Coupled systems mechanics

  • 제13권5호
  • /
  • Pages.411-432
  • /
  • 2024
  • /
  • 2234-2184(pISSN)
  • /
  • 2234-2192(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The theoretical mechanism of grey GM(1,1) model for coupled systems

  • C.C. Hung (Faculty of National Hsin Hua Senior High School) ;
  • T. Nguyen (Ha Tinh University) ;
  • C.Y. Hsieh (National Pingtung University Education School)
  • 투고 : 2023.05.08
  • 심사 : 2024.10.11
  • 발행 : 2024.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

The GM(1,1) gray forecasting model is a type of short-term forecasting technique that has been successfully applied to management and engineering problems with only four dates. However, when a new system is built, the system is uncertain and variable, so the data collected is usually not clear, which cannot be used to predict the GM(1,1) gray model. To solve this problem, the fuzzy system derived from the collected fuzzy gray control parameter data is considered as derivation of GM(1,1) fuzzy gray model to obtain the projection values under the fuzzy system to be predicted. The method isn't restricted to either the TS fuzzy or Mamdani type. The proposed solution based on stability guarantee is a local one. Finally, an example will be described for clarification. A single controller can compensate for the effects of noise and harmonic noise at many performance points. And the dynamic performance of a single controller is satisfactory during the transient. for fairness Numerical and computer experiments are described in the perfection of the methods we offer in research.

키워드

참고문헌

  1. Canovas-Gonzalez, M. (2023), "Validity of the Nielsen-type hanger arrangement in spatial arch bridges with straight decks", Steel Compos. Struct., 47(1), 51. https://doi.org/10.12989/scs.2023.47.1.051.
  2. Chandrasekaran, A. (2023), "Experimental investigations on resilient beam-column end-plate connection with structural fuse", Steel Compos. Struct., 47(3), 315. https://doi.org/10.12989/scs.2023.47.3.315.
  3. Chen, B. (2023), "Experimental study on vibration serviceability", Steel Compos. Struct., 46(4), 577. https://doi.org/10.12989/scs.2023.46.4.577.
  4. Chen, C. (2006), "Energy dissipation and velocity distribution of internal soliton encountering submerged triangular obstacle", Journal of Southwest Jiaotong University.
  5. Chen, C. (2006), "Numerical model of internal solitary wave evolution on impermeable variable", Chin. Ocean Eng., 20(2), 303-313.
  6. Chen, C. (2006), "S-curve regression of fuzzy method and statistical application", Proceedings of the 10th IASTED International Conference on Artificial Intelligence and Soft Computing.
  7. Chen, C.H. (2007), "Interfacial wave motion in an impermeable rigid channel with stratified density fluid system", Adv. Water Sci., 18(4), 575-579.
  8. Chen, C.H. (2007), "Interfacial wave motion in an impermeable rigid channel", Adv. Water Sci., 18(4), 570-574.
  9. Chen, C.W. (2002), "A novel fuzzy regression approach on managing target cash balance for construction firms", 17th IASTED International Conference on Modeling and Simulation, Montreal, Canada.
  10. Chen, C.W. (2002), "A stability criterion of time-delay fuzzy systems", J. Marine Sci. Technol., 10(1), 5.
  11. Chen, C.W. (2002), "Application of modeling and control", Proc.-Contr. Theory Appl., 149, 1-10. https://doi.org/10.1049/ip-cta:20020319
  12. Chen, C.W. (2002,), "Model-based fuzzy control for nonlinear tuned mass damper", 2002 IEEE Conference. https://doi.org/10.1109/ICIT.2002.1189862.
  13. Chen, C.W. (2004), "fuzzy control of structural systems using Takagi-Sugeno fuzzy model", Proceedings of the IEEE Conference on Mechatronics, ICM'04, 340-345.
  14. Chen, C.W. (2004), "Fuzzy regression to construction management via TS fuzzy model", Artificial Intelligence and Applications: IASTED Proceedings, 22nd IASTED Multi-Conference on Applied Informatics.
  15. Chen, C.W. (2004), "Stability analysis of T-S fuzzy models for nonlinear multiple time-delay interconnected systems", Math. Comput. Simul., 66(6), 523-537. https://doi.org/10.1016/j.matcom.2004.04.001.
  16. Chen, C.W. (2006), "Fuzzy Lyapunov method for stability conditions of nonlinear systems", Int. J. Artif. Intel. Tool., 15(02), 163-171. https://doi.org/10.1142/S0218213006002618.
  17. Chen, C.W. (2006), "Stability conditions of fuzzy systems and its application to structural and mechanical systems", Adv. Eng. Softw., 37(9), 624-629. https://doi.org/10.1016/j.advengsoft.2005.12.002.
  18. Chen, C.W. (2007), "A novel delay-dependent criterion for time-delay TS fuzzy systems using fuzzy Lyapunov method", Int. J. Artif. Intel. Tool., 16(03), 545-552. https://doi.org/10.1142/S0218213007003400.
  19. Chen, C.W. (2007), "A novel delay-dependent criterion for time-delay TS fuzzy systems using fuzzy Lyapunov method", Int. J. Artif. Intel. Tool., 16(03), 545-552. https://doi.org/10.1142/S0218213007003400
  20. Chen, C.W. (2007), "Analysis of experimental data on internal waves with statistical method", Eng. Comput., 24(2), 116-150. https://doi.org/10.1108/02644400710729536.
  21. Chen, C.W. (2007), "Application of fuzzy stability control for buildings", Artif. Intel. Appl., 592-597.
  22. Chen, C.W. (2007), "Modeling, H∞ control and stability analysis for structural systems using TakagiSugeno fuzzy model", J. Vib. Control, 13(11), 1519-1534. https://doi.org/10.1177/1077546307073690.
  23. Chen, C.W. (2008), "Stability analysis for time delay TLP systems", 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 1103-1107. https://doi.org/10.1109/AIM.2008.4601816.
  24. Chen, C.W. (2009), "Adaptive fuzzy sliding mode control for seismically excited bridges with lead rubber bearing isolation", IJUFKS, 17(05), 705-727. https://doi.org/10.1142/S0218488509006224.
  25. Chen, C.W. (2009), "Managing target the cash balance in construction firms using a fuzzy regression approach", IJUFKS., 17(05), 667-684. https://doi.org/10.1142/S0218488509006200.
