• 대한전자공학회논문지SD
• /
• 제38권7호
• /
• pp.473-478
• /
• 2001

강유전 물질인 Pb/sub 0.99/［(Zr/sub 0/6Sn/sub 0.4/)/0.9/Ti/sub 0.1/］0.98/Nb/sub 0.02/O₃(PNZST) 박막을 10 mole%의 과잉 PbO가 첨가된 타겟을 이용하여 La/sub 0.5/Sr/sub 0.5/CoO₃(LSCO)/Pt/Ti/SiO₂/Si 기판상에 RF 마그네트론 스퍼터링 방법으로 증착하였다. 증착된 박막에 대하여 온도와 시간을 다양하게 변화시키면서 급속 열처리(rapid thermal annealing) 한 후, 그 결정성과 전기적 특성을 조사하였다. 80 W의 RF 전력, 500 ℃의 기판온도에서 증착한 후, 급속 열처리된 박막이 페로브스카이트상으로 결정화되었으며, 650 ℃, 공기중에서 10초동안 급속 열처리된 박막이 가장 우수한 결정성을 나타내었다. 이러한 박막으로 제작된 PNZST 커패시터는 약 20 μC/㎠정도의 잔류 분극과 약 50 kV/cm 정도의 항전계를 나타내었으며, 2.2×10/sup 9/의 스위칭 후에도 잔류분극의 감소는 10 %미만이었다.

• 한국식품영양과학회지
• /
• 제38권12호
• /
• pp.1760-1766
• /
• 2009

찹쌀가루, 쌀가루, 탈지콩가루 및 소금을 첨가하여 수분함량 16-18%, screw 속도 300 및 400 rpm, feed rate 43.4kg/hr 조건에서 extruder로 제조한 유과바탕의 특성은 다음과 같았다. 길이, 직경 및 비용적은 extruder에서 공급되는 수분함량이 낮을수록 크게 나타났다. 유과바탕의 색도 중 L값은 수분함량이 많을수록 높은 반면, a값 및 b값은 낮게 나타났다. 유과바탕의 수분흡착지수는 수분 함량이 많을수록 유의적으로 증가되었다. 유과바탕의 x-ray 회절도는 수분함량 16% 및 17%에서는 B도형을 나타냈으며, 수분함량 18%에서는 A도형을 나타냈다. 상대적 결정화도와 breaking strength는 수분함량 16%에서 가장 낮게 나타났으며, 17%, 18%에서는 유의적인 차이가 없었다. TPA에서 hardness는 수분함량 16% 및 17%, screw 속도 400 rpm에서 가장 낮게 나타났다. 유과바탕의 단면을 40배로 확대하여 관찰한 유과바탕은 수분함량이 증가할수록 기공의 크기가 컸고 세포벽은 두꺼웠다. 유과바탕의 관능검사 결과 수분함량에 따른 색과 향미에 대한 기호도는 유의적인 차이는 없었으나, 맛, 외관, 입안에서의 느낌 및 전체적인 선호도는 수분함량이 낮을수록 기호도는 높게 나타났다.

• 전기화학회지
• /
• 제3권4호
• /
• pp.200-203
• /
• 2000

Microwave plasma chemical vapor deposition을 이용하여 붕소가 도핑된 전도성 다이아몬드 박막을 제조하였다. 탄소원으로는 아세톤과 메탄올을 사용하였으며, 붕소원으로는 $B_2O_3$를 사용하고, 운반가스로는 수소를 사용하였다. 이때 붕소의 도핑농도는 약 $10^2ppm\;(B/C)$이였다. Si 기질 각 부분의 온도와 플라즈마에서의 거리를 다르게 하기 위해서 Si 기질을 배치함에 있어 약$10^{\circ}$를 기울여 다이아몬드 박막을 성장시켰다. 실험결과 모두 동일한 조건 이였으나 같은 Si 기질 위에 높이에 따른 온도구배가 형성되었으며, 그에 따라 다이아몬드의 결정 또한 각기 달랐다. 다이아몬드 박막에 나타난 결정형태의 분포는 약 $3\~4$부분으로 나뉘어 있었다 제조된 다이아몬드 박막의 특성을 확인하기 위해 Raman spectrum을 이용해 다이아몬드의 결정성을 확인하였고, 표면의 형태를 관찰하기 위해 현미경을 사용하였다. 입자의 크기는 각기 다른 Si기질의 높이에 의한 온도구배로 인하여, 기질의 높이에 따라 서서히 달라졌다. 다이아몬드 박막의 Raman spectrum측정결과 $1334cm^{-1}$에서 강한 peak가 발견되었으며, 이것은 결정성 다이아몬드의 일반적인 특성 이였다. Si 기질 중 낮은 곳에 위치한 부분의 Raman spectrum은 비다이아몬드의 peak인 $1550cm^{-1}$ 부근에서 넓게 peak가 상승된 것이 관찰되었다.

