This paper proposed a simple method for measuring surface roughness of ground surface. utilizing non-contact in-process measuring system using the diode laser. The measurement system is consisted of a laser unit with a diode laser and a cylindrical lens a detecting unit with polygon mirror and CCD array sensor. and a signal processing unit with a computer and device. During operation, this measuring system can provide information on surface roughness in the measuring distance with a single sampling and simultanilusly monitor the state of the grind wheel. The experimental results, showed that the increase of the feed rate and the dressing speed an caused increase in the surface roughness and when the surface roughness is 4Rmax-10Rmax, the cutting speed is 1653m/min-1665m/min. the feed rate is 0.2m/min-0.9m/min, the dressing speed is 0.2mm/rev-0.4mm/rev, the stylus method and the in-process method can be obtained the same results. thus under limited working conditions. using the proposed system. the surface roughness of the ground surface during cylindrical grinding can be obtained through the in-process measurement method using the diode laser.

The thermal deformation of machine tool spindle influences the performance of the manufacturing systems for precision products. In this research thermal analysis of a high speed machine tool spindle with the rolling bearing and the built-in motor is carried out using Finite Difference Method. The thermal boundary conditions describing the hear generation in the bearing and built-in motor are considered in the simulation. And various convective boundary conditions are assumed with the empirical formula in the references. From the simulation results the characteristics of each element affecting the dynamic thermal behaviour of the machine tool spindle systems have been clarified. This model can be well applied to the future development of the high speed spindle systems.

This paper describes investigation of the dressing time by laser in the surface grinding operation. Always dressing work is done before grinding operation. And then generates wear and roading on the wheel by contact between the grinding performance but also ground surfaces. On these states dressing work is needed. On this paper contour of the wheel by He-Ne laser is measured. It has also been found that the wheel deflection reduces the actual depth of cut and the roughness of the ground surface.

The feasibility of generating controlled surface topographies in single-point conventional turning operations is investigated. First a mathematical model of the surface generation process was developed. Second in order to control the texture of the machined surface a micro-positioning stage and the associated command generation software were designed and built. Experimental examples have shown that surface texture can be precisely controlled and is in good agreement with the theoretical predictions.

To reduce the shock in shifting the clutches and the brakes in automatic transmission have to be connected smoothly and disconnected rapidly. It is PCSV(Pressure Control Solenoid Valve) that play this role of automatic transmission. In this paper there were two steps in the analysis of the PCSV. The first step was modeling the elctromagnet by the permeance method. The second step was modeling the hydraulic circuit by the pressure differential equation. In addition to this modeling a experiment was performed and the commercial package program was used in order to justify modeling. The result of modeling coincide with the result of experiment and commercial package program. As a result this modeling is usable in analysis of dynamic characteractic of the PCSV.

A micro positioning system using piezoelectric actuators have very wide application region such as ultra-precision machine tool optical device measurement system. In order to keep a high precision displacement resolution it to useful to take a position sensor and feedback of the error. From the practical point of view high-resolution displacement sensor systems are very expensive and it is difficult to make such a sensitive sensor work properly in a poor operational environment of industry. In this study a piezo-electric micro-depth control system which does not require position sensor but piezoelectric voltage feedback has been developed. It is driven by hysteresis-considering reference input voltage calculated in advance and actuator/sensor characteristics of piezoelectric materials. From the result of experiments a fast and stable response of micro-depth control system has been achieved and an efficient technique to control the piezoelectric actuator suggested.

광학용 정밀유리와 건축용 패널유리 전문가공을 위한 CNC Glass Scribing Machine 을 개발하였다. 이제까지는 고품질의 고가기계를 수입하여 사용하던가 간이 자동화된 자체 개발기계를 사용하여 여유있게 절단한후 연삭가공에서 정밀칫수를 맞추는 작업을 해왔었다. 그러나 금번 개발된 기계를 사용하여 작업한 결과 연삭공정을 생략할수 있음은 물론 가공칫 수 정밀도도 일급 수준을 얻을수 있었다. 그러나 아직 세계일류의 품질과 성능은 도달치 못 했다. 생산성 향상을 위한 이송속도 향상설계와 가공칫수 정밀도의 초일급 달성을 위한 초 정밀설계를 통해 품질과 성능에서 세계일류의 상품화 개발과정을 준비중에 있다. 본논문에 서는 본 기계의 개발과정 및 주요요소기술들과 개발 결과를 정리하였다.

In recent years grinding techniques for precision machining of brittle materials used in electric optical and magnetic parts have been improved by using superabrasive wheel and precision grinding machine. The completion of optimum dressing of superabrasibve wheel makes possible the effective precision grinding of brittle materials. But the present dressing system cannot have control of optimum dressing of the superabrasive wheel. This study has proposed a new optimum in-process dressing of superabrasive wheel and give very effective control according to gap increase.

In Turning It is good selection of cutting condition and cutting tools that influence upon the accuracy of dimension manufacturing efficiency and extension of tool life. Among them especially the identification of cutting force due to the change of cutting conditions which exerts a great influence on the turning is very important. In this study the cutting resistance due to the change of cutting conditions was caculated by using the energy method and good agreement in shown between theoritical and experimental results which were tested for the cutting resistance at the cemented carbide cutting tools with workpieces of SM20C and SM 45C.

A new fungible materal named Epoxy-Granite composite is applied to the column structure of drilling center in order to investigate the advanced dynamic chatateristics comparing with a conventional cast iron material. The dimensions of new colum structure are adjusted to keep the same stiffness (El value) and the manufacturing conditions are formulated based on the preceeding research experience about the development of Epoxy-Granite structural material. The two kinds of experiments are set up. one of which is for the measurement of natural mode and frequency using experimental modal analysis and the other one is for the measurement of vibration amplitude during idling operation of a machine fool. The comparison of maximum, accelerance values at each natural frequency of bending mode shows a Epoxy-Granite column have larger modal damping ratios(over 2times) than a cast iron column. The vibration amplitude of Epoxy-Granite column measued on the bed motor base and top of column are also much smaller (up to 12%) than the case of cast iron column. It is therefore confirmed that a Epoxy-Granite materal exhibits a good anti-vibrational property even if it is used under the actual operational environments of machine eool as a practical structural element.