  26. Chen, C.W. (2009), "Modeling and control for nonlinear structural systems via a NN-based approach", Exp. Syst. Appl., 36(3), 4765-4772. https://doi.org/10.1016/j.eswa.2008.06.062.
  27. Chen, C.W. (2009), "The stability of an oceanic structure with T-S fuzzy models", Math. Comput. Simul., 80(2), 402-426. https://doi.org/10.1016/j.matcom.2009.08.001.
  28. Chen, C.W. (2010), "Application of fuzzy-model-based control to nonlinear structural systems", J. Vib. Control, 16(11), 1651-1672. https://doi.org/10.1177/1077546309104185.
  29. Chen, C.W. (2010), "GA-based adaptive neural network controllers for nonlinear systems", Int. J. Innov. Comput., Inform. Control, 6(4), 1793-1803.
  30. Chen, C.W. (2010), "Modeling and fuzzy PDC control and its application to an oscillatory TLP structure", Math. Prob. Eng., 2010, Article ID 120403. https://doi.org/10.1155/2010/120403.
  31. Chen, C.W. (2010), "Stability analysis of an oceanic structure using the Lyapunov method", Eng. Comput., 27(2), 186-204. https://doi.org/10.1108/02644401011022364.
  32. Chen, C.W. (2011), "A critical review of nonlinear fuzzy multiple time-delay interconnected systems", Scientif. Res. Essay., 6(28), 5917-5932. https://doi.org/10.5897/SRE11.1347.
  33. Chen, C.W. (2011), "A critical review of parallel distributed computing", Int. J. Phys. Sci., 6(19), 4492-4501. https://doi.org/10.5897/IJPS11.908.
  34. Chen, C.W. (2011), "Conceptual framework and research method for personality traits and sales force automation usage", Scientif. Res. Essay., 6(17), 3784-3793. https://doi.org/10.5897/sre11.1022.
  35. Chen, C.W. (2011), "Internet services and interface design for marketing: A preliminary study of Cliven products", Int. J. Phys. Sci., 6(15), 3585-3596. https://doi.org/10.5897/IJPS11.606.
  36. Chen, C.W. (2011), "Modeling, control, and stability analysis for time-delay TLP systems", Neur. Comput. Appl., 20, 527-534. https://doi.org/10.1007/s00521-011-0576-8.
  37. Chen, C.W. (2011), "Stability analysis and robustness design of nonlinear systems: an NN-based approach", Appl. Soft Comput., 11(2), 2735-2742. https://doi.org/10.1016/j.asoc.2010.11.004.
  38. Chen, C.W. (2011), "Stabilization of adaptive neural network controllers", J. Vib. Control, 17(8), 1241-1252. https://doi.org/10.1177/1077546309352827.
  39. Chen, C.W. (2012), "A novel strategy to determine the insurance and risk control plan for natural disaster risk management", Nat. Hazard., 64, 1391-1403. https://doi.org/10.1007/s11069-012-0305-3.
  40. Chen, C.W. (2012), "Default risk-based probabilistic decision model for risk management and control", Nat. Hazard., 63, 659-671. https://doi.org/10.1007/s11069-012-0183-8.
  41. Chen, C.W. (2012), "Hazard management and risk design by optimal statistical analysis", Nat. Hazard., 64, 1707-1716. https://doi.org/10.1007/s11069-012-0329-8.
  42. Chen, C.W. (2012), "knowledge-sharing intention among taiwanese enterprises: A model of hypotheses", Human Fact. Ergonom. Manuf. Serv. Industr., 22(4), 362-371. https://doi.org/10.1002/hfm.20286.
  43. Chen, C.W. (2013), "A new viewpoint of hazard assessment and management for Taiwan's insurance issues", Nat. Hazard., 65, 303-314. https://doi.org/10.1007/s11069-012-0363-6.
  44. Chen, C.W. (2013), "A study of PDC fuzzy control of structural systems using LMI approach", Proceedings of the IASTED International Conference, Applied Informatics.
  45. Chen, C.W. (2013), "Application of GIS for the determination of hazard hotspots", Nat. Hazard., 66, 191-228. https://doi.org/10.1007/s11069-012-0402-3.
  46. Chen, C.W. (2013), "factor evaluation of knowledge sharing intention in Taiwanese enterprises", Human Fact. Ergonom. Manuf. Serv. Industr., 23(2), 95-106. https://doi.org/10.1002/hfm.20300.
  47. Chen, C.W. (2013), "personality traits and sales force automation usage: A review of methodology", Human Fact. Ergonom. Manuf. Serv. Industr., 23(4), 294-305. https://doi.org/10.1002/hfm.20311.
  48. Chen, C.W. (2013), "The integration of nautical hazard assessment and harbor GIS models to the Taichung Port area in Taiwan", Nat. Hazard., 67, 275-294. https://doi.org/10.1007/s11069-013-0559-4.
  49. Chen, C.W. (2013), sales force automation usage: A preliminary study", Human Fact. Ergonom. Manuf. Serv. Industr., 23(3), 243-253. https://doi.org/10.1002/hfm.20313.
  50. Chen, C.W. (2014), "A criterion of robustness intelligent nonlinear control", Nonlin. Dyn., 76, 23-31. https://doi.org/10.1007/s11071-013-0869-9.
  51. Chen, C.W. (2014), "Interconnected TS fuzzy technique for nonlinear time-delay structural systems", Nonlin. Dyn., 76, 13-22. https://doi.org/10.1007/s11071-013-0841-8.
  52. Chen, C.W. (2015), "Smart monitoring system with multi-criteria decision", Smart Struct. Syst., 15(6), 1583-1600. https://doi.org/10.12989/sss.2015.15.6.1583.
  53. Chen, C.W. (2015), "Structural system simulation and control via NN based fuzzy model", Struct. Eng. Mech., 56(3), 385-407. https://doi.org/10.12989/sem.2015.56.3.385.
  54. Chen, C.Y. (2002), "On the permeability inside the granular media", J. Marine Sci. Technol., 10(2), 9.
  55. Chen, C.Y. (2005), "Fuzzy logic derivation of neural network models", Int. J. Artif. Intel. Tool., 14(06), 967-974. https://doi.org/10.1142/S021821300500248X.
