• 생명과학회지
• /
• 제24권2호
• /
• pp.137-147
• /
• 2014

유근피(Cortex ulmi pumilae)는 항산화, 항염증, 항균, 항암 등 다양한 생리활성이 보고되어 있으며, 뛰어난 소염효과로 예로부터 약재로 사용되어 왔다. 본 연구에서는 3T3-L1 지방전구세포를 이용하여 유근피 추출물의 지방세포 분화에 미치는 영향과 그 기전을 검토하였다. 유근피 추출물을 분화유도제와 동시에 처리한 결과, 3T3-L1 지방전구세포의 세포질 내 triglyceride 생성을 농도의존적으로 감소시켰으며, 지방세포분화 관련 전사인자인 $C/EBP{\alpha}$, $C/EBP{\beta}$ 및 $PPAR{\gamma}$의 발현을 유의적으로 저하시켰다. 다음으로 유근피 추출물을 지방세포 분화 유도 단계별로 처리한 결과, 분화유도제와 동시에 처리한 경우 즉 분화 초기에 처리한 경우가 가장 효과적인 지방세포 분화 억제효능을 보였으며, 이 때 분화초기에 발현되는 $C/EBP{\beta}$의 발현량은 현저하게 감소되었다. 또한 유근피 추출물에 의해 mitotic clonal expansion 단계의 세포증식이 농도의존적으로 억제되는 것을 확인하였으며, 세포주기분석을 통해 G1 arrest를 유발함으로써 증식이 억제 된다는 것을 확인하였다. 또한, G1 arrest는 G1/S 전이 관련 단백질인 p21의 발현 증가, cyclin E의 발현 감소 및 Rb의 인산화 감소에 의한 것임을 확인하였다. 이러한 연구결과들로부터 유근피 추출물은 지방세포 분화 초기 단계에 작용하여 지방세포 분화 관련 전사인자의 발현을 억제하고 mitotic clonal expansion을 저해하여, 지방전구세포의 지방세포로의 분화를 억제하는 항비만 효능을 가지는 천연소재임을 확인하였으며, 따라서 본 연구는 향후 이를 활용한 지속적인 연구를 위한 기초자료로 그 가치가 매우 높을 것이라 생각된다.

• Industrial Engineering and Management Systems
• /
• 제10권3호
• /
• pp.185-190
• /
• 2011

A driver interacts directly with the car seat at all times. There are ergonomic characteristics that have to be followed to produce comfortable seats. However, most of previous researches focused on either static or dynamic condition only. In addition, research on car seat development is critically lacking although Malaysia herself manufactures its own car. Hence, this paper integrates objective measurements and subjective evaluation to predict seat discomfort. The objective measurements consider both static and dynamic conditions. Steven's psychophysics power law has been used in which after expansion; ${\psi}\;=\;a+b{\varphi}_s^{\alpha}+c{\varphi}_v^{\beta}$ where ${\psi}$ is discomfort sensation, ${\varphi}_s^{\alpha}$ is static modality with exponent ${\alpha}$ and ${\varphi}_v^{\beta}$ is dynamic modality with exponent ${\beta}$. The subjects in this study were local and the cars used were Malaysian made compact car. Static objective measurement was the seat pressure distribution measurement. The experiment was carried out on the driver's seat in a real car with the engine turned off. Meanwhile, the dynamic objective measurement was carried out in a moving car on real roads. During pressure distribution and vibration transmissibility experiments, subjects were requested to evaluate their discomfort levels using vehicle seat discomfort survey questionnaire together with body map diagram. From subjective evaluations, seat pressure and vibration dose values exponent for static modality ${\alpha}$ = 1.51 and exponent for dynamic modality ${\beta}$ = 1.24 were produced. The curves produced from the $E_{q.s}$ showed better $R_{-sq}$ values (99%) when both static and dynamic modalities were considered together as compared to Eq. with single modality only (static or dynamic only R-Sq = 95%). In conclusion, car seat discomfort prediction gives better result when seat development considered both static and dynamic modalities; and using ergonomic approach.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.301-307
• /
• 2012

