• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.6
• /
• pp.421-429
• /
• 2003

Purpose : Neoadjuvant chemotherapy is commonly used to treat cancer patients as adjunct treatment, but if the microvascular tissue transfer is performed simulataneously with cancer resection surgery, the induction chemotherapy might affect the survival rate of vascularized free flap. Our study will focus on the effect of induction chemotherapy on the free flaps which were made on white rat abdomen after injection of 5-FU. Materials and Methods: The experimental rat groups were divided into three groups (total 24 rats) as a normal control group, 24 hrs group after 5-FU injection, 3 days group after 5-FU injection. Inferior abdominal island flaps of 8 Sprague Dawley rats on each group were made and immediately were induced into an ischemic state by clamping the supplying inferior epigastric artery and vein with microvascular clamp for a hour to induce a similiar free flap circumstance, then the inferior abdominal skin flaps were reperfused by releasing the clamps. The flaps on abdomen were repositioned and sutured. The experimental data for flap survival rate was collected by digital photo taking, analysed by computer image program to compare with the flap luminosity. The rats were sacrificed at 3 days, 5 days, 7 days after flap preparation and specimens of the flap were taken and stained with H-E staining. The microscopic finding was made under magnification of 200 and 400. Results: 1. Gross findings on each groups showed the healing condition was good as following sequences; normal, 24 hrs group after chemotherapy, 3 days group after chemotherpy. 2. The values of flap luminosity for evaluation of flap survival rate also showed the same sequences as gross findings of healing state. 3. The microscopic findings of epidermis necrosis, inflammation state, dermis fibrosis, vessel change, fatty tissue layer thinning were compared with each group. The 3 days group after chemotherapy showed remarkably poor healing condition compared to other groups. Conclusion: Chemotherapy agents affected the healing process of free flap, but healing condition was recovered spontaneously as post-injection periods passed out. In opposite to our expectation, 3 days group showed the bad flap condition in comparing with 24 hours group which was considered as immatured body circulation state of chemotherapy agent. It showed that 3 weeks in human being after chemotherapy was not proper as timing of microvascular tissue transfer if 3 days group in rat was considered as same healing period of 3 weeks in human being. More delayed healing timing than 3 weeks might be required in clinical application of free tissue transfer.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.856-868
• /
• 2009

This study was conducted to investigate causes for health problems among college women by analyzing factors related to their dietary habits, physical development, health habits, and blood parameters. The subjects were ages 20 to 24 years, lived in the Seoul area and were randomly selected during March, 2008 to August, 2009. The average height and weight of the overall subjects were $162.02{\pm}4.89\;cm$ and $53.96{\pm}7.00\;kg$, respectively. According to a 3-point assessment scale for the subjects' dietary habits, the average point value was 21.2. The percentage of subjects that ate breakfast daily was only 30.5%, and they omitted regular meals at least once a week. Approximately 83.5% of the subjects reported eating out often or frequently, and preferred Korean foods when they ate out. The subjects had interim meals (snacks) one or two times daily, and 40.4% of them preferred unbalanced meals. As their interim meals, among the 'good' group, ate breaded potatoes (39.3%), carbonated beverages, and ice cream (36.8%), whereas the 'poor' group, drank milk and ate dairy products (38.0%) as well as fast food and fried food (22.8%). Intakes of energy, fat, vitamins $B_2$ and $B_6$, niacin, folic acid, calcium, iron, zinc, and phosphorus were higher in the 'poor' group. The average hemoglobin level ($13.77{\pm}1.00\;g/dL$) among the subjects was within normal range; while 2.7% of subjects had hemoglobin levels under 11.1 g/dL (standard value) and were examined as anemic. The degree of interest in health was 24.5% higher among the subjects who had poor dietary habits. In contrast, among those who had good dietary habits, 49.6% reported they had no interest in regular exercise. The subjects reported that regular meals, nutrient intake, sufficient rest, and sleep as necessary to maintain health. The average amount of sleep obtained by the subjects was 6~8 hours. Among the 'poor' group, 36.2% reported that they exercised regularly, whereas 18.5% of the subjects in the 'good' group reported regular exercise (p<0.05). In conclusion, it appears necessary to provide nutrition education through teaching and to promote nutrition and health to college women so they can control their individual health status and create practicable dietary plans.