  56. Chen, C.Y. (2006), "Profile evolution and energy dissipation for internal soliton transmitting over different submarine ridges", China Ocean Eng., 20(4), 585-594.
  57. Chen, C.Y. (2007), "Generation of internal solitary wave by gravity collapse", J. Marine Sci. Technol., 15(1), 1.
  58. Chen, C.Y. (2007), "Laboratory observations on internal solitary wave evolution", Ocean Eng., 34(1), 157-170. https://doi.org/10.1016/j.oceaneng.2005.11.019.
  59. Chen, C.Y. (2007), "Localized mixing due to an interfacial solitary wave breaking on seabed topography", J. Offshore Mech. Arct. Eng., 129(3), 245-250. https://doi.org/10.1115/1.2426991.
  60. Chen, C.Y. (2007), "Stability analysis for floating structures using TS fuzzy control", Advanced Intelligent Computing Theories and Applications. ICIC 2007, Qingdao, https://doi.org/10.1007/978-3-540-74205-0_79.
  61. Chen, C.Y. (2007), "Wave propagation at the interface of a two-layer fluid system in the laboratory", J. Marine Sci. Technol., 15(1), 2.
  62. Chen, C.Y. (2008), "Diagnosing and revising logistic regression models: effect on internal solitary wave propagation", Eng. Comput., 25(2), 121-139. https://doi.org/10.1108/02644400810855940.
  63. Chen, C.Y. (2008), "Experiments on mixing and dissipation in internal solitary waves", Environ. Fluid Mech., 8, 199-214. https://doi.org/10.1007/s10652-008-9055-x.
  64. Chen, C.Y. (2009), "A stability criterion for time-delay tension leg platform systems subjected to external force", China Ocean Eng., 23(1), 49-57.
  65. Chen, C.Y. (2010), "Applying half-circle fuzzy numbers to control system", Int. J. Marine Environ. Sci., 4(12), 1980-1984.
  66. Chen, C.Y. (2010), "Fuzzy control for an oceanic structure: a case study in time-delay TLP system", J. Vib. Control, 16(1), 147-160. https://doi.org/10.1177/1077546309339424.
  67. Chen, C.Y. (2010), "Linking the balanced scorecard (BSC) to business management performance", Int. J. Phys. Sci., 5(8), 1296-1305.
  68. Chen, C.Y. (2010), "The study of a forecasting sales model for fresh food", Exp. Syst. Appl., 37(12), 7696-7702. https://doi.org/10.1016/j.eswa.2010.04.072.
  69. Chen, P.C. (2008), "GA-based fuzzy sliding mode controller for nonlinear systems", Math. Prob. Eng., 2008, Article ID 325859. https://doi.org/10.1155/2008/325859.
  70. Chen, P.C. (2009), "Application to GA-based fuzzy control for nonlinear systems with uncertainty", 2009 Conference on Intelligent Information, 249-252. https://doi.org/10.1109/ACIIDS.2009.86.
  71. Chen, P.C. (2009), "GA-based modified adaptive fuzzy sliding mode controller", Exp. Syst. Appl., 36(3), 5872-5879. https://doi.org/10.1016/j.eswa.2008.07.003.
  72. Chen, P.C. (2009), "Stability analysis of fuzzy control for nonlinear systems", 2009 Conference on Intelligent Information, 238-242. https://doi.org/10.1109/ACIIDS.2009.83.
  73. Chen, P.C. (2011), "GA-based decoupled adaptive FSMC for nonlinear systems by a singular perturbation scheme", Neur. Comput. Appl., 20, 517-526. https://doi.org/10.1007/s00521-011-0540-7.
  74. Chen, P.C. (2011), "Linear matrix inequality conditions of nonlinear systems", J. Vib. Control, 17(2), 163-173. https://doi.org/10.1177/1077546309352826.
  75. Chen, T.H. (2008), "A mathematical tool for inference in logistic regression with small-sized data sets", Math. Prob. Eng., 2008, Article ID 186372. https://doi.org/10.1155/2008/186372.
  76. Chen, T.H. (2009), "Application of logistic regression model: propagation effect on internal soliton", J. Chung Cheng Inst. Technol., 37, 1-10.
  77. Chen, T.H. (2010), "Application of data mining to the spatial heterogeneity of foreclosed mortgages", Exp. Syst. Appl., 37(2), 993-997. https://doi.org/10.1016/j.eswa.2009.05.076.
  78. Chen, Y. (2023), "Experimental study on fatigue behavior of innovative hollow composite bridge slabs", Steel Compos. Struct., 46(6), 745. https://doi.org/10.12989/scs.2023.46.6.745.
  79. Chen, Z.Y. (2002), "Fuzzy control for nonlinear systems modeled via neural-network", 2002 IEEE Conference on Industrial Technology, 1, 66-71. https://doi.org/10.1109/ICIT.2002.1189863.
  80. Cheng, M.H. (2009), "Modelling the propagation of an internal solitary wave across double ridges and a shelf-slope", Environ. Fluid Mech., 9, 321-340. https://doi.org/10.1007/s10652-008-9104-5.
  81. Cheng, X. (2023), "On wave propagation of football ball in the free kick and the factors affecting it", Steel Compos. Struct., 46(5), 669. https://doi.org/10.12989/scs.2023.46.5.669.
  82. Chiang, W.L. (2001), "Application and robust H?? control of PDC fuzzy controller for nonlinear systems with external disturbance", J. Marine Sci. Technol., 9(2), 3.
  83. Chiang, W.L. (2010), "A neural-network approach to modeling and analysis", Proceedings of the International Conference on Tools with Artificial Intelligence.
  84. Chiang, W.L. (2010), "Detecting the sensitivity of structural damage based on the Hilbert-Huang transform approach", Eng. Comput., 27(7), 799-818. https://doi.org/10.1108/02644401011073665.
  85. Chiou, D.J. (2011), "Applications of Hilbert-Huang transform to structural damage detection", Struct. Eng. Mech., 39(1), 1-20. https://doi.org/10.12989/sem.2011.39.1.001.
  86. Dong, F. (2023), "Finite element computer simulation of twinning caused by plastic deformation of sheet metal", Steel Compos. Struct., 47(5), 601. https://doi.org/10.12989/scs.2023.47.5.601.
