• 제목/요약/키워드: $\alpha-quartz$

검색결과 71건 처리시간 0.028초

석영기판에 증착된 질화탄소막의 유전특성 (Dielectric Characteristics of Carbon Nitride Films on Quartz Substrate)

  • 하세근;이지공;이성필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.872-875
    • /
    • 2003
  • Carbon nitride($CN_x$) thin films were deposited on quartz substrates using reactive RF magnetron sputtering system at uarious deposition conditions and investigated dielectric characteristics. Samples for capacitance measurements were of the MIM(Metal-Insulator-Metal) type devices. Aluminum film electrodes were prepared by a vacuum thermal evaporation method before and after the deposition of carbon nitride films. Capacitances were measured by a FLUKE PM6306 RCL Meter at room temperature. Current-voltage(I-V) characteristics and resistivity were measured by a CATS CA-EDA semiconductor test and analyzer. The carbon nitride films showed ${\alpha}-C_3N_4$ and ${\beta}-C_3N_4$ etc. peaks through Raman and FTIR. Observed surface of film and side structure using SEM(Scanning Electron Microscope), and measured thickness of film by ${\alpha}-step$. We can find that the dielectric constant was the lowest value in 50% nitrogen ratio and the resistivity was the highest value in 70% nitrogen ratio.

  • PDF

Image Cut Raman Microscope을 사용한 계룡산 철화 분청사기 연구 (Image Cut Raman Microscope Study of the Geryong Mountain Chulwha Buncheong Ware)

  • 임성호;김영범;이병하
    • 한국세라믹학회지
    • /
    • 제47권4호
    • /
    • pp.312-318
    • /
    • 2010
  • Chulwha pieces collected from Hakbong-ri site in Keryong mountain were studied whether there is reactions or not in each layer to investigate firing condition of glaze, body, Chulwha, engobe of Buncheong ware in the early Chosun Dynasty, 15th~16th Century. As a result of XRD analysis of a Chulwha piece, a main crystal phase was $\alpha$-Quartz and a second was Mullite. It was assumed the firing temperature would be around $1200^{\circ}C$ because a little amount of Mullite was formed in the body and there was no phase transition $\alpha$-Quartz to cristobalite. As a result of ICRM analysis, Chulwha and glaze didn't react and the melted glazes were sunk into the Chunwha particles. The thin layer of glaze was found on the Chulwha layer. As a result, the color of Chulwha layer always came to vivid black. Moreover, Chulwha painting didn't spread over the Buncheong ware, because Chulwha and engobe didn't react. The boundary interface of engobe and body was not clear because they had similar compositions. This shows engobe was composed of more $Al_2O_3$ than body.

포항 법광사지 출토 녹유전의 자연 과학적 조사 (The Scientific Analysis of Floor Tile Excavated from the Beobgwangsa Temple Site in the Pohang)

  • 문환석;한민수;황진주;김호상
    • 고문화
    • /
    • 60호
    • /
    • pp.101-120
    • /
    • 2002
  • 고대건축에 있어 중요부재로 사용되었던 전돌은 의장이 화려하고 섬세하여 통일신라시대에는 당${\cdot}$일본의 수준을 훨씬 능가하였다. 이 중 녹유전은 그 사용례가 특별한 건축물에 한정하여 사용하였으며 남겨진 자료 또한 소량일 뿐만 아니라, 현재까계 녹유전과 관련된 연구는 거의 이루어지지 않고 있어 분석을 시도하여 보았다. 조사된 녹유전은 통일신라시대의 가장 대표적인 포항 법광사지 출토 녹유전이다. 녹유전의 성분분석은 미소부X선회절분석기, 유도결합플라르마발광분석기, 미소부형광X선분석기, 열중량/시차별분석기/열이온화질량분석기의 방법으로 이루어졌다. 현미경관찰 결과, 단면구조는 대부분이 석영, 장석이며 주변에서 쉽게 관찰할 수 있는 보통의 점토입자로 구성되어 있었다. 태토의 성분 분석예는 거의 없음으로 기존에 조사 발표된 경주 및 장도 출토 토기와 비교하여 시 Al2O3와 Fe2O3가 조금 낮고 SiO2 성분이 더 높게 분석되었다. 또한 녹유의 성분분석 결과, PbO $70.2wt\%$를 함유한 순수한 납 유리질이었다. 전돌의 소성온도는 TG/DTA를 통해 $573^{\circ}C$에서의 흡열피크$(\alpha-quartz\rightarrow\beta-quartz)$$870^{\circ}C$에서 석영의 상전이$(\beta-quartz{\rightarrow}tridymite)$에 따른 발열피크가 관찰되었다. 이는 $900^{\circ}C$ 이전에는 특이한 열적 변화가 없고 이 온도 범위 이상에서 변화가 일어났다는 것을 의미하므로 $900^{\circ}C$ 이하에서 소성된 것이라 사료된다. XRD를 이용한 광물분석에서는 전형적인 점토광물인 quartz와 feldspar, muscovite peak가 동정되고, 고온 소성시 보여지는 tridymite, mullite와 cristobalite peak가 동정되지 않은 것으로 석영의 결정구조 변화에 따른 소성온도 추정으로 보아 $900^{\circ}C$ 이하의 저온소성으로 볼 수 있다. 전돌 녹유의 납동위원소비 분석결과는 한국중남-남부광산연과 일치하고 있으며, 따라서 포항 법광사지의 녹유전돌의 제작산지는 한반도 남부의 원료를 사용하여 제작했음을 추정할 수 있다.