• Korean Journal of Agricultural Science
• /
• v.15 no.1
• /
• pp.82-94
• /
• 1988

This study was performed to obtain the basic data which can be applied to use of foaming mortars. The results obtained were summarized as follows ; 1. The lowest water-cement ratios were shown at the mixing ratio of 1 : 1. But, it was gradually increased in poorer mixing ratio and decreased in more addition of foaming agent. The water-cement ratios were decreased up to 1.6-53.1% by mix-foaming type and 4.4-24.1% by pre-foamed type than cement mortar. 2. The highest bulk densities were shown at the mixing ratio of 1 : 1. But, it was gradually decreased in poorer mixing ratio and more addition of foaming agent. The decreasing rates of bulk densities were increased in richer mixing ratio and more addition of foaming agent. 3. The bulk densities were decreased up to 38.8-55.9% by mix-foaming type and 9.7-23.6% by pre-foamed type than cement mortar. 4. The lowest absorption rates were shown at the mixing ratio of 1 : 1. But, it was gradually increased in poorer mixing ratio and more addition of foaming agent. The increasing rates of absorption rates were increased in richer mixing ratio and more addition of foaming agent. 5. Absorption rates when immersed in 72hours were shown up to 3.41-5.85 times greater by mix-foaming type and 1.05-1.55 times greater by pre-foamed type than those of cement mortar. it was significantly higher at the early stage of immersed time than cement mortar. 6. The highest strengths were shown at the mixing ratio of 1 : 1. But, it was gradually decreased in poorer mixing ratio and more addition of foaming agent. The decreasing rates of strengths were increased in poorer mixing ratio and more addition of foaming agent. 7. The strengths were decreased up to 77.0-92.8% by mix-foaming type and 36.7-74.4% by pre-foamed type than cement mortar. 8. The lowest air contents were shown at the mixing ratio of 1 : 1. But, it was gradually increased in poorer mixing ratio and more addition of foaming agent. The increasing rates of air contents were increased in richer mixing ratio and more addition of foaming agent. 9. Air contents were shown up to 26.0-63.8 times greater by mix-foaming type and 5.8-17.7 times greater by pre-foamed type than those of cement mortar. 10. The correlations between bulk density, absorption rate, compressive strength and air content were highly significant. The multiple regression equations of bulk density, absorption rate, compressive strength, tensile strength, bending strength and air content were computed depending on a function of mixing ratio and addition of foaming agent. They were generally highly significant.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.227-237
• /
• 2008

Arsenic has recently become of the most serious environmental concerns, and the worldwide regulation of arsenic fur drinking water has been reinforced. Arsenic contaminated groundwater and soil have been frequently revealed as well, and arsenic contamination and its treatment and measures have been domestically raised as one of the most important environmental issues. Arsenic behavior in geo-environment is principally affected by oxides and clay minerals, and particularly iron (oxy)hydroxides have been well known to be most effective in controlling arsenic. Among a number of iron (oxy)hydroxides, for this reason, 2-line ferrihydrite was selected in this study to investigate its effect on arsenic behavior. Adsorption of 2-line ferrihydrite was characterized and compared between As(III) and As(V) which are known to be the most ubiquitous species among arsenic forms in natural environment. Two-line ferrihydrite synthesized in the lab as the adsorbent of arsenic had $10\sim200$ nm for diameter, $247m^{2}/g$ for specific surface area, and 8.2 for pH of zero charge, and those representative properties of 2-line ferrihydrite appeared to be greatly suitable to be used as adsorbent of arsenic. The experimental results on equilibrium adsorption indicate that As(III) showed much stronger adsorption affinity onto 2-line ferrihydrite than As(V). In addition, the maximum adsorptions of As(III) and As(V) were observed at pH 7.0 and 2.0, respectively. In particular, the adsorption of As(III) did not show any difference between pH conditions, except for pH 12.2. On the contrary, the As(V) adsorption was remarkably decreased with increase in pH. The results obtained from the detailed experiments investigating pH effect on arsenic adsorption show that As(III) adsorption increased up to pH 8.0 and dramatically decreased above pH 9.2. In case of As(V), its adsorption steadily decreased with increase in pH. The reason the adsorption characteristics became totally different depending on arsenic species is attributed to the fact that chemical speciation of arsenic and surface charge of 2-line ferrihydrite are significantly affected by pH, and it is speculated that those composite phenomena cause the difference in adsorption between As(III) and As(V). From the view point of adsorption kinetics, adsorption of arsenic species onto 2-line ferrihydrite was investigated to be mostly completed within the duration of 2 hours. Among the kinetic models proposed so for, power function and elovich model were evaluated to be the most suitable ones which can simulate adsorption kinetics of two kinds of arsenic species onto 2-line ferrihydrite.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.2
• /
• pp.79-92
• /
• 1992

