• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1384-1386
• /
• 2001

In this paper, the structural and electrical properties of the $Sr_{1-x}Ca_xTiO_3$($0{\leq}x{\leq}0.2$)-based grain boundary layer ceramics were investigated by X-ray, SEM and V-I system. Increasing content of Ca, the average gram size and the lattice constant were decreased. The relative density of all specimens was > 96%. The 2nd phase formed by thermal diffusing from the surface lead to a very excellent electrical properties, that is, ${\varepsilon}_r$ > 50000, tan${\delta}$ < 0.05, $\Delta$C < ${\pm}$ 10%.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1275-1276
• /
• 2007

For fabrication of $BaTiO_3$ system Ferroelectric thick films, (Ba,Sr,Ca)$TiO_3$ (BSCT) powders, prepared by using the alkoxide-based sol-gel method, were doped $MnCO_3$ as acceptor and $Dy_{2}O_{3}$ as donor. $MnCO_3$ and $Dy_{2}O_{3}$-doped (Ba,Sr,Ca)$TiO_3$ thick films were fabricated by screen printing techniques on high purity alumina substrates. The structure and dielectric properties were investigated with variation of $Dy_{2}O_{3}$ amount. As a result of the differential thermal analysis(DTA), exothermic peak was observed at around $670^{\circ}C$ due to the formation of the polycrystalline perovskite phase. All the BSCT thick films, sintered at $1420^{\circ}C$ for 2h, showed the typical XRD patterns of perovskite polycrystalline structure and no pyrochlore phase was observed. The average grain size and thickness of specimens no doped with $Dy_{2}O_{3}$ was 1.32mm, 52mm, respectively. The relative dielectric constant decreased and dielectric loss increased with increasing amount of $Dy_{2}O_{3}$ dopant, the values of the BSCT thick films no doped with $Dy_{2}O_{3}$ were 4043 and 0.4% at 1 kHz, respectively. The relative dielectric constant gradually decreased in the measured frequency range from 0.1 to 100 kHz

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.9
• /
• pp.397-402
• /
• 2005

The ($Sr_{1-x}Ca_x)TiO_3(SCT)$ thin films are deposited on Pt-coated electrode (Pt/TiN/SiO$_{2}$Si) using RF sputtering method with substitutional contents of Ca. The optimum conditions of RF power and Ar/O$_{2}$ ratio were 140(W) and 80/20, respectively. Deposition rate of SCT thin film was about $18.75{\AA}$/min. The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over $15[mol\%]$. The capacitance characteristics had a stable value within $\pm4[\%]$ in temperature ranges of $-80\~+90[^{\circ}C]$. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 200[kHz].

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.534-542
• /
• 1994

Microstructures and dielectric properties of (Sr$_{1-x}$ .Ca$_{x}$)TiO$_{3}$+0.006Nb$_{2}$O$_{5}$ (0.05.leq.x.leq.0.2) ceramic were investigated. The specimens fired in a reducing atmosphere(N$_{2}$) were painted on the surface with CuO paste, and then annealed at 1100.deg. C for 2 hr. SEM and EDAX revealed that CuO penetrated rapidly into the bulk along the grain boundaries during the annealing. Grain size increased with increasing Ca content up to 15[mol%], but decreased with further addition. In the specimens with 10-15[mol%l of Ca, excellent dielectric properties were obtained as follows; dielectric constant <25000, dielectric loss(tan .delta[%]) <0.3[%] and capacitance change rate with temperature <.+-.[%], respectively. All the specimens in this study exhibited dielectric relaxation with frequency as a function of the temperature. The dispersive frequency was over 10$^{6}$ [Hz].z].