  • PDF

Comparison of light transmittance in different thicknesses of zirconia under various light curing units

  • Cekic-Nagas, Isil;Egilmez, Ferhan;Ergun, Gulfem
    • The Journal of Advanced Prosthodontics
    • /
    • 제4권2호
    • /
    • pp.93-96
    • /
    • 2012
  • PURPOSE. The objective of this study was to compare the light transmittance of zirconia in different thicknesses using various light curing units. MATERIALS AND METHODS. A total of 21 disc-shaped zirconia specimens (5 mm in diameter) in different thicknesses (0.3, 0.5 and 0.8 mm) were prepared. The light transmittance of the specimens under three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) was compared by using a hand-held radiometer. Statistical significance was determined using two-way ANOVA (${\alpha}$=.05). RESULTS. ANOVA revealed that thickness of zirconia and light curing unit had significant effects on light transmittance ($P$ <.001). CONCLUSION. Greater thickness of zirconia results in lower light transmittance. Light-emitting diodes light-curing units might be considered as effective as Plasma arc light-curing units or more effective than Quartz-tungsten-halogen light-curing units for polymerization of the resin-based materials.

유기용매의 사용없이 알콕사이드로부터 코디어라이트 분말제조 (Cordierite Powder Preparation from Alkoxides without Using Organic Solvents)

  • 류수착;김호룡;김겸;박희찬
    • 한국세라믹학회지
    • /
    • 제31권3호
    • /
    • pp.291-297
    • /
    • 1994
  • Cordierite powders were prepared by controlled hydrolysis of metal alkoxides with catalysts in water medium without using organic solvents. Water was adjusted to a certain pH by HC1 and NH4OH. $\alpha$-Cordierite powder was prepared from aluminum isopropoxide, tetraethyl orthosilicate and magnesium ethoxide mixed with water adjusted to pH of 3. At water pH of 11, $\alpha$-cordierite, mullite and $\beta$-quartz phases were coexisted. The powders were freeze dried, calcined and then fired at different temperatures. The characteristics of powders were examined by means of DTA, X-ray diffraction, FT-IR, and electron microscopy. It was found that $\alpha$-cordierite could be synthesized at temperature of 120$0^{\circ}C$ from the powders prepared by alkoxides with water medium without organic solvents.

  • PDF

저결함 압전수정의 성장과 결함분석 (Growth of Low Defect Piezo-quartz and Defect Analysis)

  • 이영국;박로학
    • 한국결정학회지
    • /
    • 제8권1호
    • /
    • pp.26-32
    • /
    • 1997
  • 수열법을 이용하여 압전수정을 성장하고 각종 성장결함을 분석하였다. 4 중량퍼센트 NaOH, 성장온도 $340-360^{\circ}C$, 온도구배 $20-40^{\circ}C$의 성장조건에서 (0001)방향의 ZY 종자결정, 합성수정을 원료로 하였을 경우 성장속도는 0.25-0.65 mm/day 였다. 원료로써 합성수정을 사용하고 저전위 종자결정 위에서 수평 종자결정 배치법으로 성장된 압전수정의 전위밀도는 20.0개/$cm^2$, 에치채널 밀도는 5.0개/$cm^2,\;10\mu$ 이상의 함유물 농도는 2.4개/$cm^3$, 알파값은 0.019였으며, IEC 758규격에 의한 등급분류는 에치채널 밀도 1등급, 함유물 농도 Ia등급, 알파값 A등급이었다.

