• 제목/요약/키워드: $\alpha$-quartz

검색결과 71건 처리시간 0.017초

고압력하에서의 $\alpha-quartz$$\alpha-quartz$$GeO_2$의 상전이에 관한 분자동력학시뮬레이션 (Molecular Dynamic Simulations of the Phase Transition of $\alpha-quartz$ and $\alpha-quartz-type$-type $GeO_2$ under High Pressure)

  • 김대원;노광수;최희락;성태현
    • 한국세라믹학회지
    • /
    • 제34권7호
    • /
    • pp.713-721
    • /
    • 1997
  • Molecular dynamic (MD) simulations with new interatomic potential function including the covalent bond were performed on the phase transition of $\alpha$-quartz-type GeO2 under high pressure. The optimized crystal structure and the pressure dependence of the lattice constant showed higher reproducibility than the previous models and were in very good agreement with the experimental data. A phase transition of $\alpha$-quartz and $\alpha$-quartz-type GeO2 by simulation was found approximately 24 GPa and 6-7 GPa, respectively. This phase transition involved an abrupt volume shrinkage and showed 4-6 coordination mixed structure with the increasing in the coordination number of cation.

  • PDF

분자동력 학 시뮬레이션과 일축압축강도시험을 이용한 $\alpha$-quartz의 결정축에 따른 강도이방성 검토 (A study on anisotropic characteristics of axial strengths in $\alpha$-quartz by using molecular dynamics simulation and uniaxial compression test)

  • 서용석;이진국;;;정교철;김교원
    • 터널과지하공간
    • /
    • 제10권1호
    • /
    • pp.70-79
    • /
    • 2000
  • 입자수, 압력, 온도일정의 앙상블(NPT-ensemble) 분자동력학(MD) 시뮬레이션을 이용하여 300$^{\circ}$K에서 $\alpha$-quartz의 결정축에 따른 일축압축강도를 계산하고, 자연산 $\alpha$-quartz 단결정 코아를 제작하여 일축압축강도시험을 실시하였다. $\alpha$-quartz 단결정 코아에 대한 일축압축시험에서 측정된 결과에 의하면 재하 방향이 c축에 평행한 경우가 수직인 경우보다 높은 강도를 나타내지만, MD 시뮬레이션에서 계산된 완전무결함 $\alpha$-quartz의 경우 이와 반대의 결과를 보이고 있다. 두 경우 모두 재하방향에 따른 강도 이방성을 보이고 있으나, 그 이유는 서로 다르다. MD 시뮬레이션에 의해 계산된 무결함 $\alpha$-quartz의 강도 이방성은 결정구조의 차이에 기인하는 것으로 사료된다. 이에 반해 일축압축시험을 통해 측정된 $\alpha$-quartz의 강도 이방성은 결정성장과정에서 생기는 주상 미세결함에 의해 영향을 받는다.

  • PDF

푸리에 변환 적외선 분광기에 의한 사망한 탄광부 진폐증자의 폐조직내 석영농도 (The analysis of α-quartz in the worker's lung died of coal workers' pneumoconiosis by FT-IR)

  • 김해정;최호춘;정호근
    • 한국산업보건학회지
    • /
    • 제1권2호
    • /
    • pp.238-245
    • /
    • 1991
  • This study was analysis of ${\alpha}$-quartz in the 37 worker's lung died of coal workers' pneumoconiosis(CWP) and in the 9 normal's lung by Fourier transform infrared spectrophotometer. The results were as follows : 1. The dried lung weight percents in wet lung weight were 24.4%, 25.4%, coal workers' pneumoconiosis and normal lungs, respectively. Ash weight percents in dried lung weight were 7.7%, 5.0%, coal workers' pneumoconiosis and normal lungs, respectively. 2. The presision (as of coefficient of variation) for the ${\alpha}$-quartz determination were 2.6% in standard quartz (ranged from 9.9 to $198.0{\mu}g$) and 3.7% in ashed lung samples. 3. The characterstic ${\alpha}$-quartz absorption spectra in lungs of CWP were only shawn by LTA ashing. 4. Geometric mean of ${\alpha}$-quartz concentration in CWP lung was 173mg/100g dried lung. 5. The concentrations of ${\alpha}$-quartz in Korean CWP lungs were similar to those of foreign coal miner's lungs.

  • PDF

자기소지에서 Quartz의 Cristobalite화에 미치는 알칼리 금속산화물의 영향 (Effects of Alkali Oxides on the Cristobalitization of Quartz in Whiteware Body)

  • 정창주;김남일;오경영
    • 한국세라믹학회지
    • /
    • 제29권12호
    • /
    • pp.981-989
    • /
    • 1992
  • This is a study on the effects of cristobalite transition of quartz in semi-vitrious whiteware body, as addition of alkali and alkali earth oxides, prepared by pottery stone, feldspar, kaolin and clay minerals. The amounts of ${\alpha}$-quartz to ${\alpha}$-cristobalite transition, F.O.C. (fraction of cristobalite), were increased with firing temperature. In MgO added body, ${\alpha}$-quartz was decreased and the formation of cristobalite was increased. Effects of K2O addition was remarkably decreased the formation of cristobalite. Additive effects of MgO and K2O were confirmed that it was very different to variation of transition temperature of metakaolinite to Si-Al spinel structure in thermal reaction of kaolinite minerals. Result CaO addition was ineffective to transition temperature, and the transition temperature in Na2O added body was decreased, but relative intensity of quartz and cristobalite crystal in XRD results was decreased. This was characterized by the effects on the formation of liquid phase much more.

