• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.572-580
• /
• 2019

Recently, it has been reported that benzyl alcohol (BzOH) as an additive in cosmetics, food, and medicine lead to toxicity and allergy problem. Then, to circumvent this hurdle, we carried out the synthesis of benzyl alcohol galactoside (BzO-gal). Previously, it was confirmed that BzO-gal was synthesized by transgalactosylation reaction using Escherichia coli (E. coli) ${\beta}$-galactosidase (${\beta}-gal$). Meanwhile, in this study, two peaks of BzO-gal as sodium adduct ion (m/z=293.1004) and protonated ion (m/z=271.1180) were detected in the reaction mixture by liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS). In addition, the amount of ${\beta}-gal$ and BzOH concentration, temperature, pH, and lactose concentration, respectively, were optimized (${\beta}-gal$, 0.75 U/mL; BzOH, 185 mM; temperature, $40^{\circ}C$, pH, 7.5; lactose, 350 g/l). Under these optimal conditions, 185 mM BzOH was converted into about 131 mM BzO-gal, in which the conversion yield was about 72%. In the future, BzO-gal will be applicable as a substitute for BzOH as a less toxic preservative for the cosmetic, pharmaceutical, and food industries, and we are planning to investigate the characteristics of BzO-gal as a preservative.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.84-89
• /
• 2019

To characterize the molecular structure of BzO-gal synthesized using Escherichia coli ${\beta}$-gal, NMR ($^1H$- and $^{13}C$-) spectroscopy and mass spectrometry of BzO-gal were conducted. $^1H$ NMR spectrum of BzO-gal showed multiple peaks corresponding to the galactosyl group, which is an evidence of galactosylation on BzOH. Five proton peaks around the aromatic region at ${\delta}_H$ 7.43 ~ 7.24 ppm and 2 peaks from ${\delta}_H$ 4.93 and 4.67 ppm were evidence of the presence of the benzyl group. Seven proton peaks at ${\delta}_H$ 4.32 ~ 3.46 ppm showed the presence of a monosaccharide and were indicative of galactosylation on BzOH. $^{13}C$ NMR spectrum also revealed the presence of 11 carbons suggestive of BzO-gal. The mass value (sodium adduct ion of BzO-gal, m/z = 293.0994) from mass spectrometry analysis of BzO-gal, and $^1H$ and $^{13}C$ NMR spectral data were in good agreement with the expecting structure of BzO-gal. We are expecting that through future study it will eventually be able to develop a new additive of low cytotoxicity.

• Journal of the Korean Chemical Society
• /
• v.53 no.1
• /
• pp.7-16
• /
• 2009

The global minimum structures of the benzene-water, Bz-$H_2O$ and benzene-water cation complex, [Bz-$H_2O]^+$ have been investigated using ab initio and density functional theory(DFT) with very large basis sets. The highest levels of theory employed in this study are B3LYP/cc-pVQZ for geometry optimization and MP2/aug-cc-pVTZ//B3LYP/aug-cc-pVTZ for binding energy. The harmonic vibrational frequencies and IR intensities are also determined at the various levels of theory to confirm whether the structure of water complex is affected by the presence of benzene. The binding energies of Bz-$H_2O$ (N-1) structure are predicted to be 3.92 kcal/mol ($D_e$) and 3.11 kcal/mol ($D_0$) after the zero-point vibrational energy correction at the MP2/cc-pVQZ//B3LYP/cc-pVQZ level of theory. The binding energies of [Bz-$H_2O]^+$ (C-1) structure are predicted to be 9.06 kcal/mol for $D_e$ and 7.82 kcal/mol for $D_0$ at the same level of theory.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.397-405
• /
• 1985

