• 한국재료학회지
• /
• 제15권3호
• /
• pp.177-182
• /
• 2005

Large amounts of the waste SiC sludge containing small amounts of Si and organic lubricant were produced during the wire cutting process of the single silicon crystal ingots. The waste SiC sludge was purified by the washing process and the purified SiC powders were used to fabricate continuously porous $SiC-Si_3N_4$ composites using a fibrous monolithic process, in which carbon, $6wt\%\;Y_2O_3-2\;wt\%\;A1_2O_3$ and ethylene vinyl acetate were added as a pore-forming agent, sintering additives, and binder, respectively. In the burning-out process, carbon was fully removed and continuously porous $SiC-Si_3N_4$ composites were successfully fabricated. The green bodies containing SiC, Si particles and sintering additives were nitrided at $1410^{\circ}C$ in a flowing $N_2+10\%\;H_2$ gas mixture. Continuously porous composites were combined with SiC, ${\alpha}Si_3N_4,\;\beta-Si_3N_4$ and a few $\%$ of Fe phases. The pore size of the 2nd and the 3rd passed $SiC-Si_3N_4$ composites was $260\;{\mu}m$ and $35\;{\mu}m$ in diameter, respectively.

• 한국광물학회지
• /
• 제10권2호
• /
• pp.105-113
• /
• 1997

Mineral description and mineralogical characterization were made for the wellsite, a barrian zeolite, which found as diagenetic alterations in the Miocene pyroclastic rocks in Gampo area. The wellsite occurs together with clinoptilolite, smectite and apatite as euhedral crystallites (0.2~0.4mm) forming interpenetraion twinning in the vesicles of altered pmice fragments. Compared to other reported wellsites, the wellsite is rather silicic (Si/(Al+Fe): 3.12-3.16) and Ca-rich. Unit cell dimensions and chemical formular determined from XRD, EMPA and TGA data are as follows:a=9.883$\AA$, b=14.204$\AA$, c=8.677$\AA$, $\beta$-124.764$^{\circ}$, (Ba0.57K0.36)(Ca1.18Na0.04)Al3.9Si12.1O32.13.9H2O.The cation composition of the Gampo wellsite, which shows an exchange reaction in the form of Ba2++Ca2+=2(K++Na-), is deviated far from the compositional range of a phillipsite-harmotome series. Due to higher abundance of divalent cations (Ca, Ba) and si in the wellsite, cimpared to those of the phillipsite and harmotome reported in other areas, the zeolite seems to be characteristic of higher water content (18.7 wt%) and higher thermal stability. XRD, chemical and thermo-chemical results of the wellsite reflects that wellsite is rather a Ba- and Ca-rich end member of a phillipsite-harmotome-wellsite series than an intermediate phase of phillipsite-harmotome series or a barrian variety of phillipste.

• 소성∙가공
• /
• 제27권6호
• /
• pp.339-346
• /
• 2018

This study investigated the microstructure and wear properties of extruded hyper-eutectic Al-Si (15wt.%) alloy in an engine oil environment. The wear mechanism of the material was also analyzed and compared to conventional gray cast iron. In microstructural observation results of Al-15wt.%Si alloy, primary Si phase ($45.3{\mu}m$) and eutectic Si phase ($3.1{\mu}m$) were found in the matrix, and the precipitations of $Mg_2Si({\beta}^{\prime})$, $Al_2Cu({\theta}^{\prime})$ and $Al_6(Mn,Fe)$ were also detected. In the case of gray cast iron, ferrite and pearlite were observed. It was also observed that flake graphite ($20-130{\mu}m$) were randomly distributed. Wear rates were lower in the Al-Si alloy as compared to those of gray cast iron in all load conditions, confirming the outstanding wear resistance of Al-15wt.%Si alloy in engine oil environment. In the $4kg_f$ condition, the wear rate of gray cast iron was $6.0{\times}10^{-5}$ and that of Al-Si measured $0.8{\times}10^{-5}$. The microstructures after wear of the two materials were analyzed using scanning electron microscope (SEM) and electron backscatter diffraction (EBSD). The primary Si and eutectic Si of Al-Si alloy effectively mitigated the abrasive wear, and the Al matrix effectively endured to accept a significant amount of plastic deformation caused by wear.