  • PDF

제천규석으로부터 SiC 및 $SiC-Si_3N_4$계 분말 합성 (Syntheses of SiC and $SiC-Si_3N_4$ Powder from Jecheon Quartz)

  • 이홍림;배철훈;문준화
    • 한국세라믹학회지
    • /
    • 제23권1호
    • /
    • pp.67-73
    • /
    • 1986
  • SiC and $SiC-Si_3N_4$ powder were synthesized via the carbiding and carbiding-nitriding reaction of Jecheon quartz respectively using graphite as a reducing agent. $\beta$-SiC+($\alpha$+$\beta$)-$Si_3N_4$ composite was obtained by the carbiding-nitriding reaction of Jecheon quartz-graphite mixture at 1, 35$0^{\circ}C$ in $H_2$ atmosphere. $\beta$-SiC+($\alpha$+$\beta$)-$Si_3N_4$ composite was obtained by the carbidint-nitriding reaction of Jecheon quartz-graphite mixture at 1, 35$0^{\circ}C$ in $N_2-H_2$ atmosphere. The ratio of $\beta$-SiC+($\alpha$+$\beta$)-$Si_3N_4$ content in a produced composite could be controlled by adjusting the reaction time and gaseous mixture.

  • PDF

A Study of the Thermoluminescent Properties of Korean Natural Quartz for Possible Use in Gamma-ray Dosimetry

  • Lee, Hee-Yong;Kim, Hi-Gyu;Lee, Chul
    • Nuclear Engineering and Technology
    • /
    • 제2권4호
    • /
    • pp.229-239
    • /
    • 1970
  • 국내산 천연수정의 열형광발생의 성질을 이용해서 ${\gamma}$선의 선량을 측정할 수 있는 가능한 여러가지 방법을 연구하였다. 가열방법이 정확히 선형적일때는 ${\gamma}$선에 조사된 방사선에 민감한 $\alpha$수정은 단일첨두의 열형광 발생곡선을 나타낼 수 있는고로 이 발생곡선의 첨두의 높이는 $\alpha$수정에 의해서 ${\gamma}$선의 선량을 측정하는 방법에 있어서 ${\gamma}$선의 선량을 나타낸다고 볼 수 있다. 이 수정선량계는 2$\times$$10^3$R에서 2$\times$$10^{6}$R까지의 선량범위내에서 열형광강도의 직선성을 나타내었으며, 또한 발생곡선의 첨두때의 온도(300$\pm$4$0^{\circ}C$)가 높은 고로 열형광의 상온에서의 자연상태가 적다는 장점이 있다. 입자의 크기가 0.3<ø<0.9mm인 분말수정은 50R에서 2$\times$$10^3$R까지의 ${\gamma}$선의 선량범위내에서 열형광강도의 직선성을 나타내었다. 암환자의 신체일부에 조사된 ${\gamma}$선의 급수선량을 정확히 측정해야하는 방사선치료상의 적용에 분말수정시료를 사용해본 시도는 좋은 결과였다고 생각된다.

  • PDF

A New Concept for Efficient Sensitivity Amplification of a QCM Based Immunosensor for TNF-α by Using Modified Magnetic Particles under Applied Magnetic Field

  • Bahk, Yeon-Kyoung;Kim, Hyung-Hoon;Park, Deog-Su;Chang, Seung-Cheol;Go, Jeung-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권12호
    • /
    • pp.4215-4220
    • /
    • 2011
  • This study introduces a new concept for a simple, efficient and cheap sensitivity amplification of a Quartz Crystal Microbalance (QCM) based immunosensor system for the detection of tumor necrosis factor-alpha (TNF-${\alpha}$, TNF) by using an in-built magnetic system. The frequency shift due to the applied magnetic field was successfully observed on magnetic particles labeled detection antibodies, anti-human TNF-${\alpha}$, which were bound to the immunologically captured TNF-${\alpha}$ on the gold coated quartz crystals. In the present system, the magnitude of frequency shift depends on both the strength of magnetic field and the amount of target antigen applied. Significant signal amplification was observed when the additional built-in residual stress generated by the modified magnetic particles under the magnetic field applied. Used in conjunction with a sandwich type non-competitive immunoassay format, the lower detection limit was calculated to be 25 $ngmL^{-1}$ and showed good linearity up to TNF-${\alpha}$ concentrations as high as 2.0 ${\mu}gmL^{-1}$. The sensitivity, most importantly, was improved up to 4.3 times compared with the same QCM system which was used only an antigen-antibody binding without additional magnetic amplification.

