• Journal of the Korean institute of surface engineering
• /
• v.41 no.2
• /
• pp.69-75
• /
• 2008

Electrochemical behaviors of surface modified and MC3T3-E1 cell cultured Ti-30Ta alloys have been investigated using various electrochemical methods. The Ti alloys containing Ta were melted by using a vacuum furnace and then homogenized for 6 hrs at $1000^{\circ}C$. MC3T3-E1 cell culture was performed with MC3T3-E1 mouse osteoblasts for 2 days. The microstructures and corrosion resistance were measured using FE-SEM, XRD, EIS and potentiodynamic test in artificial saliva solution at $36.5{\pm}1^{\circ}C$. Ti-Ta alloy showed the martensite structure of ${\alpha}+{\beta}$ phase and micro-structure was changed from lamellar structure to needle-like structure as Ta content increased. Corrosion resistance increased as Ta content increased. Corrosion resistance of cell cultured Ti-Ta alloy increased predominantly in compared with non cell cultured Ti- Ta alloy due to inhibition of the dissolution of metal ion by covered cell. $R_p$ value of MC3T3-E1 cell cultured Ti-40 Ta alloy showed $1.60{\times}10^6{\Omega}cm^2$ which was higher than those of other Ti alloy. Polarization resistance of cell-cultured Ti-Ta alloy increased in compared with non-cell cultured Ti alloy.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.218-223
• /
• 1998

Casein was hydrolyzed by alcalase to produce iron binding peptide (IBP). IBP was effectively separated from casein hydrolysates by immobilized $Fe^{3+}$ affinity chromatography and further purified by reverse phase chromatography. $25,\;50\;and\;100\;{\mu}g/mL$ of IBP solubilized $4.2,\;5.7\;and\;7.1\;{\mu}g$ of ferric at duodenum condition $(pH\;6,\;37^{\circ}C)$, respectively. According to the result of MALDI analysis, molecular weight of IBP was determined to 2,175 dalton. IBP was mainly composed of proline (24.5 mol%), lysine (15.7 mol%), and glutamine or glutamic acid (14.9 mol%) and its N-terminal sequence was Met-Ala-Pro-Lys-His. According to the information obtained from molecular weight, amino acids composition and N-terminal sequence of IBP, it was evident that IBP was from f102-119 of ${\beta}-casein$.

• Journal of the Korean Ceramic Society
• /
• v.33 no.1
• /
• pp.1-6
• /
• 1996

A single phase Ba2(Ti8,472Zr0.528)O20 was prepared by the oxalate method from aqueous solution of BaCl2 TiCl4 and ZrOCl2. The structure ananlysis has been carried out by Rietveld analysis method at room temperature. Powder X-ray data of Ba2(Ti8,472Zr0.528)O20 was indexed with the triclinic lattice(a=7.4587 $\AA$ b=14.0672 $\AA$, c=13.3327 $\AA$, $\alpha$=89.87, $\beta$=79.45 ${\gamma}$=84.46) The R (Residual) values of structure refinement were in a range between 10.00 and 8.00 This analysis proved that the added Zr occupied Ti sites in th structure of Ba2Ti9O20. Ba2(Ti8,472Zr0.528)O20 has excellent dielectric properties(dielectric constant K=40.49 at 5.42 GHz Q=4621) so that it can be used as good microwave dielectric materials.

• Animal cells and systems
• /
• v.16 no.6
• /
• pp.469-478
• /
• 2012

Sex hormones have long been considered to play an important role in bone turnover rate, periodontal diseases, and wound healing. We have studied the effect of porcine testis steroid extract (PTSE), an extract of porcine testes, which holds a good ratio of 19-nortestosterone (nandrolone), testosterone, androstenedione, $17{\beta}$-estradiol, and estrone, on the healing rate of a standardized full-thickness linear wound on the back of the rat. Skin punch or carbon dioxide ($CO_2$) laser methods were used to create the deep skin injury in two groups of animals. The animals were treated with the PTSE cream, control cream and Vaseline (control) to find out the effect in re-epithelialization, contraction, and formation of granulation and scar tissues. Histological examination after 21 days showed 100, 87.4, and 80.5% recovery of epidermis, dermis, and hypodermis, respectively in the PTSE-treated animals. Similarly, on the 15th day of treatment, complete healing of intact skin was observed in the PTSE cream-treated animals among the laser radiation group. Even though the beginning of re-epithelialization phase and completion of serum crust formation was also observed in the base cream- and Vaseline-treated animals respectively, the complete healing cycle was observed only in the PTSE-treated group. The white blood cell count in the PTSE-treated group showed that PTSE cream is nontoxic to animals.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.400-404
• /
• 2013

