• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.1017-1018
• /
• 2009

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.363-370
• /
• 2018

The succulent plants of Echeveria genus are in increasing demand worldwide, but it is difficult to supply good quality young plants throughout the year because propagation efficiencies are depend on cultivar and environmental factors. This study was carried out to investigate the propagation efficiencies of leaf cutting in Echeveria cultivars at different LED light qualities in a closed-type plant factory system. Leaf cuttings cut from stock plants of six difficult-to-propagated cultivars 'Afterglow (AG)', 'Berkeley Light (BL)', 'Mason (MS)', 'Subsessilis Light (SL)', 'Cream Tea (CT)', and 'Ben Badis (BB)' were put into cutting media in the plant factory system maintained at a temperature of $24{\pm}2^{\circ}C$ and relative humidity of $60{\pm}10%$, and watered with over-head irrigation twice a week. Cuttings were irradiated with sole or mixed red (R, 660 nm), blue (B, 450 nm), green (G, 530 nm), and far-red (FR, 730 nm) LEDs as follows: R10, R8+B2, R5+B5, R7+B2+FR1, and R7+B2+G1. PPFD just above the cuttings was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and photoperiod was 16/8 (light/dark) hours. As a result, propagation efficiencies were dependent on cultivar. Rooting and shooting were relatively easy in 'SL' but shoot formation in 'AG' was very difficult. Light qualities from LEDs also affected plant regeneration. Light conditions with a higher ratio of B, R5+B5, R7+B2+FR1, and R7+B2+G1, promoted shoot formation and growth but inhibited rooting and root growth. R10 and R8+B2 with a higher ratio of R promoted rooting and root growth and inhibited shoot formation and growth of cuttings. In addition, the treatment with FR increased leaf size and biomass of the all plants. Therefore, further studies are needed to investigate the optimum compositions of LED light quality for the improvement of leaf cutting efficiency in difficultto-propagated Echeveria cultivars.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.431-435
• /
• 2009

This study was conducted to compare the effect of various LED and UVa light to enhanced coloration of paprika fruits cultivars; 'Special', 'Helsinki'. Immatured paprika fruits were irradiated with red LED, blue LED and UVa lights which were high intensity (red: $50{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, blue: $70{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, UVa: $3{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and low intensity (red: $20{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, blue: $40{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, UVa: $0.25{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$). The coloration of 'Special' cultivar was increased the fastest in high intensity UVa light for 2 days after treatment. There were no significantly difference among treatments except the low intensity UVa light. The coloration of 'Helsinki' was increased the fastest in blue LED light, and followed by red LED light and UVa light for 2 days after treatment. The $a^*/b^*$ value of 'Special' and $b^*$ value of 'Helsinki' that indicated the paprika fruit coloration were generally higher high intensity LED and UVa lights than low intensity LED and UVa lights. We couldn't find out any significantly different coloration effect among all treatments in final days of coloration. and rather than UVa treatment fruit shrunk the surface of paprika fruits.

• Electronics and Telecommunications Trends
• /
• v.25 no.5
• /
• pp.59-71
• /
• 2010

피부질환 치료를 위한 광선요법은 태양광, 레이저, 형광등, UV 램프 등 다양한 광원을 이용하여 광이 피부 내에서 생화학적 반응을 촉진하는 원리를 이용하여 피부 조직의 선택적 재생 또는 파괴 등을 통해 손상된 피부를 치료하는 광 의료 기술이다. 최근 발전하고 있는 LED 광원 기술은 광선요법에서 시용되어온 광원을 대체할 수 있는 기술로 각광을 받고 있다. 이에 본 고에서는 광선요법과 관련된 기초 원리를 살펴보고, LED가 피부질환 치료용 광원으로 사용될 때 고려되어야 하는 임상적, 기술적 문제점과 다양한 피부질환 치료에 있어서 LED 광원의 역할에 대해 살펴 보았다. 아울러, 피부질환 치료용 LED 치료기 관련 국내외 연구 개발 동향과 기업들이 출시한 LED 치료기의 특성을 살펴보았다. LED 치료기 관련 표준화 동향과 국내외 지식재산권 현황을 살펴보았으며, 향후 LED 기반의 피부질환 치료기의 개발 방향을 모색하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1586-1594
• /
• 2011

LED-ID (light emitting diode - identification) technology is the new paradigm in the identification technology environment. LED-ID system typically needs line of sight (LOS) that supports narrow FOV transceivers links to achieve high data rate. On the other hand, narrow FOV reduces the coverage area. Therefore, the number of tags is increased significantly to cover the whole area. In this case number of link switching is increased when the reader moves within whole coverage area. Link switching delay is the important factor for the moving reader to maintain the communication with high data rate and better QoS. In this paper we propose in literature a new link switching scheme and measure the link switching delay time for LED-ID system. The simulation results show that the proposed link switching scheme is a possible candidate for multi-tag LED-ID system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.672-678
• /
• 2013

