• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.130-140
• /
• 2020

This study was conducted in order to closely examine about optimum shading for superior seedling production a container seedling of Tetradium daniellii, which is being increased the demand for a seedling due to being used for alternative energy, ecological restoration and honey plant. The experiment of investigating the optimum shading on T. daniellii was carried out by using plastic container types (350 ml/cavity) for the forestry facility cultivation. The shading level was treated with full sunlight and with 35%, 55%, 75% of the full sunlight. As a result of having surveyed height and root collar diameter growth of a containerized seedling in T. daniellii, a case of the shading experiment showed a noticeably high value was indicated in the full sunlight. It was surveyed that the stronger shading level leads to the lower growth value. Root development was most active in full sunlight. Dry matter production, it was investigated to be the highest in full sunlight. It was surveyed to be the similar tendency to the outcome of height and root collar diameter growth. QI, which is index of showing the quality of a seedling, stood at 0.98 in full sunlight, thereby having been investigated to be the highest. As for the chlorophyll content in a seedling, the highest chlorophyll content was indicated in the 75% shading treatment with the relatively highest shading level. The photosynthetic rate and the water use efficiency were surveyed to be the highest in full sunlight with 8.48 μmolCO₂·m^-2s^-1, 1.40 μmolCO₂·mmolm^-1H₂O, respectively. As a result of surveying the whole experiment, optimum shading level for superior seedling production a container seedling of T. daniellii is determined in full sunlight (0%). It is expected that this will be used as a basic data for mass production.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.202-209
• /
• 2004

Flat panel based digital radiography (DR) systems have recently become useful and important in the field of diagnostic radiology. For DRs with amorphous silicon photosensors, CsI(TI) is normally used as the scintillator, which produces visible light corresponding to the absorbed radiation energy. The visible light photons are converted into electric signal in the amorphous silicon photodiodes which constitute a two dimensional array. In order to produce good quality images, detailed behaviors of DR detectors to radiation must be studied. The relationship between air exposure and the DR outputs has been investigated in many studies. But this relationship was investigated under the condition of the fixed tube voltage. In this study, we investigated the relationship between the DR outputs and X-ray in terms of the absorbed energy in the detector rather than the air exposure using SPEC-l8, an X-ray energy spectrum model. Measured exposure was compared with calculated exposure for obtaining the inherent filtration that is a important input variable of SPEC-l8. The absorbed energy in the detector was calculated using algorithm of calculating the absorbed energy in the material and pixel values of real images under various conditions was obtained. The characteristic curve was obtained using the relationship of two parameter and the results were verified using phantoms made of water and aluminum. The pixel values of the phantom image were estimated and compared with the characteristic curve under various conditions. It was found that the relationship between the DR outputs and the absorbed energy in the detector was almost linear. In a experiment using the phantoms, the estimated pixel values agreed with the characteristic curve, although the effect of scattered photons introduced some errors. However, effect of a scattered X-ray must be studied because it was not included in the calculation algorithm. The result of this study can provide useful information about a pre-processing of digital radiography.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.315-322
• /
• 2013

The aim of this work is to verify the self-quality assurances in medical institutions in Korea through the external audits by the group of experts and have a mutual discussion of the systematic problems. In order to validate the external audits 30 of 80 medical institutions across the nation were picked out considering the regional distribution and the final 25 institutions applied voluntarily to take part in this work. The basic rules were setup that any information of the participants be kept secrete and the measurements be performed with the dosimetry system already verified through intercomparision. The outputs for 2 or more photon beams, the accuracy of gantry rotation and collimator rotation and the poistional accuracy of MLC movement were measured. The findings for the output measurement showed the differences of -0.8%~4.5%, -0.79%~3.01%, and -0.7%~0.07% with respect to that of the verified dosimetry system for the 6MV, 10MV, and 15MV, respectively. For the reference absorbed dose 8 (16%) of 50 photon beams in 25 medical institutions differed 2.0% or greater from the reference value. The coincidences of Field size with x-ray beam and radiation isocenters of Gantry roration and collimator rotation gave the results of within ${\pm}2$ mm for every institute except 2 institutions. The positional accuracy of MLC movement agreed to within ${\pm}1$ mm for every institute. For the beam qualities of 6 MV photon beams kQ values showed the distribution within 0.4% between maximum and minimum. For the protocols 21 institutions (84%) used absorbed dose to water based protocol while 4 insitutions (16%) used air kerma based one. 22 institutions employed the SSD technique while 3 institutions did the SAD one. External audit plays an important role in discovering the systematic problems of self-performing Quality Assurances and having in depth discussion for mutual complementation. Training experts of international level as well as national support system are required so that both the group of experts of medical physicists and government laboratory could perform together periodical and constant external audits.