  87. Doostdar, P. (2020), "INS/GNSS integration using recurrent fuzzy wavelet neural networks", GPS Solut., 24, 29. https://doi.org/10.1007/s10291-019-0942-z.
  88. Doostdar, P. (2022), "NN model-based evolved control by DGM model for practical nonlinear systems", Exp. Syst. Appl., 193, https://doi.org/10.1016/j.eswa.2021.115873.
  89. Fan, X., Li, J. and Hao, H. (2021), "Review of piezoelectric impedance based structural health monitoring", Adv. Struct. Eng., 24(16), 3609-3626. https://doi.org/10.1177/13694332211038444.
  90. Fard, K.M. (2023), "Energy absorption optimization on a sandwich panel with lattice core under the low-velocity impact", Steel Compos. Struct., 46(4), 525-538. https://doi.org/10.12989/scs.2023.46.4.525.
  91. Farrar, C.R. (2001), "Historical overview of structural health monitoring", Lecture Notes on Structural Health Monitoring Using Statistical Pattern Recognition, Los Alamos Dynamics, Los Alamos, NM, USA.
  92. Hossein, N. (2018), "Fuzzy adaptive integration scheme for low-cost SINS/GPS navigation system", Mech. Syst. Signal Pr., 99, 434-449. https://doi.org/10.1016/j.ymssp.2017.06.030.
  93. Hsiao, F.H. (2003), "Robustness design of fuzzy controllers for nonlinear interconnected systems", SICE Annual Conference Program and Abstracts SICE Annual Conference 2003, 34-34.
  94. Hsiao, F.H. (2004), "Decentralized fuzzy control for nonlinear multiple time-delay large-scale systems", SICE 2004 Annual Conference, 3, 2806-2810.
  95. Hsiao, F.H. (2005), "Application and robustness design of fuzzy controller for resonant and chaotic systems with external disturbance", IJUFKS, 13(03), 281-295. https://doi.org/10.1142/S0218488505003461.
  96. Hsiao, F.H. (2005), "Fuzzy controllers for nonlinear interconnected TMD systems with external force", J. Chin. Inst. Eng., 28(1), 175-181. https://doi.org/10.1080/02533839.2005.9670984.
  97. Hsiao, F.H. (2005), "Robust stabilization of nonlinear multiple time-delay large-scale systems via decentralized fuzzy control", IEEE Trans. Fuzzy Syst., 13(1), 152-163. https://doi.org/10.1109/TFUZZ.2004.836067.
  98. Hsiao, F.H. (2005), "TS fuzzy controllers for nonlinear interconnected systems with multiple time delays", IEEE Trans. Circuit. Syst. I: Regular Papers, 52(9), 1883-1893. https://doi.org/10.1109/TCSI.2005.852492.
  99. Hsiao, F.H. (2005). Fuzzy control for nonlinear systems via neural-network-based approach", Int. J. Comput. Meth. Eng. Sci. Mech., 6(3), 145-152. https://doi.org/10.1080/15502280590923612.
  100. Hsieh, T.Y. (2004), "A case study of S-curve regression method to project control of construction management via TS fuzzy model", J. Marine Sci. Technol., 12(3), 10.
  101. Hsieh, T.Y. (2006), "A new viewpoint of s-curve regression model and its application to construction management", Int. J. Artif. Intel. Tool., 15(02), 131-142. https://doi.org/10.1142/S021821300600259X.
  102. Hsu, M.H. (2013), "Routing protocol performance evaluation in wireless Ad hoc network", Inform. Technol. J., 12(22), 6595.
  103. Hsu, W.K. (2011), "An integrated flood risk assessment model for property insurance industry in Taiwan", Nat. Hazard., 58, 1295-1309. https://doi.org/10.1007/s11069-011-9732-9.
  104. Hsu, W.K. (2012), "Risk and uncertainty analysis in the planning stages of a risk decision-making process", Nat. Hazard., 61, 1355-1365. https://doi.org/10.1007/s11069-011-0032-1.
  105. Hsu, W.K. (2013), "A probabilistic approach for earthquake risk assessment based on an engineering insurance portfolio", Nat. Hazard., 65, 1559-1571. https://doi.org/10.1007/s11069-012-0425-9.
  106. Hsu, W.K. (2013), "Earthquake risk assessment and optimal risk management strategies for hi-tech fabs in Taiwan", Nat. Hazard., 65, 2063-2076. https://doi.org/10.1007/s11069-012-0462-4.
  107. Hsu, W.K. (2014), "A case study of damage detection in four-bays steel structures using the HHT approach", Smart Struct. Syst., 14(4), 595-615. https://doi.org/10.12989/sss.2014.14.4.595.
  108. Hsu, W.K., Huang, P.C., Chang, C.C., Chiang, W.L., Chiou, D.J. and Chen, C.W. (2023), "Generation of artificial rainfall events for flood risk assessment in Taiwan", Nat. Hazard., 119, 2235-2250. https://doi.org/10.1007/s11069-014-1233-1.
  109. Huang, C.F. (2007), "Managing target cash balance in construction firms using novel fuzzy regression approach", ICIC 2007, Qingdao, China, August. https://doi.org/10.1007/978-3-540-74205-0_74.
  110. Im, C.R. (2023), "Cyclic loading test for concrete-filled hollow PC column produced using various inner molds", Steel Compos. Struct., 46(6), 793. https://doi.org/10.12989/scs.2023.46.6.793.
  111. Jafari, N. (2023), "Nonlinear free vibration analysis of moderately thick viscoelastic plates", Steel Compos. Struct., 48(3), 293-303. https://doi.org/10.12989/scs.2023.48.3.293.
  112. Jansukpum, K. (2015), "Applying innovation resistance theory to understand consumer resistance", 2015 14th International Symposium. https://doi.org/10.4156/AISS.vol4.issue22.7.
  113. Karalar, M. (2023), "Experimental and numerical investigation on flexural response", Steel Compos. Struct., 48(1), 43-57. https://doi.org/10.12989/scs.2023.48.1.043.
  114. Ke, X. (2023), "Seismic performance and damage evaluation of concrete-encased CFST composite columns", Steel Compos. Struct., 47(1), 121. https://doi.org/10.12989/scs.2023.47.1.121.
