• Corrosion Science and Technology
• /
• v.8 no.4
• /
• pp.143-147
• /
• 2009

In biomedical implants and dental fields, titanium has been widely utilized for excellent corrosion resistance and biocompatibility. However, Ti and its alloys are nonbioactive after being implanted in bone. In this study, for the purpose of improvement in biocompatibility the anodic $TiO_2$ layer on Ti-xNb alloys were fabricated by electrochemical method in phosphate solution, and the effect of Nb content on the pore size, the morphology and crystallinity of Ti oxide layer formed by the anodic oxidation method was investigated. The Ti containing Nb up to 3 wt%, 20 wt% and 40 wt% were melted by using a vacuum furnace. The sample were cut, polished, and homogenized for 24 hr at $1050^{\circ}C$ for surface roughness test and anodizing. Titanium anodic layer was formed on the specimen surface in an electrolytic solution of 1 M phosphoric acid at constant current densities ($30mA/cm^2$) by anodizing method. Microstructural morphology, crystallinity, composition, and surface roughness of oxide layer were observed by FE-SEM, XRD, EDS, and roughness tester, respectively. The structure of alloy was changed from $\alpha$-phase to $\beta$-phase with increase of Nb content. From XRD results, the structure of $TiO_2$ formed on the Ti-xNb surface was anatase, and no peaks of $Nb_2O_5$ or other Nb oxide were detected suggesting that Nb atoms are dispersed in $TiO_2$-based solid solution. Surface roughness test and SEM results, pore size formed on surface and surface roughness decreased as Nb content increased. From the line analysis results, intensity of Ti peak was high in the center of pore, whereas, intensity of O peak was high in the outside of pore center.

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.99-104
• /
• 2004

We have studied to understand the barrier and interface qualities and structural changes through measuring temperature dependent spin-polarization as functions of plasma oxidation time and annealing time. Magnetic tunnel junctions consisting of SiO2$_2$/Ta 5/CoFe 17/IrMn 7.5/CoFe 5/Al 1.6-Ox/CoFe 5/Ta 5 (numbers in nm) were deposited and annealed when necessary. A 30 s,40 s oxidized sample showed the lowest spin-polarization values. It is presumed that tunneling electrons were depolarized and scattered by residual paramagnetic Al due to under-oxidation. On the contrary, a 60s, 70 s oxidized sample might have experienced over-oxidation, where partially oxidized magnetic dead layer was formed on top of the bottom CoFe electrode. The magnetic dead layer is known to increase the probability of spin-flip scattering. Therefore it showed a higher temperature dependence than that of the optimum sample (50 s oxidation). temperature dependence of 450 K annealed samples was improved when the as-deposited one compared. But the sample underwent 475 K and 500 K annealing exhibits inferior temperature dependence of spin-polarization, indicating that the over-annealed sample became microstucturally degraded.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.3
• /
• pp.134-138
• /
• 2012

Recently the preparation magnetic nanoparticles by a pulsed laser ablation in liquid has gained much attention because it is easy to control experimental parameters. Iron oxide magnetic nanoparticles have been prepared by a pulsed laser ablation of ${\alpha}-Fe_2O_3$ target in ethanol at different magnitude of laser energy of 1, 20, 40 and 80 mJ/pulse. It revealed that particle size increases with increasing laser energy. It could be concluded that 40 mJ/pulse is an optimum laser energy for the preparation of iron oxide nanoparticles with uniform size distribution. The nanoparticles are homogeneously dispersed in ethanol and their stability maintained for several months.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.410-416
• /
• 2004

In this study, we fabricated magnetite coated on a cordierite honeycomb which has complex shape by ultrasound-enhanced ferrite plating. The effects of the plating condition on the formation of the magnetite and its microstructure were investigated. The magnetite coated on the honeycomb became an oxygen-deficient ferrite by H$_2$ gas reduction, then the effects of the molar concentrations of ammonium acetate for $CO_2$ gas decomposition have been studied. As the molar concentration of a pH buffer($CH_3$COONH$_4$, 0.1946∼0.3892 M) solution increased, the average particle size increased about 200∼250 nm. The magnetite coated on the honeycomb was reduced by H$_2$ gas for 2 h at 30$0^{\circ}C$. The inner pressure change in the cell began to occur at 315∼34$0^{\circ}C$. The H$_2$-Reduced magnetite coated on the honeycomb at 35$0^{\circ}C$ contained an oxygen deficient magnetite and $\alpha$-Fe phase. The thermogravimetric analysis with H$_2$ reduction and $CO_2$ decomposition were carried out with the magnetite coated on the honeycomb. A weight loss in process of H$_2$ reduction occurred between 32$0^{\circ}C$ and 34$0^{\circ}C$, while a weight gain was observed during the $CO_2$ decomposition.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.3
• /
• pp.287-294
• /
• 2015