SiAlON glasses are silicates or alumino-silicates, containing Mg, Ca, Y or rare earth (RE) ions as modifiers, in which nitrogen atoms substitute for oxygen atoms in the glass network. These glasses are found as intergranular films and at triple point junctions in silicon nitride ceramics and these grain boundary phases affect their fracture behaviour. This paper provides an overview of the preparation of M-SiAlON glasses and outlines the effects of composition on properties. As nitrogen substitutes for oxygen in SiAlON glasses, increases are observed in glass transition temperatures, viscosities, elastic moduli and microhardness. These property changes are compared with known effects of grain boundary glass chemistry in silicon nitride ceramics. Oxide sintering additives provide conditions for liquid phase sintering, reacting with surface silica on the $Si_3N_4$ particles and some of the nitride to form SiAlON liquid phases which on cooling remain as intergranular glasses. Thermal expansion mismatch between the grain boundary glass and the silicon nitride causes residual stresses in the material which can be determined from bulk SiAlON glass properties. The tensile residual stresses in the glass phase increase with increasing Y:Al ratio and this correlates with increasing fracture toughness as a result of easier debonding at the glass/${\beta}-Si_3N_4$ interface.

• 한국세라믹학회지
• /
• 제26권3호
• /
• pp.315-322
• /
• 1989

Li2O-Al2O3-SiO2 system glasses contained P2O5, TiO2 and ZrO2as the nucleating agents were melted and formed. The glass was subsequently heated first to nucleate and then to grow the crystals. At constant nucleating agent content the base glass compositions were varied and the influences of these variations on the crystallization behaviour were investigated. The study was made by measurement of thermal expansion coefficient, differential thermal analysis, X-ray diffraction analysis, scanning electron microscope observation and transmission measurement of crystallized glass specimen in visible region. It was shown that the content of crystalline phase decreased with increasing SiO2 content as well as decresing Li2O in the base glass compositions. As the result of X-ray diffrection analysis, the major crystal was $\beta$-quartz solid solution. The degree of crystallinity which was calculated using the noncrystalline scattering methods increased in S-shape with increasing heat treatment time. This change was similar to that in thermal expansion coefficient. The transmissions of 5mm thick samples were 80-90% in visible ray region.

• 청정기술
• /
• 제26권1호
• /
• pp.1-6
• /
• 2020

초임계 용액 급속팽창법(rapid expansion of supercritical solution, RESS)으로 몰시도민(molsidomine, MOL) 약물이 로딩 된 퍼아세틸-β-사이클로덱스트린(PAc-β-CD) 나노 입자를 제조하였다. 입자는 초임계 용액을 공기 중으로 급속하게 팽창시켜 제조하였다. MOL과 PAc-β-CD (0.5, 1 wt%)의 농도, 추출 온도(45 ~ 60 ℃), 모세관 노즐의 길이(5 ~ 20 mm) 및 내경(Inner diameter, ID) (50 ~ 150 μm), 그리고 분사 거리의 변화에 따라 형성된 입자의 크기와 모폴로지를 조사하였다. MOL과 PAc-β-CD의 상호작용을 ¹H-NMR 분광법으로 확인하였고, 입자 크기는 주사 전자 현미경으로 측정하였다. 온도를 45 ℃에서 60 ℃로 올리거나 노즐 내경을 150 μm에서 50 μm로 줄이면 입자 평균 크기가 증가하였으며, 반면에 일정한 압력(34.5 MPa)과 온도(45 ℃)에서 분사 거리를 늘리면 입자 평균 크기가 감소하는 효과를 나타내었다. 0.5 wt%의 PAc-β-CD 농도로서 초임계 공정을 진행한 결과, 모세관의 길이가 짧고(5 mm) 내경이 작은(50 μm) 조건에서 크기가 가장 작은(165 nm) 입자가 얻어졌다. 제조한 나노 입자는 오일 내에서 분산성과 용해도가 증가하였으며, 포접체 입자에서 MOL이 방출되는 시간이 지연되는 것을 확인하였다.

