• Journal of Korean Neurosurgical Society
• /
• v.47 no.1
• /
• pp.30-35
• /
• 2010

Objective: The purpose of this study is to explain the effect and reciprocal action among tumor necrosis factor (TNF) like weak inducer of apoptosis (TWEAK), fibroblast growth factor-inducible 14 (Fn14), and transforming growth factor-$\beta1$ (TGF-$\beta1$) on degeneration of human intervertebral disc (IVD). Methods: Human intervertebral disc tissues and cells were cultured with Dulbecco's Modified Eagle's Medium/Nutrient F-12 Ham (DMEM/F-12) media in $37^{\circ}C$, 5% $CO_2$ incubator. When IVD tissues were cultured with TWEAK, Fn14 that is an antagonistic receptor for TWEAK and TGF-$\beta1$, the level of sulfated glycosaminoglycan (sGAG) was estimated by dimethyl methyleneblue (DMMB) assay and sex determining region Y (SRY)-box 9 (Sox9) and versican messenger ribonucleic acid (mRNA) levels were estimated by reverse transcriptase polymerase chain reaction (RT-PCR). Results: When human IVD tissue was cultured for nine days, the sGAG content was elevated in proportion to culture duration. The sGAG was decreased significantly by TWEAK 100 ng/mL, however, Fn14 500 ng/mL did not change the sGAG production of IVD tissue. The Fn14 increased versican and Sox9 mRNA levels decreased with TWEAK in IVD tissue TGF-$\beta1$ 20 ng/mL elevated the sGAG concentration 40% more than control. The sGAG amount decreased with TWEAK was increased with Fn14 or TGF-$\beta1$ but the result was insignificant statistically. TGF-$\beta1$ increased the Sox9 mRNA expression to 180% compared to control group in IVD tissue. Sox9 and versican mRNA levels decreased by TWEAK were increased with TGF-$\beta1$ in primary cultured IVD cells, however, Fn14 did not show increasing effect on Sox9 and versican. Conclusion: This study suggests that TWEAK would act a role in intervertebral disc degeneration through decreasing sGAG and the mRNA level of versican and Sox9.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.609-621
• /
• 1997

The purpose of this study was to evaluate the shear bond strength of three light-cured glass ionomer cements to blood contaminated bovine dentin. The materials used in this study were Fuji II LC, Dyract and Variglass VLC. The dentin conditioners were 10% polyacrylic acid, 10% maleic acid and 10% phosphoric acid. 180 lower anterior bovine teeth were selected in this study. The teeth were embedded in acrylic resin and were grounded with 320 to 600 grit silicon carbide paper to create a flat dentin surface. The teeth were divided into SIX groups. The experimental procedures in six groups were as follows; Group l(GF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment. Group 2(BGF) : Samples bonded to dentin surface with Fuji II LC after 10% polyacrylic acid treatment and blood contamination. Group 3(MD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment. Group 4(BMD) : Samples bonded to dentin surface with Dyract after 10% maleic acid treatment and blood contamination. Group 5(PV) : Samples bonded to dentin surface with Variglass VLC after 10% phosphoric acid treatment. Group 6(BPV) : Samples bonded-to dentin surface with Variglass VLC after 10% phosphoric acid treatment and blood contamination. Group 1,3 and 5 were classified into the control groups, while group 2,4 and 6 were classified into the experimental groups. Each group contained 30 samples. After 24 hours water storage at $37^{\circ}C$, all smples were subjected to a shear load to fracture at a cross head speed of 1.0 mm/min with Instron universal testing machine(No. 4467). Debonded surfaces were observed under Scanning Electron Microscope(Hitachi S-2300) at 20kvp. The data were evaluated statistically at the 95% confidence level with Student's t-test. The following results obtained; 1. Shear bond strengths were higher in the control groups(1,3,5 group) than in the experimental groups(2,4,6 group). 2. The shear bond strength of group 5(PV) was the highest in the control groups, and the group 5 was significantly higher than the group l(GF) on the shear bond strength. 3. The group 4(BMD) was the highest on the shear bond strength, and the group 2(BGF) was the lowest in the experimental groups. The group 4(BMD) and 6(BPV) showed a significant difference with the group 2 on the shear bond strength. 4. All the groups showed an adhesive-cohesive failure. except the group 2(BGF) showing adhesive failure.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.1
• /
• pp.41-49
• /
• 1989