  115. Khosravikhor, A. (2023), "Effect of Ni-Ti shape memory alloy on ductility and response modification factor of SPSW systems", Steel Compos. Struct., 48(3), 353. https://doi.org/10.12989/scs.2023.48.3.353.
  116. Kontoni, D.P.N. (2023), "Experimental and numerical study of a steel plate-based damper", Steel Compos. Struct., 47(2), 185-201. https://doi.org/10.12989/scs.2023.47.2.185.
  117. Kuan, F.Y. (2012), "The Consumers' heuristics effects of E-commerce's price promotion on perceived value", Adv. Inform. Sci. Serv. Sci., 4(20).
  118. Kuan, F.Y. (2012), "The impact of mood state of information service on purchase intention: A perspective of heuristics", Adv. Inform. Sci. Serv. Sci., 4(17).
  119. Kuan, F.Y. (2013), "Using RPC Block Adjustment models for the accuracy of environmental research", Stochast. Environ. Res. Risk Assess., 27, 1315-1331. https://doi.org/10.1007/s00477-012-0668-8.
  120. Kuo, H.M. (2009), "A study of information and aiding interface design in B2C web sites", 2009 IEEE on Industrial Engineering and Engineering Management, 852-855. https://doi.org/10.1109/IEEM.2009.5372897.
  121. Kuo, H.M. (2010), "A behavioral model of the elderly Internet consumer: a case study", Int. J. Innov. Comput., Inform. Control, 6(8), 3507-3518.
  122. Kuo, H.M. (2010), "A study of consumer behavior model on auction websites", ICIC Expr. Lett., 4(1), 65-70.
  123. Kuo, H.M. (2010), "An observation of online auction difficulties for customers", An International Journal of Research and Surveys (ICIC-EL), 4(3).
  124. Kuo, H.M. (2011), "A study of merchandise information and interface", J. Marine Sci. Technol., 19(1), 3.
  125. Kuo, H.M. (2011), "Application of quality function deployment to improve the quality of Internet shopping website interface design", Int. J. Innov. Comput., Inform. Control, 7(1), 253-268.
  126. Kuo, H.M. (2012), "A novel viewpoint on information and interface design for auction web sites", Human Fact. Ergonom. Manuf. Serv. Indus., 22(4), 287-295. https://doi.org/10.1002/hfm.20274.
  127. Kuo, H.M. (2012), "Retracted: A study of a B2C supporting interface design system for the elderly", Human Fact. Ergonom. Manuf. Serv. Indus., 22(6), 528-540. https://doi.org/10.1002/hfm.20297.
  128. Lee, J.J., Yun, C.B., Lee, J.W. and Jung, H.Y. (2005), "Neutral network-based damage detection for bridges considering errors in baseline finite element model", J. Sound Vib., 280, 555-578. https://doi.org/10.1016/j.jsv.2004.01.003
  129. Lee, W.I. (2010), "Relationship between quality of medical treatment and customer satisfaction-a case study in dental clinic association", Int. J. Innov. Comput., Inform. Control, 6(4), 1805-1822.
  130. Lee, W.I. (2012), "A comparative study on the forecast of fresh food sales using logistic regression, moving average and BPNN methods", J. Marine Sci. Technol., 20(2),
  131. Lee, W.I. (2012), "Self-service technologies: A review of extant knowledge", Adv. Inform. Sci. Serv. Sci., 4(20).
  132. Li, G. (2023), "Lateral impact behaviour of concrete-filled steel tubes with localised pitting corrosion", Steel Compos. Struct., 47(5), 615. https://doi.org/10.12989/scs.2023.47.5.615.
  133. Li, H.N., Yi, T.H., Ren, L., Li, D.S. and Huo, L.S. (2014), "Reviews on innovations and applications in structural health monitoring for infrastructures", Struct. Monitor. Maint., Int. J., 1(1), 1-45. https://doi.org/10.12989/SMM.2014.1.1.001
  134. Li, Y.P. (2023), "Nonlinear thermal post-buckling analysis of graphene platelets reinforced metal foams plates", Steel Compos. Struct., 46(5), 649. https://doi.org/10.12989/scs.2023.46.5.649.
  135. Lin, C.L. (2009), "Improving the generalization performance of RBF neural networks", Exp. Syst. Appl., 36(10), 12049-12053. https://doi.org/10.1016/j.eswa.2009.03.012.
  136. Lin, C.W. (2013), "Application of a feature-based approach to debris flow detection by numerical simulation", Nat. Hazard., 67, 783-796. https://doi.org/10.1007/s11069-013-0605-2.
  137. Lin, C.W. (2013), "The construction of a high-resolution visual monitoring for hazard analysis", Nat. Hazard., 65, 1285-1292. https://doi.org/10.1007/s11069-012-0409-9.
  138. Lin, C.W. (2015), "Large-area, multilayered, and high-resolution visual monitoring using a dual-camera system", ACM Trans. Multimedia Comput., Commun. Appl. (TOMM), 11(2), 1-23. https://doi.org/10.1145/2645862.
  139. Lin, J.W. (2012), "Fuzzy statistical refinement for the forecasting of tenders for roadway construction", J. Marine Sci. Technol., 20(4), 9. https://doi.org/10.6119/JMST-011-0318-1.
  140. Lin, J.W. (2012), "Kalman filter decision systems for debris flow hazard assessment", Nat. Hazard., 60, 1255-1266. https://doi.org/10.1007/s11069-011-9907-4.
  141. Lin, J.W. (2012), "Modeling and assessment of bridge structure for seismic hazard prevention", Nat. Hazard., 61, 1115-1126. https://doi.org/10.1007/s11069-011-9969-3.
  142. Lin, J.W. (2012), "Potential hazard analysis and risk assessment of debris flow by fuzzy modeling", Nat. Hazard., 64, 273-282. https://doi.org/10.1007/s11069-012-0236-z.
  143. Lin, J.W. (2013), "A novel regression prediction model for structural engineering applications", Struct. Eng. Mech., 45(5), 693-702. https://doi.org/10.12989/sem.2013.45.5.693.
  144. Lin, M.L. (2008), "A gis-based local spatial autocorrelation for drought risk assessment", IGARSS 2008 IEEE Geoscience and Remote Sensing Symposium, 4, IV-830. https://doi.org/10.1109/IGARSS.2008.4779851.