This study was carried out to develop new techniques useful for cryopreservation, thawing and artificial insemination, and ultrastructural changes of cryopreserved spermatozoa in rainbow trout(Oncorhynchus mykiss) . Two extenders, such as Tyrode solution and Whittingham's $T_6$ solution, were used to preserve rainbow trout sperm in refrigerator $(-20,\;-40\;and\;-70^{\circ}C)$ or liquid nitrogen $%(-196^{\circ})$. Hand-stripped semen was diluted to 1:16 with two extenders, an then the semen were frozen after mixing semen and each extender containing 1M or 1.5M DMSO solution to 1:1. After 60 days cryopreserved semen was thawed in a $13^{\circ}$ water bath, and subsequently centrifugated. After centrifugation at 1,000 rpm for 5 min thawed semen was washed with extenders, and then fertilized with fresh eggs. The results obtained in these experiments were summarized as follows: After cryopreservation, over 75% of spermatozoa were appeared motile and the survival rate was high. Following cryopreservation by the addition of cryoprotectant such as DMSO, methanol and glycerol, the fertilization rate of the thawed spermatozoa appeared over $99\%$ compared with the control having $99\%$ of fertilization rate. There was no difference between the control and experimental groups such as $(-20^{\circ}C\;-40^{\circ}C\;and\;-70^{\circ}C)$ and $-196^{\circ}$ in fertilization rate. Following cryopreservation at $-196^{\circ}$ by the addition of 1M DMSO of cryoprotectant, each fertilization rate following 24 hours and hatching rate following 24 days showed $96\%$ and $8\%$ by the addition of BSA, but showed $98\%\;and\;10%$ by no addition of BSA. Following 2 months of cryopreservation by the addition of 1M DMSO of cryoprotectant, there were $10%$ of hatching rate at $-196^{\circ}\;and\;10\%\;and\;35\%,\;respectively,\;at\;-40^{\circ}C\;and\;-70^{\circ}C$. Following 2 months of cryopreservation by the addition of 1M methanol of cryoprotectant, there were $22\%$ of fertilization rate at $-20^{\circ}C,\;and\;28\%,\;at\;-70^{\circ}C$ Following 2 months of cryopreservation by the addition of 1M glycerol of cryoprotectant, there were $22\%$ of fertilization rate at $-20^{\circ}C$, and $33\%,\;at\;-70^{\circ}C$. pollowing 2 months of cryopreservation by the addition of 1.5M DMSO of cryoprotectant, there were $27\%$ of fertilization rate at $-20^{\circ}C,\;an\;36\%\;and \;35\%,\;respectively,\;at\;-40^{\circ}C\;and\;-70^{\circ}C$. Following 2 months of cryopreservation by the addition of 1.5M glycerol of cryoprotectant, there were $34\% \;of\;fertilization\;rate\;at\;-20^{\circ}C, \;and\;31\%\;and\;31\%,\;respectively,\;at \;-40^{\circ}C\;and\;-70^{\circ}$. Following 2 months of cryopreservation by the addition of 1.5M methanol of cryoprotectant, there were $28\%$ of fertilization rate at $-20^{\circ}C,\;and\;29\%\;and\;28\%,\;respectively,\;at\;-40^{\circ}C\;and\;-70^{\circ}C.$ From 10 days and 15 days following fertilization at $13^{\circ}C\;and\;10^{\circ}C$, respectively, the mortality rate of fertilized ova was markedly increased. The middle piece of spermatozoa had two set of central doublets, nine set of outer coarse fibres, and mitochondrial sheath. Spermatozoa went through morphological changes during storage, e.g. winding of flagella, detachment of the nuclear envelope and the plasma membrane from the nucleus of the sperm head. There were $1\%$ abnormal spermatozoa in fresh sperm and about $15\%$ during storage.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.248-259
• /
• 2007