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.11
• /
• pp.550-554
• /
• 2001

$(Ba_{0.6}Sr_{0.4}Ca_x)TiO_3 + yAl_2O_3$ wt% (x=0.10, 0.15, 0.20, y=0~3.0) ceramics were fabricated by the mixed-oxide method, and their structural and dielectric properties were investigated with variation of composition ratio and $Al_2O_3$ doping content. As results of the X-ray diffraction and microstructure analysis, all BSCT specimens showed dense and homogeneous structure without presence of the second phase. The sintered density was decreased with an increase of $Al_2O_3$ doping content. The Curie temperature and relative dielectric constant at room temperature were decreased with increasing $Al_2O_3$doping content. The dielectric loss is minimum at BSCT doped with 1.5wt% $Al_2O_3$content. The tunability was decreased with increasing an Ca content and the BSCT(50/40/10) specimen doped with 2.0wt% $Al_2O_3$content showed the maximum value of 4.2%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.25-28
• /
• 1993

In this study, the dielectric properties of (Sr$\sub$1-x/Ca$\sub$x/)TiO$_3$+yNb$_2$O$\sub$5/(0.1 x 0.3, 0.004 y 0.008) ceramic capacitor were investigated. The specimen was sintered for 3hr at 1350$^{\circ}C$ in gas(N$_2$) atmosphere. The reduced specimen fared at 1200$^{\circ}C$ in air. The used specimens had the apparent permittivity of 3${\times}$10$^4$∼4${\times}$10$\^$5/, tan$\delta$ of 0.05 -0.2, and insulating resistance of 10$\sub$9/∼10$\^$12/ $\Omega$.cm. The specimens had the stable temperature coefficient of capacitance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.292-293
• /
• 2007

In the study, in order to develop low temperature sintering ceramics for multilayer piezoelectric transformer, $(Pb,Ca,Sr)Ti(Mn,Sb)O_3$ ceramics were fabricated using $Na_2CO_3$, $Li_2CO_3$, $MnO_2$ and $Bi_2O_3$ as sintering aids and their dielectric and piezoelectric properties were investigated according to the amount of $Bi_2O_3$ addition. At the sintering temperature of $900^{\circ}C$, density, thickness vibration mode electromechanical coupling factor ($k_t$), thickness vibration mode mechanical quality factor ($Q_{mt}$) and dielecteic constant (${\varepsilon}_r$) showed the optimum value of $6.94[g/cm^3]$, 0.497, 3,162 and 209, respectively, for multilayer piezoelectric transformer application.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.626-633
• /
• 1998

For the fabrication of low temperature cofirable glass/ceramic with high dielectric constant, crystallizing glass [$SiO_2-TiO_2-RO (RO:BaO, CaO:SrO)$] was formed. The glass/ceramic composites were made by mixing this glass and alumina ceramic as filler, and its characteristics was investigated. With this glass compositon, it was possible to fabricate the glass which could be crystallized under $900^{\circ}C$. And it was found that the crystallizing temperature was changed in accordance with the composition of RO in glass. By adding $Bi_2O_3$ as flux, using $Al_2O_3$ as filler and sintering at $860^{\circ}C$, low temperature cofirable glass/ceramic with high dielectric constant was fabricated. The density of that composites was 3.96 g/$\textrm{cm}^3$, dielectric constant was 17 and Q. f was 600.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1990.10a
• /
• pp.68-70
• /
• 1990

(1-X)(Sr$\_$7/9/Pb$\_$2/9/)$\_$(1-y)/(Ca$\_$1/5/Mg$\_$4/5/)$\_$y/TiO$_3$+X(BiO$_2$O$_3$$.$3TiO$_2$) (y=0.145, 0$\leq$X$\leq$0.08) ceramics were fabricated by the mixed oxide method. The sintering temperature and time were 1180∼1230[$^{\circ}C$], 2[hr], respectly. The grain size were grown with increasing the contents of Bi$_2$O$_3$$.$3TiO$_2$, but decreased more and less in the specimens which had more than 0.04[mol].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.406-409
• /
• 2001

In this paper, the microstructure and the dielectric properties of the Sr$_{1-x}$ Ca$_{x}$TiO$_3$(0$\leq$$\chi$$\leq$0.2) -based grain boundary layer ceramics were investigated. The specimens were sintered from 142$0^{\circ}C$ to 152$0^{\circ}C$ for 4hr. in $N_2$ gas. The 2nd phase formed by thermal diffusing from the surface lead to a very high apparent dielectric constant, $\varepsilon$$_{r}$>50000. The structural properties of the specimens were studied by X-ray diffraction and SEM, EDX. All specimens exhibited cubic structure. Increasing content of Ca, the peak intensity were decreased.ed.d.