Proceedings of the Safety Management and Science Conference (대한안전경영과학회:학술대회논문집)
Korea Safety Management & Science
- Semi Annual
Domain
- Construction/Transportation > Infra-structure Inspection/Evaluation
2013.04a
-
Slips and falls are associated with many occupational injuries in Korea. It is also estimated that slipping are major contributors to slip, trip and fall injury burden. So "LOCAL RULE ON OCCUPATIONAL SAFETY AND HEALTH STANDAR D" must be improved, especially article 3(prevention of slip, trip and fall). The primary purpose of the present study is to determine if, and to what extent, the standard could be improved in present environment. In order to fulfill our objective, the another regulation in Korea and foreign countries were investigated and reviewed. Many kind of standard, mandatory documents and guideline were also reviewed. And then, regulations, standard, guideline etc. reviewed were compared with each others. The article 3 was revised as below. 1. The floors of the traffic route in workplace shall have no hole or slope, or be uneven or slippery so as, in each case, to expose employees to slip, trip and fall risk, except if adequate measures have been taken to prevent a employees falling. 2. The employer shall design, install and fix the drain for effective drainage if fluid contaminants were frequently occurred. So far as is reasonably practicable, An employer shall keep the workplace clean, sanitary, and dry so that employees won't have any risk to tripping or slipping at the workplace. 3. To facilitate cleaning, every floor, workplace, and passageway shall be, so far as is reasonably practicable, kept free from protruding objects, splinters, holes, etc. Also, some criteria was developed in this study. Standard and criteria developed in this study will help to prevent slip, trip, and fall injuries.
-
Forklift truck is one of the dangerous machines which causes the fatal accidents most frequently. The causes of fatalities by forklift from 2008 to 2011 were analyzed. Crushing the operator when tipping over or falling off a truck were the major causes of death in this study. The purpose of this study is to show measures from the engineering point of view to prevent the forklift truck accidents. In order for that, the domestic requirement for forklift safety was compared with those of foreign and international standards. The manufacturers' opinion was also collected regarding to improve the forklift safety. Several measures were suggested in order to prevent fatalities caused by forklift.
-
It can be said that nowadays, customers don't recognize that only good quality products as selection attribute regarding products quality can satisfy them. The case in service industries is also the same. Service quality is most affected by the criteria that customers themselves evaluate. Customers who are not satisfied with services provided institutions will disregard them. In consequence, this will affect their profitability. Collected questionnaires were analyzed using SPSS v.15 for the concrete proof analysis and the results are as follows. First, Service quality works as an important factors on customer's behavior. Second, Relationship quality serves as a mediated role between service quality and customer's behavior.
-
Jeong, Ji-Yun;Hwang, Dae-Seong;Lee, Hae-Uk;Go, Jun-Cheol;Choe, Chang-Geun;Yu, Mi-Jeong;Kim, Ju-Hyeon;Mun, In-Ju;Nam, A-Ra;Gang, Gyeong-Sik 83
-
In this Paper, We study on establish for unit of measure. Quality means abstract for customer needs. we surveyed unit of measurement of quality feature of Juran, Taguchi, 6 sigma method. We suggest unit of measurement of quality feature. Each enterprise can use defining own unit of measurement of quality feature. Effect is expected in enterprise that these proposals do quality control. There is meaning in direction that measuring mean of quality feature that propose in this treatise understands actuality to be deeply and reconcile exact point of theory.
-
공급사슬관리(Supply Chain Management)의 목적은 공급사슬에서 발생하는 재고 및 운송에 관련한 비용을 최소화하는 것이다. 여기서 발생하는 비용은 여러 변수에 의해 결정되기 때문에 공급망 전체를 하나의 시스템으로 보고 모델링하여 분석할 필요성이 있다. 여러 구성요소들을 시간의 흐름에 따라 변화하는 모습을 분석하기 위해 수학적 접근방법을 사용하는 것 보다 시뮬레이션 방법을 사용해 모델링하는 것이 더 효과적이다. 따라서 본 연구에서는 중국의 H자동차의 조달물류의 문제점을 파악하고 이를 개선하기 위한 방안을 마련하기 위해 시뮬레이션 방법을 활용하여 조달물류의 최적 배송주기를 도출하고, 재고관리의 문제점을 개선 하고자 한다.