The aim of this research was to study the effect of intermittent polymerization on marginal adaptation by comparing the marginal adaptation of intermittently polymerized composite to that of continuously polymerized composite. The materials used for this study were Pyramid (Bisco Inc., Schaumburg, U.S.A.) and Heliomolar (Ivoclar Vivadent, Liechtenstein) . The experiment was carried out in class II MOD cavities prepared in 48 extracted human maxillary premolars. The samples were divided into 4 groups by light curing method: group 1- continuous curing (60s light on with no light off), group 2-intermittent curing (cycles of 3s with 2s light on & 1s light off for 90s); group 3- intermittent curing (cycles of 2s with 1s light on & 1s light off for 120s); group 4- intermittent curing (cycles of 3s with 1s light on & 2s light off for 180s). Consequently the total amount of light energy radiated was same in all the groups. Each specimen went through thermo-mechanical loading (TML) which consisted of mechanical loading (720,000 cycles, 5.0 kg) with a speed of 120 rpm for 100hours and thermocycling (6000 thermocycles of alternating water of $50^{\circ}C$ and $55^{\circ}C$). The continuous margin (CM) (%) of the total margin and regional margins, occlusal enamel (OE), vertical enamel (VE), and cervical enamel (CE) was measured before and after TML under a $\times200$ digital light microscope. Three-way ANOVA and Duncan's Multiple Range Test was performed at 95% level of confidence to test the effect of 3 variables on CM (%) of the total margin: light curing conditions, composite materials and effect of TML. In each group, One-way ANOVA and Duncan's Multiple Range Test was additionally performed to compare CM (%) of regions (OE, VE CE). The results indicated that all the three variables were statistically significant (p < 0.05). Before TML, in groups using Pyramid, groups 3 and 4 showed higher CM (%) than groups 1 and 2, and in groups using Heliomolar. groups 3 and 4 showed higher CM (%) than group 1 (p < 0.05). After TML, in both Pyramid and Heliomo)ar groups, group 3 showed higher CM (%) than group 1 (p < 0.05) CM (%) of the regions are significantly different in each group (p < 0.05). Before TML, no statistical difference was found between groups within the VE and CE region. In the OE region, group 4 of Pyramid showed higher CM (%) than group 2, and groups 2 and 4 of Heliomolar showed higher CM (%) than group 1 (p < 0.05). After TML, no statistical difference was found among groups within the VE and CE region. In the OE region, group 3 of Pyramid showed higher CM (%) than groups 1 and 2, and groups 2,3 and 4 of Heliomolar showed higher CM (%) than group 1 (p < 0.05). It was concluded that intermittent polymerization may be effective in reducing marginal gap formation.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.79-85
• /
• 2023