  145. Lin, M.L. (2008), "Monitoring drought dynamics in the ejin oasis using drought indices from modis data", IGARSS 2008-2008 IEEE International Geoscience and Remote Sensing Symposium, 4, IV-834.
  146. Lin, M.L. (2009), "Fuzzy model-based assessment and monitoring of desertification using MODIS satellite imagery", Eng. Comput., 26(7), 745-760. https://doi.org/10.1108/02644400910985152.
  147. Lin, M.L. (2009), "Using MODIS-based vegetation and moisture indices", 2009 IEEE Geoscience and Remote Sensing Symposium, 4, IV-338. https://doi.org/10.1109/IGARSS.2009.5417382.
  148. Lin, M.L. (2010), "Application of fuzzy models for the monitoring of ecologically sensitive ecosystems", Eng. Comput., 27(1), 5-19. https://doi.org/10.1108/02644401011008504.
  149. Lin, M.L. (2011), "Spatial filtering analysis for quick drought assessment using MODIS images", 2011 IEEE Geoscience and Remote Sensing Symposium, 767-770. https://doi.org/10.1109/IGARSS.2011.6049243.
  150. Lin, M.L. (2011), "Using GIS-based spatial geocomputation from remotely sensed data for drought risksensitive assessment", Int. J. Innov. Comput., Inform. Control, 7(2), 657-668.
  151. Lin, S.G. (2006), "Modelling ionospheric effects with multiple reference stations for gps satellite surveying", 17th IASTED on Modelling and Simulation, ACTA PRESS ANAHEIM, Anaheim, 68-73.
  152. Liu, C.C. (2013), "Application of multi-scale remote sensing imagery to detection and hazard analysis", Nat. Hazard., 65, 2241-2252. https://doi.org/10.1007/s11069-012-0472-2.
  153. Liu, C.C., Kuo, Y.C. and Chen, C.W. (2013), "Emergency responses to natural disasters using Formosat-2 high-spatiotemporal-resolution", Nat. Hazard., 66, 1037-1057. https://doi.org/10.1007/s11069-012-0535-4.
  154. Liu, J. and Qiu, C. (2023), "Cyclic behavior of self-centering braces utilizing energy absorbing steel plate clusters", Steel Compos. Struct., 47(4), 523-537. https://doi.org/10.12989/scs.2023.47.4.523.
  155. Liu, K.F.R. (2009), "A qualitative decision support for environmental impact assessment using fuzzy logic", J. Environ. Inform., 13(2). https://doi.org/10.3808/jei.200900144.
  156. Liu, K.F.R. (2010), "combining fuzzy logic and data miningto predict the result of an EIA review", Int. J. Environ. Ecolog. Eng., 4(12), 628-632.
  157. Liu, K.F.R. (2011), "Health Risk Assessment for Sewer Workers using Bayesian Belief Networks", Int. J. Med. Hlth. Sci., 5(9), 383-387.
  158. Liu, K.F.R. (2011), "Hierarchical analytic network process and its application in environmental impact evaluation", Civil Eng. Environ. Syst., 28(1), 1-18. https://doi.org/10.1080/10286600903215078.
  159. Liu, K.F.R. (2012), "Applying Bayesian belief networks to health risk assessment", Stochast. Environ. Res. Risk Assess., 26, 451-465. https://doi.org/10.1007/s00477-011-0470-z.
  160. Liu, K.F.R. (2012), "Combining risk assessment, life cycle assessment, to estimate environmental aspects", Int. J. Life Cycle Assess., 17, 845-862. https://doi.org/10.1007/s11367-012-0407-x.
  161. Liu, K.F.R. (2012), "Combining scientific facts and significance criteria to predict the result of an environmental impact assessment review", J. Environ. Inform., 19(2). https://doi.org/10.3808/jei.201200212.
  162. Liu, K.F.R. (2013), "Incorporating the LCIA concept into fuzzy risk assessment as a tool for environmental impact assessment", Stochast. Environ. Res. Risk Assess., 27, 849- 866. https://doi.org/10.1007/s00477-012-0621-x.
  163. Liu, K.F.R. (2013), "Using Bayesian belief networks to support health risk assessment for sewer workers", Int. J. Environ. Sci. Technol., 10, 385-394. https://doi.org/10.1007/s13762-012-0136-5.
  164. Liu, K.F.R. (2015), "Using fuzzy logic to generate conditional probabilities in Bayesian belief network", Int. J. Environ. Sci. Technol., 12, 871-884. https://doi.org/10.1007/s13762-013-0459-x.
  165. Liu, M. (2023), "Nonlinear vibration of FG-CNTRC curved pipes with temperature-dependent properties", Steel Compos. Struct., 46(4), 553. https://doi.org/10.12989/scs.2023.46.4.553.
  166. Liu, S. (2023), "Reinforced concrete structures with damped seismic using multi-objective evolutionary niching ChOA", Steel Compos. Struct., 47(2), 147. https://doi.org/10.12989/scs.2023.47.2.147.
  167. Lu, L.T. (2003), "Active control for a benchmark building under wind excitations", J. Wind Eng. Indus. Aerodyn., 91(4), 469-493. https://doi.org/10.1016/S0167-6105(02)00431-2.
  168. Lv, H. (2023), "Influence of loading and unloading of hydraulic support on the caving property of top coal", Steel Compos. Struct., 48(1), 103-111. https://doi.org/10.12989/scs.2023.48.1.103.
  169. Lyu, J. (2023), "Study on the fire resistance of castellated composite beams with ortho hexagonal holes and different beam-end constraints", Steel Compos. Struct., 46(4), 539. https://doi.org/10.12989/scs.2023.46.4.539.
  170. Lyu, Y.F. (2023), "Lateral stiffness of corner-supported steel modular frame with splice connection", Steel Compos. Struct., 48(3), 321. https://doi.org/10.12989/scs.2023.48.3.321.
  171. Mahmoud, S.R. (2023), "Stability investigation plates via a novel hyperbolic RPT br", Steel Compos. Struct., 46(4), 471-483. https://doi.org/10.12989/scs.2023.46.4.471.