This study was carried out to study influence of antioxidants on serum and tissue of rats fed with thermally oxidized oil. The experimental animals used 30male rats of sprague-dawley weighting $150{\pm}25g$. They are divided into 5 groups and fed to experimental diets which are composed of 15％ thermally oxidized oil in addition to ascorbic acid, Vitamin E, Ethylendintrioteraaceticacid(EDTA) and none added oxidized oil by heat and fresh soybean oil group. Thermally oxidized oil was prepared from the soybean oil by heating at $180^{\circ}C$ for 30 hours. After feeding for 4 weeks, the result are as follows; 1. Body weight gain were lower B diet group than A diet group. 2. Total cholesterol levels in serum of all experimental diet groups except B diet group were higher than that of A diet group. 3. HDL-cholesterol levels of all experimental diet groups except E diet group were lower than that of A diet group. 4. The activities of GOT, GPT in serum of all experimental diet groups except B diet group and D diet group were higher than that of A diet group. 5. Vitamin E levels in serum of E diet group were highest than that of all experimental diet groups, and Vitamin E levels in liver of A diet group were highest than that of all experimental diet groups. 6. Lipid peroxide in Serum were highest B diet group than that of all experimental diet groups and the other experimental diet group significantly lower than that of the A diet group. 7. Lipid peroxide in liver of all experimental diet group except E diet group were significantly higher than that A diet group and lipid peroxide in kidney of all experimental diet group except B diet group were lower than that of A diet group. Four these results, as Vitamin C, Vitamin E, and EDTA added diets have effect of thermally oil by antioxidants, it could be suggested that thermally soybean oil diet has required to add antioxidant because it has not sufficient Vitamin E for antioxidant and intake and overtake level of thermally soybean oil diet should be studied to go ahead.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.39-49
• /
• 1986

The purpose of this study was to observe characteristic properties through the polarization curves and SEM images from 4 different types of amalgam obtained by using the potentiostats (Princeton EG & G) & SEM (Jeol/35), and to investigate the degree of corrosion on the oxidation peak of the each phase of amalgam. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by means of the mechanical amalgamator (Shofu Co.), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10.0mm in height and was condensed by using routine manner. The specimen was removed from the mold and stored at room temperature for about 24 hours. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to confirm the corrosion behaviour of the amalgams in a 0.9% saline solution (P.H: 6.8-7.0) at $37^{\circ}C$. The initial rest potential (corrosion potential) was determined after 30 minutes of immersion of specimen in electrolyte, and the potential scan was begun at the point of 100mV cathodic from the corrosion potential. The scan rate was 0.17mV/sec. in the study to observe the degree of corrosion of each phase. SEI and EPMA images on the determined oxidation peaks of each amalgam were observed. The results were as follows: 1. In the four anodic polarization curves, low copper amalgams have three oxidation peaks and high copper amalgams have two oxidation peaks, -270mV, +26mV and +179mV(SEC) in the low copper lathe cut, and -300mV, +39mV and +163mV(SEC) in the low copper spherical. -4mV and +154mV(SEC) in the Dispersalloy, and +17mV and +180mV(SEC) in the Tytin as high copper amalgams. 2. ${\gamma}_2$ phase in the low copper amalgam and ${\eta}$ phase in the high copper amalgam were the most corrodible phases and Ag-Cu eutectic in high copper amalgam was the most slowly corroded phase. 3. Low copper amalgam was more susceptible in corrosion than high copper amalgam.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.8
• /
• pp.1113-1120
• /
• 2011