The adsorption behaviors of some oxime compounds well known as metal chelating agents on the Amberlite XAD resins were compared by measuring their distribution coefficients (log Kd) in various media, respectively. Among the oxime compounds, salicylaldoxime (SAO) and $\alpha-benzoinoxime(${\alpha}$-BzO)$ which showed large log Kd values were chosen. The characteristics of XAD-4 resins impregnated with SAO and ${\alpha}$-BzO have been studied to apply them for the adsorption and recovery of minute quantities of metal ions in aqueous solution. The optimum conditions for adsorption of SAO and ${\alpha}$-BzO on the resin were 30% methanol media having pH range of 1~8(for SAO) and 1~9 (for ${\alpha}$-BzO), respectively. The distribution coefficients of two oxime compounds were decreased as temperature increased. From the adsorption enthalpy data of SAO and ${\alpha}$-BzO, ranging from 4.96 to 6.66 Kcal/mol, it is suggested that their adsorption mechanism on XAD-4 resin is likely due to molecular adsorption equivalent to dipole-dipole interaction. The impregnated resins were considerably stable in the aqueous solutions of pH 5.0~10.0 and in 0.1~5M hydrochloric acid solutions. The former is the medium for adsorption of metal ions, while the latter is for recovery of the adsorbed metal ions. The adsorption mole ratio of Mn(II), Co(II), Ni(II), Zn(II) ions on SAO-XAD-4 and ${\alpha}$-BzO-XAD-4 resins were about 1 : 2 at the optimum conditions, respectively. The adsorbed metal ions were recovered completely by eluting with 3M HCl-50% methanol solution

• Journal of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.201-206
• /
• 1986

A new analytical reagent N-benzylisonitrosoacetylacetone imine (H-IAA-N-Bz) has been synthesized and identified its structure by IR, NMR and mass spectra. H-IAA-N-Bz forms a copper chloroform-soluble complex in a basic aqueous solution (pH = 7.0∼10.0). The other optimum conditions for the spectrophotometric study of the copper complex have been determined at 420nm. Beer's law is obeyed below the concentration of 64$\mu$g of copper per 10ml of chloroform. The composition of the copper complex has been found to be $Cu(IAA-N-Bz)_2$ and the over-all stability constant is calculated to be $8.55 {\times} 10^6$. The molar absorption coefficient, $\varepsilon$ of the $Cu-(IAA-N-Bz)_2 $complex is 3500l/$cm{\cdot}mol$.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.977-982
• /
• 2004

The reaction of $cis-[Cr([14]-decane)(OH_2)_2]^+$ ([14]-decane = rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-teraazacyclotetradecane) with auxiliary ligands {$L_a$ = benzoate(bz) or chlorobenzoate(cbz)} leads to a new compound $[Cr([14]-decane)(bz)_2]ClO_4$ or $[Cr([14]-decane)(cbz)_2]ClO_4$. These complexes have been characterized by a combination of elemental analysis, conductivity, IR and Vis spectroscopy, mass spectrometry, and X-ray crystallography. The crystal structure of $[Cr([14]-decane)(cbz)_2]^+$ was determined. The complex shows a distorted octahedral coordination environment with the macrocycle adopting a folded cis-V conformation. The angle $N_{axial}-Cr-N_{axial}$ deviates by $14.5^{\circ}$ from the ideal value of $180^{\circ}$for a perfect octahedron. The bond angle cis-O-Cr-O between the Cr(III) ion and the two carboxylate oxygen atoms of the monodentate p-chlorobenzoate ligands is close to 90$^{\circ}$. The FAB mass spectra of the $cis-[Cr([14]-decane)(La)_2]ClO_4$ display peaks due to the molecular ions $[Cr([14]-decane)(bz)_2-H]^\;,\;[Cr([14]-decane)(cbz)_2-2H]^$ at m/z 578, 646, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.917-920
• /
• 2007

Ketene-forming eliminations from C4H3(S)CH2C(O)O-C6H3-2-X-4-NO2 (1) promoted by R2NH in MeCN have been studied kinetically. The reactions are second-order and exhibit Bronsted β =0.51-0.62 and |βlg|= 0.47-0.53. Hence, an E2 mechanism is evident. The Bronsted β increased from 0.33 to 0.53 and |βlg| remained nearly the same by the change of the base-solvent from Bz(i-Pr)NH/Bz(i-Pr)NH2+ in 70 mol% MeCN(aq) to Bz(i-Pr)NH-MeCN, indicating a change to a more symmetrical transition state with similar extents of Cβ -H and Cα -OAr bond cleavage. When the β-aryl group was changed from thienyl to phenyl in MeCN, the β value increased from 0.53 to 0.73 and |βlg| decreased from 0.53 to 0.43. This indicates that the transition state became skewed toward more Cβ -H bond breaking with less Cα-OAr bond cleavage. Noteworthy is the greater double bond stabilizing ability of the thienyl group in the ketene-forming transition state.