• 한국재료학회지
• /
• 제21권4호
• /
• pp.192-195
• /
• 2011

The electro-deposition of compound semiconductors has been attracting more attention because of its ability to rapidly deposit nanostructured materials and thin films with controlled morphology, dimensions, and crystallinity in a costeffective manner (1). In particular, low band-gap $A_2B_3$-type chalcogenides, such as $Sb_2Te_3$ and $Bi_2Te_3$, have been extensively studied because of their potential applications in thermoelectric power generator and cooler and phase change memory. Thermoelectric $Sb_xTe_y$ films were potentiostatically electrodeposited in aqueous nitric acid electrolyte solutions containing different ratios of $TeO_2$ to $Sb_2O_3$. The stoichiometric $Sb_xTe_y$ films were obtained at an applied voltage of -0.15V vs. SCE using a solution consisting of 2.4 mM $TeO_2$, 0.8 mM $Sb_2O_3$, 33 mM tartaric acid, and 1M $HNO_3$. The stoichiometric $Sb_xTe_y$ films had the rhombohedral structure with a preferred orientation along the [015] direction. The films featured hole concentration and mobility of $5.8{\times}10^{18}/cm^3$ and $54.8\;cm^2/V{\cdot}s$, respectively. More negative applied potential yielded more Sb content in the deposited $Sb_xTe_y$ films. In addition, the hole concentration and mobility decreased with more negative deposition potential and finally showed insulating property, possibly due to more defect formation. The Seebeck coefficient of as-deposited $Sb_2Te_3$ thin film deposited at -0.15V vs. SCE at room temperature was approximately 118 ${\mu}V/K$ at room temperature, which is similar to bulk counterparts.

• 한국식품과학회지
• /
• 제31권5호
• /
• pp.1171-1177
• /
• 1999

쌀전분으로부터 분리한 아밀로오스와 아밀로펙틴이겔을 형성할 수 있는 최저농도로 아밀로오스와 아밀로펙틴 혼합겔을 제조하여 주사전자현미경과 X-선 회절기를 이용하여 겔 구조를 관찰하였다. 겔을 형성할 수 있는 최저농도인 용해성 아밀로오스 1.08% 농도에 아밀로펙틴을 $1.5%{\sim}7%$ 첨가하면 겔 그물망구조가 잘 형성되었고, 아밀로펙틴을 2%와 3% 첨가한 겔은 저장에 따라 $2{\theta}\;=\;17.0^{\circ}$에서 피크가 커졌다. 15% 아밀로오스/아밀로펙틴 혼합겔을 저장했을 때 아밀로오스 함량이 높을수록 단단하고 안정된 그물망구조를 이루었으며 생전분에서의 겔형성 양상과는 달리 아밀로오스와 아밀로펙틴이 함께 겔메트릭스를 이루는데 참여하는 것으로 생각되었고, 아밀로오스 함량이 증가할수록 $2{\theta}\;=\;17.0^{\circ}$에서 피크의 크기와 결정강도는 커졌다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.66-79
• /
• 2008

Several oxides have recently been reported to have resistance-switching characteristics for nonvolatile memory (NVM) applications. Both binary and ternary oxides demonstrated great potential as resistive-switching memory elements. However, the switching mechanisms have not yet been clearly understood, and the uniformity and reproducibility of devices have not been sufficient for gigabit-NVM applications. The primary requirements for oxides in memory applications are scalability, fast switching speed, good memory retention, a reasonable resistive window, and constant working voltage. In this paper, we discuss several materials that are resistive-switching elements and also focus on their switching mechanisms. We evaluated non-stoichiometric polycrystalline oxides ($Nb_2O_5$, and $ZrO_x$) and subsequently the resistive switching of $Cu_xO$ and heavily Cu-doped $MoO_x$ film for their compatibility with modem transistor-process cycles. Single-crystalline Nb-doped $SrTiO_3$ (NbSTO) was also investigated, and we found a Pt/single-crystal NbSTO Schottky junction had excellent memory characteristics. Epitaxial NbSTO film was grown on an Si substrate using conducting TiN as a buffer layer to introduce single-crystal NbSTO into the CMOS process and preserve its excellent electrical characteristics.

• 약학회지
• /
• 제37권3호
• /
• pp.216-227
• /
• 1993

Complex formations of practically insoluble antelmintic drugs such as mebendazole (MBZ), albendazole (ABZ) and flubendazole (FBZ) with dimethyl-$\beta$-cyclodextrin (DM-$\beta$-CyD) and 2-hydroxypropyl-$\beta$-cyclodextrin (HP-$\beta$-CyD) together with $\alpha$-, $\beta$- and $\gamma$-cyclodextrins(CyDs) in duffered solutions were investigated by solubility method. $A_{L}$ type phase solubility diagrams were obtained in all cases except for the complexation (B$_{s}$, type) of FBZ with $\gamma$-CyD. The highest stability constants were obtained with DM-$\beta$-CyD, followed by $\alpha$-CyD > $\beta$-CyD > HP-$\beta$-CyD > $\gamma$-CyD for ABZ, and HP-$\beta$-CyD > $\gamma$-CyD > $\beta$-CyD > $\alpha$-CyD for FBZ at pH 1.2. On the other hand, solid dispersion systems of ABZ and FBZ with $\beta$- and DM-$\beta$-CyDs were prepared by solvent evaporation method and evaluated by dissolution, differential thermal analysis and powder x-ray diffractometry. The dissolution rates of ABZ- and FBZ-DM-$\beta$-CyD solid dispersions were much faster than those of drugs alone, corresponding physical mixtures and tablets on market both at pH 1.2 and 6.8. Although dissolution rates of all samples at pH 6.8 were by far lower than those obtained at pH 1.2, as explained by pH-solubility profiles for ABZ and FBZ, the dissolution rates at pH 6.8 of ABZ from $\beta$- and DM-$\beta$-CyD solid dispersions exceeded the respective equilibrium solubility (23.9 $\mu\textrm{g}$/ml). Fast dissolution of ABZ from solid dispersions with CyDs was attributed to the reduction of drug crystallinity and particle size which was supported by DTA and powder x-ray diffractometry. Consequently these results suggest that solid dispersion systems with CyDs may provide useful means to markedly enhance the solubility and dissolution of benzimidazole antelmintic drugs.

