DOI QR코드

DOI QR Code

Effects of Mooring-Design Parameters and Layout Configuration on the Dynamic Responses of Modular Floating Structures

  • Min Ju Maeng (Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Dong Hee Choi (Department of Naval Architecture and Ocean Engineering, Seoul National University) ;
  • Bo Woo Nam (Department of Naval Architecture and Ocean Engineering, Seoul National University)
  • Received : 2026.04.01
  • Accepted : 2026.06.01
  • Published : 2026.08.31

Abstract

Mooring systems for modular floating structures (MFSs) in shallow water require designs that account for a limited water depth, restricted footprint, and coupled responses among floaters, connectors, and mooring lines. This study aimed to identify an effective mooring design for an MFS under shallow-water constraints. Time-domain simulations were performed using OrcaFlex, and the numerical model was validated against the model test results for a 1×2 MFS with hinge and rigid connectors. Extreme loads corresponding to a 100 year return period were applied under collinear wave, wind, and current conditions. The mooring-line length, nominal diameter, spread angle, footprint, clump weight, and connector type were examined. The results showed that the maximum offset varied monotonically with the line length and diameter, whereas the maximum mooring tension exhibited a nonlinear behavior due to snap loads. A spread angle of δ = 30° provided a balanced performance by limiting excessive motion and maintaining structural safety. Clump weights reduced the required footprint by up to 76%, although they slightly increased the mooring tension. The spring-fender connector reduced excessive motions and peak tensions when compared with those observed with the hinge connector. These findings support an integrated mooring-design approach for shallow-water MFSs.

Keywords

Acknowledgement

This research was supported by the Korea Agency for Infrastructure Technology Advancement (KAIA) grant funded by the Ministry of Land, Infrastructure and Transport (Grant RS-2023-00250727) through the Korea Floating Infrastructure Research Center at Seoul National University. This work was also supported by the Korea Institute for Advancement of Technology (KIAT) grant funded by the Korea Government (MOTIE) (RS-2023-KI002688, Human Resource Development Program for Industrial Innovation (Global)). This research was a part of the project titled "Fostering Talent in Advanced Ship Blue Tech (RS-2025-02221147)," funded by the Ministry of Oceans and Fisheries, Korea.