• Journal of the Korean Chemical Society
• /
• v.47 no.5
• /
• pp.472-478
• /
• 2003

In this work, the zeolite/diglycidylether of bisphenol A(DGEBA) systems were investigated in terms of the cure kinetics and mechanical interfacial properties of the composites. The 4, 4-diamino diphenyl methane(DDM) was used as a curing agent for epoxy. Two types of zeolite(PZ) were prepared with 15 and 35 wt% KOH treatments(15-BZ and 35-BZ, respectively) for 24 h, and their surface characteristics were studied by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction(XRD). Cure kinetics of the composites were examined in the context of differential scanning calorimetry(DSC), and mechanical interfacial properties were investigated in critical stress intensity factor($K_{IC}$) and critical strain energy release rate($G_{IC}$). In the results of XPS and XRD, sodium ion(Na) of zeolite was exchanged for potassium ion(K), resulting from the treatment of KOH. Also, $Si_{2p}/Al{2p}$ composition ratios of the treated zeolite were increased, which could be attributed to the weakening of Al-O bond in framework. Cure activation energy($E_a$) of 15-BZ composites was decreased, whereas KIC and $G_{IC}$ were increased, compared with those of the pure zeolite/DGEBA composites. It was probably accounted that the acidity of zeolite was increased by surface treatments and the cure reaction between zeolite and epoxy was influenced on the increased acidity of zeolite.

• Journal of the Korean Ceramic Society
• /
• v.39 no.11
• /
• pp.1017-1022
• /
• 2002

$(Ba_{1-x}Ca_x)(Ti_{1-y}Zr_y)O_3(BCTZ)$ powders for the Ni-electrode Multilayer Ceramic Capacitor(MLCC) were synthesized via hydrothermal treatment using mixed aqueous solutions of $BaCl_2{\cdot}2H_2O,\Ca(NO_3)2{\cdot}4H_2O,\ ZrOCl_2{\cdot}8H_2O$ and $TiCl_4$. Two component and three component systems were also extensively studied for basic data. BT, CT and BZ powders were crystalline but CZ was determined to be amorphous under the same synthetic condition. In BTZ system, Zr and Ti were completely soluble and Ca would be substituted for Ba up to ∼6 mol% in BCT. The submicron-sized $(Ba_{0.95}Ca_{0.05})(Ti_{0.80}Zr_{0.20})O_3$ powder of the target composition was successfully synthesized at $150{\circ}$ for 12h.

• YAKHAK HOEJI
• /
• v.38 no.4
• /
• pp.455-461
• /
• 1994

Each nitrogen and oxygen site isotope enriched the cyclophosphamide metabolite phosphoramide mustard was synthesized. Reaction of N,N-bis(2-chloroethyl)phosphoramidic dichloride$[Cl_2P(O)N(CH_2CH_2Cl)_2]$ with benzyl alcohol and ammonia gave N,N-bis(2-chloroethyl)phosphorodiamidic acid phenylmethyl ester $[BzO(H_2N)P(O)N(CH_2CH_2Cl)_2]$. Catalytic hydrogenation of this benzyl ester followed by the addition of cyclohexylamine provided PM. Incorporation of $^{15}NH_3$ into this general scheme gave PM with a $^{15}NH_2$ moiety. Glycine-$^{15}N$ was converted to bis(2-chloroethyl)amine-$^{15}N$ hydrochloride which, in turn, provided for N,N-bis(2-chloroethyl)phosphorodiamidic-$^{15}N$ dichloride. Use of this compound in the general synthetic pathway yielded PM CHA with $^{15}N$ in the mustard moiety. $^{17}O$-Enriched PM was generated through the use of benzyl alcohol-$^{17}O$. To obtain the alcohol, labelled benzaldehyde was made by exchange with $^{17}OH_2$ and was then reduced with sodium borohydride.