A novel low-temperature co-fired ceramic (LTCC) dielectric, composed of (1-4x)Bi_1.5Zn_1.0Nb_1.5O₇-3xBi₂Zn_2/3Nb_4/3O₇-2xLiZnNbO₄ (x=0.03-0.21), was synthesized through reactive liquid phase sintering of Bi_1.5Zn_1.0Nb_1.5O₇-xLi₂CO₃ ceramic at temperatures ranging from 850℃ to 920℃ for 4 hours. During sintering, Li₂CO₃ reacted with Bi_1.5Zn_1.0Nb_1.5O₇, resulting in the formation of Bi₂Zn_2/3Nb_4/3O₇, and LiZnNbO₄. The resulting sintered body exhibited a relative sintering density exceeding 96% of the theoretical density. By altering the initial Li₂CO₃ content (x) and consequently modulating the volume fraction of Bi_1.5Zn_1.0Nb_1.5O₇, Bi₂Zn_2/3Nb_4/3O₇, and LiZnNbO₄ in the final sintered body, a sample with high dielectric constant (ε_r), low dielectric loss (tan δ), and the temperature coefficient of dielectric constant (TCε) characterized by NP0 specification (TCε ≤ ±30 ppm/℃) was achieved. As the Li₂CO₃ content increased from x=0.03 mol to x=0.15 mol, the volume fraction of Bi₂Zn_2/3Nb_4/3O₇ and LiZnNbO₄ in the composite increased, while the volume fraction of Bi_1.5Zn_1.0Nb_1.5O₇ decreased. Consequently, the dielectric constant (εr) of the composite materials varied from 148.38 to 126.99, the dielectric loss (tan δ) shifted from 5.29×10^-4 to 3.31×10^-4, and the temperature coefficient of dielectric constant (TCε) transitioned from -340.35 ppm/℃ to 299.67 ppm/℃. A dielectric exhibiting NP0 characteristics was achieved at x=0.09 for Li₂CO₃, with a dielectric constant (ε_r) of 143.06, a dielectric loss (tan δ) value of 4.31×10^-4, and a temperature coefficient of dielectric constant (TCε) value of -9.98 ppm/℃. Chemical compatibility experiment with Ag electrode revealed that the developed composite material exhibited no reactivity with the Ag electrode during the co-firing process.

• Investigative Magnetic Resonance Imaging
• /
• v.8 no.1
• /
• pp.32-41
• /
• 2004

Purpose : To measure the NMR relaxation properties of MnPC, to observe the characteristics of liver enhancement patterns on MR images in experimentally implanted rabbit VX2 tumor model, and to estimate the possibility of tissue specific contrast agent for MnPC in comparison with the hepatobiliary agent. Materials and Methods : Phthalocyanine (PC) was chelated with paramagnetic ions, manganese (Mn). 2.01 g (5.2 mmol) of phthalocyanine was mixed with 0.37 g (1.4 nlmol) of Mn chloride at $310^{\circ}C$ for 36 hours and then purified by chromatography ($CHCl_3:\;CH_3OH=98:2$, volume ratio) to obtain 1.04 g $(46\%)$ of MnPC (molecular weight = 2000 daltons). The T1/T2 relaxivity (R1/R2) for MnPC were determined at a 1.5 T (64 MHz) MR spectrometer. VX2 tumor model was experimentally implanted in the liver parenchyma of rabbits. All MR studies were performed on 1.5 T. The human extremity radio frequency coil of a bird cage type was employed. MR images were acquired at 17 to 24 days after VX2 carcinoma implantation.4 mmol/kg MnPC and 0.01 mmol/kg Mn-DPDP were injected via the ear vein of rabbits. T1-weighted images were obtained with spin-echo (TR/TE=516/14 msec) and fast multiplanar spoiled gradient recalled (TR/TE : 80/4 msec, $60^{\circ}$ flip angle) pulse sequence. Fast spin-echo (TR/TE=1200/85 msec) was used to obtain the T2-weighted images. Results : The value of T1/T2 relaxivity (R1/R2) of MnPC was $7.28\;mM^{-1}S^{-1}$ and $55.56\;mM^{-1}S^{-1}$ respectively at 1.5 T (64 MHz). Because the T2 relaxivity of MnPC that bonded strongly, covalently manganese with phthalocyanine was very high, the signal intensity of liver parenchyma was decreased on postcontrast T2-weighted images and we could easily distinguish the VX2 carcinoma within the liver parenchyma. When MnPC was administrated intravenously, the tumor margin delineation was more remarkable than Mn-DPDP-enhanced images. The enhancement of liver parenchyma with MnPC persisted at relatively high levels over at least one hour after injection of the contrast agents. Conclusion : The hepatic uptake and biliary excretion of MnPC, which are similar to Mn-DPDP, suggest that this agent is a new liver-specific agent. Also, MnPC seems to be used as a dual contrast agent (T1 and T2) with high T2 relaxivity. However, it is warranted that MnPC needs further investigation as a potential contrast agent for MR imaging of the liver. That is, further characterizations of MnPC are needed in vivo and in vitro before clinical trials. The diagnostic potential of MnPC will also have to be examined more in the animal models of additional types.