• Progress in Medical Physics
• /
• v.24 no.4
• /
• pp.237-242
• /
• 2013

In the intracranial regions, an accurate delineation of the target volume has been difficult with only the CT data due to poor soft tissue contrast of CT images. Therefore, the magnetic resonance images (MRI) for the delineation of the target volumes were widely used. To calculate dose distributions with MRI-based RTP, the electron density (ED) mapping concept from the diagnostic CT images and the pseudo CT concept from the MRI were introduced. In this study, the look up table (LUT) from the fifteen patients' diagnostic brain MRI images was created to verify the feasibility of MRI-based RTP. The dose distributions from the MRI-based calculations were compared to the original CT-based calculation. One MRI set has ED information from LUT (lMRI). Another set was generated with voxel values assigned with a homogeneous density of water (wMRI). A simple plan with a single anterior 6MV one portal was applied to the CT, lMRI, and wMRI. Depending on the patient's target geometry for the 3D conformal plan, 6MV photon beams and from two to five gantry portals were used. The differences of the dose distribution and DVH between the lMRI based and CT-based plan were smaller than the wMRI-based plan. The dose difference of wMRI vs. lMRI was measured as 91 cGy vs. 57 cGy at maximum dose, 74 cGt vs. 42 cGy at mean dose, and 94 cGy vs. 53 at minimum dose. The differences of maximum dose, minimum dose, and mean dose of the wMRI-based plan were lower than the lMRI-based plan, because the air cavity was not calculated in the wMRI-based plan. These results prove the feasibility of the lMRI-based planning for brain tumor radiation therapy.

• The Journal of Natural Sciences
• /
• v.14 no.1
• /
• pp.63-81
• /
• 2004

It is the purpose of this study to arrange in ornamental trees and shrubs the planting that leads to an appropriate type of templescape. The study was designed primarily as an examples for each Buddhist temple which desires further decoration with several ornamental plants, doubles the effectiveness of the Sen-Buddhist meditation, and boosts tourists' attraction. To investigate the planting status and type of trees and shrubs in the precincts of Buddhism temples, We close three temples : They are Nagsansa, Boolgoogsa and Booseugsa, which are intermonatane area temples all together. The results investigated were summarized as follows :1. Planting status and pattern in temples Open spaces of the Daewoogjeon in all temples, a main Sanctuaries in temple buildings, where Buddha is enshrined in, we could not find any kind of trees of shrubs to be planted.Muryangsujeon, a symbol of "Future", which can be also found at Boosugsa temple, is living in Western Elysium world and takes mercy on mankind of this life. Taxus cuspidata was planted at this Muryangsujeon, known as an immeasurable bliss building, where an Amitabha is enshrined in.Total 25 species of trees and shrubs were planted around Birozani building of Buddhist temples, Birozani is enshrined at the Birojion of Boollgoogsa temple.The buddhist Goddess of Mercy which is a buddhist saint for pursuit of fortune and blessing to relieve the mankind is enshrined at Wonchonjeon, Daebijeon and Kwaneumjeon which are able to observe at both Boolgoogsa and Nagsnsa temples, where Euonymus japonicus trees including other 26 species could be found in common at both temples.2. Correlation between trees/shrubs and temple buildingsTrees and flowers symbolizing Buddha are often planted as material sources of gardening to decorate : They are Logerstroemia indica as Buddha's flower, Viburmum opulus var. calvescens resembling Buddha's head, Tilia mandshurica producing the beads of rosary, Gardenia jaminoides Ellis with white flower blade and flower of bliss, not flower to this day and Lotus flowering clearly in the pond filling with dirty water which is able to clarifies the world full of crime, infidelity and injustification. Among these Buddhist' plants, however, Logerstroemia indica could be found in all three temples, and Viburmum opulus var. calvescens at both Nagsansa and Boosugsa. Also, Lager stroemia indica was planted at all three temples and Viburmum opulus var. calvescens at both temples of Nagsansa and Boosugsa. Tilia mandshurica and Gardenia jasminoides Ellis were not found in any temples which might become the subject of investigation.In relation of the buildings of each temples as a sanctified space, the planting of trees and shrubs was not considered for the arrangement, templescape architecture or species. And, also, we could not find in the study any special relationship of trees/ shrubs with the characteristics of temples.With the results obtained through precise studies we presented here in this paper newly designed model of templescape in intermane buddhist temple which can be applied for planting and arrangement of trees or/and shrubs. Basic principles of model in mind are:To consider the correlation of the dominant between plants and temple buildings.To plant trees/shrubs for special functions as well as conditions of temple location.To make tree arrangement correlating to Buddhism spirit.To induce environment friendly plants to be planted, suitable to regional conditions.This redecorated model of templescape might be used as a canon of the tree planting and arrangement in the precincts of Buddhism temples.