Grain boundary diffusion technique with $DyH_3$ nanoparticles was applied to fabricate Dy-less sintered Nd-Fe-B permanent magnets with high coercivity. The magnetic properties and microstructure of magnets were systematically studied. The coercivity and remanence of grain boundary diffusion magnet were improved by 60% and reduced by 7% compared with those of the original magnet, respectively. Meanwhile, both the remanence temperature coefficient (${\alpha}$) and the coercivity temperature coefficient (${\beta}$) of the magnets were improved after diffusion treatment. Investigation shows that Dy is preferentially enriched as (Nd, Dy)$_2Fe_{14}B$ phase in the surface region of the $Nd_2Fe_{14}B$ matrix grains indicated by the remarkable enhancement of the magneto-crystalline anisotropy field of the magnet. As a result, the magnet diffused with a small amount of Dy nanoparticles possesses enhanced coercivity without remarkably sacrificing its magnetization.

• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.326-333
• /
• 2008

Since the 1990s, the second generation of Zirconium alloys containing main alloy compositions of Nb, Sn and Fe have been used as a replacement of Zircaloy-4 (Zr-Sn-Fe-Cr), a first-generation Zirconium alloy, to meet severe and rigorous reactor operating conditions characterized by high-burn-up, high-power and high-pH operations. In this study, the mechanical properties and creep behaviors of Zr-Sn-Fe-Cr and Zr-Nb-Sn-Fe alloys were investigated in a temperature range of $450{\sim}500^{\circ}C$ and in a stress range of $80{\sim}150\;MPa$. The mechanical testing results indicate that the yield and tensile strengths of the Zr-Nb-Sn-Fe alloy are slightly higher compared to those of Zr-Sn-Fe-Cr. This can be explained by the second phase strengthening of the $\beta$-Nb precipitates. The creep test results indicate that the stress exponent for the steady-state creep rate decreases with the increase in the applied stress. However, the stress exponent of the Zr-Sn-Fe-Cr alloy is lower than that of the Zr-Nb-Sn-Fe alloy in a relatively high stress range, whereas the creep activation energy of the former is slightly higher than that of the latter. This can be explained by the dynamic deformation aging effect caused by the interaction of dislocations with Sn substitutional atoms. A higher Sn content leads to a lower stress exponent value and higher creep activation energy.

• Korean Journal of Materials Research
• /
• v.17 no.2
• /
• pp.100-106
• /
• 2007

The effects of $MgO-P_2O_5$ based sintering additive on the microstructure and material and biological properties of hydroxyapatite $(HAp,\;Ca_{10}(PO_4)_6(OH)_2)$ ceramic were investigated using XRD, SEM and TEM techniques. The $MgO-P_2O_5$ sintering additive improved the material properties and increased the grain size in the sintered HAp bodies. As the content of sintering additive increased over 4 wt%, a small amount of the HAp phase was decomposed and transformed to ${\beta}-TCP$. In the 2 wt% $MgO-P_2O_5$ content HAp sintered body, the maximum values of density and hardness were respectively about 3.10 gm/cc and 657 HV. However, the maximum fracture toughness in the HAp body containing 8 wt% $MgO-P_{2}O_{5}$ was about $1.02MPa{\cdot}m^{1/2}$ due to the crack deflection effect. Human osteoblast like MG-63 cells and osteoclast like raw 264.7 cells were well grown and fully covered all of the HAp sintered bodies. The osteoblast cells were grown with spindle-shaped and the osteoclast cells had a grape-like round shape.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.488-497
• /
• 1999