-
제주도 내 관광객수는 최근 5년간 꾸준히 증가했으며 2012년 12월을 기준으로 960만명을 돌파하였다. 서비스업의 전체 사업장 및 근로자 역시 최근 5년간 증가하였으며 서비스업 종사자의 경우 전체 근로자 173,996명의 47%를 차지하고 있다. 업무상질병자 중 근골격계질환자 수는 전체의 90%를 차지하고 있으며(2012년 12월 기준) 근로자의 신규유입이 적고 노령근로자가 많은 점을 감안하였을 때 업무상 질병 발생율은 향후 증가할 것으로 예상된다. 본 연구는 제주도 내 관광객 수 증가에 따른 서비스업 종사자의 근골격계질환 발생현황 분석으로 향후 제주도 내 발생되는 근골격계질환의 예방에 기여하고자 한다.
-
산업기술의 비약적인 발전으로 인해 오늘날 우리가 개발하거나 사용하는 시스템은 보다 기술의 고도화 양상을 보이고 있다. 따라서, 기존의 시스템이 지니고 있어 제공하는 단일 특성에서 벗어나 다양한 학제간 결합된 기술로 기존 시스템이 지니고 있는 관념적인 기능에서 벗어나 다기능을 제공하고 있다. 이로 인해, 기존의 개발단계에서는 보다 높은 설계 신뢰성이 요구되고 있다. 특히, 오늘날 우리사회는 시스템의 개발 성공이라는 안도에서 벗어나 시스템 운용 유지단계에서도 안전성 측면에서 매우 중요성을 인식하고 대비하고 있다. 따라서, 국내에서는 미흡한 상위 단계에서의 설계활동과 또한, 같은 시스템 수명주기 상에서의 시스템 안전활동을 동시에 고려한 동시공학적인 접근에 관한 연구를 본 연구팀은 지속적으로 수행해왔다. 따라서, 기존의 연구결과인 설계와 안전을 동시에 고려한 통합 설계 프로세스 모델에 대해, 시스템개발에 관련한 모든 이해당사자가 공통된 이해를 바탕으로 시스템설계와 안전 활동에 대해 상호 호완성과 공통된 인식을 갖고 접근할 수 있는 방안을 본 연구를 통해 수행하였다. 따라서, 본 연구는 모델기반 시스템공학 기법중 보편적인 언어인 공통 언어를 통해 기존 연구를 통해 제시한 통합설계 프로세스 모델을 구현에 관한 연구 수행을 통한 접근 방안에 관하여 논의하고 있다. 본 연구를 기반으로 향후 추가 연구를 수행한다면, 국내 대형복합시스템의 설계단계에서의 안전성을 동시 고려한 시스템 설계 신뢰성 확보를 위해 도움이 될 것으로 기대 된다.
-
-
Recently in the construction business construction companies has been ordered to survive in the terriblly competitive environment. Aa a result, most of the project with low-priced contract needs a speedy progress during all construction period. For the last five years major incident frequently occurs and results in the death of 189 workers at major top 6 construction builders. In most recent 10 years, the cause of major incidents happened in construction company is the speedy construction work that is affecting on the safety management. To prevent these accidents in the speedy construction work, four factors were chosed and analysed such as the personnel/organization, the working budget, the subcontractor selection and the employee motivation. The head office taked the support plan and tested it at the pilot work site. It showed a reduced accident and the harmful factors can be eliminated. It should be able to apply to the field to secure safety and prevent accidents.
-
As people make efforts on accident prevention, the number of accidents is decreasing, fatal major industry accidents are rather than increasing so that the number of deaths has not decreased. Under these conditions, there is an attempt to introduce and perform the safety vacational education system as a means for keeping from major industry accidents. Therefore, in this paper, we analysis vacational education of manufacturing industry in safety point of view and suggest the technique efficiently measuring and managing each safety management. Proposed the technique shows that the specification on safety determines weight through the managers of firms and each process is suggested by using SN Ratio.