• 시멘트
• /
• 통권51호
• /
• pp.20-30
• /
• 1973

1) electron-microprobe를 응용하여 $CaO-SiO_2-Al_2O_3$ 계에서 생성한 $C_2S$, $C_3S$ 에 존재하는 sulfate의 solid, solution을 정량적으로 구할 수 있었으며 이 결과로 $C_2S$ 에 $Al_2O_3$, $SO_3$ 등이 solid soln 등으로 침적되고 이들이 $C_3S$의 생성을 억제한다는 mechanism이 확인되었다. 2) phase equilibrium(상평형)에 의하면 $Na_2SO_4$, $K_2SO_4$는 mineralizer로서 작용하며 $C_3S$ 의 생성을 돕는다. 그러나 $K_2SO_4$ 와 $Al_2SO_3$ 가 결합상태로 존재할 경우는 1,400 $^{\circ}C$에서 광범위한 liquid를 생성하며 quenching하면 glass질과 $\beta-C_2S$ 만이 얻어지고 $C_3S$ 는 생성되지 않는다. 또 이를 1,250 $^{\circ}C$ 까지 서냉하면 $C_2S$ 와 Ca, K, Al, S, 등을 함유한 새로운 물질이 생성된다. 3) $CaO-SiO_2-Al_2O_3-Fe_2O_3$ 계에서 $C_3S$ 의 생성에 미치는 $Na_2SO_4$, $K_2SO_4$ 의 영향을 실험실적으로 검토한 결과 complex interaction이 확인되었으며 $Na_2SO_4$ 는 어떤 경우에는 mineralizing effect를 상실한다는 재미 있는 사실이 발견되었다.

• 자원리싸이클링
• /
• 제13권3호
• /
• pp.19-26
• /
• 2004

회중석 광석의 부유선별 공정에서 발생된 폐광미를 보통포틀랜드시멘트의 원료로 이용하기 위하여 폐광미의 사용량에 따른 조합원료 및 시멘트 클링커의 특성을 연구하였다. 폐광미에는 68.8%의 $_2$, 8.6%의 $Al_2$$O_3$, 10.8%의 Fe$_2$$O_3$, 5.0%의 CaO가 함유되어 있고, 주로 $\alpha$-quartz, muscovite, clinochlore 등으로 존재하며, 88$mu extrm{m}$ 잔사가 약 8.0% 정도 이다. 석회석, 전로슬래그, 플라이애쉬, 폐광미 등의 조합원료를 LSF: 91.0, SM: 2.60, IM: 1.60의 modulus로 혼합하여 클링커를 합성한 결과, 조합원료의 소성지수는 50.7정도이고, 클링커에 함유된 $C_3$S 및 $\beta$-C$_2$S의 결정크기는 15∼35$\mu\textrm{m}$로, 폐광미를 조합원료에 약 3.8%까지 사용할 수 있었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.152-152
• /
• 2017

Titanium and its alloys have been widely used for biomedical applications. However, the use of the Ti-6Al-4V alloy in biomaterial is then a subject of controversy because aluminum ions and vanadium oxide have potential detrimental influence on the human body due to vanadium and aluminum. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element,such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}$-stabilizer and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. Therefore, in this study, Si and Mg coatings on the hydroxyapatite film formed Ti-29Nb-xHf alloys by plasma electrolyte oxidation has been investigated using several experimental techniques. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. The electrolyte was Si and Mg ions containing calcium acetate monohydrate + calcium glycerophosphate at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.

• Bulletin of the Korean Chemical Society
• /
• 제10권2호
• /
• pp.191-196
• /
• 1989

