• 자원리싸이클링
• /
• 제11권6호
• /
• pp.31-37
• /
• 2002

폐알루미늄 캔으로 제조된 2차지금과 신지금의 혼합비율에 따라 캔용 소재를 주조하고 미세조직을 조사하였다. 또한 주조후 열처리에 따른 상변화의 거동을 조사하였다. 2차지금의 혼합비율(20, 30, 40, 50, 60%)에 따라 캔용 소재를 전기로로 용해하고, ceramic filter를 사용하여 주조하였다. 주조후에는 주조조직 제어를 위해 균질화 열처리($615^{\circ}C$$\times$10hrs)를 하였다. 주조상태에서는 $\alpha$ 상($Al_{12}$ $(Fe,Mn)_3$Si), $\beta$상($Al_{6}$/(Fe,Mn)), 그리고 미세한 $Mg_2$Si상이 알루미늄 기지에 존재하며, 특히 가공성에 나쁜 영향을 미치는 것으로 알려진 $\beta$상이 많이 존재하였다. 그러나 균질화 열처리에 의해 이러한 $\beta$상은 유해성이 없는 $\alpha$상으로의 상변태가 일어났다. 기지내의 미세한 $Mg_2$Si상도 열처리에 의해 $\alpha$상으로 변화하였다. 주조시 여과된 조직을 분석한 결과 Fe, Cu, Si 등의 금속간화합물이 검출되었다.

• 한국자기학회지
• /
• 제9권1호
• /
• pp.17-22
• /
• 1999

육방구조의 M형 BaFe12O19를 NaCl를 첨가한 경우와 첨가하지 않은 경우에 질소가스 분위기와 공기 중에서 여러 온도로 가열하여 고상반응법으로 제조하였다. X-선 회절법과 Mossbauer분광법에 의하여 BaFe12O19상과 $\alpha$-Fe2O3상의 공존 정도를 알아냈다. 동일한 조건에서 NaCl를 첨가한 경우가 NaCl를 첨가하지 않은 경우 보다 $\alpha$-Fe2O3상이 적음을 확인하였다.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.655-659
• /
• 1998

과냉각된 melt-spun $Nd_{14.73}Fe_{78.67}B_{6.60}$리본의 급속응고속도 및 열처리에 따른 보자력의 변화를 조사하였으며, 이 결과를 분석하기 위하여 비정질로 부터의 결정화 거동을 연구하였다. 리본 제조시 급속응고속도가 증가함에 따라 결정화 후의 고유 보자력은 감소하였다. $Nd_{14.73}Fe_{78.67}B_{6.60}$ 비정질은 안정한 $Nd_2Fe_{14}B$ 상으로 결정화하는 과정에서 $\alpha$-Fe와 $Fe_3B$ 상이 생성된다. $Fe_3B$ 상은 $Nd_2Fe_{14}B$ 상이 결정화됨과 동시에 사라지나 $\alpha$-Fe 상은 완전히 결정화된 이후에도 기지상인 $Nd_2Fe_{14}B$ 상과 함께 잔류한다. 열처리된 리본내에 잔류하는 연자성상인 $\alpha$-Fe에 의해 고유 보자력의 특성이 저하하였다.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.129-137
• /
• 2018

The resistance to corrosion of additive manufactured (3D printing) Ti-6Al-4V alloys was investigated using micro-electrochemical tests. In terms of corrosion resistance, the acicular martensitic ${\alpha}^{\prime}$ phase in such additive manufactured Ti-6Al-4V was the focus of attention, and its behavior was distinct from that of conventional subtractive manufactured Ti-6Al-4V. To order to identify ${\alpha}^{\prime}$ phase, XRD tests were performed and micro Vickers hardness was measured for different grains (bright and dark grains) in the additive manufactured Ti-6Al-4V alloy. Micro-electrochemical tests were performed to measure corrosion resistance of bright and dark grains in the additive manufactured Ti-6Al-4V alloy with specially designed electrochemical micro-droplet cell. Critical pitting temperature (CPT) measurement was performed to evaluate the resistance to pitting corrosion of additive manufactured Ti-6Al-4V alloys with different volumes of ${\alpha}^{\prime}$ phase and subtractive manufactured Ti-6Al-4V alloy. The dark grains of the laminated Ti-6Al-4V alloy distributed broader than the bright grains measured with low microhardness. The dark grains of the Ti-6Al-4V alloy, which was rich in martensite ${\alpha}^{\prime}$, had lower general corrosion and pitting resistance than bright grains. As the fraction of martensite ${\alpha}^{\prime}$ phase increased, the resistance to the pitting corrosion decreased.

• 한국분말재료학회지
• /
• 제20권3호
• /
• pp.210-214
• /
• 2013

This manuscript reports on compared color evolution about phase transformation of ${\alpha}-FeOOH@SiO_2$ and ${\beta}-FeOOH@SiO_2$ pigments. Prepared ${\alpha}$-FeOOH and ${\beta}$-FeOOH were coated with silica for enhancing thermal properties and coloration of both samples. To study phase and color of ${\alpha}$-FeOOH and ${\beta}$-FeOOH, we prepared nano sized iron oxide hydroxide pigments which were coated with $SiO_2$ using tetraethylorthosilicate and cetyltrimethyl-ammonium bromide as a surface modifier. The silica-coated both samples were calcined at high temperatures (300, 700 and $1000^{\circ}C$) and characterized by scanning electron microscopy, CIE $L^*a^*b^*$ color parameter measurements, transmission electron microscopy and UV-vis spectroscopy. The yellow ${\alpha}$-FeOOH and ${\beta}$-FeOOH was transformed to ${\alpha}-Fe_2O_3$ with red, brown at 300, $700^{\circ}C$, respectively.

