• 한국자기학회지
• /
• 제1권1호
• /
• pp.12-16
• /
• 1991

F $e_{76-x}$ C $u_{1}$M $o_{x}$S $i_{14}$ $B_{9}$(x=2, 3)비정질합금의 열처리에 따른 자기적특성과 미세구조의 변화에 대해 조사하였다. 이들합금을 500 .deg. C에서 1시간 열처리한 경우, 결정화에 의해 약 20mm의 입경을 갖는 .alpha. -Fe의 초미세결정립 조직으로 변태하였으며, 이때 얻어진 합금의 실효투자율은 8~9*$10^{3}$, 보자력은 3~4A/m정도이었다. 초미세결정합금의 연자기특성을 크게 좌우하는 요소중의 하나가 입경의 크기이며, 우수 한 자성특성을 얻기위해서는 결정립의 미세화가 요구되는 것으로 알려져 있다. 이에 따라 Fe-Cu-Mo-Si-B계 합금의 경우보다 우수한 연자기특성을 얻기 위하여 2단 열처리를 행하였다. 즉, 400 .deg. C에서 1~3시간 저온 열처리 후 500 .deg. C에서 1시간 고온열처리를 하면 입경이 10nm이하로 감소하였으며, 이때 얻어진 합금의 실효투자율은 1.2~ 1.7*$10^{4}$이고 보자력은 ~2A/m이었다. 이와 같은 연자기특성의 향상은 .alpha. -Fe(Si)결정립의 미세화에 따른 평균결정자기이방성 의 감소에 기인하는 것으로 믿어진다.

• 한국세라믹학회지
• /
• 제22권1호
• /
• pp.53-59
• /
• 1985

Experiments related to nitriding silicon with addition of $Si_3N_4$ have provided information on the effects of such inclusion on the phase relationships of Reaction Bonded Silicon Nitride. In the current work specimens containing 0-25wt% Si3N4 which have 55.5wt% $\alpha$ 4.5wt% $eta$, 40wt% amorphous phase were nitrided for 7-20 hours at 1300-135$0^{\circ}C$ The evaluation of nitridation was per-formed by means of $\alpha$-and $\beta$-phase contents determination in nitrided specimens, In order to observe nitrided region between silicon and silicon nitride scanning electron microscopy was used to study reacted region between silicon and silicon nitride particle. For this purpose semiconductor-grade silicon wafer single crystal was used as a silicon source. The incorporation of small amount of $Si_3N_4$ powder is contributed to enhancing the rate of formation of $\alpha$-phase.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.247-252
• /
• 2015

${\alpha}$-상 과 ${\beta}$-상 두 가지 종류의 탄화규소(SiC) 입자 표면에 수열 합성 방법으로 ZSM-5 결정을 형성하였다. SiC는 $50{\mu}m$ 이상이 되는 크기의 입자를 사용하였으며, ZSM-5 결정이 SiC 표면에서부터 성장하도록 유도하기 위하여 합성 단계에 앞서 SiC 표면에 산화층을 형성하였으며, 수열합성 온도와 시간을 변화시켜 보았다. 그 결과 ${\beta}$-SiC는 $900^{\circ}C$ 조건에서도 산화막이 형성되었으며, 특히 $150^{\circ}C$ 합성 조건에서 ZSM-5가 ${\beta}$-SiC 표면에서부터 성장하였음이 뚜렷이 관찰되었다. $200^{\circ}C$ 조건에서는 ZSM-5의 결정의 크기가 성장할 뿐 아니라, 시간의 증가에 따라 결정의 형태가 뚜렷해지고 SiC 표면에 도포되는 양이 증가하는 것을 확인할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.5-7
• /
• 1988

Effect of isothermal aging on the crystallization of $Fe_{78}B_{13}Si_{9}$ metallic glass has been investigated by electrical resistivity, X-ray measurements, bending test, thermal analysis and transmission electron microscopy. Amorphous $Fe_{78}B_{13}Si_{9}$ alloy was annealed isothermally for 5 to 1200 mon. between 300 C and 540 C. It has been found that close relation between relative resistivity and X-ray diffraction pattern showed. The crystalline peak of $\alpha$-(Fe, Si) and Fe$_2$B are detected by X-ray experiment. The crystalline phases observed by TEM show $\alpha$-(Fe, Si) and Fe$_3$B with dendritic and cylindrical morphology, respectively. It has been also found that the embrittleness of aged samples rapidly increased with the crystallization and was shown before the crystallization.th the crystallization and was shown before the crystallization.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1283-1292
• /
• 1994

Ultra-fine $\beta$-SiC powders were fabricated by self-propagating high temperature synthesis process (SHS) using chemical furnace. The dependences of the C powders with different surface areas, the molar ratios of C/Si, the weight ratios of chemical fuel content, and pellet diameter-size on synthesis were investigated. Compositional and structural characterization of these powders was carried out by scanning electron micrograph and X-ray diffraction. The $\beta$-SiC powders which had C/Si mole ratio=1.05, 3 times chemical fuel contents, and pellet diameter=20 mm were optimum for synthesis efficiency. By optimizing process-variables, it is possible to fabricate $\beta$-SiC powders which have little secondary phases ($\alpha$-SiC).