In the recent year, along with the rapid development of LED technology, many applications using LEDs have been researched and indoor positioning is one of them. In particular, previous indoor positioning systems based on visible light communication combine triangulation manner such as AoA, ToA TDoA. But most of them needs transmitting unique ID of each LED panel. In this paper, we propose an non LED-ID based indoor positioning system in which the visible light radiated from LEDs is used to locate the position of receiver. Compared to current indoor positioning systems using LED light, our system has the advantages of simple implementation, low cost and high accuracy. Through the computer simulation, our system can achieve a high estimation accuracy of 3.6cm in average in the $5{\times}5{\times}3m^3$ room.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1246-1251
• /
• 2011

In this paper, BPSK-OFDM-based LED communication systems are applied to watermarking techniques, were studied on how to transfer the additional information data with at the same time as the transfer of LED communication data. For watermarking kasami code was used as spreading codes, and spread additional data is controlled by small signal level to be BPSK-OFDM does not affect the optical signal. BPSK-OFDM is added to an optical signal is transmitted. The performance of the spreading code as a kasami code is autocorrelation of the noise-free environment, under the noise environment was confirmed by autocorrelation. BPSK-OFDM-based LED communication system has been applied proposed technique throughout the simulation in analyzed to BER of BPSK-OFDM DER performance and watermark signal level according to signal size level of data. That was availability confirmed for watermarking data transmit techniques data as being analysis detection performance of watermarking information using LED communication according to the code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.2
• /
• pp.115-121
• /
• 2013

LED-ID (Light Emitting Diode-Identification) network is envisioned to be the next generation indoor wireless communication medium by which simultaneously high speed data transmission, identification, and illumination are possible. In spite of being extremely promising, it suffers from much impairment. Signals having different propagation paths can suffer from delays, and phase shifts which will eventually result interference. The probability of interference is also increased when communication links are established between a tag and several readers. Therefore it is necessary to reduce the interference in LED-ID network to ensure quality of service. It is possible to avoid interference by knowing the information about readers prior to assign the available spectrum. In this paper, we have proposed dynamic spectrum decision using cognitive radio concept. The simulation results justify that the proposed scheme is better than the conventional scheme.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.260-268
• /
• 2018

The aim of this study was to evaluate the effect of light quality using either monochromatic or combined LEDs on the growth and antioxidant accumulation of Agastache rugosa cultivated under hydroponics for 4 weeks. This experiment was performed in a controlled-environment room at $22{\pm}1^{\circ}C$ and $18{\pm}1^{\circ}C$ (day and night temperatures, respectively) and 50-70% relative humidity, with a provided photosynthetic photon flux density (PPFD) of $180{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and irradiated with either monochromatic (W10 and R10) or mixed LEDs (W2B1G1, R3B1, R2B1G1, and W2B1G1) with a differing ratio of each LED's PPFD and fluorescent lighting (FL: control) with a 16/8 h photoperiod. Fresh and dry weights were highest for plants grown under the W2B1G1 treatment. A. rugosa grown with R10 had the greatest plant height but the lowest SPAD among all treatments. The concentration of rosmarinic acid in plants grown under W2B1G1 was significantly higher than that of plants grown under other treatments. Tilianin content was significantly higher in R3B1 than in the other treatments. However, whole-plant rosmarinic acid and tilianin content was the highest under the W2B1G1 condition. To cultivate A. rugosa in a plant factory, mixed-LED light conditions with W2B1G1 is considered to be more advantageous for the growth and antioxidant accumulation of A. rugosa. It is though that the total whole-plant antioxidant content is more crucial for commercial use; the present study demonstrates the potential to achieve higher content of functional materials in plants through the selection of light quality.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.490-498
• /
• 2017

The in vitro growth of virus-free sweet potato [Ipomoea batatas (L.) Lam.] plantlets was investigated under different light sources: fluorescent lamp (control); red (660 nm), blue (460 nm), white light-emitting diodes (LED), and two mixtures of blue and red LED (R:B = 8:2, and 7:3). Single node explants (10 mm) of three cultivars ('Matnami', 'Shincheonmi', and 'Yeonhwangmi') were cultured on Murashige and Skoog medium supplemented with $0.2mg{\cdot}L^{-1}$ 6-benzyladenine for 4 weeks. Explants were exposed to $150{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ photosynthetic photon flux at a distance of 20 cm, constant temperature of $25^{\circ}C$, and under 16/8-h (day/night) photoperiod. Using the same method, the in vitro growth of 10 cultivars under red LED was also compared. After 3 weeks, vine length was highest in plantlets cultured under red LED, and lowest in plantlets cultured under blue LED. Fresh and dry weights were also greatest in plantlets cultured under red LED. Compared to the control, vine thickness was significantly higher in plantlets grown under white LED and the 7:3 R:B LED mixture. Significant differences were observed among the 10 cultivars grown under red LED. 'Matnami', 'Shincheonmi', and 'Shinhwangmi' all had excellent vine lengths, and fresh and dry weights. Compared to the control, vine elongation of sweet potato plantlets was most effective under red LED, and culture duration was about 1 week shorter.