-
최근 현대 무기체계는 최첨단 기술로 인한 무기체계 개발 속도 증가와 획득환경의 다변화와 더불어 이에 대한 위험도 동시에 증가하고 있다. 이에 따라 미국방부는 무기체계의 수명주기를 고려하여 시험평가를 지속 적용토록 강조하고 있다. 따라서 기존의 무기체계 시험평가 프로세스에서 다루는 시스템 설계에 대한 단계별 안전 활동의 강화의 필요성 역시 강조되고 있다. 그 중에서도 무기체계 개발의 핵심 활동에 해당하는 체계개발 단계는 양산에 들어가기 전의 최종 활동으로서 제대로 수행되어야만 초기에 의도한 무기체계 개발의 목적을 달성할 수 있을 것이다. 본 논문에서는 시스템 안전성 요소를 고려한 시험평가 프로세스의 개선사항 도출과 모델링을 통해 무기체계 시스템인 무기체계를 대상으로 적용 및 조정 구축에 대한 내용을 기술하고 있다. 본 연구의 결과를 토대로 향후 시험평가 기간의 단축 및 비용 절감과 데이터의 관리 및 추적 기능을 개선함으로써 무기체계 개발 후의 안전사고 발생 가능성을 줄일 수 있을 것으로 기대된다.
-
오늘날 기술의 발전으로 시스템들은 점차 대형화 복잡화 되어가고 있다. 이처럼 점차 대형화 복잡화 되어가고 있는 시스템들은 더욱 커진 사고 및 고장에 대한 위험을 내재하게 된다. 또한 대형 복합 시스템에서 발생하는 사고 및 고장은 바로 큰 재산피해나 인명피해와 직결 될 수 있다. 따라서 체계적인 안전관리의 필요성이 점차 커지고 있다. 이에 대응하여 철도, 항공, 해양 등의 산업에서는 각 산업에 적합한 안전관리체계를 수립하려 노력하고 있으며, 표준 및 매뉴얼을 제정하여 보급에 앞장서고 있다. 국내 철도산업에서도 철도안전법의 재정을 기점을 철도 산업전반에 걸쳐 많은 환경변화가 이뤄지고 있고 이에 대응하기 위해 철도 안전시스템을 바탕으로 한 안전관리체계를 구축하였다. 한편 다양한 운영체계를 갖고 있는 철도시설 및 운영기관이 존재하는 국가 철도 안전관리체계의 안전규제를 체계화하기 위해서는 체계적인 요구사항의 분석에 따른 시스템 아키텍처의 설정이 요구되고 있다. 이러한 아키텍처의 설정은 현재에 대한 분석과 미래의 철도안전시스템의 특성을 구조화하여 향후 비전을 프레임워크로 표현함으로서 구현이 가능해진다. 본 논문에서는 현재의 안전관리체계의 도입 배경 및 도입 현황에 대해서 분석하고, 안전관리의 방식의 변화에 적절히 대응하는 안전관리체계의 구축을 위해 안전관리체계에 대한 아키텍처를 구현하고자 하며 이때, 모델링을 바탕으로 한 접근을 제시한다.
-
어린이 가구는 어른 가구의 축소가 아닌 새로운 제품 분야이다. 이미 많은 업체에서 어린이 가구를 출시하는데 대체적으로 안전성을 이유로 고가의 제품이다. 지금 사회의 가구 구성의 다양화로 인한 어린이가구가 한 제품의 분야가 되었기 때문이다. 이에 어린이 가구에 대한 안전성이 높아졌으며 실용성과 안전성을 최우선으로 하고 있다. 이는 어린이들이 가구를 놀이용으로 신체적 접촉을 하고 있기 때문이다. 가구의 특징으로 어린이들의 피부에 접촉이 잦고 가구의 재질에 따른 촉감 등에 반응할 수 있기 때문이다. 이는 어린이가 어린이가구에 부딪히는 느낌, 이용성, 재미와도 연결되어 감성을 키울 수 있다고 본다. 어린이들은 표현성이 미흡하기 때문에 어린이가구의 안전성에 보다 더 주의해야한다고 여긴다. 즉 어린이가구의 안전성을 추구는 실제적 구매욕구를 가지고 있는 소비자인 부모들의 인식에 변화가 필요하가다. 어린이 가구의 시장은 중국이나 동남아에서 제조되어 한국으로 들어오는 경우가 있다. 그러므로 안전성에 대한 인식을 위해 재질과 실용성을 가미한 어린이 가구가 필요하다.