고상반응식을 이용한 석회-석영의 수열반응속도와 반응메카니즘 (Hydrothermal Kinetics and Mechanisms of Lime and Quartz Used Solid State Reaction Equations)

  • 임굉
    • 공학논문집
    • /
    • 제3권1호
    • /
    • pp.223-233
    • /
    • 1998
  • 고상반응식을 이용한 석회와 석영과의 수열반응속도 및 반응메카니즘에 관하여 연구하였다. 출발물질로 석영과 수산화칼슘 CaO/$SiO_2$몰비 0.8-1.0로 혼합하고 $180-200^{\circ}C$, 0.5-8시간동안 포화증기압하에서 오토클레이브로 수열반응을 행하였다. 수열반응속도는 총 석회의 양과 총 석영의 양에 대한 미반응 석회의 양과 미반응 석영의 양의 비로 구하였다. 반응속도는 Jander의 식 $[1-(1-\alpha)^{1/3}]^N=Kt$를 이용하여 얻은 결과, 석회의 반응속도는 N=1로서 주로 용해속도에 의해 지배되고 석영의 반응속도는 $N\risingdotseq2$로서 확산에 의해 주로 지배된다. 규산칼슘수화물계의 수열반응속도는 반응물 입자주위에 형성된 생성물층을 통한 물질전달에 의해 율속되는 것으로 추정되고 전체 수열반응의 속도식은 대략 $N=1-2$로서 경계층으로부터 확산에 의해 율속과정으로 전환된다.

  • PDF

Subtraction 방법을 이용한 TL 연대측정법에 의한 토기 시편의 절대연대 결정 (Thermoluminescence Dating of Pottery Shards by Subtraction Method)

  • 신현상;이창우;남영미;지광용;박병빈
    • 분석과학
    • /
    • 제13권4호
    • /
    • pp.403-411
    • /
    • 2000
  • TL 측정과 subtraction 방법을 이용한 고고 도자기 시편의 절대연대 측정방법을 확립하였다. 본 연구에서는 백제시대 토기 시편을 사용하였으며, TL측정을 위한 시료는 미세낟알법과 석영분리법을 이용하여 준비하였다. 미세낟알법에서는 분쇄한 시편 분말 중 아세톤 용액에서의 침강속도에 따른 분리를 통하여 $5-10{\mu}m$ 크기의 미세 낟알을 TL측정에 사용하였다. 석영분리법에서는 분쇄한 시편 분말을 HF처리후 90-125{\mu}m$ 크기의 석영 결정을 분리하여 사용하였다. 각 시료에 감마선원($^{137}Cs$) 또는 알파선원($^{241}Am$)을 인위적으로 조사하여 자연 TL량에 고고학적 선량을 평가하였고, subtraction 방법을 통하여 알파선원 만의 영향으로 시편에 축적된 고고학적 선량을 계산하였다. 그 결과 백제시대 토기 시편에 대하여 얻어진 선량은 4.60Gy이었다. 시편에 함유된 알파 방출 방사능 물질(U,Th)의 농도 분석 값으로부터 토기 시편에 대한 매년마다의 선량률($3.05{\pm}0.11$ mGy/yr.)을 결정하였다. 얻어진 선량률로 시편의 고고학적 선량을 나누어줌으로써 결정된 토기 시편의 절대연대는 $1508{\pm}80$년(A.D. ca. 492 yr.)이었으며, 편년연대법에 의한 추정 연대 (5세기 중반)와 10% 오차 범위 내에서 일치하였다.

  • PDF

De-soda Process Using Silica for Fabrication of Low Soda Alumina Powder

  • Park, Sang-Chun;Kim, Dae-Woong;Heo, In-Woong;Lee, Sang-Jin
    • 한국세라믹학회지
    • /
    • 제52권3호
    • /
    • pp.192-196
    • /
    • 2015
  • Low soda alumina powder was fabricated using silica (${\alpha}$-quartz) as an agent for removing soda components in the alumina. Quartz powder 2 mm in size was added to aluminum hydroxide obtained through the Bayer process, and then the mixture was heated at various temperatures. Finally, the heat-treated powders were sieved for classification. In this study, the effects of the quartz amount and heating temperature on the mechanism of removing soda were examined. A minimum soda content of 0.005 wt% was observed at the conditions of 15 wt% quartz (based on $Al(OH)_3$ amount) heat-treated at $1600^{\circ}C$ for 8 h. The soda components, such as $Na_2O$, NaOH, and $Na_2CO_3$, in alumina were ionized and activated at high temperature, and this facilitated the reaction with quartz silica and alumina producing nepheline. The advantages of using quartz include low iron content and low cost in comparison with the conventional de-soda process using chamotte, another silicate mineral.