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.122-127
• /
• 2009

This study was to separate wild yeast from the Houttuynia Cordata Thunb(HC) extracts fermented in traditional way and investigate the characteristics of fermentation from the HC extracts. As a result, the longer the cultivation time, the more the contents of alcohol in $15^{\circ}Brix$ sugar solutions increased. When it reached to 90 hours since it cultivated, it ranked HCE 12%, HCD 11.2%, and HCA 10.5% in order. As for HCF, HCG, HCB, and HCC), this study has shown that the contents of alcohol were from 7.5% through 8.5%. As a result of selecting germ strains like HCE and HCD with the highest alcohol-genicity in the sugar solutions as separated yeast from HC and of comparing and reviewing the existing Saccharomyces germ strains and fermentation power in the medium of HC(Juice extraction of HC : Distilled water(1:1), this study has found out that 'pH' decreased from $4.09{\sim}4.12$ before fermentation through $3.57{\sim}3.78$ after fermentation. And, the sugar concentration decreased from $15.00{\sim}15.19^{\circ}Brix$ through $7.75{\sim}9.57^{\circ}Brix$ before fermentation. Also, the acid value increased from $0.138{\sim}0.210%$ before fermentation through $0.282{\sim}0.45%$ after fermentation. In addition, as the contents of alcohol became $3.6{\sim}4.6%$ after fermentation, isolates HCD and HCE from HC had higher value rather than ones of DJ97, YJK, R12, and RCY separated from persimmons, apples, and grapes. The result value of color was minimum $4.75{\pm}1.44$ and maximum $6.85{\pm}1.63$, and HCE marked the highest record among the items of sensory evaluation. The overall acceptability was in normal level like minimum $3.95{\pm}1.17$ and maximum $5.00{\pm}1.41$. It is considered as it could lower sensory evaluation because the acceptability of flavor was not satisfied. After all, the significance(p<0.05) among the germ strains was not recognized in aspects of color, flagrance, flavor, and overall acceptability.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.461-468
• /
• 2008

To obtain basic da1a on the preparation of Cudrania tricuspidata leaves tea, the quality and anti-oxidative characteristics of dried raw leaves (RT), pan-fired leaves tea (PT) and fermented leaves tea (FT) were investigated. General characteristics of RT, PT and FT, respectively, were: moisture content 18.47, 6.23 and 8.50%; crude protein content 17.77, 20.46 and 19.13%; and carbohydrate content 54.42, 62.52 and 61.96%. The crude lipid and ash contents were in the range 0.05 - 0.07% and 9.27 -10.74% respectively; the water soluble solid content was in the order FT > PT > RT and ranged from 23.10 - 37.38%; there were no significant differences in the total polyphenol content (815.24 - 835.16 mg%). Although $L^*$ values of PT (20.94) and FT (20.85) were lower than those of RT (34.71), the $a^*$ value in PT and the $b^*$ value in FT were highest. In all ethanol extracts the reducing power, electron-donating ability and superoxide dismutase (SOD)-like activity increased in a concentration-dependent manner. Furthermore, the activity in FT was higher than in PT or RT. The total free amino-acid content was higher in FT (1429.93 mg%) than RT (1108.94 mg%) or PT (833.13 mg%). The major amino acids were L-asparagine and L-valine in RT, L-cysteine and L-glutamic acid in PT and L-proline in FT. In a sensory evaluation of PT and FT, bitter and astringent tastes were decreased relative to RT, while sweet and savory tastes, flavor, color and overall acceptability were increased. These results indicate that FT bas a higher antioxidant effect and free-amino-acid content than PT, while the sensory quality of FT is similar to that of PT.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.605-613
• /
• 2016