In this study, we investigated the antioxidative effects of brown seaweed Ecklonia cava extract and its subfractions. All experiments were performed with 50% ethanol extract, ethyl acetate fraction and aglycone fraction of E. cava. The free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activities ($FSC_{50}$) of ethyl acetate fraction ($FSC_{50}=6.98{\mu}g/mL$) and aglycone fraction ($7.03{\mu}g/mL$) are similar to that of (+)-${\alpha}$-tocopherol ($8.98{\mu}g/mL$) which is a reference control. Reactive oxygen species (ROS) scavenging activity (total antioxidant capacity, $OSC_{50}$) of the aglycone fraction ($OSC_{50}=14.48{\mu}g/mL$) on ROS generated in $Fe^{3+}-EDTA/H_2O_2$ system using the luminol-dependent chemiluminescence assay was the strongest among all extract and fractions. However, all samples showed lower antioxidant activities than that of L-ascorbic acid ($6.88{\mu}g/mL$) known as a powerful antioxidant. The protective effect of 50% ethanol extract on the $^1O_2$-induced cellular damage of human erythrocytes was dependent on the concentration from 5 to $50{\mu}g/mL$. Both ethyl acetate fraction and aglycone fraction showed strong cellular protective activities at $10{\mu}g/mL$, where the cellular protective effects (${\tau}_{50}$) of each fraction were recorded 442.0 min and 539.9 min, respectively. Three kinds of extract/fractions of E. cava showed much greater cellular protective activities at $10{\mu}g/mL$ than that of liposoluble antioxidant (+)-${\alpha}$-tocopherol (40.6 min) which is a reference control. These results suggest E. cava extracts and its fractions can be applied as an antioxidant ingredient in a field of cosmetics.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.511-516
• /
• 2004

A Li$[Co_{0.17}Li_{0.28}Mn_{0.55}]O_2$ cathode compound was prepared by a simple combustion method. The X-ray diffraction pattern showed that this compound could be classified as ${\alpha} -NaFeO_2$ structure type with the lattice constants of a = 2.8405(9) ${\AA}$ and c = 14.228(4) ${\AA}$. According to XANES analysis, the oxidation state of Mn and Co ions in the compound were 4+ and 3+, respectively. During the first charge process, the irreversible voltage plateau at around 4.65 V was observed. The similar voltage-plateau was observed in the initial charge profile of other solid solution series between $Li_2MnO_3\;and\;LiMnO_2$ (M=Ni, Cr...). The first discharge capacity was 187 mAh/g and the second discharge capacity increased to 204 mAh/g. As the increase of cycling number, one smooth discharge profile was converted to two distinct sub-plateaus and the discharge capacity was slowly decreased. From the Co and Mn K-edge XANES spectra measured at different cyclic process, it can be concluded that irreversible transformation of phase is occurred during continuous cycling process.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.21-27
• /
• 1985

A bacterium which utilizes ${\varepsilon}$-caprolactam as a sole source of carbon and nitrogen was isolated from sludge of Shinchun river in Taegu and identified as Arthrobacter globiformis N-2-l. The growth medium for the optimum culture condition was composed of 0.4% ${\varepsilon}$-caprolactam, 0.02% $K_2HPO_4$, 0.05% $KH_2PO_4$, 0.02% $MgSO_4{\cdot}7H_2O$, 0.01% $FeCl_3{\cdot}6H_2O$ and 0.05% yeast extract. The optimum pH and temperature for growth were 7.0 and $30^{\circ}C$ respectively. The bacterial growth on the ${\varepsilon}$-caprolactam medium did not require any other organic nitrogen source such as yeast extract, although it was remarkably stimulated by the yeast extract. The bacteria utilized wide range of sugars and organic acids such as ${\alpha}$-ketoglutarate, adipate and P-hydroxybenzoate. The bacteria could use all kind of amino acids, ${\varepsilon}$-Caprolactam in the medium was consumed completely in the timecourse culture at $30^{\circ}C$ for 60 hr on the shaker by the bacteria. Decomposition product of ${\varepsilon}$-caprolactam by Arthrobacter globiformis N-2-1 was ${\varepsilon}$-aminocaproic acid.