• Tuberculosis and Respiratory Diseases
• /
• 제45권4호
• /
• pp.835-845
• /
• 1998

연구배경: 유리규산(silica)이 폐장내로 흡입되면 폐장내 염증세포의 축적이 발생하고 폐실질과 간질에 섬유화가 발생한다. Silica가 폐장내로 흡입되면 대삭세포에 탐식되어 염증매개물을 분비한다. 대식세포에서 염증반응에 중요하게 관여히는 cytokines은 IL-1$\beta$, IL-6, TNF-$\alpha$ 등이 있으며 후기 섬유화에 관계하는 TGF-$\beta$ 등이 분비되어 폐섬유화의 진행과 유지에 중요한 역할을 한다. 그러나 silica에 의한 폐섬유화 과정에서 각 cytokine의 역할과 분비부위 시간에 따른 변화에 대해서는 아직 확실히 규명된 바 없다. 방 법: silica 투여시 폐섬유화증이 잘 유발되어지는 C57BL/6J(ref) mouse의 폐장내로 silica를 투여 후 1 일, 2 일, 7 일, 2 주, 4주, 8주, 12주째마다 폐장을 적출하여 시간에 따른 폐조직의 변화와 면역화학조직염색법을 이용하여 IL-1$\beta$, IL-6, TNF-$\alpha$, TGF-$\beta$ 단백 발현의 변화와 분비부위를 관찰하였다. 결 과: Silica군에서는 2주부터 육안적 소견의 변화가 관찰되었으며 8주째 변화가 가장 심하였고 초기에 염증세포의 침윤이 기관지와 세기관지 주위로 시작되어 8 주째는 기관지 주위의 심한 염증세포 침윤과 섬유화 결절에 의해서 기관지가 완전히 폐쇄되는 소견을 보였다. IL-6 의 발현은 혈관에서는 변화없이 지속적으로 발현되었고 시간 경과에 따라 기도상피세포와 혈판내피세포에서 IL-6 발현이 관찰되어 IL-6의 형성은 혈관에서 기도내로 이동하는 염증세포에 의해 과형성됨을 알 수 있었다. IL-1는 정상군의 혈관내피세포에서 1도 정도의 경한 발현이 있은 후 큰 변화없이 12주까지 지속적으로 발현되었다. TNF-$\alpha$는 기도상피세포에서 발현이 점차 증가하였고 2주째 기관지 주위에 염증세포의 침윤이 심해지면서 형성된 결절에서 강한 발현이 나타난 후 8주까지 지속되었다. TGF-$\beta$는 기관지 주위에서 초기에 발현을 관찰할 수 없었으나 염증 세포의 침윤이 심해지는 2 주째부터 강한 발현이 나타난 후 12주까지 지속적으로 높은 발현을 나타내었다. 결 론: Silica를 폐장내 투여시 IL-1$\beta$, IL-6, TNF-$\alpha$가 조기에 분비되어 모두 폐섬유화의 염증반응에 관여하고 TGF-$\beta$는 후기의 폐섬유화에 유지에 관여할 것으로 추정되며 silica에 의한 폐섬유화의 조절방법으로는 TNF-$\alpha$의 형성조절이 좋은 방법이 될 수 있을 것으로 사료된다.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.127-133
• /
• 2013