• Toxicological Research
• /
• 제32권3호
• /
• pp.225-230
• /
• 2016

Zingiber officinale Roscoe has been widely used as a folk medicine to treat various diseases, including cancer. This study aims to re-examine the therapeutic potential of co-administration of natural products and cancer chemotherapeutics. Candidate material for this project, ${\alpha}$-zingiberene, was extracted from Zingiber officinale Roscoe, and ${\alpha}$-zingiberene makes up $35.02{\pm}0.30%$ of its total essential oil. ${\alpha}$-Zingiberene showed low $IC_{50}$ values, $60.6{\pm}3.6$, $46.2{\pm}0.6$, $172.0{\pm}6.6$, $80.3{\pm}6.6$ (${\mu}g/mL$) in HeLa, SiHa, MCF-7 and HL-60 cells each. These values are a little bit higher than $IC_{50}$ values of general essential oil in those cells. The treatment of ${\alpha}$-zingiberene produced nucleosomal DNA fragmentation in SiHa cells, and the percentage of sub-diploid cells increased in a concentration-dependent manner in SiHa cells, hallmark features of apoptosis. Mitochondrial cytochrome c activation and an in vitro caspase-3 activity assay demonstrated that the activation of caspases accompanies the apoptotic effect of ${\alpha}$-zingiberene, which mediates cell death. These results suggest that the apoptotic effect of ${\alpha}$-zingiberene on SiHa cells may converge caspase-3 activation through the release of mitochondrial cytochrome c into cytoplasm. It is considered that anti-proliferative effect of ${\alpha}$-zingiberene is a result of apoptotic effects, and ${\alpha}$-zingiberene is worth furthermore study to develop it as cancer chemotherapeutics.

• 한국재료학회지
• /
• 제8권7호
• /
• pp.584-590
• /
• 1998

$(Fe_{0.98}Mn_{0.02})_xSi_2(x{\leq$}1) 조성으로, 용융법으로 제조한 $\alpha$-$Fe_2Si_5$상의 잉곳을 730~85$0^{\circ}C$에서 4~20시간 열처리하거나, 기계적 합금화로 제조한 $\varepsilon$-FeSi과 Si상으로 구성된 분말을 760~85$0^{\circ}C$에서 10분간 가압통전소결하므로써 $\beta$-$FeSi_2$기지상에 Si이 분산된 미세조직을 얻을 수 있었다. 조성, 열처리 온도와 소결 온도에 따라 Si 분상의 크기와 간격이 각기 0.05~0.27$\mu\textrm{m}$와 0.2~0.6$\mu\textrm{m}$ 범위에서 변화하였다. 이와 같은 Si 분산상에 의해 $\beta$-$FeSi_2$의 격자 열전도도가 감소되어 성능지수가 향상될 수 있을 것으로 기대된다.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.172-179
• /
• 1998

Valve lifter namely tappet is supported by lifter hole which is located upper side of camshaft in cylinder block transforms rotatic mvement of camshaft into linear movement and helps to open and shut the en-gine valve as an engine parts. The face of valve lifter which is continuously contacting with camshaft brings about abnormal wears such as unfair wear and early wear because it is severely loaded in the valve train system. These wears act as a defect like over-clearance and cause imperfect combustion of fuel during the valve lifting in the combustion chamber. Consequently this imperfect combustion makes the engine out-put decrease and has cause on air pollution. To prevent these wears therefore The valve lifter cast in me-tal developed into SiC ceramics valve lifter which has an excellence in wear and impact resistance As a results the optimum process conditions like injection condition mixture ratio and debonding process could be established. After sintering fine-sinered dual microstructure in which prior ${\alpha}$-SiC matches well with new SiC(${\beta}$-SiC) produced by reaction among the ${\alpha}$-SiC carbon and silicon was obtained. Based on the study it is verified that mechanical properties of SiC valve lifter are excellent in Vickers hardness 1100-1200 bending strength (300-350 Pa) fracture toughness(1.5-1.7 Mpa$.$m1/2) Through engine dynamo test-ing SiC valve lifter and metal valve lifter are examined and compared into abnormal phenomena such as early fracture unfair and early wear. It is hoped that this research will serve as an important springboard for the future study of heavy duty diesel engine parts developed by ceramics which has a good wear resis-tance relaibility and lightability.

• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.552-557
• /
• 1996

소결조제로 2 wt % $Al_2O_3$와 6 wt% $Y_2O_3$를 첨가한 $Si_3N_4/20$ vol % SiC 초미립복합 재료의 고온가압소결 중의 미세구조 발현과정을 sintering interruption법으로 관찰하였다. 밀도는 $1500^{\circ}C$와 $1700^{\circ}C$ 사이에서 빠르게 증가하였으며, $1800^{\circ}C$ 에서 이론밀도에 가깝게 치밀화하였다. 질화규소의 상전이 속도는 $1700^{\circ}C$와 $1800^{\circ}C$에서 증가하였으며, 길게 자란 기지상결정립들이 나타났다. 작은 입경의 SiC는 치밀화속도와 기지상 상전이를 억제하는 효과를 보였다.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.459-465
• /
• 2014

In this study, Si-SiC composites were fabricated using a Si melt infiltration method using ${\beta}$-SiC/C composite powders synthesized by the carbothermal reduction of $SiO_2-C$ precursors made from a TEOS and a phenol resin. The purity of the synthesized SiC-C composite powders was higher than 99.9993 wt% and the average particle size varied from 4 to $6{\mu}m$ with increasing carbon contents of the $SiO_2-C$ precursors. It was found that the Si-SiC composites fabricated in this study consist of ${\beta}$-SiC and residual Si, without any trace of ${\alpha}$-SiC. The 3-point bending strengths of the fabricated Si-SiC composites were measured and found to be higher than 550 MPa, although the density of the fabricated Si-SiC composite was less than $2.9g/cm^3$. The bending strengths and the densities of the fabricated Si-SiC composites were found to decrease with increasing C/Si mole ratios in the SiC-C composite powders. The specific resistivities of the Si-SiC composites fabricated using the SiC-C composite powders were less than $0.018{\Omega}cm$. With increasing C content in the SiC-C composite powders used for the fabrication of Si-SiC composites, the specific resistivity of the Si-SiC composites was found to slightly increase from 0.0157 to $0.018{\Omega}cm$.