We obtained the new complexes, $Fe{\eta}^4-R,R'-TPSCp](CO)_3$(R,R'-TPSCp = 1,1-disubstituted 2,3,4,5-Tetraphenyl-1-Silacyclopenta-2,4-diene; R = Ph, R' = Cl, R = R' = Cl) from the reaction of the corresponding R,R'-TPSCp with ironpentacarbonyl under reflux in toluene. Also, the analogous complexes with R = R' = Me and R = Me, R' = Cl were obtained in an identical manner. We have determined the crystal structure of $Fe[Ph(Cl)-TPSCp](CO_)3$ by using Mo ka, ${\lambda}$ = 0.71069${\AA}$, where the unit cell was found to be monoclinic with a = 9.042 (6)${\AA}$, b = 19.870 (9)${\AA}$, c = 17.426 (9)${\AA}$ and ${\beta}$ = 96.28(4)$^{\circ}$. The butadiene moiety of TPSCp ring is planar and the dihedral angle of the butadiene plane and C4-Si-C25 plane was opened up to 41.8$^{\circ}$. The C-C distances in the butadiene moiety were found to be 1.4346, 1.462, and 1.440 ${\AA}$, respectively. It may be said that the four ${\pi}$-electrons are delocalized over the four carbons in five membered ring through coordination with ironcarbonyl. In this complex Fe is either in distorted tetrahedron environment with the centroid of the four C-atom butadiene moiety and three carbons of the three carbonyls or in distorted square-pyramidal environment with two midpoints of double bonds of the butadiene moiety and two carbons of carbonyl defining the base of the pyramid and the carbon of remaining carbonyl the apex.

• 한국결정성장학회지
• /
• 제34권1호
• /
• pp.30-35
• /
• 2024

수소에너지 생산을 위한 물분해 시스템의 효율을 향상시키기 위해서는, 수소발생반응(HER)과 산소발생반응(OER) 각각에서 촉매로 인한 전기화학적 반응에서의 높은 과전압의 감소가 수반되어야 한다. 그 중에서도 전이금속 기반의 화합물들은 현재 상용되고 있는 백금 등의 귀금속을 대체할 촉매 재료로써 주목받고 있다. 본 연구에서는, 저렴한 금속 다공성 소재인 니켈폼(Ni foam)을 지지체로 사용하고, 수열합성 공정을 통해 Fe-doped β-Ni(OH)₂ 마이크로결정을 합성하였다. 또한 OER 특성을 향상시키기 위하여 Mo을 동시도핑하여 합성된 Fe-Mo co-doped β-Ni(OH)₂ 마이크로결정의 형상, 결정구조 및 수전해 특성의 변화를 관찰하였으며, 상용 수전해 시스템의 촉매로서의 적용가능성을 검토하였다.

• 천문학회지
• /
• 제32권1호
• /
• pp.55-63
• /
• 1999

NGC 6537 is an extremely high excitation bipolar planetary nebula. It exhibits a huge range of excitation from lines of [N I] to [Si VI]or [Fe VII], i.e. from neutral atoms to atoms requiring an ionization potential of $\~$167eV. Its kinematical structures are of special interest. We are here primarily concerned with its high resolution spectrum as revealed by the Hamilton Echelle Spectrograph at Lick Observatory (resolution $\~0.2{\AA}$) and supplemented by UV and near-UV data. Photoionization model reproduces the observed global spectrum of NGC 6537, the absolute H$\beta$ flux, and the observed visual or blue magnitude fairly well. The nebulosity of NGC 6537 is likely to be the result of photo-ionization by a very hot star of $T_{eff} \~ 180,000 K$, although the global nebular morphology and kinematics suggest an effect by strong stellar winds and resulting shock heating. NGC 6537 can be classified as a Peimbert Type I planetary nebula. It is extremely young and it may have originated from a star of about 5 $M_{\bigodot}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.23-25
• /
• 2001

In this work, the $Ta_2O_5$ thin films were deposited on Pt/n-Si substrate by reactive magnetron sputtering and the RTA treatment at temperatures range from 650 to $750^{\circ}C$ in $O_2$ and vacuum. X-ray diffraction analysis, FE SEM, dielectric properties and leakage current density have been used to study the structural and electrical properties of the $Ta_2O_5$ thin films. XRD result showed that as- deposited films were amorphous and the annealed films crystallized (<$700^{\circ}C$) into ${\beta}-Ta_2O_5$. The crystallinity increased with temperature in terms of an increase in the intensity of the diffracted peaks(${\beta}-Ta_2O_5$) and annealing in oxygen reduced defect dang1ing Ta-O bonds. As deposited $Ta_2O_5$ films show the leakage current density $10^{-7}$ to $10^{-8}$ (A/$cm^2)$ at low electric fields (<200 kV/cm) However, it was found leakage current density of $Ta_2O_5$ thin films decreased with $O_2$ ambient annealing. The dielectric constant of the as deposited $Ta_2O_5$ thin films was ${\varepsilon}_r$ $9{\sim}11$ but the dielectric constant was increased after RTA treatment in $O_2$ ambient more then in vacuum.