Porcelain with high thermal shock resistance was successfully fabricated by a lithium solution infiltration method with a lithium hydroxide solution. Lithium hydroxide solutions having various lithium concentrations were infiltrated into pre-sintered porcelain bodies. The porcelain sample infiltrated by the 9 wt% lithium solution and heat treated at $1250^{\circ}C$ for 1 h showed a low thermal expansion coefficient of $1.0{\times}10^{-6}/^{\circ}C$ with excellent thermal shock resistance. The highly thermally resistant porcelain had a well-developed ${\beta}$-spodumene phase with the general phases observed in porcelain. Furthermore, the porcelain showed a denser structure of $2.41g/cm^3$ sintering density and excellent whiteness in comparison with commercial thermally resistible porcelains. The lithium hydroxide in the samples readily reacted with moisture, and liquid phase reactants were formed during the fabrication process. In the case of an excess amount of lithium in the sample body, the lithium reactants were forced to the surface and re-crystallized at the surface, leaving large pores beneath the surface. These phenomena resulted in an irregular structure in the surface area and led to cracking in samples subjected to a thermal shock test.

• 한국주조공학회지
• /
• 제26권3호
• /
• pp.123-128
• /
• 2006

Mechanical and thermal properties of spray-cast hypereutectic Al-20wt.%Si-xwt.%Fe alloys (x=0, 1, 3, 5) were investigated. After the spray-casting, hot extrusion was performed at $400^{\circ}C$. Intermetallic compound (${\beta}-Al_5FeSi$) and primary Si are observed in the spray-cast aluminum alloys. The size of primary Si and intermetallic compound of the spray-aluminum alloys became finer and more uniformly distributed than that of the permanent mold cast ones. Ultimate tensile strength of the spray-cast aluminum alloys increased by increasing Fe contents, but that of the permanent mold cast aluminum alloys decreased by increasing Fe contents possibly due to increased amount of coarse intermatallic compound. The coefficient of thermal expansion (CTEs) of the aluminum alloys became lower with finer primary Si and intermetallic compound, and this is attributed to the increased amount of interfacial area between the aluminum matrix and the phases of finer Si and intermetallic compound.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.275-285
• /
• 1996

The effect of heat-treatment on catalytic crystallization in $LI_2O-Al_2O_3-SiO_2$ glass system over its glass transition temperature was investigated. Glass composition $4Li_2O{cdot}22AL_2O_3{cdot}66SiO_2{cdot}2TiO_2{cdot}2.5ZrO_2{cdot}1.5P_2O_5{cdot}1.0Na_2O{cdot}1.0As_2O_3$ (wt%) was selected and heat-treated at different heating conditions to obtain transparent glass-ceramic. Nucleation and crystallization behaviour of this composition were estimated by differential thermal analysis (DTA) and X-ray diffractometer (XRD) and its thermal expansion coefficients were measured by Dilatometer. As a result, glass transition temperature was $730^{\circ}C$ and two maximum nucleation temperatures were estimated at $730^{\circ}C$ and 82$0^{\circ}C$ using JMA(Johson-Mehl-Avrami) equation by DTA. $ZrTiO_4$ $\beta$-Quartz solid solution and $\beta$-Spodumene crystals were identified by XRD. The optimum crystallization temperature was 92$0^{\circ}C$ and three step heating schedule was expected to be useful to obtain transparent glass-ceramic.

• 간호행정학회지
• /
• 제20권4호
• /
• pp.437-445
• /
• 2014

Purpose: The aim in this study was to identify head nurses' nursing performance according to their managerial competencies and professional nurse autonomy. Methods: From January 15 to January 31, 2013 a survey was distributed to 200 head nurses working in 5 tertiary hospitals in B city and J city. The response rate was 80% (160 responses). The survey content included the Managerial Competencies Scale (MCS), Schutzenhofer professional nurse autonomy Scale (SPNA), and Nursing Performance Scale (SPNA). Results: The score for MCS was 4.53, for SPNA, 177.05, and for SPNA, 4.62. Nursing performance was related to managerial competencies (${\beta}=0.741$; p<.001; SE=0.059) and professional autonomy (${\beta}=0.135$; p=.010; SE=0.001). These factors accounted for 64.8~67.3% of the variability in nursing performance. Conclusion: Results indicate that head nurses' performance would be improved through increased nursing managerial competencies and expansion of professional autonomy suggesting a need to develop work systems designed to achieve high managerial competency and professional autonomy in head nurses.