The quality and shelf life of sliced root of Platycodon grandiflorum (Doraji) treated by ozon-microbubble-heat shock (OMH) were investigated by combining modified-atmosphere packaging [MAP, ($50%O_2+15%CO_2+35%N_2$)]. The study was based on microbiological (total viable bacteria, fungi, Enterobacteriaceae and coliforms numbers), physicochemical and sensory changes. OMH treatment was effective in reducing microbial populations of the sliced Doraji, especially Enterobacteriaceae and coliforms reduced by 2 log CFU/g. However OMH-MAP treatment remained the aerobe and fungi numbers. Regarding the color, OMH-MAP delayed the change of Hunter $b^*$ and the sliced Doraji by OMH-MAP treatment exhibited lower decrease of flavor and overall acceptability compared to those by polypropylene packaging after tap water treatment (Control). The OMH and $50%O_2+15%CO_2$ MAP treatment gave better sensory quality and extended shelf-life for sliced Doraji (~3 days longer shelf-life than Control). Flavor was significantly related to overall acceptability at both Control and OMH-MAP, whereas total coliforms prevalence was associated with overall acceptability at only OMH-MAP. Therefore microbubble-heat shock treatment may improve microbial safety and sliced Doraji by OMH treatment can stored under $50%O_2+15%CO_2$ treatment for up to 7 days. Thus, OMH and MAP treatment may be used in maintaining the storage quality and marketability of sliced Doraji.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.223-229
• /
• 2006

The objectives of this study was to investigate the amount of tooth ablation and the change of intrapulpal temperature by Er:YAG laser as it relates to pulse energy and pulse repetition rate at the identical power and, thereby, to reveal which of the two parameters strongly relates with ablation efficiency and intrapulpal temperature. Extracted healthy human molar teeth were sectioned into two pieces and each specimen was irradiated within the combination of pulse energy and pulse repetition time at the same power of 3W; $300mJy{\times}10Hz$ group, $200mJy{\times}15Hz$ group, and $150mJy{\times}20Hz$ group. Each specimen comprised ten tooth specimens. A laser beam with conjunction of a water flow rate of 1.6 ml/min was applied over enamel surfaces of the specimens during 3 seconds and the ablation amount was determined by difference in weight before and after irradiation. To investigate the temperature change in the pulp according to the above groups, another five extracted healthy human molar teeth were prepared. Each tooth was embedded into resin block and the temperature-measuring probes were kept on the irradiated and the opposite walls in the dental pulp during lasing. When the power was kept constant at 3W, ablation amount increased with pulse energy rather than pulse repetition rate (p=0.000). Although intrapulpal temperature increased with pulse repetition rate, there were no significant differences among the groups and between the irradiated and the opposite pulpal walls, except at a condition of $150y{\times}20Hz$ (p=0.033). Conclusively, it is suggested that ablation efficacy is influenced by pulse energy rather than pulse repetition rate.

• Journal of Forest and Environmental Science
• /
• v.21 no.1
• /
• pp.83-91
• /
• 2005

This research was carried out to elucidate the photosnthesis, respiration, and intercellullar $CO_2$ concentration of Kalopanax pictus leaves. The results obtained are summarized as follows; 1. The light compensation points in leaves of Kalopanax pictus seedlings were in the following order; the upper ($34{\mu}mol\;m^{-2}s^{-1}$) middle ($29{\mu}mol\;m^{-2}s^{-1}$) lower leaves ($24{\mu}mol\;m^{-2}s^{-1}$). The light saturated points were at $800{\sim}1200{\mu}mol\;m^{-2}s^{-1}$ in the upper leaves and $400{\mu}mol\;m^{-2}s^{-1}$ in the middle and lower leaves. At the light saturated points, the net photosynthesis rate was in the following order; the upper ($11.1{\mu}mol\;CO_2\;m^{-2}s^{-1}$) middle ($5.15{\mu}mol\;CO_2\;m^{-2}s^{-1}$) lower leaves ($4.01{\mu}mol\;CO_2\;m^{-2}s^{-1}$). The light use efficiency was in the following order; the upper ($0.041{\mu}mol\;CO_2\;{\mu}mol^{-1}$) middle ($0.040{\mu}mol\;CO_2\;{\mu}mol^{-1}$) lower leaves ($0.039{\mu}mol\;CO_2\;{\mu}mol^{-1}$). 2. In the upper leaves of Kalopanax pictus seedlings, the stomatal conductance increased continuously with increasing light intensity. In the middle and lower leaves, it was saturated at $400{\mu}mol\;m^{-2}s^{-1}$. 3. In the upper, middle and lower leaves of Kalopanax pictus seedlings, the intercellular $CO_2$ concentration/the atmospheric $CO_2$ concentration ($C_i/C_a$) ratio rapidly decreased to $600{\mu}mol\;m^{-2}s^{-1}$, and then showed a constant values. 4. In the upper leaves of Kalopanax pictus seedlings, the photorespiration rate was $3.34{\mu}mol\;CO_2\;m^{-2}s^{-1}$ and $CO_2$ compensation point was $48.7{\mu}mol\;mol^{-1}$. Dark respiration rate increased exponentially with increasing leaf temperature, and the photorespiration rate was 2.4 times higher than dark respiration rate.