References

  1. Bargeco, A. G. (1985). Securing of marine platforms in rough sea. Recent Patents on Engineering, 104.
  2. Choi, D. H., Jeon, J. M., Maeng, M. J., Kim, J. H., & Nam, B. W. (2024). Experimental and numerical study on motion responses of modular floating structures with connectors in waves. Ocean Systems Engineering, 14(3), 277–299. https://doi.org/10.12989/ose.2024.14.3.277
  3. Dai, J., Ang, K. K., Jin, J., Wang, C. M., Hellan, Ø., & Watn, A. (2019). Large floating structure with free-floating, self-stabilizing tanks for hydrocarbon storage. Energies, 12(18), 3487. https://doi.org/10.3390/en12183487
  4. Derstine, M. S., & Brown, R. T. (2000). A compliant connector concept for the mobile offshore base. Marine Structures, 13(4–5), 399–419. https://doi.org/10.1016/S0951-8339(00)00017-4
  5. Ding, J., Wu, Y. S., Zhou, Y., Ma, X. Z., Ling, H. J., & Xie, Z. (2020). Investigation of connector loads of a 3-module VLFS using experimental and numerical methods. Ocean Engineering, 195, 106684. https://doi.org/10.1016/j.oceaneng.2019.106684
  6. DNV GL AS. (2017). Environmental conditions and environmental loads (DNVGL-RP-C205, Recommended Practice, August 2017).
  7. Dong, G., Mao, Y., Wu, Y., Ma, X., Yuan, F., Lu, X., Zhang, L., Zhou, D., & Liu, Z. (2024). Experimental study on the hydrodynamic performance of a flexible connected double-module floating structure. Journal of Offshore Mechanics and Arctic Engineering, 146(5), 051703. https://doi.org/10.1115/1.4064537
  8. Flikkema, M., & Waals, O. (2019). Space@Sea the floating solution. Frontiers in Marine Science, 6, 553. https://doi.org/10.3389/fmars.2019.00553
  9. Haney, J. A. (1999, September). Mob connector development. In Proceedings of the Third International Workshop on Very Large Floating Structure (Vol. 2, pp. 651–659). Honolulu, Hawaii, USA.
  10. Hsu, W. T., Thiagarajan, K. P., & Manuel, L. (2017). Extreme mooring tensions due to snap loads on a floating offshore wind turbine system. Marine Structures, 55, 182–199. https://doi.org/10.1016/j.marstruc.2017.05.005
  11. Jung, D. H., Shin, S. H., Kim, H. J., & Lee, H. S. (2011). A preliminary design of mooring system for floating wave energy converter. Journal of the Korean Society for Marine Environment & Energy, 14(3), 184–191. https://doi.org/10.7846/JKOSMEE.2011.14.3.184
  12. Jung, D. H., Shin, S. H., Nam, B. W., Kim, H. J., Lee, H. S., & Moon, D. S. (2012). Design for mooring line with using commercial software. Proceedings of the Korean Society for Marine Environment & Energy Conference (Vol. 1, No. 1, pp. 1688–1691).
  13. Otto, W. J., Waals, O. J., Bunnik, T. H. J., & Cresp, J. (2019b, June). Optimization of wave induced motions and forces on a floating island. In the 29th International Ocean and Polar Engineering Conference (pp. ISOPE-I-19-722). ISOPE.
  14. Otto, W., Waals, O., Bunnik, T., & Ceneray, C. (2019a, July). Wave induced motions of a floating mega island. In WCFS2019: Proceedings of the World Conference on Floating Solutions (pp. 173–189). Springer. https://doi.org/10.1007/978-981-13-8743-2_9
  15. Park, M. (2009). Preliminary design procedure of mooring system for deep water offshore platforms [Master's thesis, Seoul National University].
  16. Ren, N., Zhang, C., Magee, A. R., Hellan, Ø., Dai, J., & Ang, K. K. (2019). Hydrodynamic analysis of a modular multi-purpose floating structure system with different outermost connector types. Ocean Engineering, 176, 158–168. https://doi.org/10.1016/j.oceaneng.2019.02.052
  17. Shi, Q. J., Zhang, H. C., Xu, D. L., Qi, E. R., Tian, C., Ding, J., Wu, Y. S., Lu, Y., & Li, Z. W. (2018). Experimental validation of network modeling method on a three-modular floating platform model. Coastal Engineering, 137, 92–102. https://doi.org/10.1016/j.coastaleng.2018.04.001
  18. Song, B. (2012). Research on the connector of very large floating offshore base. Journal of Ship Mechanics, 7, 829–837.
  19. Waals, O. J., Bunnik, T. H. J., & Otto, W. J. (2018, June). Model tests and numerical analysis for a floating mega island. In International conference on offshore mechanics and arctic engineering (Vol. 51203, p. V001T01A016). American Society of Mechanical Engineers. https://doi.org/10.1115/OMAE2018-78589
  20. Wu, Y. S., Ding, J., Tian, C., Li, Z. W., Ling, H. J., Ma, X. Z., & Gao, J. L. (2018). Numerical analysis and model tests of a three-module VLFS deployed near islands and reefs. Journal of Ocean Engineering and Marine Energy, 4(2), 111–122. https://doi.org/10.1007/s40722-018-0112-3
  21. Xu, D., Zhang, H., Qi, E., Hu, J., & Wu, Y. (2014). On study of nonlinear network dynamics of flexibly connected multi-module very large floating structures. In Vulnerability, Uncertainty and Risk: Quantification, Mitigation, and Management (pp. 1805–1814). American Society of Civil Engineers. https://doi.org/10.1061/9780784413609.181
  22. Xu, K., Larsen, K., Shao, Y., Zhang, M., Gao, Z., & Moan, T. (2021). Design and comparative analysis of alternative mooring systems for floating wind turbines in shallow water with emphasis on ultimate limit state design. Ocean Engineering, 219, 108377. https://doi.org/10.1016/j.oceaneng.2020.108377