  172. Min, J. and Park, S. (2012), "Impedance-based structural health monitoring incorporating neural network technique", Eng. Struct., 39, 210-220. https://doi.org/10.1016/j.engstruct.2012.01.012.
  173. Mohamed, N. (2023), "Nonlinear stability of bio-inspired composite", Steel Compos. Struct., 46(6), 759. https://doi.org/10.12989/scs.2023.46.6.759.
  174. Rafatnia, S. (2019), "Fuzzy-adaptive constrained data fusion algorithm for indirect centralized integrated SINS/GNSS navigation system", GPS Solut., 23, 62. https://doi.org/10.1007/s10291-019-0845-z.
  175. Rafatnia, S.H. (2018), "In-move aligned SINS/GNSS system using recurrent wavelet neural network (RWNN)-based integration scheme", Mechatr., 54, 155-165. https://doi.org/10.1016/j.mechatronics.2018.08.001.
  176. Ryu, J.Y. (2017), "Experimental investigation of magnetic-mount PZT-interface", Struct. Monitor. Maint., Int. J., 4(3), 237-253. https://doi.org/10.12989/smm.2017.4.3.237.
  177. Setiawan, G.H. and Suryawan, I.K.D. (2020), "Analisis Kinerja Akurasi", Seminar Nasional Teknologi Komputer & Sains (SAINTEKS), 1(1), 579-583. https://doi.org/10.4156/aiss.vol3.issue6.6.
  178. Shen, C.W. (2011), "A fuzzy AHP-based fault diagnosis for semiconductor lithography process", Int. J. Innov. Comput., Inform. Control, 7(2), 805-816.
  179. Shih, B.Y. (2010,), "A preliminary study on design and development of template-based for license plate recognition system", 2010 Conference, 80-83. https://doi.org/10.1109/IEEM.2010.5674430.
  180. Shih, B.Y. (2012), "A robust license plate recognition methodology by applying hybrid artificial techniques", Int. J. Innov. Comput., Inform. Control, 8(10A), 6777-6785.
  181. Shih, B.Y. (2012), "Merged search algorithms for radio frequency identification anticollision", Math. Prob. Eng., 2012, Article ID 609035. https://doi.org/10.1155/2012/609035.
  182. Shih, B.Y. (2012), "NXT information and control on test dimensionality", 2012 Information Technologies in Medicine and Education, 1, 194-198. https://doi.org/10.1109/ITiME.2012.6291279.
  183. Song, C. (2023), "Application of computer methods on the frequency of the concrete beams experimentally and numerically", Steel Compos. Struct., 48(1), 19-25. https://doi.org/10.12989/scs.2023.48.1.019.
  184. Su, D.T. (2013), "The integration of nautical charts to reconstruct 3D harbor area models and apply assisted navigation", Nat. Hazard., 66, 1135-1151. https://doi.org/10.1007/s11069-012-0516-7.
  185. Su, R. (2023), "Axial behavior of square CFST encased seawater sea-sand concrete filled PVC/GFRP tube columns", Steel Compos. Struct., 47(6), 781. https://doi.org/10.12989/scs.2023.47.6.781.
  186. Su, T.J. (2011), "Applications of cellular neural networks to noise cancelation in gray images", Circuit., Syst. Signal Pr., 30, 1131-1148. https://doi.org/10.1007/s00034-011-9269-x.
  187. Sui, L. (2023), "Seismic performance evaluation of steel moment frames with self-centering energydissipating coupled wall panels", Steel Compos. Struct., 47(5), 663-677. https://doi.org/10.12989/scs.2023.47.5.663.
  188. Tagrara, S.H. (2023), "Mechanical and thermal stability investigation of functionally graded plates resting on visco-Pasternak foundation", Steel Compos. Struct., 46(6), 839. https://doi.org/10.12989/scs.2023.46.6.839.
  189. Taheri-Behrooz, F. and Torabia, M. (2023), "Low-velocity impact performance of the carbon/epoxy plates exposed to the cyclic temperature", Steel Compos. Struct., 48(3), 305. https://doi.org/10.12989/scs.2023.48.3.305.
  190. Tan, Z. (2023), "A novel design method for improving collapse resistances of multi-story steel frames with unequal spans using steel braces", Steel Compos. Struct., 47(2), 253. https://doi.org/10.12989/scs.2023.47.2.253.
  191. Tharwan, M.Y. (2023), "Refined quasi-3D shear deformation theory on Winkler/Pasternak/Kerr foundation", Mech. Bas. Des. Struct. Mach., 1-24. https://doi.org/10.12989/scs.2023.47.5.633.
  192. Tim, C. (2021), "Smart structural stability and NN based intelligent control for nonlinear systems", Smart Struct. Syst., 27(6), 917-926. https://doi.org/10.12989/sss.2021.27.6.917.
  193. Tsai, C.H. (2008), "Application of geographic information system to the allocation of disaster shelters via fuzzy models", Eng. Comput., 25(1), 86-100. https://doi.org/10.1108/02644400810841431.
  194. Tsai, C.H. (2010), "Sonar-based obstacle avoidance using a path correction method for autonomous control of a biped robot", 2010 IEEE Conference, 532-536. https://doi.org/10.1109/IEEM.2010.5674501.
  195. Tsai, C.H. and Chen, C.W. (2010), "An earthquake disaster management mechanism based on risk assessment", Tour. Manage., 31(4), 470-481. https://doi.org/10.1016/j.tourman.2009.05.008.
  196. Tsai, C.H. and Chen, C.W. (2011), "Development of a mechanism-A case study of the Hualien area", Scandinav. J. Hospital. Tourism, 11(3), 324-341. https://doi.org/10.1080/15022250.2011.601929.
  197. Tsai, C.H. and Chen, C.W. (2011), "The establishment of a rapid natural disaster risk assessment model for the tourism industry", Tour. Manage., 32(1), 158-171. https://doi.org/10.1016/j.tourman.2010.05.015.
  198. Tsai, P.W. (2016), "A novel control algorithm for interaction between surface waves and a permeable floating structure", China Ocean Eng., 30, 161-176. https://doi.org/10.1007/s13344-016-0009-7.
  199. Tsai, P.W. and Chen, C.W. (2014), "A novel criterion for nonlinear time-delay systems using LMI fuzzy Lyapunov method", Appl. Soft Comput., 25, 461-472. https://doi.org/10.1016/j.asoc.2014.08.045.