  • PDF

맥반석처리가 골프장 잔디의 생육과 토양미생물의 군집구조에 미치는 영향 (Effect of Quartz Porphyry on Growth of Creeping Bentgrass (Agrostis stolonifera) and Soil Bacterial Community Structures)

  • 고성철;최정혜;김병혁;김상은
    • 미생물학회지
    • /
    • 제44권4호
    • /
    • pp.317-325
    • /
    • 2008
  • 최근의 골프 수요의 증가는 골프장의 일일 내장객 수의 증가로 이어져 골프장 관리에 어려움을 겪고 있다. 이의 친환경적 관리방안의 하나로 자연계에 존재하는 광물을 활용하여 토양의 물리, 화학성을 개선 할 수 있는 친환경적 토양개량제 개발 필요성이 제기되고 있다. 이들 광물 중 맥반석은 토양개선을 통한 일반농작물의 생육촉진과 증수에 기여함이 밝혀지고 있는 바, 본 연구에서는 이 광물을 골프장 토양관리에 적용시 야기되는 토양의 물리.화학적 변화로 인한 잔디의 생육영향과 토양미생물 군집변화특성에 관한 기초자료를 얻고자 수행하였다. 골프장 퍼팅그린 잔디(bentgrass)를 이식한 pot 실험결과 대체적으로 맥반석 20% 처리구가 잔디 잎의 웃자람을 억제하며 생육촉진을 유도하고 뿌리의 생육도 촉진하는 것으로 밝혀졌다. 또한 PCR-DGGE 분석결과 이 처리구에서 가장 높은 종풍부도를 나타내었으며 Actinobacteria와 ${\alpha}$-Proteobacteria가 우점하는 것으로 나타났다. 이는 맥반석처리 시 낮은 용탈 유기물 함량과 가용성 양이온($Ca^{2+}$, $Mg^{2+}$$K^+$ 등)의 용탈 감소와 관련 있는 것으로 사료되었다.

산소 K-전자껍질 에너지-손실 흡수끝-부근 구조 양자계산을 이용한 $SiO_2$ 동질이상 광물의 전자구조 연구 (Local Electronic Structures of $SiO_2$ Polymorph Crystals: Insights from O K-edge Energy-Loss Near-Edge Spectroscopy)

  • 이유수;이성근
    • 한국광물학회지
    • /
    • 제23권4호
    • /
    • pp.403-411
    • /
    • 2010
  • 지구물질의 거시적 성질로부터 지구시스템 진화의 실마리를 찾을 수 있으며, 이런 거시적인 물성은 지구물질의 원자구조에 의하여 결정되기 때문에 지구물질의 원자구조(즉, 전자구조)를 파악하는 것은 지구시스템의 현상의 이해에 매우 중요하다. 지구내부의 잘 알려지지 않은 물질들의 원자구조를 규명하기 위하여 최근에는 범밀도함수 이론에 기반한 양자계산이 이용되고 있다. 본 연구에서는 온-포텐셜 선형화 보충 평면파가 이용된 양자계산을 통해 저온석영과 스티쇼바이트에 대한 산소원자 K-전자껍질 에너지-손실 흡수끝-부근 구조(energy-loss near-edge structure; ELNES) 스펙트럼과 각 전자 오비탈에 대한 국소상태밀도(partial local density of states; PLDOS)를 계산하였다. 산소원자 K-전자껍질 ELNES 스펙트럼은 저온석영과 스티쇼바이트의 결정구조에 따라서, 저온석영에서는 ~538 eV에서 세기가 강한 피크가 나타나고 스티쇼바이트에서는 ~537과 ~543 eV에 강한 피크가 나타난다. 이와 같은 결정구조에 따른 산소원자 K-전자껍질 ELNES 스펙트럼의 차이는 지구내부 다양한 결정질과 비결정질 규산염 물질의 산소원자 주변의 환경을 파악하는 중요한 지표로 이용될 수 있다.