Enzymatic interesterification was conducted with the palm mid fraction (PMF) and stearic ethyl ester for 1, 5, and 9 hr at 46$^{\circ}C$. The reaction was catalyzed by Lipozyme TLIM (2, 3, and 4% by weight of total substrates) in a shaking water bath at 180 rpm. As the reaction continued, oleic acid (C18:1) content at the sn-2 position decreased, whereas saturated fatty acid (C16:0 and C18:0) content increased. In the high performance chromatography analysis, 1,3-dipalmitoyl-2-oleoyl glycerol content decreased, whereas 1(3)-palmitoyl-2-oleoyl-3(1)-stearoyl glycerol (POS) content increased up to the reaction equilibrium. The rate of acyl migration increased with increasing molar ratio and enzyme load as well as reaction time. The optimal reaction conditions for maximizing POS content (53.5 area%) and minimizing acyl migration (23.1 area%) were obtained with a PMF : stearic ethyl ester=1:2 (molar ratio), Lipozyme TLIM 3 wt%, and a reaction time of 5 hr.

• Proceedings of the KSMRM Conference
• /
• 2002.11a
• /
• pp.133-133
• /
• 2002

Purpose： The purpose of paper is to implement software to visualize brain fiber tract using a 24-bit color coding scheme and to test its feasibility. Materials and Methods： MR imaging was performed on GE 1.5 T Signa scanner. For diffusion tensor image, we used a single shot spin-echo EPI sequence with 7 non-colinear pulsed-field gradient directions： (x, y, z)：(1,1,0),(-1,1,0),(1,0,1),(-1,0,1),(0,1,1),(0,1,-1) and without diffusion gradient. B-factor was 500 sec/$\textrm{mm}^2$. Acquisition parameters are as follows： TUTE=10000ms/99ms, FOV=240mm, matrix=128${\times}$128, slice thickness/gap=6mm/0mm, total slice number=30. Subjects consisted of 10 normal young volunteers (age：21∼26 yrs, 5 men, 5 women). All DTI images were smoothed with Gaussian kernel with the FWHM of 2 pixels. Color coding schemes for visualization of directional information was as follows. HSV(Hue, Saturation, Value) color system is appropriate for assigning RGB(Red, Green, and Blue) value for every different directions because of its volumetric directional expression. Each of HSV are assigned due to (r,$\theta$,${\Phi}$) in spherical coordinate. HSV calculated by this way can be transformed into RGB color system by general HSV to RGB conversion formula. Symmetry schemes： It is natural to code the antipodal direction to be same color(antipodal symmetry). So even with no symmetry scheme, the antipodal symmetry must be included. With no symmetry scheme, we can assign every different colors for every different orientation.(H =${\Phi}$, S=2$\theta$/$\pi$, V=λw, where λw is anisotropy). But that may assign very discontinuous color even between adjacent yokels. On the other hand, Full symmetry or absolute value scheme includes symmetry for 180$^{\circ}$ rotation about xy-plane of color coordinate (rotational symmetry) and for both hemisphere (mirror symmetry). In absolute value scheme, each of RGB value can be expressed as follows. R=λw｜Vx｜, G=λw｜Vy｜, B=λw｜Vz｜, where (Vx, Vy, Vz) is eigenvector corresponding to the largest eigenvalue of diffusion tensor. With applying full symmetry or absolute value scheme, we can get more continuous color coding at the expense of coding same color for symmetric direction. For better visualization of fiber tract directions, Gamma and brightness correction had done. All of these implementations were done on the IDL 5.4 platform.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1721-1725
• /
• 2010

This paper reports the fabrication of geometry-controlled carbon microneedles by a backside exposure method and pyrolysis. The SU-8 microneedles are a polymer precursor in a carbonization process, which geometries such as base diameter, spacing, and aspect ratio can be controlled in a photolithography step. Using this fabrication method, highly reproducible carbon microneedles, which have high aspect ratios of more than 10 and very sharp nanotips, can be realized. The quartz surface with carbon microneedles becomes very hydrophilic and its wettability is adjusted by carrying out the silane treatment. In the carbon microneedle array ($3\;{\mu}m{\times}3\;{\mu}m$), the contact angle is extremly enhanced (${\sim}180^{\circ}$); this will be advantageous in developing low-drag microfluidics and labs-on-a-chip as well as in other bio-applications.

• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.241-248
• /
• 2006

Conditions for extraction of antimicrobial materials from licorice root, Glycyrrhiza glabra, were optimized. Among solvents tested, 95% ethanol gave highest antimicrobial activity, and was chosen as optimal extracting solvent. Extraction temperature and time were optimal at room temperature and for 12 hr, respectively. Minimal inhibitory concentration (MIC) of 95% ethanol extracts was determined against 14 microorganisms. Reference microorganisms included 6 Gram(-) bacteria, 4 Gram(+) bacteria, and 4 yeast strains. Ethanol extract exerted very strong growth inhibition on Gram(+) bacteria, while was moderately effective for Gram(-) bacteria and yeasts. Treatment at $180^{\circ}C$ for 30 min or extreme pHs merely destroyed antimicrobial activity of ethanol extract. These findings suggest ethanol extract of G glabra may be useful as natural preservative.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.238-243
• /
• 2011

Organic/inorganic hybrid materials have a lot of interest in various areas due to their fascinating properties. To control the location and dispersion of inorganic nanoparticles within polymer matrix. thiol-terminated polymeric ligands have been widely used to tune the surface property of nanoparticles. However, the specific binding between the thiol functional group and metal is unstable with increasing temperature. To archive the thermally-stable Au nanoparticles, we previously synthesized various UV-crosslinkable polymeric ligands, which have different compositions of polar, UV-crosslinkable azide unit comparing to non-polar 스티렌 units. After crosslinking the Au nanoparticles, it was found that the nanoparticles had superb stability at high temperature (above $180^{\circ}C$). In this work, we used thermally-stable Au nanoparticles to control the location within the polymer matrix. By changing the amount of polar azide units in the polymeric ligands, we could precisely control the location of nanoparticles from one domain to the interface of block copolymer templates.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.662-669
• /
• 2010

To develop the manufacturing methods for the blanket first wall (FW) of the International Thermonuclear Experimental Reactor (ITER) and to verify the integrity of the joint, Be/Cu mockups were fabricated and tested at the KoHLT-1 (Korea Heat Load Test facility), a graphite heater facility located at the Korea Atomic Energy Research Institute (KAERI). Since Be and Cu joining is the focus of the present study, the fabricated mockups had a CuCrZr heat sink joined with three Be tiles as an armor material, unlike the original ITER blanket FW, which has a stainless steel structure and coolant tubes. Hot isostatic pressing (HIP) was carried out at $580^{\circ}C$ and 100 MPa for 2 hours as the method for Be/Cu joining. Three interlayers, namely, $1{\mu}mCr/10{\mu}mCu$, $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$, and $5{\mu}mTi/10{\mu}mCu$ were applied as a coating to the Be tiles by a physical vapor deposition (PVD) method. A shear test was performed with the specimens, which were fabricated by the same methods as those used to fabricate the mockups. The average values were 125 MPa to 180 MPa, and the samples with the $1{\mu}mCr/10{\mu}mCu$ interlayer showed the lowest value. No defect or delamination was found in the joints of the mockups by the developed ultrasonic test using a flat-type probe with a 10 MHz frequency and a 0.25 inch diameter. High heat flux (HHF) tests were performed at $1.0\;MW/m^2$ heat flux for each mockup using the given conditions, and the results were analyzed by ANSYS-CFX code. For the test criteria, an expected fatigue lifetime about 1,000 cycles was obtained by analysis with ANSYS-mechanical code. Mockups using the interlayers of $1{\mu}mTi/0.5{\mu}mCr/10{\mu}mCu$ and $5{\mu}mTi/10{\mu}mCu$ survived up to 1,100 cycles over the required number of cycles. However, one of the Be tiles in the other two mockups using the $1{\mu}mCr/10{\mu}mCu$ interlayer was detached during the screening test, and others were detached by discharge after 862 cycles. The integrity of the joints using the proposed interlayers was proven by the HHF test, but the other interlayer requires more study before it can be used for the joining of Be to Cu. Moreover, it was confirmed that the measured temperatures agreed well with the analysis temperatures, which were used to estimate the lifetime and that the developed facility showed its capability of the long time operation.