  200. Tseng, C.P. (2006), "Default risk-based probabilistic decision model on natural disasters risk control", Proceedings of the 17th IASTED International Conference on Modelling and Simulation, 219-223.
  201. Tseng, C.P. (2006), "Optimum arrangement between natural disasters insurance and risk control", Proceedings of the 17th IASTED International Conference on Modelling and Simulation, 184-187.
  202. Tseng, C.P. (2007), "Intelligent financial decision model of natural disasters risk control", Advanced Intelligent Computing Theories and Applications. ICIC 2007, https://doi.org/10.1007/978-3-540-74171-8_6.
  203. Tseng, C.P. (2012), "Retracted: Human factors of knowledge sharing intention: A preliminary study", Human Factor. Ergonom. Manuf. Serv. Indus., 22(4), 328-339. https://doi.org/10.1002/hfm.20507.
  204. Tseng, C.P. and Chen, C.W. (2012), "Natural disaster management mechanisms for probabilistic earthquake loss", Nat. Hazard., 60, 1055-1063. https://doi.org/10.1007/s11069-011-9889-2.
  205. Tseng, C.P., Chen, C.W. and Tu, Y.P. (2011), "A new viewpoint on risk control decision models for natural disasters", Nat. Hazard., 59, 1715-1733. https://doi.org/10.1007/s11069-011-9861-1.
  206. Wang, B.B. (2024), "Intelligent optimal grey evolutionary algorithm", Smart Struct. Syst., 33(5) 365-374. https://doi.org/10.12989/sss.2024.33.5.365
  207. Wei, J. (2023), "Axial compressed UHPC plate-concrete filled steel tubular composite short columns, Part I: Bearing capacity", Steel Compos. Struct., 47(3), 405. https://doi.org/10.12989/scs.2023.47.3.405.
  208. Wen, C. and Yang, G. (2023), "Stud connection in composite structures: development with concrete age", Steel Compos. Struct., 47(6), 729-741. https://doi.org/10.12989/scs.2023.47.6.729.
  209. Wu, J. (2023), "Predicting drying shrinkage of steel reinforced concrete", Steel Compos. Struct., 47(4), 539. https://doi.org/10.12989/scs.2023.47.4.539.
  210. Wu, P. (2023), "Experimental study on bearing capacity of PFCC column-RC", Steel Compos. Struct., 47(1), 19. https://doi.org/10.12989/scs.2023.47.1.019.
  211. Wu, Y.L. and Chen, C.W. (2013), "Examining the learning experiences of science training among Taiwanese Aboriginal adolescents", J. Baltic Sci. Edu., 12(3), 312.
  212. Wu, Y.L. and Chen, C.W. (2013), "Examining the micropolitical literacy of science intern teachers in Taiwan", J. Baltic Sci. Edu., 12(4), 440.
  213. Wu, Y.L., Tsai, Y.L. and Chen, C.W. (2014), "Examining the experiences of career guidance, vocational self-concept", J. Baltic Sci. Edu., 13(2), 182.
  214. Xiamuxi, A. (2023), "Study of the longitudinal reinforcement in reinforced concrete-filled steel", Steel Compos. Struct., 47(6), 709. https://doi.org/10.12989/scs.2023.47.6.709.
  215. Xu, J.Q. (2023), "Nonlinear resonances of nonlocal strain gradient nanoplates", Steel Compos. Struct., 47(6), 795. https://doi.org/10.12989/scs.2023.47.6.795.
  216. Yang, H.C. and Chen, C.W. (2012), "Potential hazard analysis from the viewpoint of flow measurement in large open-channel junctions", Nat. Hazard., 61, 803-813. https://doi.org/10.1007/s11069-011-0067-3.
  217. Yang, H.C.P. (2008), "Accuracy evaluation of a diagnostic test by detecting outliers and influential observations", COE 421-429.
  218. Yang, H.C.P. (2008), "Estimation on internal wave reflection in a two-layer fluid system by cumulative logistic regression model", J. Marine Sci. Technol., 16(1), 6.
  219. Yang, H.C.P., Alex, K.H.C. and Chen, T.H. (2008), "Evaluation of inference adequacy in cumulative logistic regression model", China Ocean Eng., 1, 5.
  220. Yeh, K. (2007), "Fuzzy control for seismically excited bridges with sliding bearing isolation", Advanced Intelligent Computing Theories and Applications. ICIC 2007, https://doi.org/10.1007/978-3-540-74171-8_47.
  221. Yeh, K. (2008), "NN robustness design of nonlinear structure systems", 2008 SICE Annual Conference, 733-736. https://doi.org/10.1109/SICE.2008.4654752.
  222. Yeh, K. (2009), "Stability analysis of time-delay fuzzy systems using fuzzy Lyapunov method", Intelligent Information and Database Systems, 243-248. https://doi.org/10.1109/ACIIDS.2009.85.
  223. Yeh, K. (2013), "Fuzzy control for a permeable floating structure", 2013 Third International Conference on Intelligent System Design and Engineering Applications, 796-799. https://doi.org/10.1109/ISDEA.2012.189.
  224. Yeh, K. and Chen, C.W. (2010), "Stability analysis of interconnected fuzzy systems using the fuzzy Lyapunov method", Math. Prob. Eng., 2010, Article ID 734340. https://doi.org/10.1155/2010/734340.
  225. Yeh, K., Chen, C.Y. and Chen, C.W. (2008), "Robustness design of time-delay fuzzy systems using fuzzy Lyapunov method", Appl. Math. Comput., 205(2), 568-577. https://doi.org/10.1016/j.amc.2008.05.104.
  226. Zhou, H., Cao, S., Zhang, S., Li, F. and Ma, N. (2023), "Design of a fuel explosion-based chameleon-like soft robot aided by the comprehensive dynamic model", Cyborg Bionic Syst., 4. https://doi.org/10.34133/cbsystems.0010.
  227. Zhu, T., Ding, H., Wang, C., Liu, Y., Xiao, S., Yang, G. and Yang, B. (2023), "Modified analytical AI evolution of composite structures with algorithmic optimization of performance thresholds", Steel Compos. Struct., 53(1), 103-114. https://doi.org/10.12989/scs.2024.53.1.103.