• Korea-Australia Rheology Journal
• /
• 제13권4호
• /
• pp.169-177
• /
• 2001

Morphological, thermal, rheological, and mechanical properties of reactive compatabilized blends of poly(butylene terephthalate) (PBT) and Polyamide-6 (PA) containing EGMA copolymer were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), advanced rheometric expansion system (ARES), and universal testing machine (UTM). From the results of thermal analysis by DSC, the melting point of the 30/70 PBT-PA blend was broadened after EGMA was added in the blends, since the enthalpy of melting of the PBT-PA somewhat decreased with the increase of EGMA content. From this result, it is suggested that the EGMA affected to the crystallization behavior and crystallinity of the PBT-PA blends. From SEM micrographs of the 70/30, 50/50, and 30/70 PBT-PA blends, the droplet size of the 30/70 PBT-PA blend was about 0.8 ${\mu}{\textrm}{m}$ which was smaller than that of the 50/50 and 70/30 PBT-PA blends. The complex viscosity of the 30/70 PBT-PA blend observed to be higher than that of the 50/50 and 70/30 PBT-PA blends. From the results of the morphology and rheological properties for the PBT-PA blends, it is suggested that the compatibility is increased in the 30/70 PBT-PA blend than the 50/50 and 70/30 PBT-PA blends. From the results of mechanical properties, it was found that the tensile strength of the 30/70 PBT-PA blend increased with the increase of EGMA up to 2 phr, while tensile strength of the blend in which EGMA content was higher than 2 phr decreased with the increase of EGMA content. From the results of morphological, thermal, rheological, and mechanical properties for the PBT-PA-EGMA blends, it is suggested that the EGMA could be used as a compatibilization role in the blends.

• 한국분말재료학회지
• /
• 제27권5호
• /
• pp.381-387
• /
• 2020

In this work, TiO₂ 3D nanostructures (TF30) were prepared via a facile wet chemical process using ammonium hexafluorotitanate. The synthesized 3D TiO₂ nanostructures exhibited well-defined crystalline and hierarchical structures assembled from TiO₂ nanorods with different thicknesses and diameters, which comprised numerous small beads. Moreover, the maximum specific surface area of TiO₂ 3D nanostructures was observed to be 191 ㎡g^-1, with concentration of F ions on the surface being 2 at%. The TiO₂ 3D nanostructures were tested as photocatalysts under UV irradiation using Rhodamine B solution in order to determine their photocatalytic performance. The TiO₂ 3D nanostructures showed a higher photocatalytic activity than that of the other TiO₂ samples, which was likely associated with the combined effects of a high crystallinity, unique features of the hierarchical structure, a high specific surface area, and the advantage of adsorbing F ions.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.29-35
• /
• 2013

A dense mixed ionic and electronic conducting ceramic membrane is one of the most promising materials because it can be used for separation of oxygen from the mixture gas. The $ABO_3$ perovskite structure shows high chemical stability at high temperatures under reduction and oxidation atmospheres. $BaCo_{1-x-y}Fe_xZr_yO_{3-{\delta}}$ (BCFZ) was well-known material as high mechanical strength, low thermal conductivity and stability in the high valence state. Glycine Nitrate Process (GNP) is rapid and effective method for powder synthesis using glycine as a fuel and show higher product crystallinity compared to solid state reaction and citrate-EDTA method. BCFZ was fabricated by modified glycine nitrate process. In order to control the burn-up reaction, $NH_4NO_3$ was used as extra nitrate. According to X-Ray Diffraction (XRD) results, BCFZ was single phase regardless of Zr dopants from y=0.1 to 0.3 on B sites. The green compacts were sintered at $1200^{\circ}C$ for 2 hours. Oxygen permeability, methane partial oxidation rate and hydrogen production ability of the membranes were characterized by using Micro Gas Chromatography (Micro GC) under various condition. The high oxygen permeation flux of BCFZ 1-451 was about $1ml{\cdot}cm^{-2}s^{-1}$. Using the humidified Argon gas, BCFZ 1-433 produced hydrogen about $1ml{\cdot}cm^{-2}s^{-1}$.