• 한국재료학회지
• /
• 제23권4호
• /
• pp.227-232
• /
• 2013

Al-based alloys have recently attracted considerable interest as structural materials and light weight materials due to their excellent physical and mechanical properties. For the investigation of the potential of Al-based alloys, a surface porous $Al_{88}Cu_6Si_6$ eutectic alloy has been fabricated through a chemical leaching process. The formation and microstructure of the surface porous $Al_{88}Cu_6Si_6$ eutectic alloy have been investigated using X-ray diffraction and scanning electron microscopy. The $Al_{88}Cu_6Si_6$ eutectic alloy is composed of an ${\alpha}$-Al dendrite phase and a single eutectic phase of $Al_2Cu$ and ${\alpha}$-Al. We intended to remove only the ${\alpha}$-Al phase and then the $Al_2Cu$ phase would form a porous structure on the surface with open pores. Both acidic and alkaline aqueous chemical solutions were used with various concentrations to modify the influence on the microstructure and the overall chemical reaction was carried out for 24 hr. A homogeneous open porous structure on the surface was revealed via selective chemical leaching with a $H_2SO_4$ solution. Only the ${\alpha}$-Al phase was successfully leached while the morphology of the $Al_2Cu$ phase was maintained. The pore size was in a range of $1{\sim}5{\mu}m$ and the dealloying depth was nearly $3{\mu}m$. However, under an alkaline NaOH, aqueous solution, an inhomogeneous porous structure on the surface was formed with a 5 wt% NaOH solution and the morphology of the $Al_2Cu$ phase was not preserved. In addition, the sample that was leached by using a 7 wt% NaOH solution crumbled. Al extracted from the Al2Cu phase as ${\alpha}$-Al phase was dealloyed, and increasing concentration of NaOH strongly influenced the morphology of the $Al_2Cu$ phase and sample statement.

• 한국분말재료학회지
• /
• 제6권3호
• /
• pp.246-250
• /
• 1999

The effects of the ${\beta}-Si_3N_4$ starting particle size and $\alpha$/$\beta$ phase transformation during sintering process on the microstructure evolution of Yttrium $\alpha$-Sialon ceramics were investigated. As-received ${\beta}-Si_3N_4$ powder (mean particle size: 0.54$\mu$m) and classified ${\beta}-Si_3N_4$ powder(mean particle size: $0.26\mu{m}$) were used as starting powders. With decreasing the starting particle size, the growth of elongated grains was enhanced, which resulted in the whisker -like microstructure with elongated grains. These results were discussed in relation to the two-dimensional nucleation and growth theory. In the specimen heat treated at $1600^{\circ}C$ for 10h before sintering at $1950^{\circ}C$for 1h under 40atm(2-step sintering), the grain size was smaller than of the 1-step sintering at 195$0^{\circ}C$ for 1h. However, bimodal microstructure evolution were not not remarkable in both sample, which is ascribed to the $\alpha$-phase contents existing in ${\beta}-Si_3N_4$ starting powder.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1159-1164
• /
• 1997

Magnetite(Fe3O4) powders were synthesized through glycothermal reaction by using crystalline $\alpha$-FeOOH as precursor and ethyleanne glycol as solvent. The phase, morphology and particle size of synthesized powders were characterized by XRD and an SEM. When only ethylene glycol was used as solvent, the phase was transformed from $\alpha$-FeOOH to $\alpha$-Fe2O3 and finally Fe3O4 at 27$0^{\circ}C$ for 6hr without morphological change. But by addition of water, Fe3O4 powders were synthesized at 23$0^{\circ}C$ for 3hr through solution-recrystalization process. As the content of water addition increased, the particle shape changed from sphere to octahedron and the partcle size increased. When the excess amount of water added, residual $\alpha$-FeOOH or $\alpha$-Fe2O3 was recrystalized.

• Bulletin of the Korean Chemical Society
• /
• 제19권11호
• /
• pp.1262-1265
• /
• 1998

• 한국연초학회지
• /
• 제13권2호
• /
• pp.27-33
• /
• 1991

Current studies indicated that emphysema in smokers might be due, in part, to the local suppression of G, -protease inhibitor(u, -Pl) in lung by reactive oxygen species in cigarette smoke or smoke-activated lung neutrophiles. In the present works, we examined the possibility that a measure which inactivated $\alpha$l-Pl by cigarette smoke could be an alternative method to evaluate the cigarette quality, In order to determine the inactivation of $\alpha$1, -Pl, trypsin inhibitory capacity(TIC) was assayed. A rapid loss of $\alpha$1, -Pl activity occurred when $\alpha$1-Pl solutions was exposed the gas phase or total particulate matter(TPM) obtained from various brands. The inactivation of $\alpha$1-Pl by gas phase was dependent upon the number of puffs and the age of the smoke. However, that by TPM was rather decreased since 2 puffs and also showed no more change over 24hrs after exposing. Inactivation of $\alpha$1-Pl determined by our suggested method(5 puffs, 24hours of aging after exposing) using various commercial cigarettes exhibited that high tar brands has inactivated it more strongly than low tar cigarettes. But the ability of some brands to inactivate $\alpha$1-Pl does not correlate with the content of tar or nicotine. These results so여esc that the degree of $\alpha$1-Pl inactivation by cigarette smoke may be a useful index for the evaluation of cigarette quality and that it should be also contribute to the manufacture of less hazardous cigarettes.