입자파쇄 특성에 따른 Sabkha층의 이차압축 특성 (Secondary Compression Characteristics Caused by Particles Crushing of Sabkha Soil)

  • 김석주;배경태;이장덕;한희수
    • 한국지반공학회논문집
    • /
    • 제29권11호
    • /
    • pp.61-72
    • /
    • 2013
  • Sabkha층 탄산질 모래의 입자파쇄발생시 이차압축특성을 파악하기 위하여 압밀시험을 수행하여 입자파쇄응력을 파악하였다. 입자파쇄 항복응력에서 순간적으로 발생한 입자파쇄 압축침하를 해석하기 위하여 이차압축률 대신 이차 파쇄압축률 $C_{{\alpha}{\epsilon}}{^*}$를 도입하였다. 입자파쇄 발생시의 간극비 $e_p{^*}$와 침하량 $H_p{^*}$가 이차압축거동의 기준점으로 사용되었다. 일차압축지수와 이차파쇄압축률을 비교한 결과 현장 Sabkha층의 경우 $C_{{\alpha}{\epsilon}}{^*}/C_c$ 값이 0.0105~0.0187로 나타났으며 일반적인 석영질 사질토에 비해 입자파쇄 발생으로 인한 이차압축거동이 매우 크게 나타났다. 동일한 재하응력에서는 Sabkha층의 심도가 깊을수록 입자파쇄침하량과 이차파쇄압축률이 증가함을 확인할 수 있었다.

천안 운전리 청동기 유적지에서 출토된 무문토기의 정량분석, 산지 및 소성조건 (Firing Condition, Source Area and Quantitative Analysis of Plain Coarse Pottery from the Unjeonri Bronze Age Relic Site, Cheonan, Korea)

  • 최석원;이찬희;오규진;이효민;이명성
    • 헤리티지:역사와 과학
    • /
    • 제36권
    • /
    • pp.267-297
    • /
    • 2003
  • The plain coarse pottery from the Unjeonri Bronze Age relic sites in the Cheonan, Korea were studied on the basis of clay mineralogy, geochemistry and archaegeological interpretations. For the research, the potteries are utilized at the analysis for 6 pieces of plain coarse potteries. Color of the these potteries are mainly light brown, partly shows the yellowish brown to reddish brown. The interior, surface and inside of the pottery appear as different colors in any cases. Original source materials making the Unjeonri potteries are used of mainly sandy clay soil with extreme coarse grained irregularly quartz and feldspar. The magnetic susceptibility of the Unjeonri pottery range from 0.20 to 1.20. And the Unjeonri soil's magnetic susceptibility agree almost with 0.20 to 1.30. In the same magnetization of soil and pottery, the results revealed that the Unjeonri soil and low material of pottery are same produced by identical source materials. The Unjeonri potteries and soil are very similar patterns with all characteristics of soil mineralogy, geochemical evolution trend. The result seems to be same relationships between the behavior and enrichment patterns on the basis of a compatible and a incompatible elements. Consequently, the Unjeonri potteries suggest that made the soil to be distributed in the circumstance of the relic sites as the raw material are high in a greater part. In the Unjeonri soil, the kaolinite is common occurred minerals. However, in the Unjeonri pottery, the kaolinite was not detected in all broken pieces. The kaolinite was presumed to destroy crystal structure during the firing processes of over $550^{\circ}C$. The quartz is phase transition from ${\alpha}$-quartz to ${\beta}$-quartz at $573^{\circ}C$, but the Unjeonri pottery did not investigated any phase transition evidences of quartz. The chorite was detected within the mostly potteries and soils. As the results, the Unjeonri potteries can be interpreted by not experiencing a firing temperature over $800^{\circ}C$. The colloidal and cementing materials between the quartz and low materials during the heating did not exist in the internal part of the potteries. An any secondary compounds by heating does not appear within the crack to happen during the dry of the pottery. The hyphae group are kept as it is with the root tissue of an organic matters to live in the swampy land. In the syntheses of all results, the general firing condition to bake and make the Unjeonri pottery is presumed from $550^{\circ}C$ to $800^{\circ}C$. However, the firing condition making the Unjeonri pottery can be different firing temperature partially in one pottery. Even, the some part of the pottery does not take a direct influence on the fire.