-
This study compared the disasters in construction field under construction amount of 300,000,000 won and the whole construction fields in order to improve the efficacy of various industrial safety and health policies and services and examined the characteristics of disasters in construction field under 300,000,000 won. It also examined, compared and analyzed the characteristics of disaster in construction field under construction amount of 300,000,000 won that disaster prevention technical experts saw. The subjects of comparison were selected with statistical data of disaster for 2011 and those of disaster in construction field under construction amount of 300,000,000 won from January to August of 2012. And questionnaire was conducted with technical instruction experts of small-sized construction field and priority was drawn, compared and analyzed with AHP. Consequently, the results of different views between actual disaster data and experts' views were obtained. Therefore, this study suggested the characteristics of disaster in construction field under construction amount of 300,000,000 won and presented the methods for improving disaster prevention technical experts.
-
실리콘 기반의 반도체 산업은 Moore Rule에 따른 집적도 향상에 힘입어 눈부시게 발전해 왔다. 그러나, 최근 최소 선 폭 수준이 10nm에 다다르면서 공정의 난이도는 한계에 다다랐으며, 한계를 극복하기 위해서는 폭발적인 비용 투입만으로도 확신할 수 없기 때문에 선 폭 미세화 (Scaling Down)를 통한 집적도 향상은 더 이상 비용/성능 측면에 효율적이지 못하다. 이러한 상황으로 인해 반도체 업체들은 한계를 극복하기 위한 여러 가지 방법을 강구하고 있는 실정이다. 이러한 (개발 난이도 증가, 소형화, 경량화, 고집적화에 대한 고객 요구 증대) 한계를 해결하기 위하여, 크게 3가지 관점에서 지속적으로 연구가 이루어 지고 있다. 여기서는 현재 가장 활발한 연구가 이루어지고 있으며, 가장 대응이 용이한 PKG 신기술 개발에 대하여 다루고자 한다.
-
의료서비스산업은 인구 고령화, 소득 증대, 건강보험의 보장성 강화 등으로 시장이 급속히 확대되는 추세이다. 의료서비스산업의 대다수를 차지하는 것은 병원으로, 병원은 의사, 의료기사, 간호사, 행정직 등 전문적이고 다양한 직종의 종사자들의 협동작업을 통해 환자들에게 의료서비스를 제공하는 조직이다. 간호사는 많은 직무를 담당하고 있는 다양한 전문 인력 중에서 병원인력의 40%를 차지하고 있으며, 환자에게 제공되는 대부분의 서비스인 치료와 간호업무를 담당하고 있다. 병원인력의 다수를 차지하고 있는 간호사의 잦은 이직과 낮은 생산성은 환자의 치료와 간호업무에 지장을 줄 수 있는데, 소진과 직무스트레스가 간호사의 이직과 생산성에 영향을 주는 것으로 나타나고 있다. 이에 본 연구는 간호사의 일반적 특성에 따른 소진과 직무스트레스의 차이를 연구하여, 간호사 개인 맞춤별 내부마케팅 자료로 활용하고자 한다. 간호사의 일반적 특성에 따른 소진과 직무스트레스의 차이는 첫째, 소진에 차이가 있는 일반적 특성으로는 연령, 결혼, 근무형태, 직위, 간호사 경력, 근무처, 병상 수로 나타났으며, 둘째, 직무스트레스에 차이가 있는 일반적 특성으로는 연령, 학력, 결혼, 근무형태, 간호사 경력, 근무처, 병상 수로 나타났다.
-
Many manufacturing industries need more efficient organization since the customer expects a greater response to orders Due to this increased expectation, a supply chain management (SCM) has become one of the most important methods of competitive advantage in business today. This study has developed a simulator for the supply chain management problem. The simulator designed to help determine considering to the capacities and the costs of production and distribution facilities. The simulator developed using commercial simulation tool ARENA and the results of computational experiments for a simple example were given and discussed to validate the developed simulator. The simulator can be used to decide an realistic production-distribution planning in the area.
