $50^{\circ}C,\;65^{\circ}C,\;and\;80^{\circ}C$. The dehydration time reaching to optimum moisture level for the pulverization of the yam slices were 10, 6, 3 hours(single layered) and 12, 7, 5 hours(multi layered) at the respective temperature. To inhibit browning at $80^{\circ}C$ air dehydration, water and steam blanching, microwave treatment effects were investigated on yam slices for 30 sec. and 60 sec. Steam blanching for 30 sec. was comparatively effective to inhibit browning of yam slices. Yam slices were immersed in single and combined browning inhibitor solutions and evaluated for browing degree during dehydration by the values of Hunter L, a, b and ${\Delta}E$. The most effective pretreatment to inhibit browning of yam slices was immersion In the solution containing 500 ppm of citric acid and 1000 ppm of cysteine for 1 min.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.5
• /
• pp.238-247
• /
• 2023

PURPOSE. The purpose of this study was to assess the effect of resin cement shade on the color of different novel ultratranslucent monolithic zirconia and lithium disilicate veneer materials. MATERIALS AND METHODS. For a total of 40 specimens, flat cylindrical discs with a 9-mm diameter and 0.5-mm thickness were created using CAD/CAM technology. The specimens were divided into five groups according to their material (n = 8) (e.max, Prettau, Aidite, Shofu and Dima) using A1 shade. Resin discs with the same diameter and shade as the specimens served as tooth-colored substructures. Three shades (neutral, light and warm) of resin cement try-in pastes (Variolink Esthetic LC) were used as the luting cement material. The color of each material group was measured before and after cementation using the three cement shades, and the CIE L^*a^*b^* coordinates were obtained with a spectrophotometer. Values for the translucency parameter (TP) and color change delta E (E) before (baseline) and after cementation of each specimen were determined. To compare differences among the material groups within each shade of cement and among various shades of cement within each material, the data were analyzed using one-way ANOVA and post hoc testing. RESULTS. Color coordinates L^*, a^* and b^* significantly changed after the application of try-in pastes relative to baseline values, with a noticeable decrease in lightness (L^*) (P < .05). A significant color change (ΔE) was observed in all tested materials after cementation, with ΔE values exceeding 3.3 (P < .05). Although TP changed after cementation for most materials tested, these changes were not statistically significant (P > .05). Shofu and Dima ceramics showed the lowest TP values, while Aidite and Prettau showed the highest TP values. For e.max, translucency decreased after cementation with neutral and warm shades, and it significantly increased after cementation with a light shade. CONCLUSION. The shade of cement significantly altered the final color of the ceramic veneer material to a level above the threshold at which the clinical perception of color change occurred (> 3.3). The TP was not influenced by the cement shade. The translucency levels of the novel ultratranslucent multilayer monolithic zirconia ceramics Aidite and Prettau were higher than that of the lithium disilicate e.max material.

• Journal of Aquaculture
• /
• v.1 no.1
• /
• pp.13-24
• /
• 1988

In order to investigate a reasonable rearing density and the possibility of high-density rearing, flounder, Paralichthys olivaceus, juveniles of 2.53$\pm$0.24 cm in total length and 1.12$\pm$0.12 cm in body height were used in this study. The initial rearing density of them was 10 (D10), 20 (D20), 30 (D30) and 40 (D40) individuals per 137.75 $cm^2$ of bottom area, respectively. Ranges of water temperature and specific gravity during the rearing period of 65 days were $21.0\~27.0^{\circ}C$ and 1.024$\~$1.026, respectively, showing relatively higher values than that of natural sea water. Dissolved oxygen during the rearing period was 5.4$\~$7.5 ml/$\iota$ and inorganic nitrate was 0.07$\~$0.48 ppm in $NH_4^+-N$, 0.006$\~$0.33 ppm in $NO_2^{-}-N$ and 3.89$\~$34.06 ppm in $NO_3^{-}-N$. Growth in total length and body height of the juveniles in four rearing density at the end of the experiment was 8.17$\pm$0.80 em and 4.16$\pm$0.39 em, the highest in D20 and 7.72$\pm$0.40 cm and 3.94$\pm$0.21 cm, the lowest in D10. Significant differences, however, were not recognized between the slope values of growth regressions in four rearing density. Slope values of the relative growth between total length and body height of the juveniles in four rearing density were 0.5346, the highest in D10 and 0.5165, the lowest in D30, but there were no significant differences in those values. Survival rate of juveniles at the end of the experiment was $90\%$ in D10, D20 and D30, but that of D40 was $75\%$. The relationship between total length X body height (X) and body surface area of ocular side (Y) to calculate the rate of Y to bottom area in rearing tank (covering rate) as an indicator of rearing density was expressed by a linear regression, Y=0.5994X+0.1840. Covering rate in four rearing density at the end of the experiment was ranged 1.2$\~$4.1 times. Judging from the covering rate above 4 times, it seems to be possible rearing the flounder juveniles in high-density.

• Korean Journal of Biological Psychiatry
• /
• v.21 no.3
• /
• pp.99-106
• /
• 2014

Objectives Previous studies suggest that the cannabinoid receptor 1 (CNR1) gene could be an important candidate gene for schizophrenia. According to linkage studies, this gene is located on chromosome 6q14-q15, which is known to harbor the schizophrenia susceptibility locus (locus 5, SCZ5, OMIM 803175). The pharmacological agent delta-9-tetrahydrocannabinol (${\Delta}$-9-THC) seems to elicit the symptoms of schizophrenia. The association between CNR1 polymorphisms and schizophrenia is actively being investigated, and some studies have linked the AAT-trinucleotide repeats in CNR1 to the onset of schizophrenia. In this study, we have investigated the association between the AAT-trinucleotide repeats in CNR1 and schizophrenia by studying schizophrenia patients and healthy individuals from Korea. Methods DNA was extracted from the blood samples of 394 control subjects and 337 patients diagnosed with schizophrenia (as per the Diagnostic and Statistical Manual of Mental Disorders, fourth edition criteria). After polymerase chain reaction amplification, a logistic regression analysis, with age and gender as the covariates, was performed to study the variations in the AAT-repeat polymorphisms between the two groups. Results In total, 8 types of trinucleotide repeats were identified, each containing 7, 8, 10, 11, 12, 13, 14, and 15 repeats, respectively. $(AAT)_{13}$ allele was most frequently observed, with a frequency of 33.6% and 31.6% in the patient and control groups, respectively. The frequency of the other repeat alleles in the patient group (in the decreasing order) was as follows : $(AAT)_{13}$ 33.6%, $(AAT)_{14}$ 21.6%, $(AAT)_{12}$ 18.5%, and $(AAT)_{7}$ 11.1%. The frequency of the repeat alleles in the control group (in the decreasing order) was as follows : $(AAT)_{13}$ 31.6%, $(AAT)_{14}$ 24.5%, $(AAT)_{12}$ 17.2%, and $(AAT)_{7}$ 11.6%. However, there were no significant differences in the AAT-repeat polymorphisms of the CNR1 gene between the patient group and the control group. Conclusions Although our study revealed no significant association of the AAT-repeat polymorphism of the CNR1 gene with schizophrenia, it will serve as a good reference for future studies designed to examine the cannabinoid hypothesis of schizophrenia.