• The Korean Journal of Pesticide Science
• /
• v.13 no.1
• /
• pp.1-12
• /
• 2009

To assess the effect of butachlor on freshwater aquatic organisms, acute toxicity studies for algae, invertebrate and fishes were conducted. The algae grow inhibition studies were carried out to determine the growth inhibition effects of butachlor (Tech. 93.4%) in Pseudokirchneriella subcapitata (formerly knows as Selenastrum capriconutum), Desmodesmus subspicatus (formerly known as Scendusmus subspicatus), and Chlorella vulgaris during the exposure period of 72 hours. The toxicological responses of P. subcapitata, D. subspicatus, and C. vulgaris to butachlor, expressed in individual $ErC_{50}$ values were 0.002, 0.019, and $10.4mgL^{-1}$, respectively and NOEC values were 0.0008, 0.0016, and $5.34mg\;L^{-1}$, respectively. P. subcapitata was more sensitive than any other algae species. Butachlor has very high toxicity to the algae, such as P. subcapitata and D. subspicatu. In the acute immobilisation test for Daphnia magna, the 24 and $48h-EC_{50}$ values were 2.55 and $1.50mg\;L^{-1}$, respectively. As the results of the acute toxicity test on Cyprinus carpio, Oryzias latipes and Misgurnus anguillicaudatus, the $96h-LC_{50}s$ were 0.62, 0.41 and $0.24mg\;L^{-1}$, respectively. The following ecological risk assessment of butachlor was performed on the basis of the toxicological data of algae, invertebrate and fish and exposure concentrations in rice paddy, drain and river. When a butachlor formulation is applied in rice paddy field according to label recommendation, the measured concentration of butachlor in paddy water was $0.41mg\;L^{-1}$ and the predicted environmental concentration (PEC) of butachlor in drain water was $0.03 mg\;L^{-1}$. Residues of butachlor detected in major rivers between 1997 and 1998 were ranged from $0.0004mg\;L^{-1}$ to $0.0029mg\;L^{-1}$. Toxicity exposure ratios (TERs) of algae in rice paddy, drain and river were 0.004, 0.05 and 0.36, respectively and indicated that butachlor has a risk to algae in rice paddy, drain and river. On the other hand, TERs of invertebrate in rice paddy, drain and river were 3.6, 50 and 357, respectively, well above 2, indicating no risk to invertebrate. TERs of fish in rice paddy, drain and river were 0.58, 8 and 57, respectively. The TERs for fish indicated that butachlor poses a risk to fish in rice paddy but has no risk to fish in agricultural drain and river. In conclusion, butachlor has a minimal risk to algae in agricultural drain and river exposed from rice drainage but has no risk to invertebrate and fish.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.698-707
• /
• 2006

Precise and correct assessment of nutrient intake using appropriate dietary intake method is necessary to improve the nutritional status of the target people group. It is more likely so in elderly people since their dietary habits and inadequate nutrient intakes are of special concern even worse in rural areas. Two popular methods of gathering dietary intake are 24-hour recall and food frequency method (or food frequency questionnaire). In the present study, we conducted both 24-hour recall and food frequency method on 120 rural elderly people $(aged\;65{\sim}74\;years)$, 62 male and 58 female. The dietary intakes were analyzed and the correlation of the dietary intake between 24-hour recall and food frequency method to determine the reliability between two methods. Also each nutrient intake was compared to recommended dietary allowance (RDA) or nutrient reference value (NRV) as appropriate. Even correlation did not show significance between the two methods except for dietary fiber intake (0.65 at p<0.01) and energy-yielding nutrients which mostly showed similar results with nutrient intake level. These support the possible reliability between 24-hours record and food frequency method that is also shown on the cases of most mineral and vitamin intakes. Thus, the food frequency method used in this study for the assessment of nutrient intakes of the elderly people would be reliable for the assessment of the nutrient intake along with the 24-hour recall. Also, the present study results suggested that rural female elderly people would be under optimal nutriture status due to the lower food intake measured by 24-hour recall. The optimal food frequency method would be considered to be developed for the precise nutrient assessment.