-
본 연구에서는 인천광역시의 37개 사업장(공장)을 대상으로 작업현장의 소음을 측정 및 분석하여 소음이 화재경보음 인지에 미치는 영향을 분석하였다. 측정결과 평균소음이 95.8dB(A)나왔다. 이는 국내 경보장치 음량기준(화재경보음 발생장치에서 1m떨어진 곳에서 90dB이상)보다 5.8dB(A)높게 나왔다. 미국방화협회(NFPA)에 따르면 암소음(기기음)이 85dB(A)이거나 이상일 경우 화재경보음 인지정도가 미흡하기 때문에 다른 방법을 강구하도록 되어 있다. 또한 화재경보음은 암소음보다 15dB(A) 높아야 한다고 하고 있다. 따라서 주변의 환경을 무시한 획일적인 화재경보음 설계에 대해서 제도적 및 법적 개선이 필요하다고 사료된다.
-
-
According to Department of labor guideline "2012-104 (2012.9.26.)" This study is to suggest the basic information and the improvement for the application of risk assessment on a construction site by group interview & survey of construction worker who is the practice of the subject and then numerical analysis about awareness and action plan of Safety and health. The result of group interview and survey of construction worker, most of construction worker feel the danger during the work. Then construction worker analysis results that risk assessment helps to change & raise awareness of safety and reduce an industrial disaster. Easy Safety management activity such as TBM & safety education active will be necessary for safe worksite and then I suggest the TBT(tool box talk) active which combines TBM & safety education.
-
Most frequently happening accident in construction working sites was fall in high and dangerous position. Most of fall accidents resulted in serious injury or death of workers. In this research was analysed recent safety accidents for three years from 2010' to 2012 and was developed the safety equipment to be able to efficiently prevent and reduce fall accidents. This new safety equipment can be easily fixed to the reinforcing steel or steel girder etc by the fixing hook of life saving line and is comfortablely portable because of its light weight. The questionnaire study of the developed equipment was performed to investigate the problem in the view point of using in real sites. The result shows that the new fixing fook can reduce fall accidents and satisfy construction workers.
-
Large and complicated firefighting environment is accelerating in the early activities in the field of fire officials at the time limit situation leads to people's lives and property damage, as well as the loss of the Fire Service. Therefore, the state-of-the-art technology that can respond to rapidly changing fire environment urgently in the field of fire fighting have been introduced should be utilized. These intelligent firefighting robots build daegukmin firefighting safety net that can be used when. Other advanced technology industries, the most effective ways that can be introduced into the firefighting shall be provided in the current situation of the industry's initial firefighting robots.
-
Cultural assets of the country's history and cherish the living conditions of the people, conscious and cohesive crystals, and the pride of the hearts of the people as a haven. In the country worth preserving national treasure, bomulgeup, local cultural heritage as a major cultural property protection are. Cultural properties, etc. Most are wooden, is vulnerable to fire, and, moreover battling to far away from the city and due to the geographical conditions are very challenging aspects. The national cultural assets, such as the many temples, vows to fire one if the loss of a centuries-old cultural property is a big loss of national posterity to great shame is not. Still cultural assets and a large number of visitors have flocked temples. All of us to keep the look and feel of the cultural assets pleasure to conserve cultural assets preserved to ensure that fire prevention is always unmistakably bear in mind that sees.