Probing Streptomyces albus ATCC 21838 chromosomal DNA with a proline tRNA sequence resulted in an isolation of a putative integrating element in the 6.4-kb EcoRI fragment. It was found that Streptomyces lividans TK-24 transformed with a cloned DNA fragment on a multicopy plasmid, produced a higher level of spore pigment and mycelial red pigment on a regeneration agar. Furthermore, the transformant S. lividans TK-24 produced a markedly increased level of undecylprodigiosin in a broth culture. A nucleotide sequence analysis of the cloned region revealed several open reading frames homologous to the integrases of integrating plasmids or temperate bacteriophages, signal-transducing regulatory proteins with a conserved ATP-binding domain, oxidoreductases ($\beta$-ketoacyl reductase), and an AraC-like transcriptional regulator. To examine the effect on antibiotic production, each coding region was overexpressed separately from the other genes in the region in S. lividans TK-24 with; pJHS3044 for the expression of the signal-transducing regulatory protein homologue, pJHS3045 for the homologue of oxidoreductase, and pJHS3051 for the homologue of the AraC-like transcriptional regulator. Phenotypic studies of S. lividans TK-24 strains harboring plasmids for the overexpression of individual genes suggested the following effects of the genes on antibiotic production: The oxidoreductase homologue stimulated the production of actinorhodin and undecylprodigiosin, which was influenced by the culture conditions; the homologue of the AraC-like transcriptional regulator was the most effective factor in antibiotic production within all the culture conditions tested; the signal-transducing regulatory protein homologue repressed the effect due to the homologue of the AraC-like transcriptional regulator, however, the antibiotic production was derepressed upon entering the stationary phase.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2001.12a
• /
• pp.38-47
• /
• 2001

L-theanine is a unique amino acid, found almost solely in tea plants. It is the main component responsible for the exotic taste of green tea. In our studies of L-theanine, we have found a variety of biological activities including relaxation and the alleviation of PMS. In general, animals generate very weak electric pulses on the surface of the brain, called brain waves. Brain waves are classified into four types, namely $\alpha$, $\beta$, $\delta$ and $\theta$-waves, based on their frequency. Brain waves correlate with individual mental conditions. For example, generation of $\alpha$-waves is considered an index of relaxation. In human volunteers, $\alpha$-waves were generated on the occipital and parietal regions of the brain surface within 40 minutes after the oral administration of 50 or 200 mg Suntheanine$^{TM}$ without causing drowsiness. Premenstrual Syndrome (PMS) is a symptom unique to women which appears in the luteal phase from the ovulation period through the first day of menstruation. It possesses characteristics of having a peak just prior to menstruation and disappearing 1 - 2 days following the start of menstruation. Symptoms of PMS are generally categorized as mental, physical and social symptoms. When comparing the reported Symptoms of PMS by the methods of MDQ score, the Suntheanine$^{TM}$ group was found to have a lower incidence of PMS symptoms, including physical, mental and social symptoms. Overall, a significant alleviation of PMS symptoms by the administration of 200 mg Suntheanine$^{TM}$ was observed. With the successful industrial production of L-theanine, we are now able to supply Suntheanine$^{TM}$, offering a tremendous opportunity for designing functional foods targeting relaxation and the alleviation of PMS.

• Journal of Korea Foundry Society
• /
• v.31 no.5
• /
• pp.293-301
• /
• 2011

Representative magnesium alloys applied to the die-casting are AZ91, AM60, etc., and the application of these alloys is restricted to components operating at moderate temperatures, due to grain boundary siding of ${\beta}$-phase($Mg_{17}Al_{12}$) at temperatures above $120^{\circ}C$. Heat-resistant magnesium alloys such as AE42, AE44 have been developed, but that have been too burdensome to produce because of the expensive rare earth materials. Research work for the development of low-priced heat-resistant magnesium alloy is actively in progress and positive results are being reported. This study aims to investigate the effect of Ca additions on mechanical properties of Mg-4Al-2Sn heat resistant magnesium alloys. Mg-4Al-2Sn alloys with Ca (0wt.%, 0.3wt.%, 0.7wt.%, 1wt.%) have been produced through the die-casting process for the development of low-priced heat-resistant magnesium alloy, and high temperature tensile tests are performed using the specimens. The results showed that mechanical properties of Mg-4Al-2Sn-xCa increased with the addition of Ca up to 0.7wt.% Ca and further addition of Ca deteriorated the mechanical properties of the alloys. A significant amount of porosity was observed at the sample with 1wt%. Ca and the longer freezing range of the alloy was believed to cause the formation of porosity.