• Fashion & Textile Research Journal
• /
• v.13 no.5
• /
• pp.790-796
• /
• 2011

This study was designed to investigate the influence of ratio of anionic/nonionic surfactant mixture on detergency of particulate soil under various solutions. The detergency of the particulate soil was determined by adhesion of particle to fabric and its removal from fabric separately. The PET fabric and ${\alpha}-Fe_2O_3$were used as materials of textile and model of particulate soil, respectively. The detergency was investigated as a function of surfactants concentration, ionic strength, kinds of electrolyte and mole numbers of oxyethylene ether of nonionic surfactant in different ratio of anionic/nonionic surfactant mixture. Although some deviations exist, the adhesion of particle to fabric generally increased with decreasing its removal from fabric. The detergency of particulate soil on PET fabric was relatively higher in anionic/nonionic surfactant mixed solution than in each single surfactant solution, but the influence of ratio of anionic/nonionic surfactant mixture on detergency of particulate soil was low. Generally the detergency of particulate soil on fabric was at its maximum at 0.1% surfactant concentration, $1{\times}10^{-3}$ ionic strength, $Na_5P_3O_{10}$ electrolytes and 10 mole numbers of oxyethylene ether of nonionic surfactant, regardless of ratio of anionic/nonionic surfactant mixture.

• Korean Journal of Materials Research
• /
• v.21 no.7
• /
• pp.357-363
• /
• 2011

In this paper, high temperature oxidation behavior of newly developed alloys, Ti-6Al-4Fe and Ti-6Al-1Fe, is examined. To understand the effect of Fe on the air oxidation behavior of the Ti-Al-Fe alloy system, thermal oxidation tests are carried out at $700^{\circ}C$ and $800^{\circ}C$ for 96 hours. Ti-6Al-4V alloy is also prepared and tested under the same conditions for comparison with the developed alloys. The oxidation resistance of the Ti-Al-Fe alloy system is superior to that of Ti-6Al-4V alloy. Ti-6Al-4V shows the worst oxidation resistance for all test conditions. This is not a result of the addition of Fe, but rather it is due to the elimination of V, which has deleterious effects on high temperature oxidation. The oxidation of the Ti-Al-Fe alloy system follows the parabolic rate law. At $700^{\circ}C$, Fe addition does not have a noticeable influence on the amount of weight gain of all specimens. However, at $800^{\circ}C$, Ti-6Al-4Fe alloy shows remarkable degradation compared to Ti-6Al-1Fe and Ti-6Al. It is discovered that the formation of $Al_2O_3$, a diffusion resistance layer, is remarkably hindered by a relative decrease of the ${\alpha}$ volume fraction. This is because Fe addition increases the volume fraction of ${\beta}$ phase within the Ti-6Al-xFe alloy system. Activities of Al, Ti, and Fe with respect to the formation of oxide layers are calculated and analyzed to explore the oxidation mechanism.

• Journal of Hydrogen and New Energy
• /
• v.27 no.3
• /
• pp.290-297
• /
• 2016

The absorbent loss due to degradation in $CO_2$ capture process using aqueous alkanol amine solution has adverse effect on the economics of overall process. The degradation causes absorbent loss, equipment corrosion, foaming, adhesive material producing and viscosity increase in operation. In this study, the degradation characteristics of $CO_2$ capture process using MEA (monoehtanolamine) under various conditions such as $O_2$ partial pressure, $CO_2$ loading and absorbent temperature. The effects of iron, which generated from the equipment corrosion, on absorbent degradation were studied using $Fe_2SO_4$ containing MEA solution. The produced gases were analyzed by FT-IR(Fourier Transform Infrared Spectrophotometer) and the specifically measured $NH_3$ concentration was used as a degradation degree of aqueous MEA solution. The experiments showed that the higher $CO_2$ loadings (${\alpha}$), $O_2$ fraction ($y_{O2}$) and reaction temperature enhanced the more degradation of aqueous MEA solution. Comparing other operation parameters, the reaction temperature most affected on the degradation. Therefore, it could be concluded that the above parameters affects on degradation should be considered for the selections of $CO_2$ absorbent and operating conditions.