-
Kim, Jong-Gurl;Kim, Chang-Su;Kim, Hyung-Man;Choi, Sung-Won;Park, Ji-Sung;Song, Jung-Moo;Yun, Hye-Seon;Kang, Woo-Tae 501
우리나라는 비약적인 산업기술발전을 통해 선진국 진입을 눈앞에 두고 있다. 하지만 선진국 진입에 있어 크게 세 가지의 걸림돌이 있다. 첫째로는 세계시장 진입의 장벽, 둘째로 제조물책임법(PL법) 대응방안 미흡, 셋째로는 고객신뢰 및 자원의 한계 이다. 이러한 한계점으로 인하여 신뢰성경영시스템의 필요성이 대두되고 있으며 국내의 신뢰성경영시스템의 활성화는 필수 요소로 다가오고 있다. 본 논문에서는 신뢰성경영시스템의 활성화와 이를 위한 지표개발의 필요성 및 개발 방향성을 제시해보고자 한다. -
보증 데이터를 통해 제품의 수명 및 형상모수를 추정할 때 최우추정법과 같은 전통적인 통계 분석방법(Classical Statistical Method)을 많이 사용하였다. 그러나 전통적인 통계 분석방법을 통해 수명과 형상모수의 추정 시 표본의 크기가 작거나 불완전한 경우 추정량의 신뢰성이 떨어진다는 단점이 있고 또 누적된 경험과 과거자료를 충분히 이용하지 못하는 단점도 있다. 이러한 문제점을 해결하기 위해 모수의 사전분포를 가정하는 베이지안(Bayesian) 기법의 적용이 필요하다. 하지만 보증 데이터분석에 있어서 베이지안 기법을 이용한 연구는 아직 미흡한 실정이다. 본 연구에서는 수명분포가 와이블 분포를 갖는 보증데이터를 활용하여 모수 추정의 효율성을 비교 분석하고자 한다. 이를 위해 와이블 분포의 모수가 대수정규분포를 따르는 사전분포를 갖는 베이지안 기법과 전통적 통계기법인 생명표법(Actuarial method)을 활용하여 추정량을 도출하고 비교 분석하였다. 이를 통해 충분한 관측 데이터를 확보할 수 없는 경우에 베이지안 기법을 이용한 보증 데이터 분석방법의 성능을 확인하고자 한다.
-
이 논문은 미세공정변동에서 극소불량을 감지하는 관리도의 경제적 설계를 개발하기 위한 조사연구이다. 일반적인 관리도의 설계는 통계적 설계와 경제적 설계로 구분할 수 있다. 공정의 변동 원인에 따라 샘플의 간격(h), 샘플의 크기(n), 관리한계선(k) 등의 설계 모수를 최적접근방법으로 결정을 하는 경제적 설계의 모델을 조사하였다. 관리도의 경제적 설계는 공정의 관리이상상태를 효율적으로 감지하여 관리상태로 정상화 시키는 것에 대한 공정의 개선비용과 기대품질비용을 절약 할 수 있는 최적설계 방안이다. 그리고 Shewhart 관리도의 X-bar 통계량으로 극소불량을 검출 하는것에 한계가 있기 때문에 Zp 통계량과 분포를 설계하여 극소불량을 빠르게 감지할 수 있는 Zp 관리도의 설계를 적용하고, 미세공정변동을 정확하게 감지할 수 있는 CUSUM 관리도를 동시에 적용하였다. 따라서, 미세공정변동과 극소불량을 동시에 관리 할 수 있는 Zp-CUSUM 관리도의 통계적 설계 구조를 체계화 하였으며, 기존의 경제적 설계의 모델을 비교 분석하여 새로운 경제적 설계에 대한 모델을 제안하고자 한다.
-
Control chart is most widely used in SPC(Statistical Process Control), Recently it is a critical issue that the standard control chart is not suitable to non-normal process with very small percent defective. Especially, this problem causes serious errors in the reliability procurement, such as semiconductor, high-precision machining and chemical process etc. Procuring process control technique for non-normal process with very small percent defective and perturbation is becoming urgent. Control chart technique in non-normal distribution become very important issue. In this paper, we investigate on research trend of control charts under non-normal distribution.
-
This study investigates the delay declaration of the traffic insurance accident which is focused on a business truck causing the traffic insurance accident. The type of the delay declaration is classified as 15 types and it differs in level of payment of insurance money. It is most important that the support policy of government and the self-help of related business to reduce the delay declaration and pursue progressive solution. Moreover, it is essential not only introducing the strict regulation system but also adapting the various victim protection system.
-
Competition to attract customers to the increase of the golf club, but the less people enjoying golf for a variety of issues, including the economic downturn, so golf is going deepened. Therefore, the local golf club is faced with the difficulty of management. In the case of the golf club human resource is the most important factor, because it has a high labor intensive nature of the industry as a type of facilities and services on the basis of intangible human resources. In this paper, to confirm the internal marketing activities and internal service quality, basic premise is that for an external customer satisfaction, internal customer satisfaction should be preceded, and try to analyze these execution factors on job satisfaction and customer orientation, either directly or indirectly affected. The empirical results, the management support in the internal marketing activities were the factors affecting the intrinsic job satisfaction, and the internal service quality were factors affecting employees of the intrinsic job satisfaction and extrinsic job satisfaction.
-
제조공정에서 사용되어 지는 SPC(Statistical Process Control)관리 기법은 가피원인을 탐지하여 변동을 감소시키는 통계적 공정관리 시스템이다. SPC의 대표적인 관리 기법으로는 Shewhart관리도, Cusum관리도, EWMA관리도가 있으며 이러한 관리 기법들은 공정을 보다 안정적으로 관리 할 수 있도록 유지 및 예측하는데 사용 되어 진다. 하지만 제조 공정의 유형에 따라 샘플링 방법, 관리한계선 등을 다양하게 설정하여 보다 효율적인 관리를 모색하고 있다. 공정 형태에 따라 다양한 관리 방법과 분석 결과가 나타난다. 일반적으로 Xbar-R 관리도와 같은 Shewhart 관리도를 사용하지만 Batch 단위의 공정, 연속 공정의 라인에서 사용되기에는 부분적인 한계를 보이고 있다. 본 논문에서는 일반적인 관리도와 공정 변화에 민감하게 반응 할 수 있는 누적합 관리도와 지수가중치이동평균 관리도를 비교해 보고 작은 변동에 대한 탐지 능력이 우수한 지수가중치이동평균 관리도에 대한 연구동향과 사례를 분석하여 제조 공정에 적합한 관리 방법을 모색하고자 한다.
-
관리도를 사용하여 공정평균, 공정산포 등 여러 가지 공정모수를 관리할 수 있다. 그러나 공정모수의 미세 변동을 효과적으로 관리할 수 있는 기법체계는 아직 미완이다. 식스시그마 공정관리 등 정밀공정관리를 위해서는 미세 공정평균과 공정산포관리가 전제되어야한다. 특히 높은 수준의 공정능력을 유지하기위해서는 공정산포관리가 선결과제이다. 본 본문에서는 공정평균과 공정불량률, 공정산포의 미세변동을 효과적으로 관리할 수 있는 기술체계의 연구동향을 분석하고 미세공정산포관리를 위한 대안을 제시하고자 한다.
-
As far as recent investment in railway, disused railway yards is increased in each line and region. As a result, related local government and agencies has been increased interest for utilization of disused railway yard. In this study, we investigated the status of the disused railway yards and conducted legal review on the use of disused railway yards. In addition, we analyze the disused railway yards use practices through case analysis and suggest plans to diversify ways to use.
-
In this study, a combination of the plasma discharge in the reactor by the reaction surface discharge reactor complex catalytic reactor and air pollutants, hazardous gas SOx, change in frequency, residence time, and the thickness of the electrode, the addition of simulated composite catalyst composed of a variety of gases, including decomposition experiments were performed by varying the process parameters. 20W power consumption 10kHz frequency decomposition removal rate of 99% in the decomposition of sulfur oxides removal experiment that is attached to the titanium dioxide catalyst reactor experimental results than if you had more than 5% increase. If added to methane gas was added, the removal efficiency increased decomposition, the oxygen concentration increased with increasing degradation rate in the case of adding carbon dioxide decreased.
-
건물 에너지 절감을 할 수 있는 방안을 찾고자 한다. 문제점 해결 기법을 이용하여 건물에너지를 절감할 수 있는 방안을 제시하고자 한다. 건물 에너지 사용 실태를 분석하고, 에너지 사용용도별로 구분하여 에너지를 절감할 수 있는 방법을 찾아 활용할 수 있도록 한다.
-
In this paper, we provide application strategies of representative finance and investment metrics using breakdown properties of Return On Equity(ROE). The research discusses the relationship of ROE for finance and investment metrics such as Return On Asset(ROA), Return On Invested Capital(ROIC), Price Book Ratio(PBR), and Price Earning Ratio(PER). Furthermore, we provide three different perspectives of its purpose and utility of Residual Income(RI) Models, Market Value(MV) Models and Enterprise Value(EV) Models.